How do you increase the Brush Size past 50 on the Stroke Effect?

Hey Everyone,
I created a photo in Photoshop and I imported it to AE, and I've been trying to create a Spray Paint effect by using the Stroke effect and Reveal Original Image to look look like as if I'm spray painting the the picture on the wall. All is going well until I get to the brush size, and it only goes up to 50. Does anyone know how to increase it past 50? 50 is to small, it won't cover what I want it to cover for the stoke. I can't seem to figure out a way to get it higher than 50, and I don't know any other way to create the effect I'm trying to go for. Anyone know how to either get past this or know a different way to get make it look like I'm spray painting the picture on the wall? Any help at all would be great.
Thanks in advance!
-Raven

The After Effects CC (12.2) update increases the maximum size of the brush for the Write-on effect and Stroke effect to 200 pixels (from the previous maximum of 50 pixels).

Similar Messages

  • How do you increase the volumne size of a hard drive partition?

    how do you increase the volumne size of a hard drive partition? the drive is set up into 3 partitions C, HP_tools and, recovery, C has space and would like to move some to HP_tools that is full. when I run backup I get drive full. I have run backup now to an external drive so that is not an issue.

    Hi,
    Firstly please don't keep anything in HP_TOOLS except things have been there. You can use Windows systems tool called Disk  Management. Please use the following tutorial:
      http://www.howtogeek.com/howto/windows-vista/resiz​e-a-partition-for-free-in-windows-vista/
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do you increase the font size to bigger than 24, using the typewriter tool in Adobe Acrobat Pro 9 for Mac?

    How do you increase the font size to bigger than 24, using the typewriter tool in Adobe Acrobat Pro 9 for Mac?   Often I just want to label an item on a map that is in PDF and want to use a simple label rather than a Text Box for labeling, but have yet to find a way to increase the font size beyond 24.   Can someone help me with this? - JML

    Read this:
    https://forums.adobe.com/thread/1468782?sr=stream&ru=2382437

  • Apple Mail (Mavericks), Viewing size of list is too small.how do you increase the size of the email message list.  The font is too small, I can hardly read them.

    In Apple Mail, using Mavericks, how do you increase the size of the email message list that displays on the left side of the screen?
    The font size is so small.
    Thanks.

    Thank you for responding.  After investigating and checking further, it was clear that only one of your suggestions changes the font size of the list of emails, also called the In-box.  And that is the display resolution.
    However, changing the display resolution affects the dots per inch of everything, everywhere and makes it larger.
    Given the high end fee Apple charges for their products, and the generally well developed software they provide, it is hard to imagine they have not corrected this obvious slight of effort on the inbox text. At times Apple's "one-size-fits-all" and "it's our way or no way" mentality astounds me and makes me want to run back to Microsoft.
    Evidently this is a well known mistake, which has yet to receive any attention.
    Again, thank you for your effort and assistance on my behalf.

  • How do you increase the font size on Photoshop menu?

    I can barely read the Photoshop menu - it is like microfiche - how do you increase the size of the fonts in the menu?

    click edit>preferences>interface>ui font size.
    restart ps to see the changes.

  • In mail, how do you increase font sizes in a reply.  Cannot find things like "underline", "italic" etc either.  Where are they?  Entourage was easier!!

    In mail, how do you increase font sizes in a reply.  Cannot find things like "underline", "italic" etc either.  Where are they?  Entourage was easier!!

    Preferences/Compsing/set to Rich Text (only then you can use bold etc).
    Then Rightclick the toolbar in Mail, and clcik Customize the toolbar.
    Put the icons (with or without text) that you want on your toolbar.

  • How do you increase font size in Bridge using windows 7 and a 4k monitor?  It appears as though this issue has come up previously but there is no answer.

    How do you increase font size in Bridge using windows 7 and a 4k monitor?  It appears as though this issue has come up previously but there is no answer.

    Unfortunately this will require some new programming by Adobe and there's no way to know when that will happen. In the meantime, the only option I think you have available to you is to change your resolution so that your monitor is using fewer pixels per inch.
    Kinda blows the whole value of the newer monitor but I suppose you can switch back and forth from low res when you are working in Bridge to high res when you are working in PS.
    Sorry, but for the time being, that's about it.
    Best,
    Gary

  • CS4 + CS5 Brush CURSOR outline disappear when increase the brush size

    Hi
    In Photoshop CS4 and CS5, the outline of the brush cursor starts to disappear when you increase the brush size.
    It's OK under 65px in diameter and it's start to disappear over 66px. In 438px the outline is a single dot and over 439px the cursor outline is completely gone!
    I read that it's caused by the old drivers for the video card. I'm using GeForce 8800GT and I updated the driver with the latest version form the nVidia web site. The problem is still here!
    HELP?

    I'm seeing a bit of a pattern of multiple people reporting problems with nVidia 8800 cards.  I'm thinking nVidia isn't testing new drivers against this particular model very intensively.  See my comments on video cards and drivers in this thread:
    http://forums.adobe.com/thread/682582
    -Noel

  • How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

    How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

    I now have the pallete on the right side of my screen. But, I am unable to change the color of the brush. I move the eye dropper over red and click on it. A panel comes saying 'Pure Red', I click ok but the brush color does not change.
    David Miller
    [email protected]

  • How do you increase the number of messages retained in your inbox?

    How do you increase the number of messages retained in the inbox?

    settings - mail - email account - mail days to sync - choose the desired option.

  • How do you increase the vibration intensity on a Iphone 4.

    Here's my question: How do you increase the vibration intensity on a Iphone 4.  Yes, iphone 4 does have the normal vibration intensity, but I want to increase the vibration strength.

    No can do

  • I have suddenly lost the brush size circle. How do I get it back?

    I have suddenly lost the brush size circle. How do I get it back?

    Is your caps lock on?
    If so, turn it off.

  • How do I change the brush size?

    I just started using CS6 almost 30 minutes ago, and the first problem I've found is that I don't know where to change the brush size. Can anyone help me?
    Thanks in advance.

    Hi,
    Select brush tool in the tools panel,on selecting the brush tool there are three extra options exposed at the end of the tools in the tools panel.  1: Brush Mode 2.Brush size 3.Brush shape.Click on brush size option to select the size.
    Thanks,
    Sangeeta

  • Adjustment Brush in Lightroom 5 has a different sized effect smaller than the brush size

    Hi,
    When using Lightroom 5 Adjustment brush, the effect is only in the inner half of the brush size circle. In other words, if you select a 1 inch brush to darken, only about the center 1/2 inch is being darkened. I'm 100 percent sure the brush has no feathering, and all the settings are fine. An expert told me to try to get rid of preferences, and try it, and it still does the same thing. Now, I just updated to LR 5.7 hoping maybe it will fix it, to no avail. The LR on my laptop behaves perfectly fine.
    Attached is a screen shot and a phone shot (excuse the moire, I had to use a phone to show the brush size properly) to show settings and the effect I'm talking about, so it's perfectly clear.
    I have been putting up with this for months, but it's driving me crazy. Also, it occurred to me that all adjustments I make might 'change' later when I fix it, and it might show up unknown to me when I export the files later. And this would waste hundreds of hours of work if something resets somehow.
    Does anyone have any suggestions on how to fix this?
    Thanks in advance for all replies!
    Stu

    This problem is caused by changing the cursor size in the ACCESSIBILITY settings in your OS.  Here is a screen shot from the Mac but Windows has similar settings.  I reported this in Lightroom 2 or 3 and it is STILL not fixed. (Adobe's bug fixing rate to me is pretty dismal)   If you change your system cursor to anything except "Normal" you will get this behavior as Lightroom doesn't account for the system preferences.  I would like to make my cursor bigger but this prevents it.

  • How do I increase system font size (for menus, etc.)?

    I wear contacts, but still don't have perfect vision, and working on my mac all day as a researcher means that my eyes can get tired- especially since I work on double screens- my macbook air + a widescreen display on my desk. There are a lot of accessibility options in Yosemite, but I cannot see an option to simply increase the menu/system font size. It seems ridiculous that one can easily increase fonts in safari or other programs with a pinch-out motion, but there are NO possibilities for making menus and system text--which users have to decipher across their day and tasks--more legible. (I could never find this option in Mavericks either, but am surprised not to see it added in Yosemite, with all the smart, beautiful aesthetic changes).
    So, how can I increase menu font size? 
    Many thanks in advance!
    Emily

    Make sure to register any complaints you have about the text size in Yosemite, with Apple Feedback
    https://www.apple.com/feedback/

Maybe you are looking for

  • Error in Using FP_JOB_OPEN

    Hi all, I am using FP_JOB_OPEN FM to open a PDF form in EP. But I am getting an error stating that "Define all the required parameters". Please help me on this. Regards, Amit

  • My Apple TV is having issues!

    When I try and use ATV I get stuck on setting date/time screen. No matter what I press or try to restart ATV it will not work. It says you should be able to press menu and set up to a wireless router, but it doesn't do anything when I try! After abou

  • How will I know the carrier of my iPhone 5?

    I bought my iPhone 5 in Thailand through online apple.com , but I want to know the carrier of it. thank you.

  • HP 23xi Monitor: Windows not filling screen at 1920x1080

    Just bought a HP 23xi for my Acer M1610 Win 7 pc connected by vga port. At the 'HD' resultion of 1920x1080 as is 'recommended' when altering the screen resolution, the screen contents are ofset to the right by about 3 inches. I can adjust the horizon

  • Servlets, initArgs and JSP

    Could someone from the WebLogic team please comment on this:           Is it really true that I cannot           a) Set some common arguments for all of my servlets at once, like:           servlets.default.initArgs = pooluser=someuser, poolpwd=somep