How do you repair ntoskrnl.exe error or system error in windows server 2008 and 2012

hi,
can you repair system file errors like ntoskrnl.exe in windows server 2008 and 2012 like like before in windows server 2003 ?
the steps were repairing ntoskrnl.exe error in windows server 2003
1- have a 2003 cd and from that cd start recovery console and copy from i386 directory ntldr and ntdetect.com to windows /system32 directory on the server and then repairing
2- MBR with fixmbr command and then rebuild BOT.INI file with bootcfg/rebuild .
now my question is how you repair or solve such problem with ntoskrnl.exe error in windows server 2008 and windows server 2012
thanks
johan
h.david

first this wil take a lot of time for windows 2008 and 2012 ,
and what about windows 2003 I thing this has no startup repair
thanks
johan
h.david
What will take a lot of time? Repair or clean install? These days one can standup a new VM and have an operating system on it in around 20 minutes or so.
Correct server 2003 is file based deployment and completely different OS from repair perspective as well.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

How do you stop my iphone keep asking for my works proxy server name and password

how do you stop my iphone keep asking for my works proxy server name and password

Having been in IT for close to 30 years what they actually thought was, "whether you can connect your phone to our network isn't out problem, please go away".
They don't want to troubleshoot it. And, honestly, if it's your personal phone, they shouldn't have to. it's not their problem unless their boss says it is.

Undefined error updating Adobe AIR on Windows Server 2008

I am trying to upgrade from Adobe AIR version 2.7.1.1961 to version version 3.1.0.4880.
The operating system is Windows Server 2008 Standard - SP1
I am logged on as the administrator and shortly in the upgrade process, I receive a Window stating:
Sorry an error has occurred
An error occured while install Adobe AIR. Installation may not be allow by your administrator.
Please contact your administrator
Following is the install log:
[2012-02-15:15:56:56] Runtime Installer begin with version 3.1.0.4880 on Windows Server 2008 x86
[2012-02-15:15:56:56] Commandline is:
[2012-02-15:15:56:56] Installed runtime (2.7.1.19610) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2012-02-15:16:02:46] Relaunching with elevation
[2012-02-15:16:02:46] Launching subprocess with commandline c:\users\admini~1\appdata\local\temp\1\air704f.tmp\adobe air installer.exe -ei
[2012-02-15:16:02:46] Runtime Installer begin with version 3.1.0.4880 on Windows Server 2008 x86
[2012-02-15:16:02:46] Commandline is: -stdio \\.\pipe\AIR_15060_0 -ei
[2012-02-15:16:02:46] Installed runtime (2.7.1.19610) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2012-02-15:16:02:46] Starting silent runtime update. Updating runtime from version 2.7.1.19610 to version 3.1.0.4880
[2012-02-15:16:02:46] Installing msi at c:\users\admini~1\appdata\local\temp\1\air704f.tmp\setup.msi with guid {FE23D063-934D-4829-A0D8-00634CE79B4A}
[2012-02-15:16:02:46] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
[2012-02-15:16:02:46] Rolling back install of c:\users\admini~1\appdata\local\temp\1\air704f.tmp\setup.msi
[2012-02-15:16:02:46] Rollback complete
[2012-02-15:16:02:46] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
[2012-02-15:16:02:46] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
[2012-02-15:16:02:46] Runtime Installer end with exit code 7
[2012-02-15:16:04:17] Runtime Installer end with exit code 7
Other notes that might be of use is that I have tried to uninstall Adobe AIR with a similar error message.
I am hoping someone can provide some insight on how to resolve this situation.

Thanks for the links above.
I downloaded and run the Microsoft Install and Uninstall Fix It. Thinking there could be issues with the current version of AIR, I ran the utility and chose to uninstall the current version of AIR; and was successful.
I followed up by restarting the computer and then go to the Adobe AIR download page. When I try to install the new version, it get basically the same error message. The log file from the install is below.
[2012-02-16:18:07:14] Runtime Installer begin with version 3.1.0.4880 on Windows Server 2008 x86
[2012-02-16:18:07:14] Commandline is:
[2012-02-16:18:07:14] No installed runtime detected
[2012-02-16:18:07:19] Relaunching with elevation
[2012-02-16:18:07:19] Launching subprocess with commandline c:\users\princi~1\appdata\local\temp\air11d3.tmp\adobe air installer.exe -ei
[2012-02-16:18:07:19] Runtime Installer begin with version 3.1.0.4880 on Windows Server 2008 x86
[2012-02-16:18:07:19] Commandline is: -stdio \\.\pipe\AIR_2648_0 -ei
[2012-02-16:18:07:19] No installed runtime detected
[2012-02-16:18:07:19] Starting silent runtime install. Installing runtime version 3.1.0.4880
[2012-02-16:18:07:19] Installing msi at c:\users\princi~1\appdata\local\temp\air11d3.tmp\setup.msi with guid {FE23D063-934D-4829-A0D8-00634CE79B4A}
[2012-02-16:18:07:19] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
[2012-02-16:18:07:19] Rolling back install of c:\users\princi~1\appdata\local\temp\air11d3.tmp\setup.msi
[2012-02-16:18:07:19] Rollback complete
[2012-02-16:18:07:19] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
[2012-02-16:18:07:19] Runtime Installer end with exit code 7
[2012-02-16:18:07:19] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
[2012-02-16:18:07:22] Runtime Installer end with exit code 7
Finally, when I try to run the fixit tool again, it is of no practical use as there is no program to repair.
Again, I am hoping someone can provide some insight on how to resolve the current situation

How to Stage directory for Oracle EBS R12.1.1 on Window Server 2008 ?

Hi Every Body,
1- How to Stage directory for Oracle EBS R12.1.1 downloaded from e-delivery.com on Window Server 2008.?
-- I have download all files from e-delivery and check the md5 and all files are OK.
I extracted the entire files with winrar program to the same directory and during the unzipping I was notified to replace these files (dvd.label and component.label) and I agreed each time. So >>
2- Was that a problem ?
-- I have setup vc++ from VS6 , the sp6, cygwin , ... and set up the active directory and the domain.. and all other requirements.
BUT when i started the ebs set up it raise the "*Os User and Group Check*" error.
even if I am the only user and sure I am the Administrator. and also I run this Command to be sure
C:\>net localgroup administrators and it said that the administrator is one of the administrators group.
3- Somebody said that I have to change the temp and tmp folder to be on c:\ drive >> might this solve the problem?
thanks in advance.

Hi,
Most of the instructions you have mentioned , already was configured.
except for the tmp and temp directories.
And even I changed them from System Properties >> Advanced >> Environment Variable under User variable for Administrator and System variables , the problem still exist Os User and Group Check .
I attach the conf_VIS.txt file because I thought it may help.
http://www.4shared.com/document/1bS6aio5/conf_VIS.html
Actually I am not sure about the rapid install patch version but I have download the EBS R12 from the following link and I think it contains the recent installer version
Link >> Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11250138
Note If you still can not open the link just suggest a suitable file hosting and I will upload to you. here I used 4shared and hoped it suits you.

Error In Installing AddOn on Windows Server - 2008

Hello,
I have created an addon on Visual Studio 2005 in Windows Server 2003 OS and then packaged that using B1DE Tool as ard file and run that on my system and the addon is working properly . But when i want to run that addon on system with operating System as Windows Server 2008 the addon is not getting installed and is giving as error message " Incorrect Format " and not even the exe of addon is not running on that server machine .What to do so that my addon works .
Thanks & Regards
Amit

Hello ,
My main problem occurs while creating the ard file .Normally While building AddOn installer file system creates .Ard file in Bin Folder. But when i creates the Ard File by changing the Target CPU as x86 Then a folder named x86 get created in the bin folder of AddOn Installer file without any ard file in that folder.Then i again build the addon installer project and copies the
Exe file of x86 folder & Ard File of Bin Folder and deploy that on Server 2008 .Then the system is throwing a message "
Wrong Digital Signature " that's where i am facing problem while creating ard file bychanging the compile mode to x86.
Please suggest since its causing me problems in deploying on Client Server .
Thanks & Regards,
Amit

Backup Error : The Data Is Invalid Windows Server 2008 R2

Hello,
I have a Problem when I try to make Backups to Partition C in Windows Server 2008 R2:
Error The Data is Invalid.
Obs: I can make backups for System Reserved Partition .
I had the same problem 2 months ago (the data is invalid), Then I folowed this the advice to delete "Framework64\v2.0.50727\Temporary
ASP.NET Files" and worked for me , from this post: http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/89052b85-9c9b-479f-ab76-a20da3cc4696
Now I have the same problem and I delete the
Temporary ASP.NET Files , but it is not working , I received the same error on backup:
"The backup operation that started at '‎2012‎-‎09‎-‎20T07:13:26.024163900Z' has failed with following error code '2147942413'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved."
When I try vssadmin list writers, Everything is ok , "No error" .
I tried to run :
net stop "System Event Notification Service"
net stop "COM+ Event System"
net stop "Microsoft Software Shadow Copy Provider"
net stop "Volume Shadow Copy"
cd /d %windir%\system32
net stop vss
net stop swprv
regsvr32 /s ole32.dll
regsvr32 /s oleaut32.dll
regsvr32 /s vss_ps.dll
vssvc /register
regsvr32 /s /i swprv.dll
regsvr32 /s /i eventcls.dll
regsvr32 /s es.dll
regsvr32 /s stdprov.dll
regsvr32 /s vssui.dll
regsvr32 /s msxml3.dll
net start "System Event Notification Service"
net start "COM+ Event System"
net start "Microsoft Software Shadow Copy Provider"
net start "Volume Shadow Copy"
But is not Working
Any Advice ?
Thank's

Hello Lucian,
the issue may be caused by an invalid entry inside the following registry sub tree.
HKey_Local_Machine\Software\Microsoft\Windows NT\CurrentVersion\ProfileList
Please open the registry editor with regedit.
Expand and local to the subtree, check if there is an entry that has a ".bak" value appended. If so, this may be cause the failure when trying to resolve the SID of the writer.
Please backup the registry key first, and then delete that entry with the extra ".bak" and reboot the server then test the backup
Run the command "vssadmin list writers" and make sure all the writers are stable with no errors
Please look for errors in application event logs after you initiate backup on the server
Sincerely, Asifkhan -- Please mark my post helpful if it was really helpful to you.

Error 0x80070643 when installing DHCP Windows Server 2008 ENTERPRISE SP2 64bit

When I try to install role DHCP on Windows Server 2008 I get the following error:
Attemp to install DHCP Server failed with error code 0x80070643. Fatal error during installation.
Please somebody help me!....
Jorge

Hi Jorge,
I am sorry to hear that.
Here are a few things that I suggest you try:
Grant Full Control for SYSTEM, NETWORK SERVICE and Administrator on C:\Windows\ServiceProfiles\networkservice folder.
If you have Windows Process Activation service installed on the machine, uninstall it.
Open required RPC ports.
More information for you:
Service overview and network port requirements for Windows
http://support.microsoft.com/kb/832017#method7
If the issue still persists, please check the event logs to see if there are any related error messages and troubleshoot accordingly.
Regards,
Amy

Error trying to install SP1 Windows Server 2008 R2

Hi team,
I'm having an error when I'm trying to deploy service pack 1 of Windows Server 2008 R2. I try this scenario installing the SP1 in a workgroup machine and the results were successful. But when I'm trying to install in my Domain it doesn't work. Later I remove
the machine from the Domain and again try to install the SP1 and it also doesn't work.
What permissions in files or procedures can I implement for having a successful deploy of Service Pack 1 in my Domain?
Thanks a lot for your assistance.
Regards.
David S.

Follow troubleshooting
http://windows.microsoft.com/en-us/windows7/troubleshoot-problems-installing-service-pack
http://windows.microsoft.com/en-us/windows7/windows-7-windows-server-2008-r2-service-pack-1-sp1-installation-error-0x800f0a12
Similar problem has been solved here
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c4ac3279-1b2d-44d2-8e2e-08282f0ba270/cannot-install-sp1-on-windows-2008-r2-64bit-error-0x800f0818?forum=winservergen
http://glazenbakje.wordpress.com/2011/12/01/microsoft-windows-2008-server-r2-unable-to-install-service-pack-1-fix/
Regards
Milos

How to Install AS 10g version 10.1.2.3 on Windows server 2008 64bit

Dear
Exparts, Hope you are fine.
Application Server: Standalone 10.1.2.3
OS: Windows Server 2008 64bit
Hardware: Intel Xeion ProcessorI know Oracle Application Server 10g & Standalone my version is 10.1.2.3 is not competible with Windows Server 2008 64bit.
But i need to install. Have any one has successfull experiances to do so ?
Please share and guide.
Waiting for your valuable responses.
ask2learn

Dear Marcus,
Thanks for your reply.
I tried Application Server Stand Alone and success.
So, i closed the thread.

How to download oracle patch set 10.2.0.5 for Windows server 2008 R2

I need download and install oracle patch set 10.2.0.5 and install for Windows server 2008 R2 (notes 1486772).
But I get message "Download basket request for update has been processed. Unable to add 1 new object(s). The objects are already part of Export and to be processed."
Help me, please!

Hi,
Have you looked at this location https://service.sap.com/oracle-download ?
Refer SAP Note 871735 - Current patch set for Oracle 10.2.0 -> Oracle patch set 10.2.0.5
Once you add the Patchset 10.2.0.5 in download basket, you will find the same in Export tab of Download Basket. You will have to get the approval from SAP Export department by raising OSS message with XX-SER-SWFL-EXPORT component. After getting approval for the same from SAP Export dept., then & then only you will able to download it.
Regards,
Bhavik G. Shroff

Error Exporting Printer's Queue Windows Server 2008 ENTERPRISE SP2

When I try to make a Backup the printers on Windows Server 2008 with Printer Migration
I get the following error:
Windows Encountered errors during the migration process.
please anyone can help me.

Most likely someone performed some registry edits that although they got the print server operational, it blocks backups up through the Windows 7 version.
I have referenced a couple ways to get around this issue in the forum. Here's a post with your issue.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/3fb6f67d-c772-44f9-a45d-c9a7a85573a6/i-run-printer-backup-printbrmexe-at-win2008-r2-and-i-have-this-error-the-following-error-occurred?forum=winserverprint
Alan Morris Windows Printing Team

How to disable the "Connect to Second Node" task of the Windows Server 2012R2 and run a customized verision of this task?

I am running a customized ICT. When I am running the ICT on a single node cluster, it is automatically detecting the if remote node is present? I need to disable this feature of ICT and tweak it to have a customized version of this. How to disable this
task?

Hi Sounak Ghosh,
You can customize the ICT by the following KB:
Windows Storage Server 2012: Planning and Deployment
https://technet.microsoft.com/en-us/library/jj643306.aspx?f=255&MSPPError=-2147217396
Server Manager Extension Schema
https://technet.microsoft.com/en-us/library/hh825683.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can service broker work between SQL Server 2008 and 2012, ssbdiagnose returned an error !

Hello,
We have a setup of three applications that sends and receive messages using Service Broker.
One part is on a server, we'll call 'S' have Microsoft SQL Server 2008 (SP3) - 10.0.5512.0 (X64)
The other part, we'll call 'E' use to have Microsoft SQL Server 2008 (SP3) - 10.0.5512.0 (X64).
But I am migrating these apps to a new server, we'll call 'C' that has: Microsoft SQL Server 2012 (SP1) - 11.0.3339.0 (X64)
I have used this command line tool to test it :
ssbdiagnose -E CONFIGURATION FROM SERVICE "//E/S/CService" -S "ServerC" -d EDatabase TO SERVICE "//S/S/ECService" -S ServerS -d SDatabase ON CONTRACT //E/S/ECContact
It returned:
An internal exception occurred: Cannot read property ServiceBrokerGuid.
This property is not available on SQL Server 7.0.
So, I am wondering, is it supposed to work between these two versions ?
As more info, in the previous setup, it was using certificates but I have changed the Endpoints to use only Windows Authentication.
Thanks for any advice.
Claude

Hello,
Many thanks to you and Fanny for looking at my question.
In fact I was unclear, please let me provide you with more details.
Maybe the use of "always on" plays a role here... I will use different names so it might be clearer...
ServerSoftware2008 server has SoftwareDB database.
ServerEmployees2008 server has EmployeesDB database.
Service broker use to work fine between those two above, with certificates.
The new server comes in, two virtual servers with SQL Server 2012 Enterprise Edition with Always On.
I call it ServerEmployeesC but this is the listener. Behind, there is ServerEmployees2012_A and ServerEmployees2012_B and of course, both have a EmployeesDB database.
So, to use SSBDiagnose, I wonder if I need to use quotes around values and if I can use the listener name with FQDN. Concerning the use of instance name in the syntax, there is only one instance per server, is it best practice to use it on the command
line ?
Here is again, my command :
ssbdiagnose -E CONFIGURATION FROM SERVICE "//E/S/E" -S "ServerEmployeesC.sub.acme.com" -d EmployeesDB TO SERVICE "//S/S/E" -S "ServerSoftware2008.sub.acme.com" -d SoftwareDB ON CONTRACT //E/S/E
Again, many thanks for any help you will be able to provide, the people who configured this application at first are no longer here and I am trying to configure the new server in a task of migrating to SQL Server 2012 for one of the two servers involved
and I am having a lot of problems doing it.
Best regards,
Claude

How to add macbook pro with OSX 10.9.2 to Windows Server 2008 Domain

I would like to add my late 2013 MBP running OSX 10.9.2 to my company's Windows Network Domain.
What is the procedure to do so?
Thanks for your help.

You ensure that the Mac is in time sync with the domain controller, you hope that you are not on a .local domain, and then you can use System Preferences > Users & Groups > Login Options > and the Join button. This will provide a simple binding interface. I prefer to use Directory Utility (there is a button to assist you in launching the tool) as it exposes more of the AD plugins features.
Alternatively, this can be scripted using dsconfigad. Or, if you want to explore third party options, there is Centrify, the stuff from Thursby, and others.
Once you have bound the machine to the domain, you can validate connectivity by using the id command in the Terminal. Example would be: id someuser
someuser should be replaced with the short user name of a user in the Active Directory domain. If you get back a truncated record of the account, then you are talking to the domain and should be able to authenticate at the login window.
Be aware that if you have a name conflict (you already have a local account called naresh on the Mac and the AD short name is the same), then you will always login to the local account. Remove the account or rebuild the local DS database and establish a default local admin account without a conflicting name.
AD binding is a very easy and highly recommended task for all Macs in Windows centric environments. It makes the Mac a first class citizen and capable of respecting password policy and access rights. Do not, you can not push GPO to the Macs without tools like Centrify.
Reid
Apple Consultants Network
Apple Professional Services
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

ERROR CODE 8024404 WHILE UPDATING WINDOWS SERVER 2008 ENTERPRISES EDITION SP1

Hi ,
i am getting error while updating windows updates i have tried disable Escan anti virus i tried again to update windows but same error showing

Hi,
Based on current situation, please run this Fix tool. Then check if this issue still persists.
Fix the problem with Microsoft Windows Update that
is not working
If still exists, please refer to the following KB and reset Windows Update components. Then monitor the result.
How do I reset Windows Update components?
Meanwhile, you can also use the System Update Readiness tool and then reinstall the update again. For more
details, please refer to this KB.
In addition, regarding to going further analysis, we can check the WindowsUpdate.log file. It may provide more
details. For detailed operations, please refer to the following KB.
How to read the Windowsupdate.log file
Hope this helps.
Best regards,
Justin Gu

How do you repair ntoskrnl.exe error or system error in windows server 2008 and 2012

Similar Messages

Maybe you are looking for