How do you install while still using safari

I am using safari and want to upgrade to OSXLION . what steps must I do first? The other ? is are there operating issues with lion?

Safari and Lion really don't have anything to do with one another. Lion is the computer's operating system. Safari is just a web browser.
Start here: http://www.apple.com/macosx/how-to-buy/

Similar Messages

How do you Install Win XP using Boot Camp without use of an optical drive?

So I'm about at my wits end. I'm try to get Windows XP on my OS 10.5.5 MacBook Pro. I've run into what seems to be a bit of a dead in. Unfortunately my optical drive has gone stupid on me and won't allow me to get through the entire set-up. The Mac has know trouble seeing the Installation Disc. After my partition has been created and I click start Windows Installer, the computer reboots in a normal fashion up to when you get the apple with spinning progress wheel. At this point the screen goes black and I get a "-" blinking in the top right corner of the screen. I figure it's just trying to boot from Win Install disk but it just kinda sits there. So here's my question. Is there some way to boot this Windows Installation from anything else but the CD? I luckily have an image of the WinXP CD in about 5 formats. I'm going absolutely crazy because I had just Installed WinXP not more than an hour before I ran into this initial problem but wanted to change the WinXP partition to FAT 32 as opposed to the NTSC format I accidently used. I would really appriciate any help in my dark hour.
System Info
MacBook Pro 4.1
Mac OS 10.5.5
Bootcamp 2.1
Windows XP with Service Pack 2
HL-DT-ST DVDRW GSA-S10N
System was just recently re-installed with fresh copy of a software and updates.

Kirkdan:
I really would like to help you and get your issue resolved in your dark hour as you said. I am afraid that I do not have good news for you. This is because the limitation put on by this entire process of installing Windows via boot camp.
The answer to you question to install windows from any other medium other than your built-in optical drive is a NO. This won't work since once Windows begins to install then it will not have all the drivers installed to recognize the external CD drive (USB/Firewire) and installation will halt.
Axel F.

I had somebody work on my OS 10.9.2 to speed it up. He failed and now Preview, Textedit, App Store, Mail and Contacts do not work anymore. I can still use Safari, Firefox and iPhoto etc. How do I get it fix I can still use Safari, Firefox and ed again?

I had somebody work on my OS 10.9.2 to speed it up. He failed and now Preview, Textedit, App Store, Mail (crashes) and Contacts do not work anymore. I can still use Safari, Firefox, Word, Photoshop and iPhoto etc. How do I get the Apple programs fixed again?

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

How to put display on screensaver while still using the beamer?

How can i put my display on screensaver while still using the beamer?
My beamer can be on for a long time, i would like to use my screensaver at the same time, but then the beamer screen also goes to screensaver.
Is there a way to use just the beamer screen, while the computer screen is on screensaver?
I use a macbook pro with Mavericks.
Thanks in advance - Daan

What you can do is hiding the tabs (see pic below) and force the active tab programmaticily
Hope this helps
Message Edité par TiTou le 09-20-2006 10:35 AM
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
Attachments:
Clipboard01.png ‏151 KB

How do I prevent browsing and search data from being forwarded to Google by Mozilla, while still using Mozilla's Firefox as my default browser?

I do enjoy using Mozilla's Firefox as my default browser, BUT, I don't enjoy the details of my life, to include my Internet activity, to be archived by Google, or anyone else, via Mozilla's/Firefox's sharing of my Internet browsing and/or search engine activity with any aspect or facet of the Google organization. With all of this said, my question is, "How do I prevent browsing and search data from being forwarded to Google by Mozilla, while still using Mozilla's Firefox as my default browser?"

Firefox's default behavior includes no automatic interaction with Google.
We do use Google as default search engine and to report web forgery in the 'help' menu, but no data are sent to Google without your knowledge, and you can change your preferred search engine at will.
However many websites themselves make use of Google Ads which do cause interaction with Google when you load the webpages. This is visible in status bar and happens in any browser. The [https://addons.mozilla.org/en-US/firefox/addon/noscript NoScript] add-on for Firefox can largely save you from this problem.
If you see things happening otherwise, please reply with details on what you see.

How do you install windows XP on macbook and use microsoft access

how do you install windows XP on macbook and use microsoft access?

there are two methods to intall windows on your macbook
1st is through Parellel software
2nd is through Boot camp.

How do you install mountain lion on all your macs in the household using one 20 dollar license?

how do you install mountain lion on all your macs in the houshold with the same license (you only pay 20 bucks for all your macs) is that right?

As long as they're all logged into the Mac App store with the same Apple ID, you can re-download the installer to all the Macs.
Or you can save a copy of the installer file before you run it and use that to update the other Macs. The ML installer file will appear in your Applications folder when it's done downloading. Copy it to another location (don't move it).
If you don't copy it before you upgrade, it will disappear when ML is finished installing.

How do you install a Digital ID Certificate for use on iPod Touch?

On my iPod Touch there is a button to turn on s/mime under settings, mail/calender, accounts, advanced but it says there are no certificates installed. So, if you had a certificate from a COA how would you install it on the iPod Touch? I have heard of configuration profile utility for the iPhone but isn't that for companies or buisnesses to use?
Thank you for any helpful information.

Hi,
One way is to email your cert to yourself; another is to use cloud-based storage (e.g., Dropbox) that allows you to reference files via URL. In either case, once the file is selected it will be recognized as a digital certificate and you will be asked if you want to install it.
Hope this helps.

How do you create a still image from a video using IMovies 11?

How do you create a still image from a video using IMovies 11 on a Pro Mac?

The simplest way is to do a simple screen capture.

How do I download PDF files using Safari. All I get is a black screen.

How do I download PDF files using Safari. All I get is a black screen.

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Does iWORK run on iPAD2? How do you install it?

Hi,
I still have an iWORK software good for 3 more users, can i install one in an iPAD2? How do you install it? Can you use iPAD to work on pages or numbers?
Thank you for your time.

On your iPad, tap the App Store icon, and search for Pages, Numbers, and Keynote. Download. Alternatively, on your computer, load iTunes, click Store on the left, then search for Pages, Numbers, and Keynote. Download, then sync to iPad.

How do you install 3rd party plug-in in Photoshop CC

Our fine customer service/tech support wouldn't help me with my question/problem because 3rd party plug-ins are not an Adobe product.... Silly, isn't it since all I want to know is how do you install "any" plug-ins into Adobe Photoshop CC. Can anyone with any sanity here offer a solution?
Thanks.

It could be complex depending on your OS and user ID permissions. Adobe Photoshop CC Mac version only supports new Mac with Intel 64bit processors, Photoshop CC windows supports both 64 bit systems and 32 bit systems. If you have a 64 bit system both the 32 bit and 64 bit version of Photoshop are installed so windows has both a 32 bit Plug-in Folder and a 64 Bit Plug-in Folder. Prior to CC Photoshop Preference let you add you own Plug-in folder tree to Photoshop Plug-in folder tree. I still install Plug-in that way however I have to add the link manually for adobe removed that option from its Preferences UI in Photoshop CC. I always have more the one versions of Photoshop and all installed versions use the same Plug-in, Actions and Scripts that I add to Photoshop. There is One exception. The Way the Image Processor Pro plug-in script is coded expects it and it default XML file to be installed into Adobe's folder so I made and exception for it. You user ID need to have permission to modify and add files to system folders if you want to install plug-ins into the folders that Adobe created for third party plug-ins to be installed into.
Adobe Photoshop CC installer creates a folder in Photoshop version ...\Plug-ins\... so on my Window 7 64 bit system there are two folders
"C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\" and
"C:\Program Files (x86)\Adobe\Adobe Photoshop CC\Plug-ins\"
All I add to these are the Adobe ScriptListener.8li Plug-in and a link to my Plug-ins folder.

How do you drop a still photo into a video?

how do you drop a still photo into a video -- while continuing the audio track unchanded?

by popular demand, Kelli Applies Lip Liner to Audrey's Lips has been completely re-mastered. (ok, it was just one person who asked, but she's a very intelligent and articulate observer of such matters. she noted that the clip suggests "interesting possibilities", but that men probably would be unaware of that. i explained that "men are pretty simple, so we don't see too many moves ahead." she laughed.)
i believe that in an earlier post i indicated that in the re-mastered version i would delete the in-camera audio and dub in the audio from the Zoom H4n audio recorder. this i did.
(syncing the video and audio continues to be a nightmare, though ).
besides signifcantly improving the sound quality, using a separately recorded audio source allowed me to drop (2) still photos into the video track, and still preserve the continuity of the recorded conversation.
dropping in the stills the correct way (unlike in the first re-mastered video) was easier than i thought it would be. it's just a matter of dragging the Premiere Elements 7's red vertical timeline-cursor to the point on the timeline where you want the insert to begin, and then dragging and dropping the still photo alongside the red cursor. the amount of time the still will appear can be shortened or lengthened by dragging with the mouse -- the same way any other file can be extended or contracted.
the video coming out from the still was now running behind the soundtrack. but, the timeline shows the exact duration of the still, so the video coming out was shortened with the mouse by that same duration, and then the audio and video were back in sync.
to add the "sound effect" of the camera's shutter clicking (actually its mirror slapping) before each still appears, i found a point on the audio recording that had the click of my camera actually taking a still, and that had only a little audio from the models underneath it. removing all the audio before and after the sound of the camera click was, again, just a matter of finding the start/stop points i wanted, moving the timeline's red cursor to those points, and using the mouse to drag the ends of the audio file alongside the cursor.
because i wanted the sound of the camera click to merge with the converation anyway, i just put the audio file of the click on its own audio track (which allowed me to separately control its volume).
however, when i tried to copy and paste the audio file of the camera click to the beginning of the second still photo, i was not able to copy and paste by the normal method of using the mouse to right-click-file/left-click-"copy"/left-click-"paste". eventually, i tried doing so by clicking on "edit" on the menu bar at the upper left and then clicking on "copy" and "paste", and there was no problem. (go figure.)
as with the other re-mastered video, i brightened, increased contrast, made the hue a bit warmer, and added a little sharpening. (this has to be done individually for each separate video file that makes up the whole piece -- at least that's what i did.)
interestingly, the audio level can be tweaked directly on the timeline by using the mouse to drag up or down a horizontal yellow line running the length of the audio file.
i again rendered in Adobe Flash Video (.flv). (annoyingly, in XP at least, there's a default download destination that has to be reset everytime you want to save in a different location). from a drop-down menu i selected "NTSC Flash Video 700k" (just in case) and left the file name as "Untitled" (since no matter what i change it to, it saves as "untitled.flv", so i have to rename it anyway once it's saved).
i went into "Advanced..." and, to preserve the dimensions and the HD, i unchecked "Resize Video", chose "Same as source" for the frame rate, and checked 2 "Encoding Passes" (just in case).
for some reason, everytime i click the "save" button, it asks what i want to call these settings. if i use the name i used for the same settings on the previous go-round, it says that that name is already used and (impliedly) can't be used again. so, i add the new date, and yet another name for the same settings gets added to the drop-down menu (odd).
once the compressed .flv file was saved, it was an easy upload to youtube.
btw, it seems that the Elements 7's Audio Mix defaults to 0 dB, OR whatever the setting was in the prior saved version, unless i use the mouse to continuously "ride the slider pot". that's ok for a 48-second video, but does anyone know of a way the dB can be set so that it just sits there, instead of moving back to where it previously was

How do you install a sound font (.sf2) onto Garageband 10?

I've been looking all over the place to figure this out, but I've found nothing. How do you install a .sf2 file onto garageband 10? I used to be able to install it using the DLS music device, but as far as I know, that's not in Garageband 10.

I am seeing the DSL music device in the Audio Units section of the Smart Controls. But maybe it is a left-over from GarageBand 11.
Open the Smart Controlds and click the Audio Units > Instrument brick.
Then select "Au Instruments > Apple".
But I did not check, if soundfonts still will work this way. Tell us, when you try.
Regards
Léonie
I nearly forgot - if you have not already done so, you need to enable the Audio Units in the GarageBand Preferences, in the Audio/Midi brick, Effects:

With new iTunes 11 how do you restart podcasts that used to regular pause

With new iTunes 11 how do you restart podcasts that used to regular pause?
Before iTunes 11, a symbol would appear in individual podcast lists showing that the sender requires you to confirm that you still wish to receive their podcast. This used to occur with all my BBC podcasts once a week usually at the weekend.
Now with iTunes 11 this control seems to have disappeared. Tried all the new icons but nothing seems to do this.
Now (as its Saturday) all my BBC podcasts have stopped as there appears no way to reconfirm that I still want to automatically receive them.
Please help!

Here are typical layouts for the iTunes folders:
With iTunes 11 you might also have a Home Videos folder inside iTunes Media.
In the simplest cases you copy the entire iTunes folder from <User's Music> on the source computer to <User's Music> on the target machine, install iTunes, and it "just works"TM.
If the media folder (inside the red outline) has been split out to a separate location then you can copy the library folder (outside the red outline) as before and connect the drive holding the media so that it has exactly the same path as before. If the drive appears as D: on one system and E: on the other then the library won't be able to find the media.
The crucial file is iTunes Library.itl - this contains a record of the tracks that have been added to the library, ratings, play counts, playlists etc.
See also: Make a split library portable.
tt2

How do you install while still using safari

Similar Messages

Maybe you are looking for