How do you save your DVD to your Hard Drive, and then convert to iPod?

Hello everyone, I was wondering how you save your DVD to your hard drive and then convert it to the iPod Video.
Please respond.
P.S.
I know that it's been discussed all the time, but none of the posts are useful for me.
Thanks

Hi,
The best option is to pull the card out and plug to your computer UNLESS your computer does not have a card reader. If your computer did not have a card reader, you need to map the cardreader on your printer to your network using the following method:
    http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00149194
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How do you save homemade DVD to your hard drive?

    I just had a friend give me a burned DVD of video he took of an event.  I want to share it on facebook, but I have to find a way to get it saved on my lap top first.  I downloaded Xilisoft to do this, but it's still not working (even though the program said my info was successfully copied).  What am I doing wrong?  Help!

    Hi,
    The best option is to pull the card out and plug to your computer UNLESS your computer does not have a card reader. If your computer did not have a card reader, you need to map the cardreader on your printer to your network using the following method:
        http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00149194
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I store photos on an external hard drive and then delete them from my MacBook hard drive

    I am sure this info is on the support site.  But I can't seem to find it.
    I want to move photos and movies (I'm using iphoto '11, 9.1.3) from my Mac Book hard drive to an external hard drive.
    What are the steps to take to move the photos and movies, and then safely remove them from the MacBook Pro hard drive?
    As an aside, are there any suggestions on external hard drives that work better with Mac (brands, size, Firewire vs USB, etc).
    Nothing sophisticated.  They're family photos, so they are important to me.
    Thanks
    AS

    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    The faster the connection the better,- Firewire or USB II would be the best
    THere are many good ones - I like Other World Computing products or Apple products
    LN

  • Help !!!!!! How do you save a copy of your Zen player's content before formatti

    How do you Save a copy of your Zen player's content before formatting? I have no clue how? I don't want to go through the trouble of re-downloading everything back to my player? Someone Please Help me!!!

    If you reformat the player you'll be erasing all the flash memory. There is no way to avoid re-downloading your content since it isn't going to reappear by magic.
    Normally the PC you use as your primary media library has a copy of all your ripped/downloaded stuff already. I don't see why you're opposed to syncing it back to the player after you reformatting. ?Regardless, if the player isn't frozen or otherwise misbehaving you should be able to drag-and-drop copy to contents to a handy PC with enough space. If you have DRM-controlled content at minimum you'll have to re-sync the associated licenses to make them play again once you copy them back since you can't retrieve the DRM keys off the player. It probably won't prevent you from copying the encrypted files themselves although it may; DRM systems almost uni'versally support a "No Copy" flag for content on the player to prevent copying it back the rights holder chooses to flag the content that way.
    If you're just updating the firmware of the player the contents are unlikely to be damaged in the process (but it is always good to have a backup just in case).
    If your player isn't misbehaving one is left wondering why are you want to reformat it's Doing a "clean up" will often fix most issues of corrupted files and mangled metadata.

  • How do you save PDF to a USB flash drive from iPad 2

    How do you save PDF to a USB flash drive from iPad 2

    You can't, the camera kit connection kit which has a USB connection only supports the copying of photos and videos to the Photos app, and doesn't support the copying of any content off the iPad - you will either need to go via your computer.

  • How do you transfer info from an external hard drive from a PC to a Mac

    How do you transfer info from a external hard drive from a pc to a imac?

    Expanding on what Niel said, a Mac can mount and read just about any hard drive from a Windows system. It can't write to an NTFS-formatted drive without third-party drivers, but it can read them. So as Niel indicated, you should be able to just connect the drive to your Mac and drag-copy over whatever you want. If you want to save things from the Mac to that drive, then it will need to be formatted either as FAT32 or exFAT, or if it's NFTS you'll again need drivers.
    Regards.

  • How do you start up from an external hard drive

    I read the one post about this but i was un clear. Im trying to find out how to do this for my friend with a G3 that is no longer working. They have an external hard drive that is firewire and the newest version of tiger. So if someone could give me a step by step guide how to install tiger on the external hard drive and then run it that way, that would be great. Thanks to anyone who answers and helps.

    I was fooling around with my iBook and an external harddrive where I used CarbonCloner to clone my system. When that was done I found this link:
    http://docs.info.apple.com/article.html?artnum=75459
    Here it says I should:
    Press Option-Command-Shift-Delete during startup
    Bypass primary startup volume and seek a different startup volume (such as a CD or external disk)
    I tried this and my iBook started up from my external harddrive....I think.....i actually couldn't tell the difference by looking at the desktop, everything seemed exactly the same, I guess because I booted from a cloned system....but when I used the keyboard sequence above, I noticed my external harddrive spinning and thought it was doing the work to start up my computer.
    I don't think starting your computer using Target disc mode is right for you....

  • I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0.  Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

    I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
    Bob

    Bob
    What do you have now.....
    What computer operating system do you have?
    We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
    What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
    If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
    If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
    VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
    VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
    Does the above scenario apply to you?
    The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
    the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
    I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
    Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
    1. Place the DVD disc in the burner tray
    2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
    3. Go to
    Get Media
    "DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
    "Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
    Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
    You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
    With this VOB selected, click on Get Media to get the file from there into the project.
    Should work fine.
    Complications may be involved if the people who processed your footage gave you something other what is described above.
    Please review and consider, and then we can plan our project strategy accordingly.
    Thank you.
    ATR

  • I think the DVD player reader on my Mac is going bad. Is there a way to copy the files off of an Apple Install DVD onto an external drive and then do theinstall from the external drive?

    I think the DVD player reader on my Mac is going bad. Until I get it fixed Is there a way to copy the files off of an Apple Install DVD onto an external drive and then do theinstall from the external drive? It's ILife 11 if that makes a difference. Finder won't let me see the files to copy. I know - dumb question.
    Thanks.
    Bob

    Adding an SSD is not a simple endeavour like adding additional memory or adding another hard drive to a Mac Pro. That's probably why the option is only offered as an option at the time of purchase. Even if your Apple store was willing to install the necessary parts you will probably be paying for 1-2 hours of labor plus the cost of purchasing the necessary service parts (SSD, bracket, cables, etc) which I suspect will make the upgrade cost much higher than what it costs to add the SSD option when purchasing a new system.
    I use my system for business and need it to work reliably.  Even though I'm fairly handy with tools I would not be willing to risk damaging my system and voiding my warranty by opening my system and removing the logic board and several other parts in order to squeeze in an SSD option and attach the appropriate cables and brackets. I'm also not prepared to deal with the hassles of explaining why my system has unauthorized parts installed in the event I experience issues and need to make use of my Apple warranty. My time is valuable, so I would probably investigate external storage options, or if I needed the speed of an SSD, I would consider selling my existing system and then purchase a new system configured with an SSD.
    If you haven't already done so I suggest doing a search on 'iMac SSD installation' to see what's involved. It might help you understand why the SSD option is not offered post purchase.

  • My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer see

    My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer seems insistent on doing. Help!!

    11lizzyp wrote:
    can't be saved because the file is read-only.
    I did not create the file to be read-only. I created to be able to continue to add to it as I work on it.
    More on versions here:
    http://support.apple.com/kb/ht4753
    local snapshots:
    http://support.apple.com/kb/HT4878
    Sounds like a permissions problem ie read only.
    If running repair permissions from your DiskUtility.app does not sort it,
    Someone should jump in here with erudite and concise fix.

  • I just saved my iphoto original library to my external hard drive, now how do i create new space on my hard drive and create a new iphoto library

    i just saved my iphoto original library to my external hard drive, now how do i create new space on my hard drive and create a new iphoto library

    Trash the copy of the library you just moved. Then Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    But do you want to have two iPhoto Libraries? Why not just use the one on the External?

  • How can I move (copy) my Time Capsule date to a new 2T hard drive and then wipe the TC and start as a new (clean) Time MACHINE backup?

    How can I move (copy) my Time Capsule date to a new 2T hard drive and then wipe the TC and start as a new (clean) Time MACHINE backup?

    Just use the archive utility on the disk page of the airport utility manual setup..
    If you have lion and v6 airport utility.. it missed out. On lots of things.
    Download and install the real.. UTILITY
    5.6 http://support.apple.com/kb/DL1482

  • Can some please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates?  I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my Mac

    Can someone please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates?  I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my new Mac.  I ended up getting a bunch of duplicates. My old Mac has an older version of iPhoto while the new Mac has iPhoto '11.  Is that the cause of the problem?  Please advise.  Thanks.

    Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
    Then launch iPhoto. That's it.
    This moves photos, events, albums, books, keywords, slideshows and everything else.
    Regards
    TD

  • I bought a used macbook air,  it didn't come with the flash drive to do a factory reset.  Can I download the info needed and save it to my own flash drive and then do a factory reset?  If not what can I do?

    I bought a used macbook air,  it didn't come with the flash drive to do a factory reset.  Can I download the info needed and save it to my own flash drive and then do a factory reset?  If not what can I do?

    If it originally shipped with Mac OS X 10.6.8 or earlier, click here, phone Apple, and order a replacement.
    If it originally shipped with Mac OS X 10.7 or newer, restart it with the Option, Command, and R keys held down.
    (113079)

  • I want to burn all my genuine-store-bought-nothing-illegal-here DVDs to a hard drive and want to know what the best program is to do this is. Thank you!

    Could someone please suggest a program or software which is easy to use and won't confuse the life out of me. I'm not very tech savvy!! Haha *sigh*

    The easiest option would to purchase a backup hard drive and store your data there. Hard drives are getting cheaper all the time, and all you have to do is drag and drop. Lots of good choices here, but I've had good luck with the super-reliable G Drive and the Seagate Freeagent Go.
    When it comes to transferring the DVD, there are some legal ambiguities to address. Strictly speaking, by strict application of copyright law, it's even illegal to copy content you own. In short, if you purchased a DVD, it can't be copied. However, "fair use" is often used to justify copying content - movies or software - that you've paid for already. That means you'll have to "rip" the DVD. Since powers at Apple are likely to object to fair use arguments, you'd best to investigate the details on your own.
    Post here if you have any more questions, or comments, or anything!

Maybe you are looking for