How do you get Silverlight to work on a Mac?

I am trying to get Silverlight to work on my Mac.  I have followed the comments from other Mac users having problems with Silverlight and followed their directions for uninstalling and reinstalling, but still no luck.  Any ideas to get Silverlight for Mac to work?
thanks

I wish to add to my comment above.  I am trying to use Tagxedo on my mac and it says I need the Silverlight for Mac.  Any help greatly appreciated.  Thanks

Similar Messages

  • How do you get FaceTime to work between two Mac's with the same email address? Thanks, Mike

    How do you get FaceTime to work between two Mac's with the same email address?

    I would like to know the same thing.  How does facetime work between a MacBook Pro and an I Pad that run off the same email address/mac id

  • How do you get Groups to work on the IPAD? They imported and show in Address Book but when used, only the first address picks up.

    How do you get Groups to work on the IPAD. They show in address book but only the first name is used when entering.

    When you select the bookmark on the upper left, you should be able to see multiple groups.
    For the groups page, select the bookmark on the upper right to see the individual entries.

  • After downloading Flash 9, how do you get it to work with Apple iMac OS X 10.3.9 ?...

    a.
    After downloading Flash 9, how do you get it to work with Apple iMac OS X 10.3.9 ?...
    b. , c.
    What's the best browser to try?... Firefox?... Opera?...
    Why?...
    d.
    What directory/ies contain the downloaded Flash 9 files?...

    a. Your browser and the flash player should work together. You should not have to do any thing
    b. Camino is the best for 10.3.9 Why? You can access apples me.com through Camino on 10.3.9 but Safari will not work with me.com. Also all the internet plug ins work with camino
    c. hard disk - library - internet plug ins

  • After downloading Flash 9, how do you get it to work with OS X 10.3.9 ?...

    a.
    After downloading Flash 9, how do you get it to work with OS X 10.3.9 ?...
    b. , c.
    What's the best browser to try?... Firefox?... Opera?...
    Why?...
    d.
    What directory/ies contain the downloaded Flash 9 files?...

    a. Your browser and the flash player should work together. You should not have to do any thing
    b. Camino is the best for 10.3.9 Why? You can access apples me.com through Camino on 10.3.9 but Safari will not work with me.com. Also all the internet plug ins work with camino
    c. hard disk - library - internet plug ins

  • How do you get flash to work on a kindle?

    How do you get flash to work on a kindle?

    Basically, you don't Retailers really shpould tell people this BEFORE selling them a tablet that WON'T do what they're buying it for. See:
    "Why can't I install Flash Player on my Tablet?" (Kindle or Samsung Galaxy)

  • HT204266 When in setting's on display list is option for radio how do you get it to work or is this not possible. When i press centre button it puts a tick beside it

    When in settings on display list is option for radio how do you get it to work or is it possible. When centre button is pressed a tick appears beside it.

    The Palm Desktop is available to download from the Palm site:
    http://www.palm.com/us/support/macintosh/mac_desktop.html
    though this doesn't list the Clie devices and you may need to check which version you should be using. The Desktop will run on 10.4.
    The 'Apple' key is the Command key.
    You may need USB Overdrive - a useful program - unless the mouse comes with a Mac driver (some Miscrosoft mice do). Apple's Might Mouse will work fine.
    USB overdrive usefully allows you to assign the same mouse click to do different things in different programs.

  • HT3423 My iMac came with logic Express 8 installed, how do I get it to work on my mac book pro

    My iMac came with Logic Express 8 Pre installed. How do I get it to work on my Mac Book Pro

    Along with your OS and applications installation DVDs, you should have gotten an LE8 installation DVD along with its manual and serial numbers when you bought your iMac. 
    Your license allows you to install LE8 on two computers as long as they are your computers, you are the sole user, and you do not run Logic on both simultaneously. So dig out your installation DVD, install it on your MacBook Pro and enter your serial number and you will be good to go.

  • How do I get iCloud to work with my mac that has snow lepard and is pre intel?

    How do I get iCloud to work with my mac that has snow lepard and is pre intel?

    Richard Kerns wrote:
    And it kills me that a friend who has pc computers and just has an iphone and ipad can breeze through all this with no problem and he still has XP.  So Apple goes back and helps old OS for pc but not for it's own kind!!!
    Richard, I agree with you 1,000%. I wrote this in a forum a few weeks ago, when a user was complaining about Snow Leopard not supporting iCloud:
    Why is it that if I bought a Mac before July of this year, I must pay to upgrade my operating system in order to take advantage of iCloud? Meanwhile, a Windows Vista SP2 user, who bought a new computer in May 2009, already has everything they need on their computer to use iCloud.
    Why was it possible for Apple to write a free iCloud Control Panel that was compatible with existing versions of Windows, but Mac users must buy an entirely new operating system?
    If Apple gave Mac users the same amount of backwards compatibility that it gives to Windows users, people with OSX 10.5 (Leopard) would be able to use iCloud. That's something to think about the next time you go to purchase a new computer.
    (P.S. Something else to think about: If you bought a Mac before October 2007 (when OSX 10.5 was introduced), your computer won't run iTunes 10.5 unless you buy an upgrade. But a PC user, who purchased their computer as long ago as Sept. 2004(!), can run iTunes without an OS upgrade.)
    I got so angry thinking about this, that I ended up writing an angry note to Apple on their feedback page. After repeating what I just wrote here, I asked them to commit to providing at least the same level of support to Mac users that they do for PC users when it comes to their cross platform products (iPhone, iPad, iCloud, Apple TV, Safari, iTunes, etc.) And, really, is that so much to ask?
    I wish I knew how to start a petition requesting that Mac users get comparable treatment as PC users. But then again, shouldn't that go without saying?
    Please leave feedback about this revolting double standard on the Apple feedback page. They should be thinking long and hard about why their own customers are treated worse than the customers of their competition.

  • How do you get the Windows side on a Mac?

    How do you get the Windows side on a Mac?

    There is no Windows side on a Mac unless you install a version of Windows in a virtual machine or use Boot Camp to partition the drive and install Win 7 (if you are using a Macbook Pro that came with OS X Lion installed).
    If you use a virtual machine you can install just about any version of Windows that you have a retail disc of and a legal license key to go with it.

  • Received new mac how do you get all your information from old mac?

    Received a new mac for my daughter.  How do you get all the information from old mac?

    Your best bet, by far, is to use Setup Assistant when your shiny new Mac first starts up (not Migration Assistant later).
    See How do I set up a new Mac from my old Mac or its backups?

  • What is Firewire?  What does it do? How do you get it to work on the MacPro-something I must purchase perhaps?

    What is Firewire? What does it do? How do I get it to work on my MacPro?  Do I purchase it?

    Firewire is a serial connector technology that Apple incorporated in its 1999 and later machines that can be adapted to Thunderbolt, Express/34, and PCMCIA.   It can't be adapted to USB.   Many hard drives have Parallel ATA to Firewire and Serial ATA to Firewire adapters.   Firewire in its 4 pin configuration was popular on Sony devices such as Camcorders in the iLink connector format.   Apple started with the 6 pin variety that has its own power.  In 2003 it started including Firewire 800 in the 9 pin format and shifted to all Firewire 800 until Thunderbolt became standard.  A few MacBook, iMac, iBook, and Powerbook models didn't have it at all.
    Mac Pro is a desktop computer from Apple.  MacBook Pro is a notebook computer.  Not knowing your computer's age, doesn't help us determine how to adapt it.  Go to your System Profiler and look for Mac Pro x,y or MacBook Pro x,y and tell us which you see, and what x,y values you see.

  • How do you get DHCP to work through a controller?

    I thought I asked this question in the past...
    If you add a controller to an external network in a soho environment, how do you get the controller to pass DHCP requests through it.  In order to get it to work, I have to set up a DHCP scope in the controller, which is not what I want to do.  I want to use the existing DHCP service.  The controller doesn't seem to want to send the requests through.           

    "Also of you use ISE with the dhcp probe for finger printing, you need to disable it .."
    I'm dealing with this exact issue now. You can't simply put ISE in as a secondary DHCP server for the WLAN because it doesn't unicast to BOTH primary and secondary server addresses.
    So you're left disabling dhcp proxy and using helper addresses on VLAN SVI's, which is fine if you want *ALL* of your WLANs to use an external DHCP server. In this case we'd like the Guest users to get DHCP addresses from the WLC (they get tunneled to a mobility anchor in a DMZ where there is no DHCP server) and the regular users to use the SVI helper addresses so that the DHCP packets can also be sent to ISE for proper profiling.
    I guess we're kind of stuck with it and may have to get the customer to stand up a DHCP server in their DMZ, I see no other way around it at this point.

  • How do you get passbook to work

    How do u get passbook to work.

    You need to download passbook compatible apps such as Target, American Airlines, Fandango, Ticket Master (less than 20 compatible apps exist right now).
    If you try to connect to the app store from the passbook app and get an error, use this article to fix it: http://www.macworld.com/article/2010185/fix-passbooks-app-store-error-in-ios-6.h tml
    You can also create your own cards for passbook here: http://www.passsource.com/ such as blockbuster card, petco card, petsmart card, etc.

  • How do you get Hyperlinks to work in MAIL signature?

    Hi,
    I need help.....How does one get Hyperlinks to work in MAIL signature?..when I do this is turns blue and IS underlined (as usual) but the link doe not work ..any thoughts???..
    also any one have ideas on how to select and group email from the same source in MAIL (like EUDORA does)...???
    thanks in advance
    IMac G5   Mac OS X (10.4.8)  

    sonic,
    There is a known bug in Mail 2.1 associated not only with the inclusion of hyperlinks in sigs., but also the association of sigs with accounts.

Maybe you are looking for

  • My MAC Book Pro is hanging after installing Lion OS

    Hi i have recently installed OS X Lion from the apple store and after the installation is commpleted my MAC started to hang and give a black screen with no responce what so ever. the only thing i can do is keep pressing the power button until it gose

  • Indesign CS4 adds square boxes around images when exporting to PDF

    When I export a brochure created in InDesign to PDF, for some reason the .pdf file (only the PDF - the InDesign version doesn't show these) shows faint squares around images/graphics that have shadow effects applied. These appear around photos, as we

  • Performance manager sql action rule for updating metric table

    Hi, I need to update metric stop_date using a sql action rule (Performance Manager execute sql action rule). My problem is I can't update stop_date into the PM Repository Database. Sql action database connection is properly set, but when I set sql fo

  • Creating a GDG File in the Mainframe FTP

    Hi, I am working on Proxy to File Scinario, Where i need to create a File in the Mainframe FTP in the GDG File Format. The file name schema provided is <b>T903.PX5013.SIRCON.CREDS(+1)</b> I am able to genarate the file successfully in the another FTP

  • CP5 Save as template

    Hi all, Save As > CPTL. Has this feature been removed from CP5? - In CP4 I was able to save my current project as a template straight from the File menu. Maybe it is still there and I just cannot find it..? Thanks