How do you really preview all 5 channels in a Dolby Digital 5.1 sequence?

I'm trying to build up a 5.1 sequence and I'm struggle with the lack of information. I've purchased surcode for CS6 but I'm not sure that helps with a preview.
I hacked my realtek card to support dolby but that doesn't seem to make a difference. Only LF, C, and RF put out sound. LS and RS end up in the front speakers.
I've tried most reasonable things so here are some questions that maybe someone can answer?
Has anyone been able to preview in dolby 5.1 with complete isolation of sound by mapping to specific speakers.
If you are using optical what is the method for mapping to channels when it only show "optical"
When I select sound card mapping that shows 8x I can map to specific speakers, but not to optical. It maps, but nothing comes out of speakers.
Summary: I can't get 5 independent channels to map to speakers.  Is it even possible to do this??? If not I wasted a lot of money on surcode.
Thanks
cds

Surcode only provides encoding to Dolby AC3 for file export. What it seems you are trying to do is use the optical output from your sound card to stream dolby digital 5.1 to your monitoring. I did a search on some gaming web sites and found this: http://www.reaper-x.com/2011/04/25/how-to-realtime-ac3-or-dolby-digital-encoding-for-games /  I've never tried it but it might work with Premiere. Other than that you could use the analogue outputs from your sound card, if your amplifier has analogue ins.

Similar Messages

  • HT4753 How do you stop preview from auto save

    How do you stop preview from doing AutoSave?
    Preivew keeps saving different copies of a pdf I am working on (highlighting/annotating), and I now only have 1GB left on my harddrive (had 180GB left).

    If you are using Safari, look at Safari > Preferences > General and make sure 'Open "safe" files after downloading' is not checked.  Other browsers should have a similar setting in their preferences.

  • How can you tell if all photos in an event have a Place assigned?

    How can you tell if all photos in an event have a Place assigned, without clicking every photo in the event individually with the Info bar open to see if there is a little map in the bottom left hand corner please?
    cheers

    Terence Devlin wrote:
    File -> New -> Smart Album
    Event -> Contains -> Name of Event
    Plus
    Place -> Does not contain -> leave the last field blank
    Thanks for that, just getting used to these brilliant smart albums, do I have to have one of these smart albums for every event though? can I not just use it for all photos?
    cheers

  • HT201740 How do you open Preview? I click on the icon and nothing happens

    How do you open Preview? I see it in Finder and click on it, then I see it in the dock and click on it. I go to file open and click. Nothing happens.
    Thanks!

    Quit Preview.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Remove the following.
    Containers/com.apple.Preview
    Preferences/com.apple.Preview.LSSharedFileList.plist
    Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
    Saved Application State/com.apple.Preview.savedState
    Credit Linc Davis  for this solution.

  • How do you bulk download all files submitted to the form?

    How do you bulk download all files submitted to the form?

    I'm using the fileReference code to pull it from my server
    but I dojn't understand how to specify that it needs to be saved as
    an mp3
    below is an example of the code:
    import flash.net.FileReference;
    var fileRef:FileReference = new FileReference();
    fileRef.addListener(listener);
    var url:String = "URL link here";
    if(!fileRef.download(url, "my audio.mp3")) {
    trace("dialog box failed to open.");
    }

  • Hi, You can use all channels. All are having same strengt...

    Hi, You can use all channels. All are having same strength. Use some channel not used by any one else, to get good connection

    Yes, that is true. You can use any channel

  • How can we really delete all artifacts in workspace 9.3.1.?

    Is there a way to really delete all artifacts (all published oce's, bqy's, docs, WA reports, folders, subfolders, etc) from workspace 9.3.1?
    I noticed that deleting a folder does not remove the subfolders and docs from workspace but just makes it invisible. They still exist in the database. If you are able to recreate the sqame folder again (and with alcm you can) the artifact which were invisible are back again.
    Because of this "bug" but also after multiple ALCM imports our testenvironment seems to have problems whic I like to solve by deleting all content and reimporting them with ALCM from file export from production.
    Detlev

    Oracle "advises" to use the Interactive reporting JDK. Using the categorydelete program sample.
    Well as this is fairly new to me I ask some advise from you experts :-)
    I've been reading most parts of the developersguide now.
    As far as I see I have to edit/ create a /cf file when I want to run a batch driver program.
    I am able to run the program (at least it does not complain obout java or other errors anymore. But the batch_file.cf is not yet ready to do what I like to do.
    Any one got a sample to run a recursive deletion of all content?
    Hope to read from you.
    Detlev

  • How do you empty emails all at once?

    Do you really have to delete each email one by one? There is no clear all? No, empty trash? One by one, that it....

    For now you cant. I suspect this will definitely be added in a software update.
    You can set it to permanantly delete the trash after 1 day I believe in settings. At least this is something for now!

  • How do you sample a mux channel, save the data in a digital indicator on interface, then sample the next channel

    I'm using labview 6.1. I want to sample a channel, see if the voltage is within a designated range, post a flag of either good or bad to the interface, and post the voltage measured on the interface, before reading the next channel. I'm a VERY new user to labview and these trivial tasks seem very hard to figure out. Thanks in advance for any help

    Justing,
    To accomplish this task, I would suggest that you use AI Sample Channel.vi (Functions >> Data Acquisition >> Analog Input) to acquire the data and the In Range and Coerce function (Functions >> Comparison) to determine if it is within the designated range. I have created a quick example implementing this architecture and attached it below.
    Good luck with your application.
    Spencer S.
    Attachments:
    IN_RANGE.vi ‏40 KB

  • How do you choose a particular Channel from an Advise.vi to perform an Array Max & Min.vi on that particular channel only?

    Reading all the channels for a FP-AI-100 through an Advise.vi but I need to read the Max & Min from channels 0 & 1. How is this done?
    Thanks

    The easiest way is to use two copies of the Index Array function. You would wire the output from FP Advise.vi to the n-dimension array input of both Index Array functions. For channel 0, you would use the an index value of 0 (on the first Index Array) and for channel 1, you would use an index value of 1 (on the second Index Array). Alternatively, the Index Array function is what is called a growable array function, you can drag the bottom of the node downwards, adding outputs. In this case, you can set it for two outputs and only use one copy of the Index Array.
    Considering that you are relatively new to FieldPoint and LabVIEW, I recommend that you consider using the FP Read.vi instead of the FP Advise.vi. The FP Advise.vi is a more advanced version of the
    FP Read.vi and has more "gotcha's" in its use. To save yourself some debugging headaches it may be easier to use the FP Read.vi. The single biggest difference in coding between the two is that an FP Advise.vi in a loop, automatically times the loop, whereas an FP Read.vi in a loop requires a timer such as Wait Until Next ms Multiple.vi.
    Regards,
    Aaron

  • How do you change the midi channels of a region?

    Lets say i have a region recorded on midi channel 1, how do I change the notes to be midi channel 2? Thanks

    Depends.
    First of all, are you talking about a MIDI region or an Audio region (Audio regions can "be on a MIDI channel", so to speak, if they contain controllers, i.e., volume, pan, etc.).
    So let's say you're talking about MIDI regions for now.
    The first order of business is to recognize that the actual channel of the MIDI events contained in the region is determined primarily by the MIDI channel that your controller is sending on. For simplicity sake, let's say your controller sends on channel 1, and the track you're recording on is set to play MySynth on channel 1.
    If you're wanting to change the channel from 1 to 2, chances are you want to do this to assign this part to play a different sound on a multi-timbral synth. Let's say that the MySynth object -- as seen in the Environment -- is indeed a multi-timbral synth. If the synth selected for that track is currently assigned to play MySynth 1 (i.e., channel 1), just change it to MySynth 2 (from the track's menu).
    Now, if you opened the Event Editor, you'd see that the channel of the MIDI data is still on channel 1! This is normal. Logic is able to "channelize" the data when you select a destination instrument that is on a different MIDI channel from the one that the data was recorded on. So if your track is now set to play MySynth 2, you can go into the Event Editor all day and change the MIDI channel of the data, but it will still be channelized to channel 2 because that track is assigned to play MySynth on channel 2.
    There are many many reasons why you might still want to change the MIDI channel of the data in the Event Editor despite the channelizing that goes on. But without going into a whole shpiel about these kinds of applications, just know that the primary way to change the MIDI channel is to select an instrument on the desired MIDI channel.

  • How do you use the color channel output mode in Ultra Key in Premiere Pro CS6?

    I'm wondering how the color channel output mode is supposed to be used in the Ultra Key inside of Premiere Pro CS6? I've looked through all the Adobe help items and I don't see any documentation on it.

    Before I answer, you might want to read the following article: http://www.photoshopessentials.com/essentials/rgb/
    So, basically, if you understood all of that, and maybe already knew all of that, then you can use the color channel to see more deeply into the effect by looking at the details of the image through the lens of the color channel.

  • Slow Playback in Premiere Pro CS4 (how do you lower preview res?)

    Hi everyone, I was just wondering how to lower the playback/preview resolution while3 editing in Premiere Pro CS4? I'm editing 720p video (.mov format, that's what my camera shoots in, so I don't think I can change that). All I can see when I right click the source monitor is "Quality > High, Draft, Automatic". Is there anything else I can select? (kind of like in after effects, where you can set it to 1/2, 1/4, etc.). I've been searching the internet for the better part of the day and all I've found is that 'quality' menu I mentioned earlier.
    It's still painfully slow to watch on 'draft', and it doesn't look like it makes that much of a difference in quality. Now, my laptop isn't exactly the rendering beast I'd like it to be, but it can handle 720p [slowly] in after effects so I think it should work in premiere too.
    Thanks!
    PS: Any of you experts think this would be a good computer for NLE / rendering effects?
    http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=7192259&Sku=B69- 1277

    Thanks for clearing that up!
    New desktop it is... I'll probably be swapping out the low power drive for a faster one, since Harm mentioned that in his 'building for NLE' thread.
    Oh yeah, one more thing: How can I force it to render? For example, I put an HD clip into the timeline, it has a yellow bar along the top of the timeline in it's location, yet when I hit enter it just plays (with annoyingly low fps)?? Going to sequence > render effects in work area doesn't work either.

  • No Numeric Keypad on New MacBook Pro...How do you RAM preview?!?!?

    Title says it all. My old PowerBook G4 had the keypad accessible with the "fn" key. I just realized my brand new MacBook Pro, doesn't. How in the world do you access the vital preview controls, such as RAM and audio preview?
    Please help!
    Thanks.

    ^Unfortunately, not any more. As I mentioned above, Apple have removed Numpad functions from the current release of MacBook Pros (released February 26 2008). I have a 17" MacBook Pro that is about 8 weeks old, and can verify this is the case. No Numpad toggle. The Numpad variants are no longer printed on the keys because the Fn key no longer provides that functionality.
    This issue is being complained about all over DigiDesign and Apple's forums and The Cow. Strangely, a few of the Fn-key variants still work: Fn-Return=Enter, Fn-Arrow keys = PgUp/PgDn/Home/End. But you cannot create Numpad entries using the Fn key.
    This is confirmed on the "switch To A Mac" website:
    http://switchtoamac.com/site/apple-introduces-keyboard-changes-in-the-new-macbook-pro-mode ls.html
    And here:
    http://pogue.blogs.nytimes.com/2008/01/09/the-vanishing-numeric-keypad/

  • HT2506 how do you set Preview as the default for opening pdf in browser?

    How do I set the Preview application to be the default for viewing PDF's in while in Safari?  Previously, while in Safari and clicking on links to PDF's, they would display with buttons on the bottom that made it simple to view and download the PDF.  Since updating Adobe Reader it seems Reader is now the default application for viewing PDF's accessed from the internet.  I haven't been able to figure out how to revert back to Preview..... 

    I did this and now Safari won't open the form at all.
    I put the files back and it opens in Adobe.
    When I save the files to desktop they open in Preview. But I am trying to read pdf's(? forms) while in Safari.
    Adobe does not work smoothly in Safari and scrolling to read is a nightmare.
    OS X 10.8.5
    This problem came up within the last few months.
    Before everything opened in Preview perfectly.

Maybe you are looking for

  • Dashboard prompts

    hello Guys, I have an issue with regard to the dashboard prompt in OBIEE 11g. I have a column Year that contains the latest 5 years. For latest or current year i.e,2012, what we are doing is doing the MAX (year) and for prior year (i.e.,) 2011, we ar

  • Fail to create an instance of Job

    I try to create a data source with a BO XI 4.1 Universe. My Universe works with WEBI but whenever I try to use it in Design Studio, I get an error message. Caused by: com.businessobjects.dsl.services.dataprovider.DataProviderException: Fail to create

  • Reg : Selection-Screen in LDB's

    hi, Iam  working on a report which uses Logical DataBase : PSJ. Iam getting output based on the standard selection screen of LDB PSJ. Now my requirement is : I need to add a new field(select option) to the Selection screen and the output should be di

  • TS3694 I got error message 1015 when trying to restore settings on iphone 3g any suggestions?

    Can Anybody help me here?  I tried to update the operating system, via Itunes,  on my (second hand) iphone 3G and an error message came up.  I then tried to restore but to no avail.  I got another error message (1015).  I am now unable to use the pho

  • Fonts in windows

    i want to know why the fonts in all the menus are smaller in windows than on a mac and if there is a way of making them bigger please let me know