How do you set-up multiple NT Auth servers per Domain, but one per role

I have a domain with three roles. These roles correspond to subsidiaries of our company, each with their own NT Auth Server. Shouldn't I be able to put in the NT information at the role level and not in the code for the iwtLoginChannel or on the domain Auth pages?
What happens is I cannot authenticate any if I try this. If I try with the Host listed in the HTML for the iwtLoginChannel it works fine.

Roles are used to assign a set of attributes (such as setting user preferences for different applications/channels) to a group of authentication authenticated users. Hence, it is not possible to assign a role, before the user is authenticated.
A solution to your problem is to assign different NT Domain users to different iPS domains as iPS domains are identified using the Gateway URIs.

Similar Messages

How do you set up multiple accounts in itunes so phones don't automatically sync each others data ?

How do you set up multiple itunes accounts to prevent multiple phones from sharing contact data?

To add to Rod's answer, I have been blogging to explain more in detail the work flows for Question and Score slides, and some tweaking possibilities in these articles:
http://lilybiri.posterous.com/question-question-slides-in-captivate
http://lilybiri.posterous.com/question-question-slides-part-2
Lilybiri

How do you set up multiple time capsules in my home?

I have one time capsule for my information and my roommate has another. They are in the same room. How do I set them up so our information doesn't get confused?

I doubt you will have confusion.. if they have different names.. then network wise they will be fine.
ie You set up your TC named TCTom / TCJulia.. and the other person has his/her TCHarry / TCHarriet.. then clearly they are different..
You can have wireless issues though. If they connect via the same network.. then use ethernet and turn off wireless. Or make a pact and share wireless on one. ie the TC can be plugged into each other.. but wireless only working on one.. they will both be equally accessible and work equally well.

How do you set up multiple IP addresses on a web server?

I have a block of 8 fixed IP address, 5 are useable for websites. I have a netopia router and I would like my server to be able to host several different sites using a secure server. I know you can only host one secure site for one fixed IP address. I have been using one IP address and hosting virtual domains up to now. I don't know how to set the router and the server up to make this work. Everything I have tried has failed. I have tried IP mapping and passthrough but I can only make one IP address work. Not multiple. Any advise would be appreciated.

Since you're looking to host multiple SSL sites, no matter what you do you're going to need to setup multiple IP addresses on your server.
I would NOT recommend running the server at your edge - there are valid reasons for using firewalls and NAT devices. Instead, configure your server with multiple private IP addresses (192.168.x.x or 10.x.x.x, whatever you prefer).
Then, in Server Admin, configure your SSL web sites. Bind each one to a specific IP address.
This is different from your non-SSL web sites, which presumably have 'any' as their IP address.
Then setup your Netopia router to port-forward port 443 on each public IP address to the corresponding private IP address on the server.

How do you set up multiple from addresses in mail

on my ipad when I set up email accounts, i can enter multiple addresses in the Email field, separated by a comma, which is located on the keyboard far right, second symbol screen.
On my iphone 5 there's NO COMMA that I can find on any of the three Keyboard screens when you're in the Email field.
What's up with that?
I'm running ios 6 on both devices

Beth, I ran into the same issue.
What I did was this:
(1) Go into the Note app and enter your comma-delimited list of email addresses.
(2) Copy the list and paste it into the Mail settings where you tried to enter it.
It works fine that way.
Note however that if you are using the default Gmail settings there isn't a separate field for your email address and username - they are the same. So you will get an error when you try to save. However, if you use the manual setup where there are separate fields for username and email address this will work.
You can even add the extra email addresses to another non-Gmail account and when you try to send you can select the alternate email address.
doug

HT201304 How do you set up multiple game center profiles on a single itunes account? Example, my daughter is too young for her own account but wants games on her ipod touch with her own profile. Any help would be great.

How does one set up more than one game center profile on a single itunes account? For example, my daughter is too young for her own itunes account but would like her own Game Center profile to except invites and play games with her friends. Any help would be greatly appreciated.

Maybe:
Multiple game center accounts for...: Apple Support Communities

How do you set up multiple users? Netscape use to let me choose which profile to start. Can I do this with Firefox and can I have email linked to each individual user/login? How?

Netscape use to let me choose and create new profiles. after clicking on the icon for netscape i was prompted for which user profile i wanted. can i do this with firefox? also, each user profile was linked with its respective email account. can i do this through firefox as well? I need help. i have tried setting up firefox before and since i couldn't accomplish this i had given up but netscape is so old and most sites cause it to crash, i need a solution. i have 2 main profiles and 2 different email addresses. any advice or help, even not firefox related would be great

Firefox doesn't have the same type of interface for the Profile Manager that Netscape did. You might want to look at SeaMonkey ''(which uses the same Mozilla Gecko code as Firefox has)''.
http://www.seamonkey-project.org/

How can you set up multiple apple ids on one computer

it says something about 90 days

Not sure what you mean about 90 days.
Everyone with an Apple ID should have they own user account.

How do you set up a MacBook Pro and a PC with one Airport Express?

I have a MacBook and my roommate has a PC and we're trying to set up my new Airport Express at our college so we can hook up our computers and printers to it. I had it so that my laptop worked fine, but hers would "connect" and not really have any internet connection at all. Class starts on Thursday, so help would be kindly appreciated!

I'm a great believer in the KISS principle.
Configuration is simple if you start from a factory default condition. Connect the Airport to AC power and finally to the Internet modem (or modem/router). Open Airport Utility on your Mac or other computer and accept all of the recommendations. After confirming that it works, insert your desired administrative and WiFi passwords.
Do not expect the Airport to respond instantly to the configuration commands. BE PATIENT!

How do you set up airport extreme with a windstream all in one modem with the wireless router built in

I have a wireless network that I want to extend so there will be wifi coverage all over the whole house. I want to use the airport extreme to do so. so far all i can get to work is the airport making another network via a eithernet cable that is pluged into one of the ports on the windstream wireless router/moden (all in one you plug the phone line into this and it has the wireless built in) and the other end is in the WAN port of the airport. I guess the real question is do I need to change any settings on the windstream wireless router/modem to do so. Every time I select all the options to extend a network wirelessly I keep getting errors.

The Airport Extreme can not wirelessly extend a 3rd party router, it can only extend another Apple router. If you can somehow keep the two connected via ethernet, you can setup a roaming network. A roaming network is essentially "extending" your network by using an ethernet cable to bridge the two routers.

TS2446 How do you reset your security questions, I have forgot all but one

How the heck do you reset security questions, I have forgotten all but one

Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

How do you set the duration for multiple stills in iMovie 2013?

How do you set the duration for multiple stills in iMovie 2013?
Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
REALLY??!!

...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
Because often people are animating to words or beats in the music. Music is rarely performed with a computer-precise beat and tempo. Musicians aren't robots: they swing the beat sometimes. They use rubato. They change tempo. They change time signatures. As a result, you have to FIND those words and beats. It's not a situation where you can say, "There! I've found the duration of one beat! Now it's easy to find the rest of them!"
If you try it, you will be very disappointed.
Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out. You'll see that it's trial-and-error: what's the point where it becomes inaudible? It depends on how high your speakers are turned up. You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume. You might say, "Hey! The music ends before the layer ends!"... but you KNOW you set the layer's out point when the audio file goes silent.
AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures. Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works. For true accuracy, you need find the timings yourself.
If you want something simpler, try a different application. But be prepared for lower level of accuracy.

How do you use the Multiple Item Information dialog box ???

How do you use the Multiple Item Information dialog box ???
Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
1. The way iTunes sorts tracks and albums
2. The reason to select a leading check box
3. Why there are Option selections (Yes /No) and leading check boxes.
4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
Thanks

As Christopher says, it's a compilation. Different tracks are by different artists.
Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
tt2

How do you set up separate facetime accounts under one apple id

how do you set up separate facetime accounts under one apple id

This is possible, but I haven't found any official Apple topics about it, so I will share a nice web article about it on a Mac fan website:
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
Hope this helped!

How do you set-up multiple NT Auth servers per Domain, but one per role

Similar Messages

Maybe you are looking for