How do you set up the paypal standard gateway to work without a web form?

I must have missed a step.  I have this site set up and the paypal standard gateway does not work with a web form, but works with shopping cart.  Does that mean I need to disable the web form page and use something else to check out?  How do you do this?  The BC help page on this stops at this point in describing what to do. 

For those who are running Windows and controlling the Airport Base Station with Airport for Windows.  Apple just came out with a firmware update for Airport Extreme (7.7.2).  It so happens that this Firmware version requires Airport Software version 6.3 or newer.  The Windows version only goes as high as Version 5.6 or so.  I was also told that Apple is unlikely to upgrade this software.  To make a long story short you need to control (Configure) your Airport Base Station with an iMac, or an iPhone or iPad with the Airport app.  This solved my problems.  Good Luck :)

Similar Messages

  • How do you set up the passkey between the Mac & Palm?

    Hi all,
    I need help with a couple of things relating to bluetooth and Mac;
    a) when I try to HotSync the Palm TX and iBook(OS 10.3.9) using BT, I get an error message saying "can't initiate Hotsync because port is in use by another application'.
    b) how do you set up the passkey between the Mac & Palm? I can't work out how to input anything on the Palm at the step where it asks for the passkey.
    thanks
    iBook 1.2GHz   Mac OS X (10.3.9)  

    Palm has this to say about the issue:
    'Unable to initiate HotSync operation because the port is in use by another application.'
    This error can occur on the Palm™ Zire™ 72 handheld after setting up a Bluetooth® HotSync® connection. When you configure the Bluetooth application on the handheld for synchronization (or when you set up a Bluetooth connection in the Connections preference screen), the HotSync button in the Writing Area may try to launch a Bluetooth connection, regardless of the connection selected in the HotSync application on your handheld. The HotSync icon in the Writing Area will always try to connect using whatever method was last used. When you set up Bluetooth HotSync, it used Bluetooth, and now tapping the icon in the Writing Area will result in a Bluetooth connection.
    The issue arises if you launch the HotSync application on your handheld, and select the "Cradle/Cable" option from the pulldown menu, and then tap on the HotSync icon in the Writing Area. Your handheld will still try to perform a Bluetooth HotSync operation, because that was the method last used. You will see an error message, and won't be able to synchronize.
    Unable to initiate HotSync operation because the port is in use by another application.
    Why does this happen?
    Because your handheld was set up for Bluetooth, tapping the HotSync icon in the Writing Area should launch a Bluetooth HotSync. But if you select a different method in the HotSync application, your handheld will try to connect using that method as well. The HotSync application is unsure which method to use, and you will see the error message.
    What should I do?
    If you see this error, here's how to correct the issue:
    1. Launch the HotSync application on your handheld.
    2. In the pulldown menu at the center of the screen, choose the connection method by which you wish to synchronize.
    3. Then, instead of tapping the HotSync icon in the Writing Area, tap the large onscreen HotSync icon in the middle of the HotSync application screen.
    4. Do this every time you wish to synchronize using Cable/Cradle.
    5. Whenever you want to synchronize using Bluetooth, exit the HotSync application and tap the HotSync icon in the Writing Area.
    6. This will allow you to keep multiple connection methods for synchronization, and the flexibility of alternating between them.
    For more information on such issues, perform a keyword search here, in the Palm Macintosh Support area:
    http://www.palm.com/us/support/macintosh

  • How do you set up the stock and weather ticker on notifications?

    How do you set up the stock and weather ticker on notifications?

    The next question will be what weather and stock apps will display data in Notifications similar to an iPhone. Sure there are lots of apps available but nothing I found will duplicate the features found on the iPhone.

  • How do you set up the alert for FaceTime with sound

    How do you set up the alert for FaceTime with sound?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
     Cheers, Tom

  • How do you set up the passbook?

    How do you set up the Passbook with the new iOS6 software?

    I would highly suggest searching the community before posting in this case since this discussion is currently going on in a lot of threads.   Long answer short - wait for your apps to be updated by the developers and then you can link them - as of right now, only Fandago and Walgreens have update.

  • I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

  • How do you turn off the auto select behavior when working with shape layers?

    How do you turn off the auto select behavior when working with shape layers?
    I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
    If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to  turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.

    As far as i know the move tool options don't have any effect on the path selection tools.
    You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
    you can shift click with the Direct Selection Tool or Alt click to select the entire path.
    more path shortcuts:
    http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml

  • How do you set up for AirPrint an HP110A wireless printer without a PC on a wifi network using a Verizon FIOS router)

    Purchasing an HP110A wireless printer for my 85 year old father who has and Ipad
    This pritner is fully compatible with Airplay per HP site
    My dad has no PC
    He knows the router passcode.
    What is the process?
    Will the HP printer to be purchased shortly work out of the box w/no drivers
    How do you set the printer up to work on the iPad?

    Richard-
    I have the HP D110 AirPrint printer.  As I recall, it was configured in Ad Hoc network mode when first received.  It was necessary to set it up to access my WiFi router before I could use it with the internet connection.  Then, as part of the setup process, it downloaded the latest firmware update from HP.  This was all done from the printer control panel, and no PC was needed.
    As Pvonk mentioned, your router must be able to correctly handle Bonjour data for iPad to print to an AirPrint printer.  Go ahead and try it, it may work.  If the iPad can't find the printer, you will need to contact Verizon for help in configuring the router or getting a different router that is compatible.
    By now, you should realize that a PC is needed to update the iPad.  I assume your Dad visits you when he needs use of a PC.
    Fred

  • How do you set/change the default alarm TYPE in iCal?

    I like to think I'm a power user, but this one I just can't figure out.  The question/problem is: How do you sent the default alarm TYPE in iCal?  The problem is illustrated in the picture below in the blue circled area.
    Specifically, whenever I set a new event in iCal, it defaults to this window with the default alert being "Default (1 hour before)."  The one hour before is fine, but the problem is, WHAT is the default?  It seems to be just a sound, but that's not good enough to actually alert me of anything.
    The goal I'm trying to achieve with this post is to determine how to CHANGE the "default" new event alert FROM "Default (1 hour before)" TO one of two alerts that I actually find useful:  I want MY "default" new event alert to be either "email" to the primary address, OR, "Message with Sound". 
    Any ideas, folks?  Thanks.

    Understand.  I am in the edit mode for my contact.  I see all the contact info.  There is no right click or other means to change the DEFAULT address that autofill uses (it also is first to appear if I type my name in an e-mail). For instance for a group e-mail you can change the default addresses of each contact by control-clicking on the group in Address Book. I can't seem to make the default change in my v-card.

  • How Do you set up the IPod Touch to your pc home computer - when it asks for a password - what password is needed?

    I just received an IPod Touch for a gift. Have a home computer through Charter. Have wi fi with pc at home.  I am unable to get the Ipod to work with the pc and wifi. 
    Wi fi is on - At choose a Network - Have the option of t.dillow and other.
    When i choose tdillow it asks for a password.  What password is required?
    I cannot get my email either.
    How do I get the IPOD to connect to my wifi and enable to use mail through Yahoo account?

    You need the password for your network/router. Sometime the dfault password is on a sticker on the router.  As the person who controls/set up the router.

  • How do you set up the ipod touch warranty?

    I'm getting the new iPod touch soon so I wanted to know ahead of time how to set up the warranty.

    The warranty goes into effect automatically from date of purchase.
    You can register your iPod here >  Apple - Product Registration - Welcome

  • HT201250 How do you set what the Time Machine window shows?

    I just bought a Time Capsule and started using Time Machine.  The window that appears when selecting "Enter Time Machine" shows the desktop, but not the Hard Drive.  I want to see the contents of the HD, not the desktop.

    erickfrombloomfield wrote:
    I thought Time Machine made a clone of my boot drive.
    TimeMachine copies your entire boot drive, but it's not a clone. Clones are near 100% exact copies of your boot partition.
    TM every so often updates with a "state" representing a day, it only saves the changes between states so this way it's not making your external drive full in a couple of days.
    You go through the "states" to pick the copy of the file you want to restore with or the entire drive.
    So that is not true?
    TimeMachine is not a clone.
    Aclone is a exact image of your boot partition, just like you picked up all your software and placed it on another drive.
    Clones can be updated, and now even save the "states" between clones, but then it's not a clone anymore as it's not a 100% copy, but a bootable clone + backup.
    How can I make the Time Machine copy on the Time Capsule bootable?
    You can't, a TimeMachine can only restore, not bootable although I hear it's possible to boot to restore only.
    Or how can I make a clone on Time Capsule?
    You don't. The softwre and technology is not compatbile.
    If you want a clone be able to boot from it, and see everything on  the drive like any other, then you need to use a new blank drive and Carbon Copy Cloner, then it's a option key bootable clone drive.
    TM or TimeCapsule can't do this, it's a backup system, not a clone.
    If you want to learn more about TM you can visit this site
    http://pondini.org/OSX/Home.html
    I don't use TM at all, it's for newbies mostly. It takes a long time to restore with as it has to go through all the states to grab files.
    Power and seasoned users use clones so they also can boot from them, make more clones or run the computer if the drive dies etc.etc.

  • How do you set up the tracks, Dual Layer project

    I have a dual layer disc and project.
    The breakpoint will be in the middle of one of the programms. But i don't want that.
    Now i want to had a 'hidden' track on layer 0 (so it becomes larger than layer 1)
    But how does dvdsp4 calculate whitch tracks goes on what layer?
    I've tried to put the hidden track in the outline between track 1 and track 2. But watching dvdsp4 muxing he doesn't put the hidding track between track 1 and 2, but totally at the end.
    p.s. the hidden means it doens't have a button on the menu, so it isn't acceseble for people. it's just there to make layer 0 larger than layer 1.

    Since you are using DVD SP 4 go to the VTS view in the outline tab. (Press F3 Key, click on outline view, and you will icon at top right in that section [still of left side of the screen] where you can toggle the screen from the list you see to somehting that will list VTS) A pciture of what I am describing is on Pg 589 of the PDF manual.
    Drag the "Hidden" so that it is between the VTS for track 1 andd tracks2 (and make sure that there are markers on it (a few at least) so that (hopefully) there should be a layer break in there.

  • How do you set up the Do not disturb settings?

    Does anyone know how to set up the do not disturb settings?

    go then to notifications  touch the do not disturb and gives u the options from whom is to be allowed and the times

  • How do you set up the update password page in ADFS 3.0

    Hello,
    We have recently migrated to ADFS 3.0.  Everything is working except the update password feature.  In the KB article
    http://technet.microsoft.com/en-us/library/dn280950.aspx  the section under Update Password says that I need to enable  the ADFS endpoint -
    /adfs/portal/updatepassword/ and restart the ADFS service.
    This has been done, but when I go to
    https://sts.domain.com/adfs/portal/updatepassword.  All I get is a page that says "An error occurred.  contact your administrator."
    What I am trying to accomplish is this. 
    http://technet.microsoft.com/en-us/library/dn280950.aspx
    Any help would be greatly appreciated.
    Thanks
    Cheston

    it does not work domain joined machines! yes, I know. you are not the first one trying. it should also support domain joined machines, but unfortunately it only supports
    workplace joined machines
    <QUOTE>
    The update password page is only available for Workplace Joined devices
    </QUOTE>
    on the domain joined machine you can just use ctrl+alt+del to change the password
    Cheers,
    Jorge de Almeida Pinto
    Principal Consultant | MVP Directory Services | IAM Technologies
    COMMUNITY...:
    DISCLAIMER: This post is provided "AS IS" with no warranties of any kind, either expressed or implied, and confers no rights! Always evaluate/test yourself before using/implementing this!

Maybe you are looking for