How Do You Remove The Date Stamp Setting On The Powershot A590 IS?

The Date Stamp on our Powershot A590 IS was set by accident, and now we cannot seem to remove it. Anyone know how to change this setting, so that the Date Stamp will not be embedded within our photos (it even seems to be showing up on ALL of our pictures, not just the postcard sized ones . . . but those are our biggest problem, as that's the size we tend to use most)?
Again, I'm not asking how to remove a Date Stamp from a picture, but how to change the settings so that the Date Stamp isn't applied in the first place. 
Any help would be appreciated; Thanks!
-DrSolomonology

Here is excerpt from the manual (p 22): http://gdlp01.c-wss.com/gds/6/0400000016/01/PSA590IS_CUG_EN.pdf
1.
Press the power button.
2.
Select a shooting mode.
1. Set the mode switch to (shooting).
2. Set the mode dial to .
• You can also make this setting in other shooting modes
(except Easy and movie modes).
Select DATE/STAMP
Press FUNC/SET button
Press UP/DOWN or LEFT RIGHT button to change the settings.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Similar Messages

  • TS3212 how can you remove the pop-up blocker when dowload itunes using google chrome

    how can you remove the pop-up blocker when dowload itunes using google chrome ??

    Set that domain as '''Allowed'''. <br />
    https://support.mozilla.com/en-US/kb/Pop-up%20blocker#w_pop-up-blocker-settings

  • HT1349 how  do you remove the header and footer from a document

    how  do you remove the header and footer from a document

    It depends upon the app you are using.

  • How do you remove the SIM card from one iPhone 5 and place it in another?

    how do you remove the SIM card from one iPhone 5 and place it in another?

    With a paper clip?  Refer to the User Guide.

  • How do you remove the simm card from the iphone 4s with no side hole?

    How do you remove the simm card from the iphone 4s when it has no side hole.  The phone was purchased from Verizon so it not a clone or a demo to my knowledge.

    Verizon is a CDMA carrier.  I think your phone may be a 4, and not a 4s.  The CDMA iPhone 4 does not have a sim slot, because it doesn't use a sim.

  • How do you remove the blue dot from next to the podcasts.

    How do you remove the blue dot from next to the podcasts. I listen to 100s of podcasts on my ipod so the blue dot does not leave itunes. I use the blue dot to identify which podcasts are new. It used to be easy to remove the blue dot just play the podcasts for a second in more recent versions of itunes it is harder one has to play it for longer and half the dot is left. How do I select a dozen podcasts and mark them as used. I mean remove the blue dot.

    Hi,
    To Mark as Watched Right Click on the Podcast...
    To Select more than One Podcast... Shift Click...

  • How do you remove the sound from the video's in imovie 08

    hello
    just wandering how do you remove the original imported movie sound in imovie 08 ?
    so that i can play my own sound track, i know it could be done in 06 ,but i just can find it in 08
    any help would be great
    thanks
    yaddle2go

    Just wondering ... can you then add other background music ... and not use the audio recorded from the camera at all?
    Yes. You can add your own audio either to the background of several clips or "pin" it to a single clip.

  • How do you remove the psu from a touch smart IQ790

    how do you remove the Power Supply from an touch smart IQ790.

    please describe what you mean.
    Have you watched the tutorial? http://www.apple.com/findouthow/photos/#places
    Have you gone to the windows menu ==> manage my places?
    are you talking about places in Keepsake maps?
    We can not see your computer and need you to describe in some detail what you want and what you are having problems with
    LN

  • How do you remove the background from an image

    how do you remove the background from an image thathas a white background?

    First, change the background layer to a normal layer if needed, by dragging the padlock to the trash can.
    Then use the quick selection tool or magic wand tool to select your background.
    Now you can either delete the background, or click the icon at the bottom of the layers panel that looks like a circle inside a square. This icon will convert the selection to a mask.
    The advantage of the mask is, it is non-destructible. In that you can change your mind at any time. Whereas deleting pixels is permanent once you close the file and there is no duplicate files. (A way around this is to make a duplicate layer and hide it. But that does make the file larger.)

  • How do you remove the artwork from being visible in the new version of itunes?

    How do you remove the artwork from being visible in the new version of itunes?

    Easy peasy!
    1. Highlight all the songs you want to remove the artwork from.
    2. Pull down File > Get Info (Apple+I on the keyboard)
    3. Click the checkbox next to the "artwork" panel.
    4. Click OK and the artwork will be removes.
    For individual tracks:
    1. Hightlight the track.
    2. Get Info.
    3. Click the Artwork tab.
    4. Click the artwork, click Delete, click OK.

  • How do you remove the credits from the template?

    How do you remove the credits from the template?

    Select your Trailer in the Project Library and click FILE/CONVERT TO PROJECT. Now you can delete the credits slide.

  • How do you remove the case to upgrade the ram for a dm-1 4142 pavilion notebook.

    How do you remove the cover to upgrade the rem for a Pavilion DM-1 4142? Does it just snap off?

    Is this the HP Pavilion dm1-4142nr?
    The RAM bay is generally on the bottom of the notebook. See the RAM Upgrade Guide for details.
    Larry
    Please click the White Kudos star to say thanks for helping.
    Please mark Accept As Solution if my help has solved your problem.

  • Satellite Pro L100 - How do you remove the keyboard

    I have a L100 that has been 'watered'.... don't ask...
    How do you remove the keyboard.. any ideas please
    cheers
    bob

    Hi
    Silas is right. The keyboard is secured with 2 screws which must be removed.
    These screws are hidden under the thin cover near to the keyboard.
    Please be careful! The keyboard is connected to the motherboard with the flat cable!
    I dont know your notebook experience but if you dont know how to do it I would recommend contacting the technician for a help!
    bye

  • How do you remove the borders from a table item

    In OAF I have a set of data stored in a table that I must display. However, I must make it look like it is not in a table. I can't use a tablelayout because it is a set of records and records are constantly being added. How do I remove the borders and the pagination from the table?

    I think you can't do anything about this.
    Change you design as per Browser Look and Feel standards.
    http://www.oracle.com/technology/tech/blaf/index.html
    --Prasanna                                                                                                                                                                                                                                                                                                                                                       

  • Photosmart 8230. How do you Remove the print heads for cleaning?

    Hi guys, I have a Photosmart 8230. After a few lines of printing the black ink fades to almost nothing, all the colours are perfect. There are no error messages. I have done the self cleaning and alignment procedures and wasted a lot of expensive ink. The test page comes out with streaks on the black only. It has been suggested that I take the print head out and immerse it in hot water as a last resort. The question is, how do I remove the printhead? or should I use it as a sea anchor!!
    This question was solved.
    View Solution.

    I just did this to a HP Photosmart 8250 which is in the 8000 series range. I assume they are similar. I was an appliance repair man and have done a lot of other tings in my life, so I decided to take a shot at repairing my 8250 rather than junk it. For 3 Years it was great, only one paper jam, and fast great photos, so I didn't want to give up on it. HP will not repair printers for us, I think because it is too labor intensive, and they can sell a new one for what it would cost.
    I actually fixed my HP Photostat 8250. Its working but the color printing is not as good as it was, yet, but I am hoping that will improve as all of the colored inks work their way through the system.
    Taking one of these apart and putting it back together is like a Chinese puzzle, so its appropriate that they are made in China. Most of the parts inside can be easily damaged if you are not careful. The covers have very clever ideas to their design and how they snap in place. Take your time with the covers and use small tools.
    Getting it back in working condition is another matter. There is a 6 circuit pump and more than a few feet of tubing. I had the side covers off while I tested it and this pump seems to work in both directions. This pump is inside the left side cover. There is another motor with a timing wheel of some kind that stops and starts in both directions at the same time the printhead carriage is whipping back and forth printing. There are other motors also. These things are ingenious. It is surprising that I bought it for less than $100 on sale. It looks like a $1000 piece of equipment inside.
     It would probably be a good idea to not remove the left side cover, but if you do, be very careful around the clear timing wheel. it looks delicate. Below is from an email I sent to a friend and I am revising it to make sense. Remember this is something that really requires training to do this, but I see people today that have the guts to tackle all sorts of projects, so for what its worth, and you asked.
    Under the right side cover is a motherboard, with a bunch of cables plugged into it, small, larger and even ribbon cables. I found it necessary to remove the motherboard. I had a bit of experience working on Canon printers and I would also suggest you take digital pictures as you go so you can view them on your PC. I am also going through this because I don't like being told we can get anything repaired correctly today, its ridiculous that these printers have become just more throwaways. If you want to do this, as a guide, I must have spent 8 to 10 hours doing this, but now I could do it again in 2, that is the learning process.
    Once you get the top off the printer, you will see the printhead carriage. The carriage will be to the right side. The printhead is retained by two screws at the front, (take pictures) a spring clip at the rear and two screws that hold a plastic cover over the six ink hoses that plug into the printhead, its a manifold strip affair. You have to unplug the manifold to remove the printhead, but now I am not 100% sure its necessary to remove the printhead? The ink gunk you will see after you move the printhead to the left is no doubt most of the problem.
     Probably after the hot water treatment as described below, the built in printhead cleaner will be able to resume cleaning the printhead, after the hot water cleans the gunk from IT.
     I removed the printhead like I say below, but first do this. Under the printhead there is a little carriage with a patch of foam rubber that cleans the print head nozzles.This little device works back and forth while cleaning, but while it is parked, with the printer off, it is forward and you won't be able to move the printhead. Use a flashlight to be sure and you will see how to push the cleaner carriage  to the rear and then move the printhead carriage to the left. THEN, you will see the gunky ink mess that has accumulated. This gunky mess I think is the main problem. There are also some felt pads below the cleaning device to absorb some of the ink gunk. I don't know how the HP techs do this, but I used the hot water method below, I had nothing to lose. I would move the printhead first and then you can decide about removing it. I would make sure not to get any of the electronics wet and why I removed the motherboard and why I say take photos. Its hard enough to remember where the different screws alone go, when you are doing this. It can be done, mine is working, even if not perfectly, YET.  You need to be very careful with your fingers, because it is hard to find space to hold onto the printer and whay it might be a good idea to not remove the left side.
    They are so complicated, its just a matter of time before they get gunked up with ink and the printhead begins floating in the mess. I had nothing to lose so I removed the printhead, carefully, taped up all the hoses so they didn't dry out, Then I removed the motherboard to keep it from getting wet, THEN I held the messy ink end under the HOT water in the laundry tub and flushed out enough ink to dye a bathtub full of water. The hot water worked well. Then I let it all dry out. There are some delicate procedures to all of this and it takes time. I think that is why its very hard to find anyone to fix them. Its labor intensive and probably why HP won't repair them.  The print section is the problem, and why I won't buy an All in One printer, Fax, and Scanner. I do buy the extended warranty's now. If you tackle this, take your time, take photos, and good luck. By the way, the 8250 uses O2 print cartridges, is that the type of printer you have, but a lot of this applies to other printers and other brands, and I bet I am not the only one to do this. Before I started this the diagonstics showed no problems, so I assumed it was the the ink aspect of the printer, and not an electronic of mechanical problem. I hope this helps.
    ----- Original Message -----

Maybe you are looking for