How do you update the ipad 4.3.5 with a computer?

how do you update the ipad 4.3.5 with a computer?

Update it from iTunes on a computer as described at the bottom of this article; there isn't a Software Update option in General on iOS versions prior to 5.0. It can only be updated directly to the newest iOS release supported by the device’s hardware, which is iOS 7.1.1 for devices with at least 512MB of RAM.
The maximum iOS version for the third generation iPod touch and original iPad is 5.1.1.
If you don't know what device you have, append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
(108171)

Similar Messages

  • How can you record the screen of any device with no computer and no jailbreak?

    I would like to record the screen to record my gameplay and other stuff. Please help.

    Josh, this was my first gripe when I moved to IronPort toward the end of 2008; I forget the version of Asyncos we were on then. Remember that the design philosophy (as I'm given to understand it) is that you shouldn't have to nursemaid it as much as some other gateways, though achieving that is more a question of developing robust mail policies than simply plugging in the device and running the setup wizard.
    I found the Asyncos GUI a bit of a pain to work with for header analysis, but I've adapted over time. It's only an annoyance now when you need to see an attachment file name that scrolls across three or four screen widths, and by comparison SharePoint gives me more grief in that department (we're on a paleolithic version here).
    For some things we send a copy of quarantined items out to a dedicated mailbox only accessible by staff monitoring our gateways; for more details see my posting in your thread "Can't View Video Files Attached To Emails".

  • I cannot update my iPad and notes it cannot be updated due to unknown error (6). I have not yet updated my Macbook to Yosemite (which I do not intend to do so yet) so would this be the problem and if so, how can I update the iPad?

    I cannot update my iPad and notes it cannot be updated due to unknown error (6). I have not yet updated my Macbook to Yosemite (which I do not intend to do so yet) so would this be the problem and if so, how can I update the iPad?
    Thanks,
    glhiker

    Hi glhiker,
    I understand that you may be having some issues with your ability to update your iPad. Here is an article that references your error code and can help you take some steps to resolve it:
    Resolve iOS update and restore errors - Apple Support
    http://support.apple.com/en-us/TS3694
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • HT4623 My iPod don't have software update link under general menu? How do you update the latest version

    My iPod don't have software update link under general tab How do you update the latest version?

    To update
    The Settings>General>Software Update comes with iOS 5 and later.
    Connect the iPod to your computer and update via iTunes as far as your model allows
    iOS: How to update your iPhone, iPad, or iPod touch
    A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
    A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
    A 3G to 5.1.1  Requires iTunes version 10.5 or later
    A 4G to 6  Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
    Identifying iPod models

  • HT4623 How do you update a iPad 1 to iOS 6.0 ?

    How do you update a IPad 1 to 6.0 when it is showing no no software update in the setting?

    Fatboy Butch wrote:
    How do you update a IPad 1 to 6.0
    You cannot.
    The iPad 1 can only go as far as iOS 5.1.1

  • How do you add the ipad device to your itunes account? Please!!

    How do you add the ipad 2 device to your itunes account

    There is no need to add the iPad, just sign into your iTunes account when you need to.

  • How do you connect the iPad too, How do you connect the iPad to apple tv

    How do you connect the iPad to Apple TV

    On the same network and same apple ID with home sharing turned on they should connect.

  • Changing SSL Cert, how do you update the trust profile for devices.

    I am in the process of changing out the ssl cert for the trust profile (going from a self-signed to a signed cert).  How do you update the trust profile on the devices already paired with the server.

    Yes, the linked smart object can be either raster or vector, but they will be placed as raster images, just as the embedded SO are.  SO can be embedded or linked to an outside file.  Edits to the original will not update in the original until you select "Update modified content from the menu" when you reopen the file that has the place SO in it.  otherwise it will update when you save the linked file.  Yes, there still is an advantage to having an embedded SO.  You may not want to maintain the links - send a file off and forget to include the linked files.  You may want to alter the SO, but not the original file.
    Ah, thanks. But does this mean that raster and vector smart objects can EITHER be located within the Photoshop file (as they have been since their advent) OR linked to an external file?
    And if so,
    1. Can this linked file be either raster or vector?
    2. Do edits to it automatically update the Photoshop file?
    3. Is ther any longer any advantage to having the smart object data stored within the Photoshop file when it can be linked?

  • How do you calibrate the iPad battery?

    How do you calibrate the iPad battery and is it necessary to discharge battery 100%. I have  the 3 rd generation iPad, it has been almost a year since I purchased it and the battery when fully charged reads 100%. Recently, I visited my local Jump Plus store and the staff said I should drain the batteries on my iPad & iPhone completely until they are dead and recharge once a month. Is this accurate?  It is my understanding that you should not drain the batteries completely? Also, is that the same as calibrating the battery?

    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    http://www.apple.com/batteries/ipad.html

  • I have the Apple IPod touch 4th generation. How do you update the iOS HELP!

    how do you update the ios on an ipod touch 4th gen.

    If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972

  • How do you configure the ipad to print air print but of A4 size please ??????

    how do you configure the ipad to print air print but of A4 size please ??????

    Frankie,
    The usual setting is in Printing Preferences.
    In case you haven't found it yet - it has been a while since your original post - you may have your tray setting stuck on the 4X6 tray.
    I can provide details and "how-to" if you need more help.
    Printer model info would be helpful, and do you have your printer software loaded yet?
    I hope this helps!                                 
    We work hard to help!
    When ever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
     2012 Year of the Dragon!
    Dragon Tips!
    Install your Printer Software!
    Look for your Printer’s Software at your printer’s own website!
    Software, manuals, alerts, “how-to” information, and much more!
    To see if there is software for your printer, Start at:  Support and Drivers
    Kind Regards,
    Dragon-Fur

  • How do you clean the iPad magnetic cover? Mine is light gray, I did not pick the color as I got it from work.

    How do you clean the iPad magnetic cover? Mine is light gray, I did not pick the color as I got it from work.

    You can clean any mild soap(no harsh chemical) as i do mine i just take it off ipad from cover wash throughly inside and out and hang it until dry.

  • How to you update the html once a Mail app is published?

    I have a sample Office 365 Mail app
    https://code.msdn.microsoft.com/vstudio/Outlook-Email-Forwarder-App-650a5b41/view/Discussions/0?showDiscussionForm=True
    The app loads great and I can see run it ok. But if I update the HTML page it never gets updated. How do I update the code for the mail app once it is up and running? I was able to update it once but  am not sure what I did.
    Any suggestions?

    Hi,
    >> But if I update the HTML page it never gets updated. How do I update the code for the mail app once it is up and running?
    In debug mode, you need to reload the app by click the mail app to reflect the changes.
    >> How to you update the html once a Mail app is published?
    If you have already published the web application (for example, on Azure), you need to re-publish the web application to reflect the page changes.
    Please let me know whether it works for you.
    Regards,
    Jeffrey
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can you update the ipad one to ios 6

    can you update the ipad 1 to ios 6 if not when can you?

    That iPad can only be updated to 5.1.1, and in all probability will never be able to be updated beyond that.
    (76608)

  • SPD 2013 - Copy Document action - how do you update the copied list item's metadata?

    SharePoint 2013 Designer no longer has the Copy List Item Action, it only has a Copy Document action. It seems that this action provides no way of saving the copied documents list item ID. How do you update the list item after it has been copied??
    Any help is appreciated.
    Greg Pierson

    Hi,
    According to your post, my understanding is that you wanted to copy the list item in SharePoint 2013.
    The Copy List Item is
    available only on the SharePoint 2010 Workflow platform, you can create a SharePoint 2010 workflow using the SharePoint 2010 workflow platform to achieve it.
    You can also use the Content and Structure to copy the list items: Site Settings->Site Administration->Content and Structure.
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

Maybe you are looking for

  • No sound in Imovie 11 after recording...

    Hello. I have Imovie 11 9.0.4. All of a sudden today no sound was recording when I was recording my video today. The mic detector on the voiceover icon shows full bars and records fine in other programs so I know it is not the mic. Any Ideas?

  • How to open an .indd file in commands

    does any one know how to open an .indd file in commands from a plugin(without opening from the normal procedure..File -> Open ...) in my plugin I tried,   SDKFileOpenChooser fileChooser; fileChooser.AddAllFiles(); fileChooser.ShowDialog();      It sh

  • Password protected file won't convert.

    I hi anyone?

  • How can i put FPM Buttons in custom FPM Views.

    Hi,   How can i put FPM Buttons in custom FPM Views.   Couldn't locate them in web dynpro layout or FPM Views and application in Portal Content. Thanks,

  • Forum Design

    Hi, I would like to design and implement the SDN forum kind of system. Please let me know how to design the forum system. Query:- 1) Data base is required to design form or web page? 2) How to use KM system for the forum? 3) where Trex play a role in