How do you extract the audio from MP4 video files in iMovie 8?

Trying to pull the audio out of an MP4 file.  Any and all help is appreciated.  Thanks in advance.

Share your project using SHARE/EXPORT USING QUICKTIME.
Choose SOUND TO AIFF.

Similar Messages

  • How do I take the audio from a video and divide it into separate songs

    How do I take the audio from a video file and divide it into separate audio songs? I then want to export those songs into itunes.

    http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Can you extract the audio from a music video?

    Some of my favorite songs were purchased from Itunes as music videos. (Because they are also my favorite videos.) Now I'm trying to figure out how to move those songs to the iPod +without having to buy the songs as just songs!+ It's been very frustrating. "Create iPod or iPhone version" doesn't convert to anything useful for a Shuffle. How do I extract the audio from the video?
    Or do I have to buy the same music over again?

    Hello RoyFeni,
    And welcome to Apple Discussions!
    Can you change the music video's *Media Type* to Music from under the Options tab of the *Get Info* window for the track in iTunes?
    I'm not sure if you can, but hey its at least worth a try. It's all I have though.
    Otherwise, this is not possible via iTunes. The only way you would be able to extract the audio is through the help of some third party application. Not sure how simple or complicated the process is.
    B-rock

  • How do you overlay the audio from a clip over a iphoto slideshow clip ?

    How do you overlay the audio from a clip over a iphoto slideshow clip ?
    I want the audio from a video clip to be playing over the jpg/slideshow iphoto images ...so you see the slideshow elements but do not see the clip but do here the audio !
    thanks ! HELP!

    How do you overlay the audio from a clip over a iphoto slideshow clip ?
    "Command-Shift-Drag" the Event clip containing the audio you wish to extract and "pin" it to the slideshow already in the Project window.

  • How do you convert the audio from a mpeg4 video file to mp3?

    How do you convert the audio from a mpeg4 video file to mp3 format?

    Probably the easiest way to do this is to download a free media convertor. Most will be able to convert video into audio files.

  • Can you record the audio from a Video embedded in a pdf?

    I can't seem to find anything on this, so I will ask. A client sent us a company produced interactive pdf and wants us to use the audio from a video clip that is in the pdf. We asked for the audio clip but they don't know who to get it from and just keep saying it is in the pdf. While others try to explain that a pdf and an mp3 are not the same thing. I get to look into a fall back position of trying to extract the audio (or video). There is no copyright issue here. Client peon just can't/won't get the proper file.
    Maybe some one can help or point me to info that says it is not possible.
    Thanks.

    WireTap Studio did the trick. I downloaded a free Trial version and bob's yer uncle.
    Thanks Michael

  • Can I  rip the audio from a video file?

    I have a video file with a band singing on it. I have an ipod nano, so I can't import the video with the singing onto my ipod. Is there anyway to rip the audio from the video file and put that onto my ipod?
    -Thanks

    Open the video in Quicktime Player.
    Select the Export menu item.
    Change the Export type to "Sound to Wave".
    Save the WAV file somewhere with the default settings.
    Load the WAV file into iTunes and use iTunes to convert it to AAC for the Nano.

  • How do you fix the audio from drifting sync on DV footage?

    I know there has been some discussion about this, but the solution doesn't really make sense.  Basically, I am having a huge problem with audio sync on anything shot on MiniDV.   Sometimes the footage will pop at the beginning and the footage will immediately be off sync --- sometimes it takes halfway through the tape to start drifting.  We work with pro-level camcorders and recording decks, and basically the only solution I can find it use legacy FCP or iMovie to capture the footage.  Which is not a solution.  I've also tried the re-time fix, which *sometimes* works ------ but only sometimes.   Is this being addressed in any way? 

    Did you load the Presenter presentation in a Share pod or are you using screen sharing?

  • How do I delete the audio from a video in Premiere Elements 10?

    I took a video on the beach and all you hear is loud, irritating wind roar. I would like to delete the original sound and then add in musical tract on the project. Thank you for any help. I have searched the settings and right-clicked to no avail.

    Rajrae
    Sounds like progress. So pleased with your spirit of exploration and experimentation in dealing with the Premiere Elements learning curve. Congratulations.
    But, the whys for an issue keep me asking. You should be able to right click that Premiere Elements Timeline video and see the pop up with the option to delete the audio. What computer operating system is your Premiere Elements 10 running on...Windows or Mac?
    When I right click the video on my Premiere Elements 10 Windows 7 64 bit Timeline, I see the following:
    You seem to be finding Show Properties in that pop up. What else is missing from it besides Delete Audio?
    By any chance are you working in the Sceneline of the program instead of the Timeline. That might explain all this. In both the Timeline and Sceneline, you can get Show Properties, but it is only in the Timeline that you see the Delete Audio choice in the pop up.
    Please check it out. This will be a great addition to your learning curve if this proves to be the missing point.
    Thanks for the follow ups.
    ATR

  • How can I extract the media from a Pages file?

    Hi, I'm importing photos and videos into my Pages document. When I take that document to my macbook and open it I can see the media in it fine, sice the file contains it all. Now, is there a way to "open" that file and take the video files back out to my new desktop? I right click the Pages file but I get no "Show package content" option ti dig into it.
    Thanks for the help,
    rheex

    Nevermind, I found it.
    +Inspector > Metrics > File Info: > drag the file's icon to the desktop+
    cheers

  • How can I get the audio from my video to playback in Keynote?

    I pulled a flv from YouTube. Converted it to an mp4 and imported it to my iTunes library. Using the media browser, I imported the video into my Keynote presentation. The video plays back fine. However, there is no audio-despite the volume on my mac and the volume on the movie in the inspector is all the way up. The video plays back with audio in iTunes, but not in Keynote.
    My presentation is due Tuesday night. This video is the only thing keeping it incomplete. What gives?

    If it's music purchased from iTunes then you should be able to copy it over to your computer's iTunes via File > Devices > Transfer Purchases. If it's music that you purchased from elsewhere and/or copied from CDs and you don't have it elsewhere then there are some programs listed half-way down this page that should be able to copy them back : https://discussions.apple.com/docs/DOC-3991

  • How do you restore the system from a backup file that you created previously

    I have a notebook, Pavilion g6 - 1031TX running windows 7 64bit OS, and ran the backup utility a few weeks ago before running a full system recovery to attemp to fix an issue - this issue was fixed by warranty, and now I need to recover everything from the backup files, I have run the restore executable in the folder and it created another folder on my C: drive (System recovery files), how do I use this to restore the system to its previous state?

    Unfortunately, the backup utilty portion of Recovery is not optimal solution for restoring many files.Unless you know exactly where they go you are stuck. Most of the important stuff such as photos,music,etc will be in the 'Users' folder under your user name. You will have to manually move them to correct location.
    A better option in the future is Windows 7's backup app in Control Panel.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How can I extract the metadata from multiple image files into a .csv?

    Hi.
    I'm looking for what I believe is a simple task but I am not sure how to go about it. I want to get the relevant data (seen in the screen grab below) into a spread sheet. I need to get the File Name, Size, Dimensions, Resolution and Kind into the spreadsheet so I can better analyze the data for my purposes. I have tried to find EXIF and IPTC extractors but only come across products that show me the info with no way of transferring it. I figured there must be a way to do this in the Finder. Maybe it's a simple Automator task (which I am not very good at) or a Script.
    Can anyone guide me thru or suggest a tool that would work?
    I was given a suggestion in another Disscussion to use a Plug-In for iPhoto. I found an old one but it dosnt have all of the metadata I need. It's missing the File Name and Resolution as options.
    http://www.tc.umn.edu/~erick205/Projects/Metadata%20Export/
    Thanks,
    Stephen

    Nevermind, I found it.
    +Inspector > Metrics > File Info: > drag the file's icon to the desktop+
    cheers

  • Downloading audio from a video file from iTunes?

    I have a 40G 4th Gen click wheel iPod (no color or video). Is there a way to download just the audio from a video file that I have in iTunes?

    I use Steve's method all of the time, and edit the Audio output in Adobe Audition. You will want to Export/Share to PCM/WAV @ 48KHz 16-bit, and keep that format both going and coming back into PrE. Remember that you will be working with an Audio file, that is the full (or almost) Duration of the Timeline. When you Import that edited Audio file, give the program a few moments to Conform that newly Imported PCM/WAV for editing. I suggest not touching the computer, until Conforming has completed 100%, and the little progress bar in the lower-right of the GUI has disappeared. If the Imported Audio file is short, and your computer is fast, you might not even see that progress bar, but the Conforming has taken place, just the same.
    I like to keep the original Audio on its Audio Track(s), and just use Window>Audio Mixer to Mute that/those Track(s), leaving only my edited Audio on its own Track un-Muted. This is a "fail-safe," just in case I change my mind along the way, and wish to revert to the original Audio for some reason. It is much easier to Mute-Unmute, than to gather up all of that original Audio again.
    Good luck, and happy editing,
    Hunt

  • How can i cut the audio from 1 file and put it on another?

    I have these2 files of the same movie, 1 is amazing quality but theres no audio. the other is crummy quality but has perfect audio. How can I cut the audio from the good audio version and paste it onto the good video file?
    btw i have quicktime pro is that changes anything

    Open the movie and press "Command J". This will bring up the properties window. Click on the Audio Track or Video Track and the "Extract/Delete" buttons will light up. Click "Delete" and it'll delete the currently selected track, click "Extract" and it will extract the selected track into a new movie. Just use Delete on the correct track and you're halfway there.
    Then, select the movie that is just an Audio Track now, do "Command A" then "Command C" to copy the audio track. Go to the movie that's just a video track, move the insertion point to the beginning of the video then do "Option Command V" to add the Audio Track to the Video Track side by side.

Maybe you are looking for

  • Scanning .txt file and outputting results?

    Greetings Everyone. My employer has charged me with a rather confusing task. Basically I need to scan a .txt file and retrieve some information from it. Here is a little background on the file itself. This is a feed file containing the information fo

  • Microsoft ODBC data manager not found

    I created a Universe using Information Design Tool and published it to the repository. My data source was MS SQL server 2008. At this point I am able to view the result values in query in IDT. Now when I try to preview the query in SAP Dashboard Desi

  • MOBI with BOE and mobile server on different servers

    Hi Experts, We need to set up a BO MOBI with BOE and Mobile server on two separate servers. In such a configuration, how does the two servers communicate? What should be the VAS and VMS server configurations? especially the external hostnames in the

  • Question about Lego Mindstorms Capabiliti​es

    Hello, thank you for reading my question! I am currently working on the creation of a teleoperated robotics lab. for a introductory robotics course. I wish to allow students to control a labyrinth-solver robot via Labview, with the Lego NXT toolbox.

  • Safari: gmail attachments

    I notice that the new Safari has started not processing attachments to gmail email as well as it used to. I can attach one picture/file but not more than one and it then just continues with a message saying 'working' whilst it prepares to send the fi