How do you do fast motion on Imovie on your ipad?

I've tried for hours searching and asking questions!!! Any one that can help please do so!

Here is one app and there are others, mostly free, similar to it on itunes.
http://itunes.apple.com/us/app/activity-monitor-top-free/id445279837?mt=8
From an ipad forums post :
If you experience your iPad running a bit slow you probably have a ton of applications running in the background. The iPad’s memory is limited, so in order to avoid performance issues you can close background applications by following the steps below.
. To close background applications press the Home button twice and when the recently used apps bar appears, tap and hold down the app you wish to close.
You will notice that after a second or two of holding down the icon, all the icons in the recently used apps bar will begin to move from side to side. You will also notice that a small red circle with a minus sign will appear on the top-left corner of the icon. Tap the red circle to close the background applications. Once you’ve closed several applications tap on the Home button again and you will return to the Home Screen or App you were using. Your iPad should feel a little snappier.

Similar Messages

  • How do you get the app store back on your iPad

    How do you get the app store back on your iPad

    My money is on one of the two suggestions that my colleague has given you, but if all else fails......
    You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
    Settings>General>Reset>Reset Home Screen Layout.

  • How do you download the latest flash player to your iPad

    How do you download the latest flash player to your iPad

    Adobe has not made a version of Flash for the iPad.
    Kappy explains why. https://discussions.apple.com/message/19446567#19446567
    Skyfire and Puffin are alt. browsers
    5 Flash Player Alternatives
    http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
    Top 4 browsers supports flash player on iPad and iPhone
    http://mashtips.com/flash-player-ios/

  • How do you do stop motion in iMovie 10.0.2?

    All the videos I have found show in an older version of iMovie.  The main problem is figuring out how to shorten the length of the photo time.

    You can select multiple photos and set the duration for all of them in one go see:
    https://discussions.apple.com/message/25576391#25576391
    This post might also be of interest:
    https://discussions.apple.com/message/15074194#15074194
    Geoff.

  • How do you export keynote slides to iMovie on the iPad?

    I want to make a keynot on the iPad into a movie on the iPad. How do I export it to iMovie?

    Are you using the youtube app?
    If so, another reason for stopping and starting can be your internet speed.

  • How can you tell if someone is spying on your iPad?

    Trying to determine if someone is spying on my iPad where they can see emails, apps, websites visited, get personal info.  THanks for the help.

    Tracking someone who's snooping on your iDevices is simple. Super simple. Simply clear everything you don't want seen. Web pages, browser history, texts, emails and phone call log. Then double click your home button. Turn off all of your background programs right before you lock or allow your device to auto lock and BOOM! The trap is set. If you suspect a nosy significant other of snooping this will catch them. When you get back to your device and double click your home button it will show you everything that they looked at. It's totally stealth and totally free.

  • How do you add/record audio in Keynote on your iPad with out using any other apps

    I need to do this for a project, but it on my school iPad and I don't have many available apps to use like voice memos, and I can't download any apps. But I can email myself a voice memo recorded on my iPhone

    You have posted in the wrong forum, this is Keynote Mac,
    you should ask your question here:   iOS forum

  • How do you get timeline view on imovie 08  and speed up a clip on imovie 08

    how do you get timeline view on imovie 08  and speed up a clip on imovie 08

    Hi
    You can not - Nobody else (if not a very selected few at Apple dev.group)
    TimeLine was lost in iMovie'08 and 09 and a very simple one re-introduced in iMovie'11
    Speed Change - Was omitted in iMovie'08 - and returned in iMovie'09 - BUT has to be used in a certain way - the glider/slide if used - will destroy the audio (a Known BUG - in both iM'09 and iM'11) but use of pre-set fixed no. 25% 50% 100% 200% etc. will work.
    Yours - still using iMovie HD6 - and LOVE it - Bengt W

  • How can you import AVCHD movies using iMovie '11?

    How can you import AVCHD movies using iMovie '11?

    H264 is one example of a codec used in MPEG-4 video encoding. Windows Media is a codec. Sorenson is a codec. DVPRO is ...etc....
    Play a source video file and do a get info on it and tell me what the audio and video details are.

  • How do you add the motion path of a tracking point to a separate clone stamp?

    How do you add the motion path of a tracking point to a clone stamp without the clone stamp assuming the same initial/continuous positions of the tracking point?
    Is there a way to keep the clone stamp's initial position and then add the path onto it?
    I am using the clone stamp to remove unwanted duct tape that was used to keep lights on a wall.

    I have spent two days trying to find a solution to this exact same problem. I have seen some overly complex solutions that probably work but trying to figure out the explanations is like trying to understand someone describe drag coefficients of rotary wing aircraft. While I am sure they work, they are way above my comprehension. I wanted an intuitive and straight forward solution for something that shouldn't require some arcane technique to fix.
    What I did:
    1) I used the Clone Stamp tool to paint over the spot on the wall I wanted to remove.
    2) picked a more easily discernible point of reference for Tracking. In my case, I used a poster on the wall.
    3) As per the instructions here, https://www.video2brain.com/en/lessons/removing-an-object-with-clone-stamp, I pasted the Attach Point data from the Tracker into Clone -> Transform - > Position 
    However, that didn't work for me as the object I was painting was not the object I was tracking. The solution from the video was simply moving my cloned spot to the tracked object instead of leaving it where I wanted it. So...
    4)  I then manually adjusted the Anchor Point of the Clone back to the original spot I wanted to cover.
    I played footage and the cloned region successfully moved with the spot I was covering.
    This is what I was able to figure out. I'm not an advanced user. I only use After Effects every couple of months when I need to fix minor things in footage, so I've only learned to use what techniques I need for the job at hand. No doubt, experienced users may shake their heads at my simplistic fix. I'm sure my technique would be wholly inadequate for situations far more complex than fixing spots on a gray wall, which is why my eyeballs cross when reading suggestions that seem way more involved than one would expect for something as seemingly minor as this. It's just a spot! It should be super easy to remove, right? Well, that's what I was looking for and that's what I came up with. I hope it helps.

  • How do you stop iOS 7 from auto enlarging your background picture?

    How do you stop iOS 7 from auto enlarging your background picture? And before it's mentioned, no, Turing off Reduce Motion has absolutely NO effect on the auto enlarge feature that apple stupidly thought would be a good idea. The Reduce Motion ONLY stops the background from subtly shifting as you turn or angle the iDevice.

    It should be my choice, not apples.
    And I agree. But neither of us is a programming engineer at Apple, and so don't get to make those decisions. The user tip I wrote was based on the fact I didn't like it either, and was trying to figure out why it was scaling an image up in the first place, and then how to fix it as best as possible.
    Since you've locked your iPad to one orientation, you should be able to copy your custom image off to your Mac (assuming you own one) and use an image editor, such as Photoshop Elements, to add pixel area to the narrow dimension to make it the same number of pixels as the larger dimension. Increase the canvas size so the extra space leaves the original narrower dimension centered, as in this example:
    Copy it back to your iPad and select the modified image. Since it's square, it shouldn't scale.

  • Can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?

    can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?

    Yes, there are even defaults for naming them, such as LivingRoom, Bedroom, etc, or you can even enter your own name with the remote for each AppleTV.

  • How do you pay for apps with credit on your account from an itunes gift card that has already been redreemed and the credit id on the account?

    how do you pay for apps with credit on your account from an itunes gift card that has already been redreemed and the credit id on the account?

    jen19 wrote:
    how do you pay for apps with credit on your account from an itunes gift card that has already been redreemed and the credit id on the account?
    Just buy something.

  • HT1338 how do you get ios 6.0.1 on your ipod

    how do you get ios 6.0.1 on your ipod

    Welcome to the Apple Support Communities
    http://support.apple.com/kb/HT4623

  • How do you transfer files (Music/books/pictures) from an iPAD or iPOD device to an new PC that has iTunes, but no data of files

    I have purchased an new PC since my oriiginal PC crashed after 5 years of use.  I want to transfer my iTunes files from my iPAD and iPOD to my new PC.
    How do you transfer files (Music/books/pictures) from an iPAD or iPOD device to an new PC that has iTunes, but no data of files

    The text below is copied from this discussion.
    https://discussions.apple.com/message/11527071#11527071
    Authorize your new computer's iTunes first - Store>Authorize this computer.
    1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    2) Now connect your iPad to your laptop and start iTunes.
    3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
    4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
    5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
    6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
    If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
    This discussion has much of the same information and even some more helpful tips.
    https://discussions.apple.com/thread/3305461

Maybe you are looking for

  • Printing problem - HP Officejet Pro 8500 Wireless All-in-One Printer - printer head?

    I posted this elsewhere, but I think I posted it on the wrong Forum so I am posting it here now. I hope I did not do anything to upset anyone. I am new to this area, please forgive my clumsiness. I have a HP Officejet Pro 8500 Wireless All-in-One Pri

  • Problems deploying ear file created with ant build script

    Hi All, I'm using Jdeveloper 11G and Weblogic 10.3. When I build my application and run it within Jdeveloper, it works fine. However, we have a requirement to run ANT build script and create a deployable .ear file that can be manually deployed to any

  • Letters change when creating PDF

    I am using Acrobat Professional 6 and creating PDFs with the "Adobe PDF" icon it created when installed. Some documents from the Bloomberg system are converted by a sort of substitution cypher to gibberish. Capital letters are affected, but not lower

  • My computer is authorized yet one song wont play and says it needs authorization what do i do

    i just bought a song and when I try to play it it says my computer needs to be authorized. When I hit authorize, it says my computer is already authorized yet thie song still wont play because it still says computer needs to be authorized. Whats wron

  • Dump after process starting

    Hello I tried to start the process of requisition approving. This process is not standard but it is based on the standard E-Recruiting process HR_MSSRCF_REQUISITION. After pushing the link "Create requisition request" I got a dump in program /1BCDWB/