How do you reinstall Windows 7 on Qosmio X770

I've heard there's an order to what install first etc.
Any tips guys?

Hi
Generally speaking the right driver installation order is recommended but not important.
Of course some drivers and tools requires an installation of other tools like for example VAP (value added package). Its also recommend to start with common drivers like Intel chipset, Rapid Storage and display drivers
However, I found this recommendation:
1 Win7 64bit SP1
2 Sun Java2 Runtime Environment 1.6.0_20
3 TOSHIBA Assist 4.02.02
4 TOSHIBA Bulletin Board 2.1.10
5 TOSHIBA ReelTime 1.7.18
6 Intel Chipset SW Installation Utility 9.2.0.1015
7 Intel Management Engine Interface V7.0.4.1197
8 Intel Rapid Storage Technology Driver 10.1.2.1004
9 Intel Display Driver 8.15.10.2353
10 NVIDIA Display Driver 268,12
11 TOSHIBA Supervisor Password Utility 1.63.51.2C
12 TOSHIBA HW Setup Utility 1.63.1.34C
13 TOSHIBA Flash Cards Support Utility 1.63.0.12
14 TOSHIBA Value Added Package 1.5.10.64
15 NVIDIA HD Audio Driver 1.2.19.0
16 Realtek Audio Driver 6.0.1.6323
17 Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
or
17 Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
or
17 Realtek Wireless LAN Driver 2.00.0013.L_110110
18 Synaptics Touch Pad Driver 15.2.11.1
19 TOSHIBA HDD Protection 2.2.1.13
20 Atheros Bluetooth Filter Driver Package v1.0.7
21 Bluetooth Stack for Windows by Toshiba v8.00.06(T)
22 Realtek LAN Driver 7.038.0113.2011
23 Jmicron Card Reader 1.00.57.02
24 ENE CIR Driver V3.2
25 YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
26 USB3.0 Driver 2.0.34.0
27 TOSHIBA Sleep Utility 1.4.2.8
28 TOSHIBA Face Recognition 3.1.9
29 TOSHIBA eco Utility 1.3.2.64
30 Intel Proset 14.0.2.0.1.s64_wCAT
31 TOSHIBA HDD/SSD Alert 3.1.64.8
32 TOSHIBA Service Station 2.1.52
33 HDMI Control Manager 2.0.0.7.64
34 TOSHIBA Remote Control Manager 3.0.7.5
35 TOSHIBA PC Health Monitor 1.7.7.64
36 ConfigFree 8.0.38
37 TOSHIBA Web Camera Application V2.0.0.21
38 TOSHIBA VIDEO PLAYER V4.00.6.10-A
39 WinDVD BD for TOSHIBA 10.0.5.859 3D
40 Corel Digital Studio for TOSHIBA 1.5.10.332
41 TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
42 TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-16_wMSI
(43 Adobe Flash Player 10,2 )
44 TOSHIBA Media Controller 1.0.86.2
45 TOSHIBA Media Controller Plug-in 1.0.6.1
46 Intel Wireless Display 2.0.29T2
47 TOSHIBA Wireless LAN Indicator 1.0.4
48 PatchFiles
Hopefully I could help you a little bit...

Similar Messages

  • How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

    How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

    Reinstalling Mavericks depends on several factors:
    if you erased your recovery partition
    what OS originally came on your Mac.
    I'll assume you don't have a backup available that you made before your mishap,  because you didn't mention it.
    That's really the take home message here: have a backup!
    If you still have your recovery partition:
    boot into the recovery partition (command R at restart)
    use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
    if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
    If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
    If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
             (the reference refers to ML but it applies just as well to Mavericks).

  • Very simple question, how do you configure windows 8.1 to use a SF card as the default install location for software applications?

    Very simple question, how do you configure windows 8.1 to use a SD card / external drive as the default install location for software applications? Primarily interested in apps installed from the windows store. This should be available in the settings
    charm within the windows store. This must have been overlooked in the development of windows 8.1 or is a bug.
    Regards, Bill
    * update
    I've tried modifying this key and the path:
    “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx”
    http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-do-you-install-apps-in-windows-8-from-the/c4fbe2a8-fd3d-41c1-b9a6-6f881eed374f
    Also tried using symlinks as detailed here:
    http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral

    Here's some links I've used to try to figure this out:
    http://social.technet.microsoft.com/Forums/windows/en-US/2dfc0cd9-7d1b-41de-abce-e03fb6a5a383/metro-apps-not-working-in-windows-8-pro-x64-after-moving-users-and-programdata-folders?forum=w8itproinstall
    http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral
    http://social.technet.microsoft.com/Forums/windows/de-DE/f5e33ac9-beab-4b99-b3ca-7cb5e6f415e4/how-do-you-change-metro-apps-default-install-location?forum=w8itprogeneral
    Regards, Bill
    The registry method does not work with 8.1.  I found this out the hard way.  Doing it on 8.1 will leave you reinstalling the OS if you didn't do a SRP beforehand.

  • How do you install windows XP on macbook and use microsoft access

    how do you install windows XP on macbook and use microsoft access?

    there are two methods to intall windows on your macbook
    1st is through Parellel software
    2nd is through Boot camp.

  • How do you sync Windows Live Mail Calender with iPhone 4 Calender?

    How do you sync Windows Live Mail Calender with iPhone 4 Calender?

    Hey donfrombig spring,
    Thanks for the question. To setup your Live account on your iPhone, see this article:
    iOS: Setting up Hotmail, Outlook, Live, or MSN email accounts
    http://support.apple.com/kb/HT1694
    Thanks,
    Matt M.

  • How do you reinstall the app store on a mac computer?

    I accidentally deleted the app store on my macbook pro. How do you reinstall the app store app on your computer?

    There is no Mac App Store on Mac OS X 10.6.5 or earlier.
    On Mac OS X 10.6.6 through 10.6.8, run the combo updater for your OS version or a newer Snow Leopard one.
    On Mac OS X 10.7 or newer, restart with the Command and R keys held down, and reinstall the OS.
    (125592)

  • How do you reinstall the app store to your ipod

    how do you reinstall the app store to your ipod

    That large yellow font is very hard to read.
    The App Store app can't be deleted but can be hidden by Restrictions. Settings>General>Restrictions
    Have you tried using the Spotlight search. Maybe you just can find it.
    If you go to Settings is ther a Setting for the App store?

  • How do you convert windows programs to imac

    how do you convert windows program downloads to your imac

    You need to use a tool which enables them to be run on the iMac, such as CrossOver Mac, VirtualBox, or Boot Camp.
    (66074)

  • How do you reinstal the old google facepage that was changed by firefox.

    How do you reinstal the old google facepage? On 8-16-12 firefox asked if i wanted the new google facepage. I don't like it and would like to go back to what I had. How do you go back? My email address is jhubertus890 ''at'' gmail ''dot'' com THANK YOU
    '''Moderator edit: De-linked email address to prevent spam.'''

    Hi,
    Can you also please post the link of the affected page.

  • How do you reinstall elements 12 in windows 7 ?

    My elements 12 program is corrupt how do I reinstall the program

    Press Ctrl+Alt+Del and go to Task Manager
    Select the Applications tab. If Elements is still shown as running, highlight and click End Task to force quit.
    You can use the link below to download PSE12 if you have your product serial number. It’s probably best to uninstall first by going to the Windows Control Panel.
    http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

  • How do you reinstall 64-bit Windows 7 in UEFI mode?

    I have a PC with a single hard disk and, a while ago now, I installed 64-bit Windows 7 on it in UEFI mode. 
    The disk has two primary partitions: a C: partition which contains my Windows 7 system and other installed software such as Office, and a D: partition which contains only personal data. 
    (In other words, I don’t have a multi- or dual-boot system.)  
    I now wish to reinstall 64-bit Windows 7 into the same C: partition, again in UEFI mode.
    There is a procedure for reinstalling Windows 7 documented on the following MS Web page:
    http://windows.microsoft.com/en-us/windows/installing-reinstalling-windows#1TC=windows-7
    in the section entitled “Using the Custom installation option without formatting the hard disk”.
    The following YouTube video demonstrates this procedure:
    http://www.youtube.com/watch?v=fr_s29MWOA0
    and it looks relatively straightforward. 
    Essentially, the re-installation starts by inserting the installation DVD into the optical disk drive and running setup.exe while still logged on to Windows 7 with an administrator user ID. 
    At the screen entitled “Where do you want to install Windows?”, both the System Reserved partition (the example in the video is a legacy BIOS installation) and the C: primary partition are visible. 
    On that screen, you simply select the C: primary partition and click
    Next, and Windows 7 is effectively reinstalled over Windows 7. 
    Any personal data in the C: partition is preserved in a folder called Windows.old.
    The big question is, does this procedure work for a UEFI installation? 
    The documentation does not state that it works only for a legacy BIOS installation. 
    If I were to follow the procedure, when I reach the screen entitled “Where do you want to install Windows?”, I would expect to see the EFI System Partition (ESP), the Microsoft Reserved Partition (MSR), my C: primary partition and my D: primary partition. 
    Can I simply select the C: primary partition and click Next to start the (re-)installation?
    It appears that nowhere in the procedure do you specify what mode of installation (legacy BIOS or UEFI) is required. 
    Does the installation setup simply use the same mode as that of the existing installation?
    Does anyone have any experience of reinstalling Windows 7 in UEFI mode, using this procedure or any other method?

    Hi,
    It depends. Do you have Windows 7 DVD? Does your computer have a Boot from EFI Drive option?
    Windows 7 DVD can boot in either BIOS mode or UEFI mode. Different UEFI firmware implementations support different methods for handling the installation operation. The processes for booting the computer into UEFI mode for the Windows product DVD are
    the same. If you can find a boot from EFI Drive option, please perform the suggestions as i referred to.
    If you cannot find any boot option, perform the steps below:
    Use Device Manager's Firmware option and select Boot from EFI Internal Shell.
    Use the EFI internal shell, as follows:
    Start the EFI internal shell from the EFI boot menu and select the drive with the Windows product DVD. The following example assumes that the drive is Fs0:
    Shell> Fs0:
    Start the EFI boot application. For example, on an x64 system, run the following command:
    fs0:> \EFI\BOOT\BOOTX64.EFI
    After the application starts, you may be immediately prompted to press a key to boot from the drive to continue. Press a key to continue booting from the installation media.
    Andy Altmann
    TechNet Community Support

  • How do you install Windows 7 on Macbook Air with a Windows 7 ISO image?

    Macbook Airs have no optical drives, and I can't buy one. I do, however, have the Windows 7 ISO image. And I also have access to a Windows 7 PC. I found an article on CNET on installing from a Flash Drive, but that requires the CD. I also have a hard drive (120GB) and Flash USB (4GB), if they could help. Please help me as many programs I am familiar with are only windows-based. I am tried using open-source software like Wineskin Winery and WineBottler, but to no avail, I always end up confused with them.Please help me.

    Acius wrote:
    Crjohnson, I think you can really help me!
    Okay, how do you use Wine? I don't want to install lots of software like MacPorts, just want the minimal software. So there are many things like Wine, WineBottler, and Wineskin Winery. What do I use for what? For example, I want to turn a windows game (Age of Empires 2 for example) into a full Mac App. How would I go about this?
    I tried researching but it is so in-depth with terminal commands and all(i dont want to risk ruining my computer)
    What is crossover? Is it another wine app?
    Oh, and I tried Winery Wineskin...why doesn't it work? It keeps installing random things like Gecko, or Mono, but in the end, it doesn't work. Do I need the windows app's executable, or the window's apps's installation executable??
    What are engines, and how many do I need to create? I think the best thing for me is to learn wine, because installing windows with bootcamp isn't worth the effort, I think, with me having only a few apps i need to run.
    As for learning mac apps only, well, Windows apps dominate the market with most of applications being made for windows, especially games, with 90% market. So for some apps, there just isn't a mac version available, or if there is, it's costly. (Which you already know I can't buy things)
    You probably cannot afford to buy Crossover either.  It is designed for user friendliness though, but of course Wine cannot run everything.
    Yes you have to learn some things to use Wineskin.  Normally on Gecko and Mono prompt, just cancel them.  Gecko is needed if you have a program using mshtml (its basically a replacement for Internet Explorer for programs that use parts of it).  Mono is a replacement for .NET if your program requires that.  You do not want to install them if you don't need them as they will just waste space.  You can always refresh the wrapper later on and get the same prompts if you find out you need them later.
    You can copy the full installed version of a game inside the Wineskin wrapper and try to set it up that way, but its usually easier to just run the installer and install it inside the wrapper just like you'd install it in Windows.
    An Engine is something you download... its basically a specific Wine build made for a Wineskin wrapper.
    If you do not want to learn Wineskin enough to get in and port your programs yourself, you can often find other people who have done so (at least with games).
    Check out sites like PaulTheTall.com who has tons of Wineskin wrappers already made and ready to go for many games... you just download the wrapper, install the game you want in it using the normal Installer, then its ready to go.  Many you'll need to manually update yourself to Wineskin 2.5.8 though since all the older versions broke ok the OS X 10.8.2 and 10.7.5 update, and Paul hasn't gotten to all of them yet since he has hundreds (including AoE 2 i think).
    There is also Portingteam.com which has tons of pre-made wrappers for games (Including Cider hacks from official games).
    If your talking about non-Game apps though, you can normally find an alternative... many of which are free.

  • How do you run Windows on a Mac?

    I have had a Dual Core MacBook Pro since last July, but I have never run Windows on it. Could someone here please explain to me how I can run Windows on my Mac, how to switch between Windows and Mac OSX, and if Windows Vista is able to be run on a Mac. Or, at least point me in an article already posted on this subject. Thank you!
    MacBook Pro   Mac OS X (10.4.8)   17" Screen, 2.16 GHz Processor, 1 GB RAM, 120 GB Hard Drive

    Please search the discussions before posting. You'll find hundreds of threads detailing how to run Windows on a Mac and could have answered your own question. Or better yet, just search Google.
    http://www.apple.com/macosx/bootcamp/

  • How do you uninstall Windows 10 Dual Boot?

    Hello,
    I am running a dual boot installation of Winodws 8.1 and 10 Techical Preview, and I like to know how do you uninstall the Windows 10 from the dual boot scheme?  I think I've uninstalled previous beta versions of windows 8 by erasing the partition it
    was installed into and that was it.  Is this the correct way to remove window 10 too? Just asking, since the graphical version of the OS boot screen is present in this dual boot installation, does that change anything.

    Hello,
    I am running a dual boot installation of Winodws 8.1 and 10 Techical Preview, and I like to know how do you uninstall the Windows 10 from the dual boot scheme?  I think I've uninstalled previous beta versions of windows 8 by erasing the partition it
    was installed into and that was it.  Is this the correct way to remove window 10 too? Just asking, since the graphical version of the OS boot screen is present in this dual boot installation, does that change anything.
     Logon to your Win 8.1 > press the Win logo key and R key . You are now at Run window> at the Run box type diskmgmt.msc > OK
    You are now at Disk Management window > right click at the partition that house your Win 10 TP > click Delete Volume > the partition is now UNALLOCATED.
    At the left of it is your Win 8.1 partition. Yes ?
    If yes, right click at Win 8.1 partition > click Extend Volume > click Next > at Select the amount of space in MB, type in the maximum available space shown for the unallocated space in MB > Next >  Finish
    The space shrunk for Win 10 partition is now back to your Win 8.1

  • Can I format HDD and reinstall Windows 7 on Qosmio F60 without CD

    I think my hard drive is failing on my Quosmio F60 so I want to reformat the hard drive to see if that will fix it. But I don't have the original packaging and information with me at the moment so I'm not sure if it came with a windows 7 CD or not. Either way, I don't have the CD.
    I found on the net that most manufacturer's who deliver without a CD include a "recovery partition" or "factory image partition" that you can access during boot up. Does anyone know if the Quosmio F60 came with a CD or if it has this recovery partition or factory image partition? Or do you know if there's a way I can check if my computer has it?
    If you have any other information on formatting the hard drive and reinstalling windows 7 without the CD please let me know.
    Thanks.

    The notebook did not come with an Windows disk because there is an tool called Toshiba Recovery Disk Creator which create the recovery disk.
    The recovery partition was available and it allows you to recover the notebook without the usage of recovery disk but this does not work if the HDD has failed.
    Here a nice HowTo about HDD recovery
    http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
    So if you dont have a recovery disk and cannot recovery the notebook using HDD recovery then you have two options:
    - You will order a new recovery disk
    - You would install Windows OS using an Microsoft disk

Maybe you are looking for

  • SAP PI 7.3 Peer certificate rejected by ChainVerifier

    Hi     We upgraded the PI systems(Dev and Quality) from 7.0 to v7.3 Before the upgrade https scenario was working fine. Important thing is we were not using any certificates to transfer files to our vendor.  All the SOAP receiver adapter with HTTPS u

  • JDBC-ODBC Bridge Performance To MS Access

    Hey all, I'm running a Java app that extracts an entire table (set of tables) from Oracle and copies them into Access. The easiest implementation has been to use a DSN-less Type 1 JDBC-ODBC bridge connection to Access, but unfortunately the inserts a

  • Facing problem during file upload

    hi we r designing a portal where it is required to upload files based on individual users who have logged in. For this purpose we r using a file field in one page and http upload tag in another page. The file uploads successfuly to the database, but

  • HT1420 I can't find the "authorize this computer" on the itunes store

    I can't find the "authorize this computer" on the itunes store

  • Automatic graphic switch via Apple Script

    hi community, I would like to change the "Automatic graphics switching" (tick on / tick off) via an Apple Script. I made the following script and it works, except with line "click chckbox 2". Here it ticks the box "Show battery status in menu bar". W