How do you determine the duration of the project?

I want to know the duration of each project that I've
created. When I open the project, there is an information section
that tells me the size of the project, the time, the resolution,
number of slides, etc. It is telling me that this project is 5
minutes and 30 seconds. When I click on advanced audio, it lists
the time length of each slide. When I add those numbers up, the
presentation is over 11 minutes. Which one is correct. What is the
best way to find out the length of a project?

Hi Brock22
I think I'd lean toward using what you see in the information
section.
Consider this:
What you see in the advanced audio part is showing all audio
used in the .CP file. this means background audio (which normally
plays at the same time as other audio) as well as object level
audio (if you decide to show object level audio by clicking the
proper check box). And object level audio plays at the same time as
slide and background audio.
Hopefully this helps... Rick

Similar Messages

  • How do you determine what version of  the Darwin Kernel, iOS 4.3.3 uses in iPod Touch?

    I tried looking this up in "Settings" > "General" > "About" but it doesn't give me this information.
    Someone told me that he has Darwin Kernel 11.0.0 for his iPod Touch running iOS 4.3.3, but his iPod Touch is jailbroken. My iPod Touch isn't jailbroken, and I want to know what version of Darwin Kernel it is running. On Wikipedia, someone documented that the Darwin Kernel 11 begins with iOS 5--for a jailbroken iOS 5 device. I find this odd if my buddy has Darwin Kernel 11.0.0 for his device running iOS 4.3.3. Well, as all intelligent people know, we can't trust Wikipedia completely.

    meredithlr wrote:
    Why do apple refer to the products by generation and then not actually include that information on the product?
    beats me.
    you can inform Apple of your displeasure by leaving a comment via iPod Touch Feedback.

  • How do you determine the optimal size for Mozilla Firefox?

    How do you determine the optimal size for cache in Mozilla
    Firefox? I am using Firefox 7.0.1 on a 64-bit Windows 7 Ultimate operating system with 3GB RAM and 300 GB hard drive, but I have other computers running Windows XP. If the answer doesn't apply to all current versions of Firefox on all supported Windows operating systems, please explain the differences. Is there a formula for calculating the best cache size?

    I found that the best idea is to let Firefox decide that itself.

  • How do you determine the firmware version for a laptop docking station?

    How do you determine the firmware version of a HP docking station?
    Laptop Model: HP 2740p
    OS: 64bit Windows 7
    Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
    Thank you for any assistance.
    Alvin

    atenpo wrote:
    How do you determine the firmware version of a HP docking station?
    Laptop Model: HP 2740p
    OS: 64bit Windows 7
    Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
    Thank you for any assistance.
    Alvin
    WA995AA#ABA shows to be a hard drive, not a docking station

  • How do you determine the picture that is shown on iTunes for your podcast?

    How do you determine the picture that is shown on iTunes for your podcast? Is that done in iWeb or Garagetunes?

    That is a supported format,
    Pull the battery while the device is ON, replace after a minute, Let the device reboot 1-3 min,
    see if the problem is fixed,
    If not we may have to reload the device OS to get back the missing option.
    Thanks,
    If you need more info please ask!  If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • How do you Determine the Largest Size/Fastest Speed Hard Drive

    In general, how do you determine the maximum hard drive size/speed you can upgrade to?

    As long as the drive your are considering physically fits as already stated there is no maximum size you can install. Please complete your profile so we know what machine you have.
    If your machine is covered by a warranty or AppleCare I would recommend against installing another HD as this may invalidate the warranty. I would recommend in that case using a Firewire 800 external HD instead.
    Regards,
    Roger

  • HT201209 How do you determine the funds left on an itunes card?

    How do you determine the funds left on an itunes card?

    If it hasn't been redeemed, the value is the face value.
    If it was redeemed, the value on the card is zero. 
    When you redeem an iTunes gift card, the full value is immediately transferred as a credit to the account you are using when you do the redemption.  After that point, the card is worthless.

  • How can I determine what dns server the wifi client use within airport

    How can I determine what dns server the wifi client use within airport
    I want to use dns servers other then the one that airport extreme is using. For example I got the 172.16.1.1 (the default gateway - airport extreme), but I want to use the office dns servers, that are in a 10.x.x.x range.
    Is there a possibility?
    Thanks and happy eastern

    The Airport Extreme uses the DNS servers assigned by the network that it connects to. Is you Airport Extreme on the 10.x.x.x network? if it is then you are already using the 10.x.x.x DNS servers. Check your Airport Extreme with the Airport Utility and you will see in the Internet tab, the DNS servers used. The devices connecting to the Airport Extreme are assigned a DNS address of the Airport Extremes IP, In your case 172.16.1.1 but all DNS searches and resolution are done with the DNS servers you see in the Airport Extreme.
    If you want to use some other DNS then you can override in the Airport Extreme which will be used by all devices connecting too the Airport Extreme, Or you can edit the DNS address in each devices wireless settings.

  • Why i cannot know how much is the duration of the call WHILE calling someone?

    Why i cannot know how much is the duration of the call WHILE calling someone?

    You can. Look at the screen.

  • How do you disable voice announcements on the Gusto 3 ?

    How do you disable Voice Announcements on the Gusto 3 >

        Thanks for reaching out to us, tobrien459! May I ask what readouts you are getting in order for me to make sure I provide you with the most accurate information?
    I'm thinking you are looking for this:
    From the Home screen, press the Left Soft Key
    Menu > Settings > Accessibility > Easy Set-up.
    2. Follow the screen prompts to choose settings for
    Full Readout, Menu Readout, Digit Dial Readout,
    Alert Readout, TXT Message Readout, Browser
    Readout, and Flip Open & Talk
    Let me know if this is what you need.
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

  • How do you encript voice memos in the itunes library so no one else at the computer can listen to them?

    How do you encrypt voice memos in the itunes library so no one else at your computer can listen to them?

    iTunes has no ability to encrypt anything. You'll need to search for encryption software appropriate for whatever type of computer you have. Or, you could set up separate accounts for other users of your computer and password your account.

  • How do you shut down apps on the 5s?

    How do you shut down apps on the 5s?

    Been asked a thousand times in the past two days... look to your right under "More Like This" for related discussions.   ------->
    Or, take a look at the User Guide

  • How do you delete duplicate photos in the photo section of your iPad?

    How do you delete duplicate photos in the photo section of your iPad?  My iPad has duplicated n tripled my photos n want let me delete them.  I can delete photos from any other section but not in photos, this is taken up all my memory. Help!!

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • Solaris 11 IPS:  How do you post multiple versions of the same package?

    How do you post multiple versions of the same software package on a single IPS instance(port)? Oracle was able to do it here with versions 151 and 175 of S11:
    http://pkg.oracle.com/solaris/release/
    Unfortunately, based on my searches, no where in the documentation (http://www.oracle.com/technetwork/server-storage/solaris11/technologies/ips-323421.html) does it explain to the development community how this is done. The best I can do is create pkg repo instances on different ports to host each different software version.
    We are trying to deploy an IPS repository for our drivers and utilities that our customers can link to and pull updates from. We have been able to post a software package to the repository using the command:
    pkgsend publish -s http://localhost:1234 -d ./ Appv1.p5m
    This posts the package on the IPS repository instance at port 1234 on the server. However, we would like to post multiple versions of the package on the server at the same URL. Why the same URL? So that our customers and end-users need only point to a single URL to pull down our software rather than having to add a new URL to the publisher list each time we have an update. We want at least 5 of the previous software versions to be available on the server. Posting each version of the application or driver on a different IPS instance on a different port will require customers to add multiple URLs to their publisher list and they also will not be able to initiate remote scans for updates.
    Has anybody been able to do this? Is any documentation forthcoming?
    Edited by: user13489824 on Jun 25, 2012 10:17 AM

    dhduvall: Thanks for your response. Yes, one would think that as long as the version numbers are different, you should be able to accumulate multiple versions of a package in a repository. It looks like Oracle has done it in their S11 repository unfortunately, as far as I know, they have not shared the steps on how to do this. I would like to publish two versions of the same package. I.E. two different manifests with two different fmri.pkg version strings and two different binaries.
    If I publish one package after another like this:
    pkgsend publish -s http://localhost:1234 Appv1.p5m
    pkgsend publish -s http://localhost:1234 Appv2.p5m
    Then only the second package shows up in the repository, as if it over-wrote the first one.
    Running pkgsend with two manifest, like this:
    pkgsend publish -s http://localhost:1234 Appv1.p5m Appv2.p5m
    Will cause pkgsend to combine the packages and manifests as if they were a single package... not what I am trying to do.
    Both approaches are complete without errors but neither achieves what I am trying to do.
    alan.pae: Thank you. Unfortunately, the link didn't really help. I've read Oracle's white papers and IPS developer guide so I'm familiar with the topics covered.
    Lex: Yes, I know. I specified the versions in the pkg.fmri value string.

  • How do you manually manage podcasts with the new iTunes?

    Like the subject line says: How do you manually manage podcasts with the new iTunes?
    With the previous version of iTunes, when I plugged in my iPod, I could select the iPod, select podcasts, and manually delete episodes. With the new iTunes, I can't select individual episodes when looking at my iPod through iTunes. Is my only option to Sync? If so, why is that my only option?
    This question probably has a simple answer, and I'm just not seeing it.

    Rock,
    I think I figured out a way to do what you want to do - which is the same way that I use Itunes with my Ipod. (My Itunes libary was destroyed last year so I can no longer auto synch my Ipod as I would lose thousands of songs).
    Funnily enough, I discovered this new way of manually moving podcasts while trying to figure out what cpragman was trying to say (I never could - he must be smarter than me, as I couldn't get his method to work).
    1. Open up your Itunes in your regular Library view. Choose Pocasts from the left hand side (either in the sidebar if you have that enabled, or from the little "radio" icon if you don't.)
    2. Mouse to the podcast you want to place on your Ipod.
    3. Right-click it.  A long menu will pop up.
    4. Move to the "Add to Playlist" option.  As you hover, all your playlists will be visible. But at the very top will be the name of your Ipod itself (whatever you named it originally).  Choose THAT name, and voila! That podcast will now copy to your Ipod and be easily available when you disconnect.
    A nice feature of this method is that you can shift-click several podcasts at once and do the same thing, and all your selected podcasts will copy over (if you're like me and update your Ipod only every few weeks).
    Hope this helps - let me know if it works for you!

Maybe you are looking for