How do you create down states in FW CS4

on previous versions you could just double click the button
and change the state by the tabs up top....i dont see that anymore
can someone pleas help...thanks

Open States Panel
Right click first state and choose Duplicate (add as many
states needed), then change the properties of the copied objects
from state to state.
h

Similar Messages

  • How can you create a writable PDF document from a PPT presentation ?

    How can you create a writable PDF document from a PPT presentation ? Upper part with the image , lower part with a free space in order to take notes for students during presentation or course.
    Thanks.
    B

    You can make a PDF file out of you notes and handouts but using the Adobe PDF printer.
    Open your PowerPoint Document then go to “File” “Print”
    Select ‘Adobe PDF” Printer
    Under slides, select which way you want to print. Note it will not print to a printer but to a PDF file.
    After then go into printer Properties and Setup PDF properties, do the following: (see second image below)
    Default: PDF/A 1-b
    Adobe Security: none (change as needed)
    Adobe Output folder: Prompt for Adobe file name
    Adobe Page size: Letter (change as needed)
    Check the following check boxes
    View Adobe PDf Results,
    Add Document Information,
    Rely on system fonts only,
    Delete Log files for successful jobs.
    Select OK
    A pop will ask you where you want to save the document. The file extension should be PDF. After giving the file name select okay and the file should popup as a PDF. Down side is if you want to speaker notes included then you will have to do another file, like wise with just screen shots then combine into one PDF document.
    I used Acrobat IX Pro. So to do this you need Acrobat IX or X Pro.
    Hope this will help.
    Tiger26

  • How do you create a column of sequenced dates in Numbers

    How do you create a column of sequenced dates in Numbers without typing in each date? For example: 01/05/15, 01/12/15, 01/19/15, 01/26/15, 02/02/15, etc.

    Hi Cha Ling,
    Another way,
    Enter your first two dates that show the desired interval- i.e. 01/05/15 and 01/12/15.
    Select both cells and choose fill from the contextual menu.
    Drag down to fill your column.
    quinn

  • How do you create a save as default folder for MP3 files used Captivate text to audio voices files?

    How do you create a save as default folder for MP3 files used Captivate text to audio voices files?

    Hi Ed
    Thank you for contacting me, however I already know how to save text to
    audio files via timeline using the Export feature.
    So my question was not entirely clear and I apologize for that.  To explain
    further, whenever I save a text to audio file, captivate takes me to a
    default save as folder where I then have browse back to my production
    folder where I am keeping all my Txt to Aud files.  This is very tedious
    process when you have alot of files to save.  So my question was is there a
    way to configure captivate so I can make my production folder the default
    file for whenever I save a Txt to Audio file through Export feature that
    the system automatically takes me to that production folder, and I am
    spared the long tedious process of saving the file manually to the
    prodcution folder I want.
    I have copy the pathway to the production folder in the URL filed in the
    Save As dialoge box and that workaround as cut the work down but I still
    have to paste that URL field to point the file to the right folder. So it
    would be nice if I could do everything automatically.  Microsoft makes this
    capability in their MS Office applications, so I was thinking Adobe might
    do the same thing.  Your help with this would be appreicated,
    Thanks
    Merrill Roberts
    Sr. Training Specialist
    SunGard Availability Services
    Direct 925-831-7730
    Mobile:415-215-9280

  • How do you create a new album in photos?

    How do you create a new album in photos?

    Copied from the iPad User Guide Book which is available as a free download in iBooks.
    Organizing photos and videos
    You can create, rename, and delete albums on iPad to help you organize your photos and videos.
    Create an album:  When viewing albums, tap Edit, then tap Add. Select photos to add to the new album, then tap Done.
    Note:  Albums created on iPad aren’t synced back to your computer.
    Rename an album
    Tap Edit, then select an album.
    Rearrange albums
    Tap Edit, then drag  up or down.
    Delete an album
    Tap Edit, then tap .
    Made an assumption without reading the post carefully - and then saw that your profile indicates that you are still running iOS 4.3.3. File this info for later use!
    Message was edited by: Demo

  • How do you create 2 Apple libraries

    How do you create 2 apple libraries?

    Click the icon to start iTunes and immediately press and continue to hold down the shift key until asked to Choose or Create a library. Click Create and browse to a suitable location. This will remain your active library until you use the same technique to Choose the original one.
    See: HT1589: How to open an alternate iTunes Library file or create a new one
    tt2

  • How do you create a new calendar.  I have ver 4.3

    How do you create a new calendar.  I have ver 4.3

    I believe this is a limitation of iOS 4. I think it was added in iOS 5.
    You have an iPad 2. You can update to iOS 6
    Connect your iPad to iTunes:
    iOS: How to update your iPhone, iPad, or iPod touch - Support - Apple
    Scroll down to the update using iTunes section

  • How do you create PopUp Layer Window?

    Hi!
    I have a question...
    How do you create PopUp Layer Window?
    PopUp Layer Window is a popup window that moves as an user
    scrolls up and down.
    And it cannot be blocked by popup bloacker.
    Please teach me!
    -p.b.p.

    Search the web for persistent layers.

  • How do you create additional free space on the volume containing the iPhoto library?  I have plenty of HD space.

    How do you create additional free space on the volume containing the iPhoto library?  When attempting to import images from a CD I get an "Insufficient Disk Space" message albeit there is plaenty of additional space on the hard drive.

    How much free space do you have on your hard drive?  Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

  • How would I create buttons states for MCs I am creating abstract MCs

    I am creating a generic website that would have abstract MCs that would load jpg or TXT fields for the user interface to allow for fast updates to the site. The MCs that would make up the user interface would be empty and load things into it using XML or PHP later on. How would I create button states for the user interface MCs.  I started creating a function for every MC button state but I thought there might be a more efficient way.
    would creating a array help in this case?
    and is using URLRequest the way to link to pages with in a movie well the flash movie that is the site it's self?
    /*---------------------------- THE START OF MY ACTION SCRIPT ------------------------------*/
    var waywardLogo_mc:MovieClip = new MovieClip;
    var theCollection_mc:MovieClip = new MovieClip;
    var newsPage_mc:MovieClip = new MovieClip;
    var whatthe#$@!doyouwant!?_mc:MovieClip = new MovieClip;
    /*---------------------------- onOver ------------------------------*/
    waywardLogo_mc.addEventListener(MouseEvent.ROLL_OVER,onOver);
    theCollection_mc.addEventListener(MouseEvent.ROLL_OVER,onOver);
    newspage_mc.addEventListener(MouseEvent.ROLL_OVER,onOver);
    whatthe#$@!doyouwant!?_mc.addEventListener(MouseEvent.ROLL_OVER,onOver);
    /*---------------------------- onOut ------------------------------*/
    waywardLogo_mc.addEventListener(MouseEvent.ROLL_OUT,onOut);
    theCollection_mc.addEventListener(MouseEvent.ROLL_OUT,onOut);
    newspage_mc.addEventListener(MouseEvent.ROLL_OUT,onOut);
    whatthe#$@!doyouwant!?_mc.addEventListener(MouseEvent.ROLL_OUT,onOut);
    /*---------------------------- onClick ------------------------------*/
    waywardLogo_mc.addEventListener(MouseEvent.CLICK,onClick);
    theCollection_mc.addEventListener(MouseEvent.CLICK,onClick);
    newspage_mc.addEventListener(MouseEvent.CLICK,onClick);
    whatthe#$@!doyouwant!?_mc.addEventListener(MouseEvent.CLICK,onClick);
    function onOver(event:MouseEvent):void
    event.target.alpha = .5;
    function onOut(event:MouseEvent):void
    event.target.alpha = 1;
    function onClick(event:MouseEvent):void
    event.target.URLRequest("");
    /*---------------------------- onover, onOut, onClick buttonModes ------------------------------*/
    waywardLogo_mc.buttonMode = true;
    theCollection_mc.buttonMode = true;
    newspage_mc.buttonMode = true;
    whatthe#$@!doyouwant!?_mc.buttonMode = true;

    click insert/new symbol, tick movieclip, assign a name, tick export for actionscript and in the class textfield enter a name (say ButtonClass) and click ok.
    attached to the first frame of your new movieclip, type stop() in the actions panel.  put whatever graphic you want on-stage for your button's up stage.  create another keyframe, label it "over" and put whatever graphic you want for button's over state on-stage.
    in a layer above those graphics, you'll probably want to add a dynamic textfield so each of your buttons can have different text.  assign the textfield and instance name (say tf) and extend its timeline to the last frame of your movieclip button.
    then when you want to create a button, on your timeline you can use:
    var b:ButtonClass=new ButtonClass();  // these two lines need to be entered for each button
    buttonhandlerF(b,someX,someY);
    //-------code between dotted lines only needs to be entered once no matter how many buttons you add --------------------
    function buttonhandlerF(b:ButtonClass,x:Number,y:Number){
    b.addEventListener(MouseEvent.MOUSE_OVER,overF);
    b.addEventListener(MouseEVent.MOUSE_OUT,outF);
    b.x=x
    b.y=y
    addChild(b);
    function overF(e:MouseEvent){
    e.currentTarget.gotoAndStop("over");
    function outF(e:MouseEvent){
    e.currentTarget.gotoAndStop(1);
    //-------code between dotted lines only needs to be entered once --------------------
    // you'll also want to create a click listener and listener function
    the code between the dotted lines is amenable to being added to a ButtonClass.as class file if want to expand your capabilities.

  • How do you create a 2-d array%3F

    How do you create and write a 2-d array??  I have two operations in the same WHILE loop.  Each execution of the loop should generate a new  pair of values.  
    However, the BUILD ARRAY function only outputs a 1-d array to the WRITE TO SPREADSHEET FILE.vi. 
    Perhaps, more broadly, how does one put data into a 2-d array as it is collected?  I think I am building two arrays simultaneously below, but, what I really want is to build a single 2-d array.  Is this how you would do it?  It looks clumsy connecting sequential BUILD ARRAY's together.  Is this creating a 2-d array that I can search later by index and return the paired data? 
    Lastly, why does my front panel indicator only show data in the first column??  How do I make it display the data as it is collected across the rows?
    Thanks,
    Dave
    Solved!
    Go to Solution.
    Attachments:
    forum dec 12_2012 build 2d array.vi ‏13 KB

    dav2010 wrote:
    Sorry, very simple minded here...how do pairs go as a 1-d array?  I thought that (x,y) data must be a 2-d array...a column of "x's" and a column of "y's"?  Wouldn't a 1-d array just be all x's?  I admit I'm pretty new to understanding arrays.
    " build your 1D array from both scalars"  -->  how do you do this??  I cannot find a "convert to scalar" on the pallette.
    Also, here is the vi saved down to 2009, I think.
    Dave
    Here's a simpler way, just write out your X and Y as a 1D array each iteration. The Write will append your data as a column of X's and a column of Y's:
    or generate all your values and then write once:
    (fix the broken wire).
    “A child of five could understand this. Send someone to fetch a child of five.”
    ― Groucho Marx

  • How do you shut down apps on the 5s?

    How do you shut down apps on the 5s?

    Been asked a thousand times in the past two days... look to your right under "More Like This" for related discussions.   ------->
    Or, take a look at the User Guide

  • How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can"t find in any of the tutorials.

    How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can't find in any of the tutorials.

    The steps would be :
    - Add files from file menu > select pdf > add to site
    - Select the content (rectangle,text etc) and click on hyperlink dropdown > it should show you the added files list
    - Select the file you want to link
    Thanks,
    Sanjit

  • How do you create a new apple id on the iphone

    how do you create a new apple id on the iphone 4?

    Why do you want to do that?

  • How would you create a read/display only applicaiton montior role for SRM

    Hello,
    I was hoping to get some insight on how to create a display/read only SRM Application monitor role.  This role would be used by our Service Desk to perform basic trouble shooting before escalating.  Currently in our system it is tied into a tab named SAP Administration and has the capability of doing more than read.  How do you create a read version of this to only display the application monitoring in read mode? We currently have an SRP role that has the followiing auths below.  Would a EPP portal role need to be created and if so how>  Thank you for any assistance.
       Manually   BBP Component                                                BBP
              Manually   SRM: General Access Authorizations in EBP                    BBP_FUNCT
               Manually   SRM: General Access Authorizations in EBP                    T-SD59003000
                 Function in SRM (for Authoriza MON_ALERTS                                                                  BBP_FUNCT
    - Todd

    Hello,
    I was hoping to get some insight on how to create a display/read only SRM Application monitor role.  This role would be used by our Service Desk to perform basic trouble shooting before escalating.  Currently in our system it is tied into a tab named SAP Administration and has the capability of doing more than read.  How do you create a read version of this to only display the application monitoring in read mode? We currently have an SRP role that has the followiing auths below.  Would a EPP portal role need to be created and if so how>  Thank you for any assistance.
       Manually   BBP Component                                                BBP
              Manually   SRM: General Access Authorizations in EBP                    BBP_FUNCT
               Manually   SRM: General Access Authorizations in EBP                    T-SD59003000
                 Function in SRM (for Authoriza MON_ALERTS                                                                  BBP_FUNCT
    - Todd

Maybe you are looking for