How does adobe encoder work with windows 8? I can't get it to work.

How does adobe encoder work with windows 8? I cant get it to work.

Flash Media Live Encoder doesn't work with Windows 8.
The best it gets is Windows 7 64 bit.

Similar Messages

2011 i7 Macbook Pro with Windows 7 SP1, can't get it to work

2.2 GHz Macbook Pro 2011 17 inch
OCZ Vertex 3
Mac OS X 10.6.8
2nd HD instead of optical drive
I bought a downloadable version of Windows 7 SP1 from Microsoft and burned it to a disk. I have tried probably 25 times to install via Bootcamp, but I always get a black screen with a blinking cursor. I went to an Office Depot in Mexico and bought a hard copy of Windows 7 and still have the same problem.
I have searched and it seems like you can't install Windows 7 on Bootcamp via external drive (have read it on multiple sites, but can't figure out why).
I just upgraded to Lion after reading that you can install a Windows iso on a USB Stick, but after looking on these forums, the FAQ says it will work on only certain models.... My question is, what models? I have tried searching, but have had zero results.

your burn is the first issue, common - reduced slowest 2x burn speed
3rd party superdrives also don't work and you need support driver
you need to disconnect the 2nd internal drive also

I currently have a PC with Windows Outlook. If I add an iPad to the mix, how does the iPad interface with Windows Outlook?

I currently have a PC with Windows Outlook. If I add an iPad to the mix, how does the iPad interface with Windows Outlook?

Isn't Outlook simply an email client or a software application on a computer? You can add an email account - whatever email provider that you use - right on the iPad. You can sync your Outlook contacts and calendar if that is what you are asking about, but Outlook itself has nothing to do with the iPad.
Message was edited by: Demo

I have signed up for adobe conversion to microsoft word and i can't get it to work - can you help me

I have signed up for adobe conversion to microsoft word and I can not get it to work - can you help me?

Hi Mike,
I've checked your account. I see that you just purchased the subscription this morning. The order is still pending processing, which is why you haven't yet been able to log in an use your subscription. It can take 24-48 hours for a subscription to process fully. Once it does, you'll be able to log in and convert files.
I apologize for the inconvenience.
Best,
Sara

TS1424 Just got a new computer with Windows 8. Can't get Itunes to download. Checked with clerk at Sam's Club who said that was her experience as well.

Just got a new computer with Windows 8. Can't get Itunes to install. Checked with a clerk at Sam's Club who said it wouldn't install for her either.
What do I need to do. Sent an email to Apple; but just got a computer generated response with no helpful advice.

Do you get an error message when you try to install iTunes? If so, what does it say? (Precise text, please.)

WPS54GU2 printing to parallel printer with Windows 7 64-bit-cannot get it to work for the life of me

Hello,
I am having the worst difficulties getting the WPS54GU2 to print to a HP Laserjet 4L printer. I know that the general communication is working as I am able to print a test page from the
I have the IP address correct for the print server (in my case it is 192.168.1.103) and is set statically in the print server setup.
I have it working fine on an XP box The port name configured on the XP machine is LK89A0B5_P1.
The software that comes with the WPS print server will not install on Windows 7 so the address/port/queue must
be set up manually.
I have tried the link from Cisco's KB that shows how to configure the print sever:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=69efd80e2ea44d948fea2365d3e0c9eb_Configuring_TCP_I...
however this does not work and the print job either gets stuck in the print queue, or it shows busy/error in the print queue.
I have also tried suggestions on this forum that say not to create a TCP/IP port but instead use LPR port.
Can someone please give me the solution that will work. I have heard people say to use L1 for the queue name, or P1, or LP1
or lp1. I cannot spend much more time on this before I give up and look for a different print server that will work with both parallel and USB printers.
Thanks for help/suggestions on this.
Mike

sometimes it needs the device- specific drivers to get it to work; especially that you have a 64- bit OS.
the print server is already connected to the network, right? what is its IP address? check if the computer can ping that IP by going to start> search> cmd> ping 192.168.1.78 (change this to the correct IP address). if your computer can ping the print server then you can setup LPR printing to get your printing jobs done. click on the link below for more info.
Setting up LPR Printing on Windows 7

I need help with ISIGHT! I can't get it to work with MSN!

HI,
My issue is this... I have AIM/AOL and I am able to see myself on webcam.. however noone else can unless they HAVE a webcam... My first question is- "DO you have to have a WEBCAM on both ends for both people to see you?" Does the person I am chatting with HAVE to have a webcam to see me? If so WHY? They should atleast be able to see ME if I want them to... Also if they are using windows for PC platform... can they use a pc webcam and still connect with me through my isight although I am on a mac?
My second major ISSUE is.. WHY is the isight only compatible with AOL/AIM? I was told when I bought this it would be compatible with MSN Messenger for windows AND the MAC version... I have both and the isight does not show up on it... CAN ISIGHT be connected to msn messenger for MAC??? PLEASE help me!
I called APPLE tech support and they couldn't even help me! They told me to call Microsoft! Anyhow- one guy did say he was able to get his ISIGHT working with the MSN messenger for MAC platform.. do you have ANY idea how to do that?? The thing is ALL my freinds are on PC's and have MSN messenger..
ALSO- someone on mac rumors told me to look for a guy names RALPH! Said you know A LOT about mac and pc compatibility! PLEASE HELP
Bottom line - I want to use isight with msn so my msn pc friends can share webcam... I also have virtual pc software... is it easier to just get a pc webcam and do it through there? ( i tried that and it didn't work either) i need major TECH SUPPORT!
THANK YOU

Microsoft's Messenger for Mac (MSN) does not support webcams at all.
I have found the best alternative to MSN to be aMSN with macam for the webcam driver (it is a cheap usb webcam). Both are free open source projects. I guess if you use an iSight you will not need macam.
aMSN can be found here: http://amsn.sourceforge.net/
macam can be found here: http://webcam-osx.sourceforge.net/
The speed is substantially faster and it is far more stable than Mercury in my experience.
The only difficulty is the camera is often shown as being "in use by another application". To counter this I start macam, then plug in the camera (or unplug and plug back in). Then I start aMSN.

BT Home Hub - Airport Express - Windows Vista : I can't get it to work!!

Hi, I am running Windows Vista, with the BT Home Hub connected via Ethernet. I want to wirelessly connect to my airport express to stream music to the hifi. But, my airport express client is NEVER found via wirless, but is via ethernet, which defies the point of having it.
Has anyone ever got this to work,and can let me know how?
Thanks!

Here's how to connect to you Airport Express via wireless from Vista I'm just pasting it in as I'm not going to re-type the whole thing, so pardon if it's slightly off-topic in spots. Though I guess it won't help you if you're having problems in iTunes as it's known to not work properly most of the time...I haven't ventured that far as I've read it's somewhat fruitless.
I was just playing with this in Vista Ultimate to hookup a printer we have installed on an Airport Express. Here's what I did to get it to work:
Just to make sure all went as smoothly as possible I ran the Airport utility installer as administrator (not sure if it was necessary but worked fine). I then ran the utility from the start menu and achieved the same results as you (no base stations show up) and even turned off Windows firewall completely to make sure it wasn't causing problems (it asked for permission to give access upon first run).
But to solve the problem I then used the "Other..." button located next to the "Re-scan" button and input the IP address and password of the Airport Express manually. This did the trick and I could connect to the Express and see the config screen. As this was already configured for our network I didn't really change anything but I don't see any problems with doing so and updating the settings from Vista once you are connected to the config screen.
(skip the rest of this if all you needed was to connect the Admin utility)
To install my particular printer (a Konica-Minolta laser) I had to connect it locally to my notebook first, let Vista find the updated drivers online (worked fine!!) and then had to add a new port in the printers properties screens by creating a new standard TCP/IP port and just using the IP of the Express. I then selected that as the printers port instead of the USB one, turned off bi-directional support (REQUIRED!!!!) and printed a test page. All worked great. Note I had to do this whole local hook-up then change ports stuff (and more if I remember correctly) for XP too.
Hope this helps. At least until they update the Admin utility (and iTunes please!!!!) to work within Vista.
Other OS MS Vista Ultimate

Adobe flash player stopped working 10.5.8.. can not get it to work anymore

My flash player has not worked for 2 days, i can view some things on Youtube but with no sound so i tried to update my flash player and it doesn't supprt my mac os x version 10.5.8... anyone know what i can do next... Spent over a thousand euro on this under 3 years ago and now it's telling me it's too old! Aghhh help!

It isn't the MacBook that's too old it's the Operating System. Mac OS 10.5 Leopard became obsolete in July of 2009, that's 4 years ago. Companies like Adobe, Google, Firefox, etc.. no longer support anything less than 10.6.
First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard.
The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion.
The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.

I'm working with dual monitors but can't get it to boot up on my main screen, so all my icons get messed up

Hey all,
So I have a Mac Pro at work and it's connected to a 30" monitor and a smaller monitor. I have the larger one set as the primary screen, but when the computer boots it always uses the smaller monitor as the primary, load all my icon on the smaller monitor, then finally swaps everything to the larger monitor. This messes up all my icons on my desktop since they go from placment on a smaller screen then back to the larger one.
Is there any way to force the mac to boot up with the larger monitor? Or not screw up all my icons?

Yes.
A previous attempt was made through my home network, but after much name-calling at the tech support (dude wasn't listening to me) for the print server I bought (which SAYS they work with Mac... such BS), I gave up on that and hooked it back up to the PC. it worked fine. ButI want it to work with the Mac. It should be able to.
So, now it's hooked up, via USB, directly to the Mac. I love this MF printer... it's the one one I could find a the time that did everything I wanted... and I wouldn't go back to HP, even if they paid me. (that's what I had before)
Thanks
A.
iMac G5 Mac OS X (10.4.10)

TS1424 I have an HP Elite Book 2540p with Windows XP and can not get the iTuneStore on line. I keep getting a message that says I don't have an internet connect, but I am connected. Any suggestions?

I can not get iTunes Store on line. I keep getting a message that says I am not connected to the internet, but I know I am. I have to connect from three locations with the same results. Any suggestions?

Hello bigblue8
Check out the following articles for troubleshooting access to the iTunes Store. The first one will probably get you started enough to get it taken care of. If it does not the follow up article should definitely solve it for you.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Can anyone confirm this adapter works with micro sd card, can anyone confirm this adapter works with micro SD card

hi all,
I would appreciate if anyone could confirm whether this adapter will work with a micro SD card? I have the adapter that converts the micro SD to normal SD, so would this adapter work:
http://store.apple.com/us/product/MC531ZM/A/apple-ipad-camera-connection-kit#ove rview
thanks very much

i have a helmet camera that records videos and i have been told my the manufacturers that this will work for that too?

HT5517 My daughters phone works on airplay but I can't get mine to work

Just bought Apple TV, and can't get my iPhone 5 c to mirror. My daughter has tried and it works on her phone but but not on mine or my iPad. Please help. My wife has tried her iPhone and she can't mirror either

http://support.apple.com/kb/ht5209
more guides
set up airplay on iphone 5c

How does adobe apps looks with the new retina display macbook?

I'ver heard that it gets so blurry that you cant even read the text. I use adobe creative suite 6 production premium. does the video inside apps like adobe after effect play in "retina" quality? is there anything I can do to make it not blurry if it will look blurry?

I frequent the CS6 forums - particularly Photoshop - and most users are quite happy using CS6 products on MBP-R using the 'best for Retina resolution option. I have yet to hear someone say that they apps are unusable, etc. People are just waiting for Adobe to announce Photoshop for Retina display, as shown at the June Apple WWDC.
There's really nothing out there to replace the CS6 apps with - I think that you'll be fine with them. If you're anxious about it, just don't buy the Retina - buy a 2012 MBP with the HD anti-glare screen.
I assume that it will be several years before applications are updated for Retina - if at all.
Check out some of the CS6 Adobe forums to read what MBP-R owners have to say - I've not read that many complaints.
Clinton

Does iWork 09 not work with Lion? I can't get pages to open any docs.

Helps?

If you actually want an answer it will help if you give us some details to work on.
Menu > Pages > About Pages
What version does it say?
To upgrade:
Menu > Apple > System Preferences > System > Software Update
Exactly what docs are you talking about anyway?
What is the extension on the files?
What happens when you try to open them?
How have you tried to open them?
Have you tried dragging them onto the Pages icon?
Peter

How does adobe encoder work with windows 8? I can't get it to work.

Similar Messages

Maybe you are looking for