How do you do double sided printing with eprinting with a hp officejet pro 8500a premium?

How do I do double sided printing with eprint?  Why is there no option to change it online?  I have
HP Officejet Pro 8500A Premium

Hi,
Automatic Two-Sided printing is not currently supported by the ePrint Service, as you may find any of the service capabilities and limitations listed below:
Duplexing (printing on both sides of the page) is not supported.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02641898&cc=us&dlc=en&lc=en&product=4083971&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • How can I control automatic print head cleaning every time my Officejet Pro 8500A Premium starts up?

    In general we really like our new Officejet, but we're very frustrated by the automated start up procedure.  Every time we turn it on it does a self check and then cleans the print heads.  It's bothersome for two reasons: 1) We want to print quickly, not wait for 5 minutes.  2) We're worried that all this cleaning is using up our valuable ink.
    We recently had to replace all the color print cartridges, and I think one cause for the other's depletion was all this cleaning.
    We're using HP cartridges.
    It's possible that this printer is intended for an office environment where it just stays on 24x7.   For our occasional use, we normally turn it on when we need it and turn it off when we're done. If the power consumption is low enough (less than 5 watts) I'd consider leaving it on as a possible work-around.
    I did my best to search FAQ and postings to see whether there was already an answer to this issue - but couldn't find one.
    This question was solved.
    View Solution.

    cattyprinter wrote:
    1st installation failed --waited 3 weeks to have another go --installed on line all working --So Notation said
    scans ok  fax set up ok .On start up IT goes thru ALIGNING PRINTHEAD  --not one here print done and 3 1/2 cartridges GONE .Tooooo BEEEEE expensive to use   Where is the users manual --?None only double side page of wire connections  --a book of one page english and balance in goobly **bleep** .Never again will I spend my measely pension on a HP printer  Who is going to replace my cartridges ? Try and have a telephone query  OH NO no speak only info email that says this is generated email with no info! Talk about easy money for rubbish --tell your mates HP is a NO GOER        -:manmad:
    There should have been a manual on the included CD.  You can also download a manual from HP here. 
    If you need to Contact HP you can find phone numbers here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Need MICR compatible ink cartridge for Officejet Pro 8500A Premium to print checks.

    I need to print bank accepted checks on my Officejet Pro 8500A Premium printer using MICR ink.  I cannot find a compatible MICR cartridge for this printer.  There are MICR cartridges available for other HP printers.  Does anyone know of a compatible cartridge? 

    Try using the multilevel uninstaller in the HP software driver CD. Browse the contents of the CD and look for the "Util" folder and open it. In the "Util" folder, open the "CCC" folder. In the "CCC" folder, double click on the "Uninstall_L3.bat" file. Don't use the "Uninstall_L4.bat" file. It could remove files that have shared dependencies with the HP software. Restart the computer and then reinstall the software afterwards. Let me know if it worked or not.
    Binary_Zen (worked at HP )
    Click the white Kudos star to say thanks
    Please mark Accept As Solution if it solves your problem

  • How to get the Double-sided print in SMARTFORM?

    Hi Folks,
    Can u  explain me , how to get the Double-sided print ?
    I create two pages : Page 1 and Page 2.
    Page 1 contains Main Window and some text data in it.....
    Page 2 contains  a secondary window with some TERMS & CONDITIONs data.
    Print Mode Settings:
    Page 1     Print Mode : D
    Page 2     Print Mode : Space
    I maintained all the above in my Smartform ,
    but i couldn't get my second page at all  and Double-sided print also....
    Is there any settings missing or any to be maintained ?
    GIve me a Solution....

    HI Surender,
    Check this one
    http://www.sdn.sap.com/irj/sdn/printing?rid=/library/uuid/90edfc78-dfc9-2b10-dcbe-d4612972ceb9&overridelayout=true
    Regards
    Ram

  • How do I print panoramic photos on an HP Officejet Pro 8500A Plus printer?

    How do I print panoramic photos on an HP Officejet Pro 8500A Plus printer?

    Thank you for this link! Actually I installed a brand new Windows 8 system in January 2014 and then bought the HP Officejet Pro 8600 Plus printer a few days later. To install this printer I did not use the CD that came with it but already used this link. Just to be sure that I have the latest version I again reinstalled the driver. The result is definitive: You cannot print common photo paper sizes like 4x6,  5x7, 8x10, etc. via a PC using photo SW like HP Photo Creations, MS Gallery, Windows Photo Viewer or any other SW on a HP Officejet Pro 8600 Plus. The reason is most likely that HP marketing decided that an Officejet should not be smart enough for photos, after all the company sells also Photosmarts. Because you cannot create your own formats  you are limited by the driver to what is typically available in an office, in this case:  A4, Letter, legal, Statement, Executive, A4, A5, A6, B54 (JIS), Envelopes #10-DL-C5-C6-A2-Monarch, Japanese Postcard, Japanese Envelope Chou #3-#4, L, 2L, O**bleep**u hagaki, Index Card Letter-A4, Edge-to-Edge Letter-A4, Env. Japanese No 3-No 4 and that's it, not more. Thank you anyway for trying to help me but in this case only the SW developers in HP can help.It would be great to be able to print from time to time a 4x6 photo on this printer like I would do.Copying photos on a USB stick or on a SD card first and then use this way to print on the printer is too cumbersome for me.

  • Can I activate ePrint on my HP Officejet Pro 8500 Premium printer for use with my smartphone​?

    Can I activate ePrint on my HP Officejet Pro 8500 Premium printer for use with my smartphone? Any instructions?

    Yes.  You can do that
    Just follow the instructions for the appropriate device on this HP web document. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I have an HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n.

    I have an HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n.  I’m trying to set up HP Connect, but every time I create and account it tell me to log in using my Snapfish password.  When I use my “valid” Snapfish password, it comes back asking "invalid password".  How do I correct this?
    If I'm not on the correct board, please let me know which one I should use.
    Thanks
    This question was solved.
    View Solution.

    Hi. You are on the proper board!  Unfortunately to fix the account mis-match issue you are having you will need to share personal information.  To protect your identify and the security of your account I will private message you with what HP will need in order to get your Snapfish/HP Connected accounts synced up so you can use the web services!    
    Thanks!
    Although I am an HP employee, I am speaking for myself and not for HP

  • Officejet Pro 8500A Premium will not print from my laptop

    I have an Officejet Pro 8500A Premium. I jus had ot reload my driver thinking it would resolve the below issue but it did not. The connection string is  laptop -> docking station -> ethernet to router -> ethernet to printer.  On my laptop I can see the ink levels of the printer so there is a connection but when I attempt to print and select the Officejet 8500 (non fax) printer, it attempts to print to the 8500A fax and then pops up with a fax box.  
    Additional Information:
    I have tried the following:
    - Changed the port for the 8500A fax
    - Tried to set the default printer from the fax to the network printer - received an error message: Operation could not be completed (error 0x0000709). Double check the printer name and make sure that the printer is connected to the network.
    This question was solved.
    View Solution.

    Hello coolhandluke2,
    Welcome to the HP Forums.
    I see that you are having issues when attempting to print from your Laptop.
    I also see that you are getting an error 0x0000709.
    I do have a few suggestions we can try.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I am also going to give you a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error Me....
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page.

    HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page.  I continually get a message that the computer cannot communicate with the printer.   Not only will it not print docs, it will not print web pages using IE 11 or Google Chrome.
    I've used Print and Scan Doctor, it always reports there are no issues and prints a test page even though I can't print anything else. 
    Each time I want to print, I must reboot the computer.  After reboot I have one chance to print.   This problem started February 15, 2015.  
    My operating system is Windows 8.1.   I have unintalled the HP software, rebooted, then reinstalled the software:
    OJ8500_A910_1315-1.exe
    HP Print and Scan Doctor - HPPSdr.exe
    HPSupportSolutionsFramework-11.51.0049.msi
    All versions were last downloaded on April 4, 2015.
    I have a home wireless network (Ubee DDW366 router).  All other devices in the house will print to the 8500A printer without issues:  2 Toshiba laptops, 2 Android phones, and 1FireHD.
    The desk top is installed with a Netgear Network card I don't know the model, but I had it tested by a PC Tech to confirm that the card is working.   The card and Windows 8.1 were installed on January 3, 2015.
    I have run virus scans and malware scans.  Each time they show there are no issues with my desktop.  What kind of desktop? Specifically made to my specs from store parts. . . no brand name computer.  ASUS Motherboard P6X580 Premium.  Now I will probably get hacked!
    I am at my wits end.  And it is frustrating when I need to make a print of something and the system locks up.  I often resort to screen printing to a word document to save in order to reboot. . . .but then I lose all sorts of capabilites when I salvage what I needed.  Also this is a time consumer.
    This printer has served us well for two years and I have expensive cartridges waiting; another two rounds of refills.
    Help?
    Addendum:  I can scan using HP Printer Assistance.  I open the HP Printer assistant, it "retrieves" info from the printer, then I select "scan a document or photo" and the printer responds.   I have no trouble with scanning.
    This question was solved.
    View Solution.

    Hi ArielAce , thanks for getting back to me!
    I would recommend downloading and running the HP Print and Scan Doctor.
    Please keep me posted!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Error message C00E0060 on my officejet Pro 8500A Premium printer

    HI, Error code C00E0060 appears on discplay screen brieflky then change to blank display with the icon lights blinking.  Powering on and off the printer won't do anything.  Can't figure out any solution. I'm not able to use of the printer functions. I'd appreciate any solution you can share me.  Thanks

    Welcome ,  I saw your post regarding the problems you are having with your Officejet Pro 8500A premium getting an Error code C00E0060, and I found some information about it.
    The error you are describing could be an issue with an ink cartridge or with the printer. To narrow down and determine which is having trouble can you try the following an let me know the results;Remove all of the ink cartridges, does the message change to 'Replace the (K) (C) (M) (Y) Ink Cartridge'?Put only the black ink in,  does the message change to'Replace the (C) (M) (Y) Ink Cartridge'?Remove the black and put only one colour ink in,  does the message change to reflect the change?Remove the colour, and test each one individually. 
    When you have the ink cartridges removed, you might want to try a hard reset. To do so, leave the printer on and unplug the power cable from the back of the printer. While it is unplugged, you can hold down the power button on the printer for about 10-15 seconds to release any built up power. Then plug the printer back in and see if the error goes away. If the error message doesn't change when you do any of the above steps, it would mean that it is a fatal error with hardware, as mentioned in this similar post; Error Code C00E0060. Is the printer connected directly to a wall outlet or is it in a surge protector or a power bar? We want to connect it to a wall outlet just so we can eliminate the power source as the root cause. See this document for more information about Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector (Note: This document is not limited to Laserjet printers.)   Please let me know if these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!   Thanks, 

  • HP Officejet pro 8500A premium, all-in-one printer, scanner problems

    I have an HP Officejet pro 8500A premium, all-in-one printer.
    Tried uninstalling using the HP supplied uninstall software and installed recommended OSX 10.8 software for this device.
    I use wireless scanning. Scanner only scans the first page then shows an error.
    Anyone have this problem as well and any possible solutions?
    Thanks

    The HP Scan works just fine in Mountain Lion for me. Always has.
    OfficeJet Pro 8500 A909a
    I think the original poster needs to reinstall the latest software for the printer that came with his printer or directly from HP. Then, install the Apple HP updates.
    When he unistalled the HP software, it may have removed the software needed for HP Scan to work properly.
    The last software I installed from HP was -> HP_Installer_Officejet_Full_Group05_10.3.dmg
    Yes, there have been Apple HP updates, but they never stopped my HP Scan from working.

  • How do you make double sided copies?

    i have laser jet pro cm 1415 fnw color mfp
    how do i make double sided copies,? from double sided paper, and from one sided paper?

    Hello,
    Thanks for the post.  With this model you do have the ability to manual duplex.  I've attached a document below with the steps to walk through this process.  Good Luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02244601&tmp_task=useCategory&cc=us&dlc=en&lang​...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • How do I enable double sided printing on my iPad through the HP ePrint app?

    HP Laser jet 1102w
    I have Windows 7 64 bit and a original iPad.
    I would like to save paper when I am printing from my iPad. Is there a setting to enable double-sided printing when printing from an iPad using the HP ePrint app?

    Hi,
    Printing a manual duplex printing is not supported by the HP ePrint app or AirPrint as well, it can only be done with printers who provide automatic two-sided printing.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How do I print from my iPhone to my Officejet Pro 8500A?cc=us

    I have an HP Officejet Pro 8500a, I would like to print from my iPhone 4, how do I set it up?

    The printer must be connected to a router, either wired with Ethernet or wirelessly.
    On the front of the printer, find and enable "Web Services".  If this is successful you will get a printout of your printer's email address and other details.
    Now, make sure your iPhone has the latest version of iOS and connected to your wireless router (wirelessly, obviously).  Now, it should work!
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How to Change Wi-Fi Channel Used by Wireless Direct on HP Officejet Pro 8600 Premium?

    I would like to change the Wi-Fi channel that is used by Wireless Direct between my Lenovo laptop and my HP Officejet Pro 8600 Premium to reduce interference from other nearby users of Ch. 6 in my condo complex. (I am not using a wireless router setup to connect to the printer.)
    Is this possible?  If so, how?

    Ah... ok.  You are using the Wireless Direct with the printer.  You computer is wireless to channel 6.  That is all you can do unless you changed the router's wireless channel which will only automatically switch on your computer. 
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

Maybe you are looking for