How do you increase or decrease decimal places

Does anyone know how to increase or decrease the number of decimal places in Numbers?

select the cell(s) then use the cell formatter to adjust the displayed number of digits. To open the formatter click the "Format" button in the top right corner.
Here is a number where the formatting is automatic:
Here is requested 2 significant digits:

Similar Messages

How to increase no. of decimal places in a cube

Dear Friends
Can you tell me
how to increase no. of decimal places in a cube
i want 5.98765 this value in the keyfigure
but it is allowing me only 5.987 only 3 digits after decimal
urgent
Thx

Hi Laxmi,
Inorder to store data with more than 3 decimal places,you can check the keyfigure with maximum precision checkbox available in the additional properties tab of the keyfigure.By which you can store upto 9 decimal places.
Or
You can change the data type from DEC to FLTP,by which you can store data upto 15 decimal places in the cube.
Also by changing decimal places in Bex allows you to change the decimal places for the data to be displayed and if the data in the cube is holding 3 decimal places how can you display 5 decimal places in report.
Hope it helps....
Regards,
Umesh.

In mail, how do you increase font sizes in a reply. Cannot find things like "underline", "italic" etc either. Where are they? Entourage was easier!!

In mail, how do you increase font sizes in a reply. Cannot find things like "underline", "italic" etc either. Where are they? Entourage was easier!!

Preferences/Compsing/set to Rich Text (only then you can use bold etc).
Then Rightclick the toolbar in Mail, and clcik Customize the toolbar.
Put the icons (with or without text) that you want on your toolbar.

How to get the number of decimal places configured for a site column

Hi,
I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
The column conatins a value, but when retrieved programatically is displayed as 5.00000000 instead of 5.00.
I am retrieving this column using listitem.Properties[field.InternalName].
I need to trim the decimals based on number of decimal places configured for the site column.
How to get the number of decimal places configured for a site column?
Thanks in advance,
dhijit

Get the field as SPFieldNumber and then check DisplayFormat which returns
SPNumberFormatTypes
SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

How do you increase the volumne size of a hard drive partition?

how do you increase the volumne size of a hard drive partition? the drive is set up into 3 partitions C, HP_tools and, recovery, C has space and would like to move some to HP_tools that is full. when I run backup I get drive full. I have run backup now to an external drive so that is not an issue.

Hi,
Firstly please don't keep anything in HP_TOOLS except things have been there. You can use Windows systems tool called Disk Management. Please use the following tutorial:
http://www.howtogeek.com/howto/windows-vista/resize-a-partition-for-free-in-windows-vista/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do you increase the font size to bigger than 24, using the typewriter tool in Adobe Acrobat Pro 9 for Mac?

How do you increase the font size to bigger than 24, using the typewriter tool in Adobe Acrobat Pro 9 for Mac? Often I just want to label an item on a map that is in PDF and want to use a simple label rather than a Text Box for labeling, but have yet to find a way to increase the font size beyond 24. Can someone help me with this? - JML

Read this:
https://forums.adobe.com/thread/1468782?sr=stream&ru=2382437

How do you increase the number of messages retained in your inbox?

How do you increase the number of messages retained in the inbox?

settings - mail - email account - mail days to sync - choose the desired option.

Apple Mail (Mavericks), Viewing size of list is too small.how do you increase the size of the email message list. The font is too small, I can hardly read them.

In Apple Mail, using Mavericks, how do you increase the size of the email message list that displays on the left side of the screen?
The font size is so small.
Thanks.

Thank you for responding. After investigating and checking further, it was clear that only one of your suggestions changes the font size of the list of emails, also called the In-box. And that is the display resolution.
However, changing the display resolution affects the dots per inch of everything, everywhere and makes it larger.
Given the high end fee Apple charges for their products, and the generally well developed software they provide, it is hard to imagine they have not corrected this obvious slight of effort on the inbox text. At times Apple's "one-size-fits-all" and "it's our way or no way" mentality astounds me and makes me want to run back to Microsoft.
Evidently this is a well known mistake, which has yet to receive any attention.
Again, thank you for your effort and assistance on my behalf.

How do you increase the font size on Photoshop menu?

I can barely read the Photoshop menu - it is like microfiche - how do you increase the size of the fonts in the menu?

click edit>preferences>interface>ui font size.
restart ps to see the changes.

How do you increase font size in Bridge using windows 7 and a 4k monitor? It appears as though this issue has come up previously but there is no answer.

How do you increase font size in Bridge using windows 7 and a 4k monitor? It appears as though this issue has come up previously but there is no answer.

Unfortunately this will require some new programming by Adobe and there's no way to know when that will happen. In the meantime, the only option I think you have available to you is to change your resolution so that your monitor is using fewer pixels per inch.
Kinda blows the whole value of the newer monitor but I suppose you can switch back and forth from low res when you are working in Bridge to high res when you are working in PS.
Sorry, but for the time being, that's about it.
Best,
Gary

How do i increase or decrease vaule of asset that was capitalized in prior

How do I increase or decrease the value of an asset that was capitalized in prior year (2011)? The prior year and current year depreciation also needs to be adjusted to reflect the change in asset value.
1)Assets were created in FY11 with an 11/15/2010 date
2)The assets were given incorrect costs.
3)I need to adjust the cost of several assets .The net amount of all cost adjustments will be 0$.
4)Some of the assets will be adjusted down to 0$. These need to be disposed of.
5)I tested few few assets in testing client using ABZON.
ABZON will not allow me to input the original acquisition date because it is in prior fiscal year. To test, I used a period 1 date (4/15/11). Using 4/15/11 will not adjust the prior year depreciation.
ABZON also does not deactivate the asset so after I processed the asset decrease using ABZON, I used ABAVN to dispose of the asset. This created an entry to the gain/loss account for the depreciation that was taken in FY11 (prior year).
For example: one asset with acquisition value: 2272.05 and depreciation posted in prior year (2011)is 53.97
Acquisition value 2272.05 has to be zero with other asset adjustment.
How can prior year depreciation (53.97) can be adjusted in the current fiscal year
Need your help on this.
Regards,
Lucky

HI,
My transaction type is not 7* series but it is 336.Please help me to get this done.
I mean it is settled from project and WBS element to Assets(144 assets) using CJ88,so i tried reversing it in CJ88 but it thrown me error message as Fiscal year is closed, I opened fiscal year for asset accouting for previous year.
i already did ABZON with value date 4/15/2011 for one asset among 144 assets and did asset retireemnt,so when try to reverse in CJ88 (value date :11/15/2010)its throwing me below message
retirement was already posted on the asset 00000xxxxxx 0000 on 20110415. Based on the value date 20101115 of the transaction, this transaction should have been included in the calculation of values for the retirement.
Reagrds,
Pandu
Edited by: luckypandu on Mar 9, 2012 3:46 AM

How do you get LabView7.0 to place a text display on top of a graph instead of it becoming buried and invisible?

How do you get LabView7.0 to place a text display on top of a graph instead of it becoming buried and invisible?

On your toolbar, you will see a little icon on the far right. The tip strip says Reorder. Select the graph, then the Reorder button and select Move to Back.

How do you increase flash storage

I have the latest 2013 version of the MacBook Air. I bought the one with 128 gb and it has 15 gb left. How do you increase flash storage on the MacBook Air?

You cannot. Your options are to sell your current machine and trade it for a 256GB model, or to purchase and use an external drive, or to clear out lots of space on your existing drive.

How do you increase the vibration intensity on a Iphone 4.

Here's my question: How do you increase the vibration intensity on a Iphone 4. Yes, iphone 4 does have the normal vibration intensity, but I want to increase the vibration strength.

No can do

How to decrease decimal places in invoices

Good day,
How do i drecrease decimal places in invoices. For example , i have set the decimal places to 4 for costing purposes but i want the final invoice to be 2 decimal places for display purposes. i have tried decreasing the decimals using the decrease decimals icon but the decimals are still 4.
Thanks

Hi Wendy,
This is System Standard that If you increased Decimal Place then you can not decrease those decimal Place again.
If you want this then you can do this in (Print of Document) Document Layout through Crystal Report.
Hope this help
Regards::::
Atul Chakraborty

How do you increase or decrease decimal places

Similar Messages

Maybe you are looking for