How does B2B Adapter for Inbound operation for SOA Composite works

Hai,
I am new to B2B. can any one share samples or links or doc's on B2B Adapter for inbound operation (receive)?
Can any one share B2B inbound channel configuration ?

1. How does the above can be achieved using JMS protocol?Where would you like to pitch-in JMS? You want to receive inbound message at B2B over JMS or between SOA and B2B, you want to use JMS?
For receiving inbound message at B2B over JMS, please create a non-internal listening channel at B2B. Make sure to set JMS headers -
http://docs.oracle.com/cd/E23943_01/user.1111/e10229/app_interface.htm#CACDFEAE
For using JMS between, SOA and B2B, create a JMS channel in Host TP profile and add it in the inbound agreement (for inbound scenario). For outbound scenario, create an internal listening channel and make sure that from back-end, headers mentioned on above link, are being set.
2. Will SOA Composite having B2B Adapter receive operation has first operation can get triggered automatically or not as soon as EDI----->XML message is found?Yes, it can be triggered. Provided the steps in your another thread.
3. will B2B Adapter receive operation in SOA Composite will take EDI--------> xml msg as opaque?No, if while modelling B2B adapter, you selected a doc-def otherwise yes.
Regards,
Anuj

Similar Messages

  • Custom Adapter for Inbound Operations never invoked

    Hi,
    I created a custom J2CA Resource Adapter for Inbound operations. I implemented javax.resource.spi.ResourceAdapter interface with all required methods - start(BootstrapContext), endpointActivation(MessageEndpointFactory, ActivationSpec), etc.
    I created the appropriate WSDL file according Adapter Development Cookbook. Below is an excerpt from it:
    <definitions targetNamespace="urn:Adapter" .......>
      <message name="Notification">
        <part name="Notification_Part" element="ns1:Svc"/>
      </message>
      <message name="Header">
        <part name="Header_Part" element="ServiceHeader"/>
      </message>
      <portType name="EventsQueue_ptt">
        <operation name="Dequeue">
          <input message="tns:Notification"/>
        </operation>
      </portType>
      <binding name="NotificationService" type="tns:EventsQueue_ptt">
        <jca:binding/>
        <operation name="Dequeue">
          <jca:operation ActivationSpec="acme.ActivationSpec"/>
          <input>
            <jca:header message="tns:Header" part="Header_Part"/>
          </input>
        </operation>
      </binding>
      <service name="EventsQueue">
        <port name="EventsQueue_pt" binding="tns:NotificationService">
          <jca:address ResourceAdapter="acme.AdapterClass"/>
        </port>
      </service>
    </definitions>I created a BPEL process with a partner link based on this WSDL and linked a Receive activity with it. According Adapter Concepts Guide here is what should happen when the BPEL process is deployed and started:
    - The ResourceAdapter class name and the ActivationSpec parameter are captured in the WSDL extension section of the J2CA inbound interaction WSDL Adapter Integration with BPEL Process Manager Adapter Integration with Oracle Application Server Components 5-7 during design time and made available to BPEL Process Manager and Adapter Framework during run time.
    - An instance of the J2CA 1.5 ResourceAdapter class is created and the Start method of the J2CA ResourceAdapter class is called.
    - Each inbound interaction operation referenced by the BPEL Process Manager processes results in invoking the EndPointActivation method of the J2CA 1.5 ResourceAdapter instance. Adapter Framework creates the ActivationSpec class (Java Bean) based on the ActivationSpec details present in the WSDL extension section of the J2CA inbound interaction and activates the endpoint of the J2CA 1.5 resource adapter.
    The problem is that start(BootstrapContext) and endpointActivation(MessageEndpointFactory, ActivationSpec) seem never to be invoked, the adapter is never initialized and at some point the Receive activity of the BPEL process times-out.
    I put some debug System.out.println statements in these methods, but nothing appeared in the server log.
    I'm using Oracle SOA Suite 10.1.3.1.
    I will be grateful for any suggestions.
    Regards,
    Simeon
    Message was edited by:
    skirov

    user9116351 wrote:
    Hi,
    I have written a custom connector for crud operations to a table in Oracle DB. The custom code class uses oracle.jdbc.OracleDriver which is present in ojdbc14.jar. I have placed this jar in ThirdParty folder of the OIM installation but I am still getting an SQLException while connecting to the DB as my custom code is unable to find the required class. Can someone guide me to some documentation that will help me get over this?
    Thanks,
    SaieshWhich version of OIM you are in? Also you dont need to copy ojdbc14.jar as this exists already in OIM.

  • How does B2B in SOA SUite 11g identify sender/receiver of inbound document?

    Hi All,
    I am checking basic B2B features - custom document protocol. I have defined docuement definition, trading partner, agreement, channels as per guide. When I copy (manually) a sample xml payload (complaint to definition xsd and identification expression), it gives error as the sender could not be identified (receiver is taken as the host as I am putting the file over host's listening channel).
    So question is - how does B2B identify sender, receiver and match the incoming message payload to identify the agreement?
    Thanks in advance.
    regards, sibendu

    Hi Sibendu,
    First of all, let me direct you to the right forum, Oracle Integration B2B forum - Integration - B2B
    Now coming to your question,
    how does B2B identify sender, receiver and match the incoming message payload to identify the agreement?For each and every document, exchange and transport protocol there are certain fields (generally message headers) on the basis of which B2B identifies the sender and receiver. As far as identifying the incoming message payload is concerned, in each and every document definition we define some UNIQUE selection criteria to identify a document. For XML documents, it is the X-Path of some node(and/or it's value) and for non-xml documents, it is the start and end position of some element (and/or it's value) in the document.
    You may get faster and better answer in Oracle B2B forum, for the questions related to Oracle B2B (10g/11g).
    Regards,
    Anuj

  • How does one change the font size for folders and/or file lists in the Bookmarks Library?

    How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
    Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
    As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
    With regard to font size,
    1. there is no “Edit Bookmarks” or like option to edit the list in this version
    2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
    3. expanding the browser window has no effect on font size
    4. “Preferences” settings for font size has no effect in that window either, including advanced settings
    5. “Help” offers none that I can find.
    Can any of you Help?!?

    Maybe this extension helps:
    *Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

  • How does one define a default style for a custom Flex component?

    How does one define a default style for a custom Flex component?
    hello
    I created a new set of Flex component library slib.swc (Flex 4.5). Would also like to have a default style. defaults.css file, making it the default style of the component library.
    Like flex the builder install directory of sdks \ 4.5.0 \ frameworks out \ libs directory has a spark.swc file, open with Winrar will see defaults.css this file. Defaults.css file defines the default style of the flex spark components.
    How can it be achieved?
    As follows
    slib.swc contains a CLabelEx components, and a defaults.css file
    defaults.css source file as follows:
    @ namespace s "library :/ / ns.adobe.com / flex / spark";
    @ namespace mx "library :/ / ns.adobe.com / flex / mx";
    @ namespace cn "http://os.slib.cn";
    cn | CLabelEx
            styBackgroundAlpha: 1;
            styBackgroundColor: # 569CC0;
            styBorderAlpha: 1;
            styBorderColor: # 569CC0;
            styBorderWeight: 1;
            styCornerRadius: 3;
    In slib.swc the application MyLabel.mxml of the source file as follows:
    <? xml version = "1.0" encoding = "utf-8"?>
    <s: Application, the xmlns: fx = "http://ns.adobe.com/mxml/2009
                               xmlns: s = "library :/ / ns.adobe.com / flex / spark"
                               xmlns: mx = "library :/ / ns.adobe.com / flex / mx"
                               xmlns: cn = "http://os.slib.cn
                               the minWidth = "955" The minHeight = "600">
            <fxeclarations>
            </ fxeclarations>
            <cn:CLabelEx x="67" y="112"/>
    </ s: Application>
    I hope CLabelEx default use cn | CLabelEx, style to display its appearance.
    I refer to above approach, but failed to achieve. Can you please re-Detailed
    Thanks!

    dj is right. Any Folder can be a picture folder.
    Create a root level folder and add it to your Pictures Library in Windows.  It will show up with all the scattered pictures from other programs. It can even be a different dirve if you like.  You  can even specify one to be the default save location for pictures in this dialog.
    Navigate to Pictures in your Libraries in Windows Explorer Right Click and select Properties.
    Message was edited by: Rikk Flohr forgot the instructions...

  • How does RFC adapter with EO/EOIO work? Kindly help!

    Hi Experts,
            How does a sender or receiver RFC adapter works when QOS is EO or EOIO (Async)? In other words, for EOIO, are the messages are queued? How does this queueing work? Does it use FIFO logic? where do we specify the max limit of messages that can be queued?
    Also what is the significance of 'Initial connection' and 'maximum connections' in communication channel? I have given the default value 1 for both. What should be the ideal value and why?
    In my Async RFC - XI scenario sometimes XI is able to receive the messages but sometimes it doesnot even though the sender system is UP and running.
    I cannot see any messages in SXMB_MONI even though the sender has sent the messade.
    Why RFC adapter is behaving like this? What could be the issue?
    Kindly help!

    EOIO: How does this queueing work? Does it use FIFO logic?
    >> yes it uses FIFO logic in EOIO.
    Also what is the significance of 'Initial connection' and 'maximum connections' in communication channel? I have given the default value 1 for both. What should be the ideal value and why?
    >>>noof rfc connections we are using for connecting to XI to RFC minmum is 1 maximum is 50 bydefault. you increase this value by changing the default setting.
    How does RFC adapter with EO/EOIO work? Kindly help!
    Posted: Mar 21, 2007 4:15 AM 
    Hi Experts,
    How does a sender or receiver RFC adapter works when QOS is EO or EOIO (Async)? In other words, for EOIO, are the messages are queued? How does this queueing work? Does it use FIFO logic? where do we specify the max limit of messages that can be queued?
    Also what is the significance of 'Initial connection' and 'maximum connections' in communication channel? I have given the default value 1 for both. What should be the ideal value and why?
    Why RFC adapter is behaving like this? What could be the issue?
    >>check ur sender RFC adapter. chekc whether data is sent from RFC . see logs in R/3.

  • How does JDBC adapter reads or writes the data to DB

    Hi All,
             How does JDBC adapter read the data from a db, is it that it collects all the data in one go and sends to XI, or is it record by record.  And what if it writes to a db?
    Xier

    Hi,
    It collects all record at one time and while writing to DB you can push all data at one go...
    We are using receiver JDBC adapter to push data to DB and its one go..
    Nilesh

  • How does the CBO calculate the selectivity for range predicates on ROWID ?

    Hi all,
    I'm wondering how the CBO estimate the selectivity for range predicates based on ROWID columns.
    For example, for the following query the CBO estimates there's going to be 35004 rows returned instead of 7:
    SQL> SELECT count(*)
      FROM intsfi i
    WHERE
    ROWID>='AAADxyAAWAAHDLIAAB' AND ROWID<='AAADxyAAWAAHDLIAAH';  2    3    4
      COUNT(*)
             7
    Elapsed: 00:00:02.31
    SQL> select * from table(dbms_xplan.display_cursor(null,null,'iostats last'));
    PLAN_TABLE_OUTPUT
    SQL_ID  aqbdu2p2t6w0z, child number 1
    SELECT count(*)   FROM intsfi i  WHERE  ROWID>='AAADxyAAWAAHDLIAAB' AND
    ROWID<='AAADxyAAWAAHDLIAAH'
    Plan hash value: 1610739540
    | Id  | Operation             | Name    | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
    |   0 | SELECT STATEMENT      |         |      1 |        |      1 |00:00:02.31 |   68351 |
    |   1 |  SORT AGGREGATE       |         |      1 |      1 |      1 |00:00:02.31 |   68351 |
    |*  2 |   INDEX FAST FULL SCAN| INTSFI2 |      1 |  35004 |      7 |00:00:02.31 |   68351 |
    Predicate Information (identified by operation id):
       2 - filter((ROWID>='AAADxyAAWAAHDLIAAB' AND ROWID<='AAADxyAAWAAHDLIAAH'))According to Jonathan Lewis' book, for a normal column the selectivity would have been:
    (value_column1-value_column2)/(high_value-low_value)+1/num_distinct+1/num_distinct
    But here with the ROWID column, how does the CBO make its computation ?
    SINGLE TABLE ACCESS PATH
      Single Table Cardinality Estimation for INTSFI[I]
      Table: INTSFI  Alias: I
        Card: Original: 14001681.000000  Rounded: 35004  Computed: 35004.20  Non Adjusted: 35004.20

    Hi Jonathan,
    Some Clarifications
    =============
    DELETE /*+ ROWID(I) */ FROM INTSFI I WHERE
    (I.DAVAL<=TO_DATE('12032008','DDMMYYYY') AND (EXISTS(SELECT 1 FROM
    INTSFI S WHERE S.COINT=I.COINT AND S.NUCPT=I.NUCPT AND S.CTSIT=I.CTSIT
    AND NVL(S.RGCID,-1)=NVL(I.RGCID,-1) AND S.CODEV=I.CODEV AND
    S.COMAR=I.COMAR AND S.DAVAL>I.DAVAL) AND I.COMAR IN (SELECT P.COMAR
    FROM PURMAR P WHERE P.NUPUR=1))) AND ROWID>='AAADxyAAWAAHDLIAAB' AND
    ROWID<='AAADxyAAWAAHDLIAAH'
    Plan hash value: 1677274993
    | Id  | Operation                      | Name    | Starts | E-Rows | A-Rows |   A-Time   | Buffers |  OMem |  1Mem | Used-Mem |
    |   0 | DELETE STATEMENT               |         |      1 |        |      0 |00:00:05.94 |   53247 |    |          |          |
    |   1 |  DELETE                        | INTSFI  |      1 |        |      0 |00:00:05.94 |   53247 |    |          |          |
    |*  2 |   HASH JOIN SEMI               |         |      1 |   9226 |      7 |00:00:05.94 |   53180 |   783K|   783K|  471K (0)|
    |   3 |    NESTED LOOPS                |         |      1 |   9226 |      7 |00:00:00.01 |      10 |    |          |          |
    |*  4 |     TABLE ACCESS BY ROWID RANGE| INTSFI  |      1 |   9226 |      7 |00:00:00.01 |       6 |    |          |          |
    |*  5 |     INDEX UNIQUE SCAN          | PURMAR1 |      7 |      1 |      7 |00:00:00.01 |       4 |    |          |          |
    |   6 |    INDEX FAST FULL SCAN        | INTSFI1 |      1 |     14M|   7543K|00:00:01.73 |   53170 |    |          |          |
    Predicate Information (identified by operation id):
       2 - access("S"."COINT"="I"."COINT" AND "S"."NUCPT"="I"."NUCPT" AND "S"."CTSIT"="I"."CTSIT" AND
                  NVL("S"."RGCID",(-1))=NVL("I"."RGCID",(-1)) AND "S"."CODEV"="I"."CODEV" AND "S"."COMAR"="I"."COMAR")
           filter("S"."DAVAL">"I"."DAVAL")
       4 - access(ROWID>='AAADxyAAWAAHDLIAAB' AND ROWID<='AAADxyAAWAAHDLIAAH')
           filter("I"."DAVAL"<=TO_DATE(' 2008-03-12 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))
       5 - access("P"."NUPUR"=1 AND "I"."COMAR"="P"."COMAR")
    When I force the NESTED LOOP SEMI JOIN the query runs faster:
    DELETE /*+ ROWID(I) */ FROM INTSFI I WHERE
    (I.DAVAL<=TO_DATE('12032008','DDMMYYYY') AND (EXISTS(SELECT /*+ NL_SJ
    */ 1 FROM INTSFI S WHERE S.COINT=I.COINT AND S.NUCPT=I.NUCPT AND
    S.CTSIT=I.CTSIT AND NVL(S.RGCID,-1)=NVL(I.RGCID,-1) AND S.CODEV=I.CODEV
    AND S.COMAR=I.COMAR AND S.DAVAL>I.DAVAL) AND I.COMAR IN (SELECT P.COMAR
    FROM PURMAR P WHERE P.NUPUR=1))) AND ROWID>='AAADxyAAWAAHDLIAAB' AND
    ROWID<='AAADxyAAWAAHDLIAAH'
    Plan hash value: 2031485112
    | Id  | Operation                      | Name    | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
    |   0 | DELETE STATEMENT               |         |      1 |        |      0 |00:00:00.01 |      94 |
    |   1 |  DELETE                        | INTSFI  |      1 |        |      0 |00:00:00.01 |      94 |
    |   2 |   NESTED LOOPS SEMI            |         |      1 |   9226 |      7 |00:00:00.01 |      27 |
    |   3 |    NESTED LOOPS                |         |      1 |   9226 |      7 |00:00:00.01 |       9 |
    |*  4 |     TABLE ACCESS BY ROWID RANGE| INTSFI  |      1 |   9226 |      7 |00:00:00.01 |       5 |
    |*  5 |     INDEX UNIQUE SCAN          | PURMAR1 |      7 |      1 |      7 |00:00:00.01 |       4 |
    |*  6 |    INDEX RANGE SCAN            | INTSFI1 |      7 |     14M|      7 |00:00:00.01 |      18 |
    Predicate Information (identified by operation id):
       4 - access(ROWID>='AAADxyAAWAAHDLIAAB' AND ROWID<='AAADxyAAWAAHDLIAAH')
           filter("I"."DAVAL"<=TO_DATE(' 2008-03-12 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))
       5 - access("P"."NUPUR"=1 AND "I"."COMAR"="P"."COMAR")
       6 - access("S"."COINT"="I"."COINT" AND "S"."NUCPT"="I"."NUCPT" AND
                  "S"."CTSIT"="I"."CTSIT" AND "S"."CODEV"="I"."CODEV" AND "S"."COMAR"="I"."COMAR" AND
                  "S"."DAVAL">"I"."DAVAL")
           filter(NVL("S"."RGCID",(-1))=NVL("I"."RGCID",(-1)))the above post is from Ahmed AANGOUR
    Case 1 - . If you check Plan hash value: 16772749938
    =====
    TABLE ACCESS BY ROWID RANGE| INTSFI  For every row access from INTSFI - it fetches a record from INDEX UNIQUE SCAN | PURMAR1
    If we check A-rows = 9226
    9226 * 7 = 64582 request across the table - perhaps with hint of rowid it fetches exact rows from PURMAR1
    in this case i think going for hash join with ordered hints (jonathan as you suggest go for leading hint's instead of ordered) - from INTSFI - PURMAR1 - instead of going for IN clause would get the rows that satifies the ("P"."NUPUR"=1 AND "I"."COMAR"="P"."COMAR")
    |*  2 |   HASH JOIN SEMI               |         |      1 |   9226 |      7 |00:00:05.94 |   53180 |   783K|   783K|  471K (0)|
    |   3 |    NESTED LOOPS                |         |      1 |   9226 |      7 |00:00:00.01 |      10 |    |          |          |
    |*  4 |     TABLE ACCESS BY ROWID RANGE| INTSFI  |      1 |   9226 |      7 |00:00:00.01 |       6 |    |          |          |
    |*  5 |     INDEX UNIQUE SCAN          | PURMAR1 |      7 |      1 |      7 |00:00:00.01 |       4 |    |          |          |My understanding with above plan would change to
    HASH JOIN
    TABLE ACCESS BY ROWID RANGE| INTSFI
    INDEX UNIQUE SCAN | PURMAR1
    HASH JOIN
    INDEX FAST FULL SCAN | INTSFI1
    Which migt be feasible.
    2 .
    DELETE /*+ ROWID(I) */ FROM INTSFI I WHERE
    (I.DAVAL<=TO_DATE('12032008','DDMMYYYY') AND (EXISTS(SELECT /*+ NL_SJ
    */ 1 FROM INTSFI S WHERE S.COINT=I.COINT AND S.NUCPT=I.NUCPT AND
    S.CTSIT=I.CTSIT AND NVL(S.RGCID,-1)=NVL(I.RGCID,-1) AND S.CODEV=I.CODEV
    AND S.COMAR=I.COMAR AND S.DAVAL>I.DAVAL) AND I.COMAR IN (SELECT P.COMAR
    FROM PURMAR P WHERE P.NUPUR=1))) AND ROWID>='AAADxyAAWAAHDLIAAB' AND
    ROWID<='AAADxyAAWAAHDLIAAH'Ahmed AANGOUR, modified the query by /*+ NL_SJ */ hint, Instead of that in to remove the most of the rows as we join the tables using subquery, I still doubt it
    to go push_predicate hints - still doubt it.
    Jonathan your comments are most valuable in the above two cases..
    Looking forward to calrify my understanding with concepts of indexes for above test cases
    - Pavan Kumar N

  • How does the "Windows 10 is free for its 1st year" offering affect licensing for enterprise customers paying Software Assurance?

    At the keynote on 21 January 2015, there was an announcement that Windows 10 was going to be a free upgrade for the first year of its release.
    As an enterprise customer,  I'd like to know about the impact of this announcement on Software Assurance. How is the cost of Windows changing for the enterprise?

    On Thu, 22 Jan 2015 15:25:03 +0000, colakid wrote:
    To sum it up SUBSCRIPTION FEE. for each computer in your enterprise this make more sense then what we have seen in the years. In sales we are starting to see free one year software, that requires to sign up for that free one year use, I am certain this
    is the case. I am entitled my opinion.
    You are entitled to your opinion, that doesn't make it correct.
    Personally, I'll go with Ed Bott since he has a much closer relationship
    with Microsoft than you do:
    http://www.zdnet.com/article/windows-10-whats-there-whats-missing/
    "One thing's for certain: you won't have to pay Microsoft an additional
    license fee. Microsoft's business model isn't changing. The upgrade is a
    perpetual license that's good for the supported life of the PC, and there's
    no plan at this time to offer Windows as a subscription."
    Paul Adare - FIM CM MVP
    Emacs is a nice operating system, but I prefer UNIX. - Tom Christiansen

  • How does sap do the material determination for IDOC/EDI?

    how SAP do the material determination for inbound PO?
    If customer send in their material# or UPC code or buyer material#, what is the order of material determination?
    PO1*7CA**UN005650060211VN41112IN515734µ

    Hi Samuel,
    If the customer sends in their material number this need to be mapped with the value '001' to the field E1EDP19-QUALF and the material number mapped with E1EDP19-IDTNR.
    This value is referenced with the CMIR ( Customer material info record) and the vendor's material number is determined which would be used to create the sales order from the inbound PO.
    As Such the order of the material determination is depends upon the order it appears in the IDOC.That means the mapping done at the EDI subsystem determines the order of the E1EDP19 segments.
    Common practice in EDI inbound P.O scenario,customers send their material number and the vendor material number is determined from the KNMT table.To find the unique material number we need to supply the sales area details as well.
    I hope this is answered your question.
    Feel free to get back to me if you have any questions.
    Thank you.
    Regards,
    Karun.M

  • How does one give out enough spaces for a column in SQL report ?

    How does one reserve enough spaces for a column in SQL report ?
    Ex: 2 columns defined as the following
    projectNo varchar2(10)
    ProjectName varchar2(50)
    When create an sql report, the report heading will show below. If my project name is " Tire Strength Test At Site R987654" . I need to get it to show in one line since it was defined as varchar2(50)
    projectNo     ProjectName
    A0001         Tire Strength
                  Test At Site
                  R987654 There got to be a way to get around here . Thanx in advance.
    tai

    I noticed the CSS Style settings only seem to work if using a "Standard Report Column". Unfortunately I have the need to define some report columns where undesired wrapping occurs as "Display as Text (based on LOV, does not save state)" and tried to avoid wrapping, but no luck - is there a way around this (other than performing the report query using a huge DECODE clause, which somewhat renders the LOV useless except for data entry)?
    Thanks in advance for any ideas,
    Holger

  • How does songs from ipad become available for use on your iphone?, how does songs from ipad become available for use on your iphone?

    How does songs on my ipad become available for my iphone

    Get the mini 2 when the prices come down. The mini 2 is baically a smaller iPad Air. The improvements over the mini are well worth the money.
    http://www.apple.com/ipad/compare/#comparison-chart

  • How does iTunes Genius handle two libraries for the same user?

    I've been reading lately about how iTunes Genius should work. To my understanding, one of its basic principles, is absorbing usage data from users in order to create a database consisting of as much information possible. I don't expect a detailed explanation about the algorithms here. I know Apple doesn't share that kind of information (for obvious reasons) and I doubt I'd be able to understand much of it anyway. What I would like to know, though, in general terms, is how does this mechanism handle an instance like mine, where I use my Apple ID on two computers - one at home, another at work. That way, I have all my songs on both computers, so I can listen to them in either location. Obviously, each such library produces different usage data.
    Thanks in advance for any information, as I'm quite curious about it.

    Dear Fateh,
    Thanks for the reply.
    The features of this plugin are:
    Configurable timeout actions including alert, redirect, and logout
    Optional and configurable warning message
    Option to keep session alive if user isn’t truly idle. Special thanks to Martin D’Souza for a great idea on how to implement this feature.
    But it cannot stop a new session for a user, if there is an active (in my definition apex_workspace_activity_log.seconds_ago<240) session already running for that user.
    Regards,
    Deepika.

  • UMS adapter configuration for inbound email in SOA 11g

    Hi,
    Greetings to SOA Gurus !!!
    Our requirement is to invoke BPEL process on receipt of an email.
    We have configured the UMS email driver and setup the incoming server settings.
    When a mail is sent to the configured email address, I can see that the email is received successfully in the soa server logs.
    The problem i'm facing is probably with the UMS adapter settings in the BPEL. Configured the UMS adapter to poll this email address , but this is not happening.
    PFB the .jca file :
    <adapter-config name="AtRemote_UMS_Mail_Receive" adapter="UMS Adapter"
    wsdlLocation="AtRemote_UMS_Mail_Receive.wsdl"
    xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">;
    <connection-factory location="eis/ums/UMSAdapterInbound"/>
    <endpoint-activation portType="ReceiveNotification_ptt"
    operation="ReceiveNotification">
    <activation-spec className="oracle.tip.adapter.ums.inbound.UmsActivationSpec">
    <property name="ConsumeMode" value="listener"/>
    <property name="InboundThreadCount" value="1"/>
    <property name="DeliveryType" value="Email"/>
    <property name="To" value="[email protected]"/>
    </activation-spec>
    </endpoint-activation>
    </adapter-config>
    Any pointers on this would be of great help.
    Thanks,
    Saravana

    Hi Saravana
    Have you tried : http://technology.amis.nl/2012/05/18/proces-email-with-the-new-ums-adapter-of-soa-suite-ps5/ ?
    Regards
    A

  • The FTP protocol: How does the AE manage inbound packets?

    I've noticed the following with resect to how the AE handles NAT port forwarding for the FTP protocol.
    1. Forwarding for FTP service seems to only work if the WAN port is 21, e.g. map 21 -> 21 works, 2121 -> 21, does not work (packets seem to be dropped at the AE). However, such a restriction hold with other services such like ssh or openvpn.
    2. When ftp packets are received by the LAN server, they have the IP of the client stripped and arrive at the server with the WAN IP assigned to the AE, as indicated by the logs. Again, other services that we are forwarding to the server arrive with the correct client IP. So this is only an FTP thing.
    The AE seems to do some analysis of incoming packets and treat them differently. One question:
    Why does the Airport Extreme do this, and apparently only for FTP packets?

    I found a workaround by changing the port my FTP server listens to from 21 to 2121. I then set the AE to forward port 21 on the WAN side to 2121 on the LAN side. This allows the server to know what IP the client is connecting from.
    I'm still curious why the AE strips the client's IP when you forward to port 21 on the LAN side.

Maybe you are looking for

  • Withholding tax base amount

    Hi, I have 2 withholding taxes for a vendor but I only want one of them to be picked up for related transaction. But I encounter is, the system calculate withholding tax for both taxes. Please advice how can I choose one of them for a transaction. Th

  • Need to Merge Excel Spreadsheet data with Word Disposition Sheet

    I work for a Medical Devices manufacturer, and in order to keep track of our failures, we enter data into an Excel Spreadsheet and then print out a Disposition form containing similar information, which then gets attached to the Device folder. I woul

  • Report of all Installed Updates

    Hello, Is there a report for seeing a list of all installed updates? What I would really like is a report of all installed updates on all computers within a collection. We have had a lot of problems recently with Surface Pro's not restarting and losi

  • Syncing IE11 favourites bar TO my iPad Air

    How do I sync the IE11 Favourites Bar TO my iPad Air. When I do this, I only seem able to sync FROM the iPad and this overwrites the existing Favourites Bar on IE. I have the Favourites set up as I want them on IE11, but when I sync the iPad, they ar

  • PI 7.1 Installation on MSCS Cluster

    Hi Sapers,                      I'm In the middle of Installation of PI 7.1 on MSCS Cluster                      My Problem is while Installing In Node A I have chosen for Host Agent and SAPOSCOL a Shared Drive(G:) which                      Should a