How do you create an array of clusters dynamically

I have created a cluster of 3 elements (string, I32, I32) dynamically then I want to create a 1D array of clusters dynamcally as well, but I am having trouble creating the array of clusters .  If anybody has any suggestions please help.  I will really appreciate it, Thank You

You are not building your array correctly.  What you are doing is taking a single element array of data you just read and replacing it with an empty data set.
Look at the following ways of doing this.  The one in the middle is only available in later versions of LV, but is supposed to handle memory more effeciently.  But, both the top and middle basically do the same; I preallocate memory for the rows and columns, then replaces the element of the array with the current row and columns data.  The output of the loop with have a 2-D array of all the data.
The bottom example does create an empty array before the loop runs and uses the indexing feature of the for loop to build the array for you.  All gve you the same result as far as data in your array is concerned.
Message Edited by Matthew Kelton on 10-05-2007 02:56 PM
Attachments:
Cluster Array.png ‏13 KB

Similar Messages

  • How do you create an array of any size(no limits).

    how do you create an array of any size(no limits). this array should hold BigInteger values.
    BigInteger[] array = new BigInteger[100000000]; //creates new array of BigIntegers array[0] = new BigInteger("6"); //puts "6" in
    array[1] = BigInteger.ZERO;
    but this type of an array can only hold a limited amount.

    Use a java.util.List, e.g., ArrayList or LinkedList.

  • How do you create an array without using a shell on the FP?

    I want to be able to read the status of front panel controls (value, control box selection, etc.) and save it to a file, as a "configuration" file -- then be able to load it and have all the controls set to the same states as were saved in the file. I was thinking an array would be a way to do this, as I have done that in VB. (Saving it as a text file, then reading lines back into the array when the file is read and point the control(s) values/states to the corresponding array element.
    So how do I create an array of X dimensions without using a shell on the front panel? Or can someone suggest a better way to accomplish what I am after? (Datalogging doesn't allow for saving the status by a filename, so I
    do not want to go that route.)

    Thanks so much m3nth! This definitely looks like what I was wanting... just not really knowing how to get there.
    I'm not sure I follow all the icons. Is that an array (top left with 0 constant) in the top example? And if so, that gets back to part of my original question of how to create an array without using a shell on the FP. Do I follow your diagram correctly?
    If I seem a tad green... well I am.
    I hope you understand the LabVIEW environment and icons are still very new to me.
    Also, I had a response from an NI app. engineer about this problem. He sent me a couple of VI's that he threw together approaching this by using Keys. (I still think you are pointing to the best solution.) I assume he wouldn't mind m
    e posting his reply and the VI's for the sake of a good, thorough, Roundtable discussion. So here are his comments with VI's attached:
    "I was implementing this exact functionality this morning for an application I'm working on. I only have five controls I want to save, but they are all of different data types. I simply wrote a key for each control, and read back that key on initialization. I simply passed in property node values to the save VI at the end, and passed the values out to property nodes at
    the beginning. I've attached my initialize and save VI's for you to view. If you have so many controls that this would not be feasible, you may want to look into clustering the controls and saving the cluster as a datalog file.
    Attachments:
    Initialize_Settings.vi ‏55 KB
    Save_Settings.vi ‏52 KB

  • How do you create a 2-d array%3F

    How do you create and write a 2-d array??  I have two operations in the same WHILE loop.  Each execution of the loop should generate a new  pair of values.  
    However, the BUILD ARRAY function only outputs a 1-d array to the WRITE TO SPREADSHEET FILE.vi. 
    Perhaps, more broadly, how does one put data into a 2-d array as it is collected?  I think I am building two arrays simultaneously below, but, what I really want is to build a single 2-d array.  Is this how you would do it?  It looks clumsy connecting sequential BUILD ARRAY's together.  Is this creating a 2-d array that I can search later by index and return the paired data? 
    Lastly, why does my front panel indicator only show data in the first column??  How do I make it display the data as it is collected across the rows?
    Thanks,
    Dave
    Solved!
    Go to Solution.
    Attachments:
    forum dec 12_2012 build 2d array.vi ‏13 KB

    dav2010 wrote:
    Sorry, very simple minded here...how do pairs go as a 1-d array?  I thought that (x,y) data must be a 2-d array...a column of "x's" and a column of "y's"?  Wouldn't a 1-d array just be all x's?  I admit I'm pretty new to understanding arrays.
    " build your 1D array from both scalars"  -->  how do you do this??  I cannot find a "convert to scalar" on the pallette.
    Also, here is the vi saved down to 2009, I think.
    Dave
    Here's a simpler way, just write out your X and Y as a 1D array each iteration. The Write will append your data as a column of X's and a column of Y's:
    or generate all your values and then write once:
    (fix the broken wire).
    “A child of five could understand this. Send someone to fetch a child of five.”
    ― Groucho Marx

  • How can I create a array with all files from a directory

    How can I create a array of files or varchar with all files from a directory?

    I thought the example could be improved upon. I've posted a solution on my blog that doesn't require writing the directory list to a table. It simply returns it as a nested table of files as a SQL datatype. You can find it here:
    http://maclochlainn.wordpress.com/2008/06/05/how-you-can-read-an-external-directory-list-from-sql/

  • How do I create an Array of Images

    Hi,
    I'm creating a program that basically is a slideshow. It has buttons that allow the user to switch from image to image, and has some audio in the background. I was wondering how I might create an array to store the images. I'm very new to Java, so please no detail is too small. I've just started using arrays, so I'm not sure where I would store the files or how to call the images. Please be descriptive and as dumbed down as possible :)
    Thanks for the help!

    I like ArrayList
    ArrayList<BufferedImage> myPics = new ArrayList();then just dump them in with add(myBufferedImage)
    If you'e not using BufferedImages then just change the BufferedImage to Image.
    to get, say the 6th image back out, then use:
    myBufferedImage = myPics.get(5);the index starts at 0 and should be addressed as 0 to (myPics.length - 1)

  • How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can"t find in any of the tutorials.

    How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can't find in any of the tutorials.

    The steps would be :
    - Add files from file menu > select pdf > add to site
    - Select the content (rectangle,text etc) and click on hyperlink dropdown > it should show you the added files list
    - Select the file you want to link
    Thanks,
    Sanjit

  • How do you create a new apple id on the iphone

    how do you create a new apple id on the iphone 4?

    Why do you want to do that?

  • How would you create a read/display only applicaiton montior role for SRM

    Hello,
    I was hoping to get some insight on how to create a display/read only SRM Application monitor role.  This role would be used by our Service Desk to perform basic trouble shooting before escalating.  Currently in our system it is tied into a tab named SAP Administration and has the capability of doing more than read.  How do you create a read version of this to only display the application monitoring in read mode? We currently have an SRP role that has the followiing auths below.  Would a EPP portal role need to be created and if so how>  Thank you for any assistance.
       Manually   BBP Component                                                BBP
              Manually   SRM: General Access Authorizations in EBP                    BBP_FUNCT
               Manually   SRM: General Access Authorizations in EBP                    T-SD59003000
                 Function in SRM (for Authoriza MON_ALERTS                                                                  BBP_FUNCT
    - Todd

    Hello,
    I was hoping to get some insight on how to create a display/read only SRM Application monitor role.  This role would be used by our Service Desk to perform basic trouble shooting before escalating.  Currently in our system it is tied into a tab named SAP Administration and has the capability of doing more than read.  How do you create a read version of this to only display the application monitoring in read mode? We currently have an SRP role that has the followiing auths below.  Would a EPP portal role need to be created and if so how>  Thank you for any assistance.
       Manually   BBP Component                                                BBP
              Manually   SRM: General Access Authorizations in EBP                    BBP_FUNCT
               Manually   SRM: General Access Authorizations in EBP                    T-SD59003000
                 Function in SRM (for Authoriza MON_ALERTS                                                                  BBP_FUNCT
    - Todd

  • How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

    how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

    To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry.  If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

  • HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad?  If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

    iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad?  If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.  I've seen reference to the  "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app.  I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for.  I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air.  Any help would be greatly appreciated.

    If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

  • How do you create a new account for a family member?

    My daughter and I both have Ipods, and want to setup SEPARATE accounts. Itunes 7 worked great, but now when we 'upgraded' to 8, it MERGED all our files. So I thought I had a separate account, but it turns out when I load a new song, it goes into HER Itunes files. She deleted all my info, and I REALLY want a separate account (that sticks).
    My songs are still in my directory under "Mikes Itunes", but when I reloaded them into what I thought was a fresh entry, it turns out it went into my daughter's Itunes file too! What is up with Itunes 8? and how can you create a TRUE separate account so I have control over MY songs!?

    First, let's make it easier to swap between accounts. In the Accounts pane of System Preferences click on the Login Options (after unlocking the pane). Enable fast user switching. This will put a new menu in the top right of the screen. You can then swap to the other account without having to log out of the current one.
    Log into the original account. Select the folder you want access from the other account and choose Get Info from the file menu. There is a section called Sharing & Permissions. You will need to click on the padlock to make changes. Click on the + to add permissions for the other user account by selecting the user account from list that appears. Set the permission for that account to read only. Once you have it listed then choose the "Apply to enclosed items" from the gear menu below the list. This should give you access from the other account to that folder and any folders contained in it.
    For iTunes you will want to do this to the Music folder, giving you access to the files below. From within iTunes you can select Add to Library from the file menu, and then select the music from the other account to that account's iTunes library. Once you have set up the new library whoever's library is the original can clean up the library to remove any music they don't want (now that it's in the new account).

  • How do you make an array of image icons and then call them?

    How do you make an array of image icons and then call them, i have searched all over the internet for making an array of icons, but i have
    found nothing. Below is my attempt at making an array of icons, but i cant seem to make it work. Basically, i want the image to match the value of the roll of the dice (rollVal)
    Any help would be greatly appreciated, some code or link to tuturial, ect.
    /** DiceRoller.java
    * Roll, print, Gui
    import javax.swing.*;
    public class DiceRoller extends JFrame
         private ImageIcon[] image  ;
         public String[] images = { "empty", "dice1.jpg",
                   "dice2.jpg", "dice3.jpg", "dice4.jpg",
                   "dice5.jpg", "dice6.jpg" };
         public Dice die;
         private int rollVal;
         public int rollNum;
         private JLabel j1;
         public DiceRoller(){
              j1= new JLabel("");
           die =new Dice();
           int rollVal;
           rollVal = die.roll();     
           image = new  ImageIcon[images.length];
         for(int i = 0; i < images.length; i++){
          image[i] = new ImageIcon(images);
         if (image!=null){
              j1.setIcon(image[rollVal]);
         System.out.println("Roll = "+die.roll());

    Demo:
    import java.awt.*;
    import java.net.*;
    import javax.swing.*;
    public class IconExample {
        public static void main(String[] args) {
            EventQueue.invokeLater(new Runnable(){
                public void run() {
                    launch();
        static void launch() {
            try {
                Icon[] icons = new Icon[6];
                for(int i=0; i<icons.length; ++i) {
                    String url = "http://www.eureka-puzzle.be/cast/images/dice" + (i + 1) + ".jpg";
                    icons[i] = new ImageIcon(new URL(url));
                display(icons);
            } catch (MalformedURLException e) {
                throw new RuntimeException(e);
        static void display(Icon[] icons) {
            JPanel cp = new JPanel();
            for(Icon icon : icons) {
                cp.add(new JLabel(icon));
            JFrame f = new JFrame();
            f.setContentPane(cp);
            f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            f.pack();
            f.setLocationRelativeTo(null);
            f.setVisible(true);
    }

  • How do you create an AcrobatXI zip file in windows 8.1?

    How do you create an AcrobatXI zip file in windows 8.1? from acrobat.com docs?  Sorry Not sure what community to ask this in this community?  The email provider I was using didn''t seem to want to accept it through Adobe Send the first time and since Adobe Send ends January 6, I am assuming a zip file is preferable..  I thought I had seen an Adobe Zip file somewhere but haven't been able to locate it. Any help appreciated.
    Thank you.
    Sherrie

    Hi Sherrie L,
    Adobe Send is Adobe's current solution for sending large files. (It's Adobe SendNow that's retiring soon.) Can you tell us what trouble you were running into using Adobe Send?
    There isn't a special version of Zip files for Acrobat, but you could reduce the PDF file size if you have Acrobat. Or, in Windows, you can create a Zip file by choosing File > Send to > Compressed (Zipped) Folder.
    Best,
    Sara

  • How can you create a spry menu bar with no background colour?

    How can you create the first level of a spry menu bar to have no colour? I have a coloured background right now and the colour matches when you load the site in Internet explorer but does not match in Firefox. Any suggestions are welcomed on how to fix this.
    Thanks!
    HK

    Here is the site:
    http://partnersnaturally.ca/
    I am learning with code, (obviously) so any feedback would be nice. I use dreamweaver CS4, but when I originally designed the site it was in a much older version of dreamweaver. I wonder if that could also be a cause. (besides human error)
    Thanks again,
    HK

Maybe you are looking for