How does CiscoWorks LMS 4.0.1 count faults to display at the top of the portal?

Hi,
just a little niggle I'm hoping someone might have the answer for. In my shiny new LMS 4.0.1 portal I'm looking at the fault count at the top of the screen. This doesn't match what DFM shows me as the number of active faults. I attach screenshots to show - I've got no active warnings on the system but the portal view shows 46. Can anyone tell me what it is counting?
regards,
Aaron

Hi Joe,
thanks for the reply - helpful as ever. After reading the document on reinitialising the DfmEpm database I have two further questions:
1) Should I reintialise all three Dfm databases as the document suggests?
2) Am I going to lose all the modifications I have made to monitoring of individual devices? I've spent days disabling GLBP interface monitoring since LMS can't support that and I'd much rather the count be wrong than do that again.
regards,
Aaron

Similar Messages

  • HT1343 if one is using windows 8.1 on a boot camped mac and you are using a mac keyboard . How does one unlock the numbers  on the larger wired keyboard ( numbers keys to the right of the keyboard) instead of having to use the numbers at the top of the ke

    Question: I am using a mac , wired Keyboard, on  a windows 8.1 platform ( this is because I have boot camped my hard drive) Unfortunately when I change over from my mac set up into the windows 8.1 the key board does not behave like it does when I am using as a mac. The numbers , on the right of the keyboard , no longer function and I have to use the numbers at the top of the keyboard, very annoying. Can anybody let me know how I unlock the numbers on the right of my keyboard?
    Regards CM

    I have stated every issue I’ve had so far in a fairly clear and concise way. I think if you read what I wrote, it all makes logical sense as to what is going on. Windows 7/8 would work just as well on a Mac if it was supported the same way the OS is for other OEMs.
    As I stated earlier in the post, I’m having these same issues in windows 8, not just 8.1, which is the reason for the post. I know the difference between supported by drivers and not supported by the manufacturer. The fact that when Haswell mbp’s came out and no revision to bootcamp for the new hardware was released to fix issues with installing windows on the new hardware shows Apple clearly Is not supporting bootcamp as strongly as they advertise.
    I am being realistic on Apple having drivers early. Anyone with an MSDN subscription can download the RELEASE version of windows months ahead of the actual release, I’m 100% sure if any average consumer can do that by paying $100 and saying they are a developer, apple can do it just as easily.
    You aren’t much help, you haven’t answered really anything to my post, nor have you contributed any knowledge that wasn’t clearly posted above, so don’t say anything if you don’t have anything to contribute.
    By the way, my rant is directed at apple, as you can see because I am saying “Apple, if you are going to…” because this is an Apple forum on Apple’s website. It is not directed to end users, clearly.

  • I was using my notes earlier today and now for some reason they are all gone. How does this happen and is there anything I can do to get them back, the new ones also that haven't been synced.

    I was using my notes earlier today and now for some reason they are all gone. How does this happen and is there anything I can do to get them back, the new ones also that haven't been synced.

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • On my IPhone 5s, there is a symbol at the top of the screen and it looks like a circle with a lock inside. What does it mean and how do I remove it?

    On my IPhone 5s, there is a symbol at the top of the screen and it looks like a circle with a lock inside. What does it mean and how do I remove it?

    You mean the Control Center.  As was said ...slide up with your thumb from the home button and a gray box should open (i.e. Control Center).  There you can turn the orientation lock Off or On.  You can also use the Flashlight or turn Bluetooth on or off, and other functions.

  • HT4211 Does any one know why my air play tv icon is missing from the recents bar.. It is now on the top of the screen when I press the home button twice. How do I get it back on the bottom recents bar

    Does anyone know why the airplay TV icon has moved from the recents bar, mine has now gone to the top of the screen. How do I get it back to the recents bar?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom

  • Does anyone know about how to get the blue light @ the top of the left corner of the Samsung Galazy 3 to quit flashing continuously?

    Does anyone know about how to get the blue light @ the top of the left corner of the Samsung Galazy 3 to quit flashing continuously?

    It would appear you have some sort of notification set up and have yet to look at the app which is sending the notification to the phone.
    You would have to first determine which app is sending the notification and then change the settings in that app to disable notifications if you no longer want to be alerted by that app.

  • I downloaded a program to be able to open docx diles and now every time I try to open one there are endless new tabs that read "new Tab" scrollomig across the top of the screen. How do I make it stop?

    I had an old version of office so I tried to install a free download that will allow me to open docx files. Now when I try to open one and endless stream of tabs that say "New Tab" scrolls across the top of the page. How do I make it stop. I already went and got office 2010 but it is still doing it. It does not do it if I use Internet Exployer for the browser.

    See [[Firefox keeps opening many tabs or windows]]

  • How can I get my Albums back at the top of the Library Panel?

    I recently upgraded to 3.3.2 and among the many new and sublty annoying features, all the smart albums which I created and which used to be at the top of the Library panel now appear at the bottom below the Projects.
    Why someone thought this should be moved is beyond me... and I am hoping there is a way for me to bring it back to the top.
    In some of my Aperture libraries I have literally hundreds of projects and rely on smart albums to quickly organize photos across them. Having to scroll to the bottom of the pane is a pain!
    Does anyone know how I can bring the ALBUMS back to the top of the Library pane?

    Create a folder (new Folder), call it "My albums" or similar, and drag it to the top of your projects section in the Library Inspector panel.
    Then drag all your albums there.
    You will have to set the projects to be arranged manually, or let the name of this folder start with a character that bring it to the top, if you want to sort by name.
    Regards
    Léonie

  • How to create an MenuBar that stays at the top of the browser windows?

    We are trying to develop a screen in WDA. It has a menu (UI element MenuBar) at the top. Based on the menu selection it calls a WDA to display below the menu. The requirement is to have the menu bar be stationary. The bottom container (TransparentContainer) with the WDA object is allowed to scroll, but the menu on top should not move. The scrolling should be dynamic based on the browser window. The bottom WDA can have more data then can fit on the screen.
    How can we make the menu stationary and the called WDA scrollable? The scroll bars should automatically update due to different browser window sizes.

    Hi,
    Thanks for your response. Our system is functioning on SAP Ver. 7.00, Service Pack 16. I do not know when or if we will be getting the upgrade to 7.01 or 7.02.
    As far as separating the menu and the actual view, each menu selection leads to the loading of a different WDA view inside the TransparentContainer by dynamically linking the ViewContainerUIElement to different WDA views. The trouble here is that when the View becomes too large, we will have to scroll off to the right or down to see additional content. This results in the menu not being accessible unless we scroll back. The requirement is to have the menu stay at the top of the page no matter how the user scrolls through the secondary view container below the MenuBar element.
    So far our best solution was to place an arbitrary pixel size to the TransparentContainer of the view, generating in-window scroll bars for the menu-controlled view. The MenuBar always stays visible because it is on top of the scrollable container. However, with varying screen sizes, set-pixel-size is not an ideal solution. I am hoping that there is a more elegant solution than set pixel size since % does not work with height size setting.
    Are there any ways to achieve this via 7.00 layout settings? Or perhaps a method to detect browser window size? Any ideas are greatly appreciated.

  • Since updating last time Firefox will not open new tabs unless I right click on a link. It won't open them via file or the tab at the top of the brwoser. Anyone know how to fix this?

    Since updating last time Firefox will not open new tabs unless I right click on a link. It won't open them via file or the tab at the top of the brwoser or usinf ctrl + t. Anyone know how to fix this?

    I can press ctrl for a new tab but otherwise a new tab does not open. I actually need help regarding this new Synch which apparently will be in Firefox automatically in an upcoming version so I am asking how that will synch with people who use LastPass-of course because I use this very successfully and really am not eager to change the set up that I have in place at this time.
    I have read through endless FAQ trying to find anyone else who has this question or concern but have found nothing. Can you please tell me how that service will get along with LastPass which does basically the same thing as Synch-it is probably spelled wrong as it looks wrong to me but if I click back to where this issue began, I will lose all of this question so please respond for the upcoming service synch.

  • How do you get PSE12 to stop opening the keyword menu at the top of the screen

    How do you get PSE12 to stop opening the keyword menu at the top of the screen when you want to isolate tagged photos?????????????
    it takes up 1/4 of the screen. This is so stupid. PSE10 had it done right, just a click box and boom all the photos tagged would be there!
    This makes NO sense the way it is done now.
    How do you turn it off, please . I am ready to send this back to amazon and go back to 10.

    Ceslaus1234 wrote:
    I'm sorry but what difference does it make if I post here or in Elements Village?
    None,
    But giving the link is easier for me than typing a new answer...
    Sorry for being so lazy .

  • My old Firefox used to show web addresses at the top near the toolbars, how do I bring that feature back where I can type in a website address?

    My old Firefox used to show the website being visited and one could type in a website to change to another website. The new Firefox does not have this feature. How do I change my new Firefox so that I can type in a web address. This used to be at the top of the page.

    Make sure that you do not run Firefox in Full Screen mode with all toolbars hidden.
    * Press F11 to toggle full screen mode (Firefox/File > Full Screen)
    If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
    * If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
    * If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
    * If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
    See also:
    * http://kb.mozillazine.org/Toolbar_customization
    * https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

  • How to make the spry Collapsible content to appear/expand from the top of the tab - not bottom?

    I hope this question does not sound confusing.
    When I click the Collapsible tab, I want the content to appear from the top - not the bottom. (See example link: http://www.longhollow.com - click "Time & Location" on the top right and you will see the content appear on the top). Do you know how to do this? I am not jquery expert, I would be appricate if you know how to do this.
    Thanks!
    Christie

    http://try.jquery.com/
    http://learn.jquery.com/
    https://tutsplus.com/course/30-days-to-learn-jquery/
    http://www.w3schools.com/jquery/
    Nancy O.

  • In Yosemite, How can I get the "READER" button back in the Tool Bar at the top of the screen

    In OS X Yosemite,
    How can I get the "READER" button back in the Tool Bar for Safari at the top of the screen ?
    Thanks,

    I don't see the "READER button".
    I see "READ LATER" but not the "READER" function.
    Maybe I'm doing it wrong.
    Please continue to HELP ME with this question.
    In the previous version of Safari, there was a "READER Button" on the right side of the tool bar. This brings up the selected web page in a READER mode all by itself, without the ads, etc.
    Are you saying that I can get this function by clicking on the Left side of the Address bar?
    When I do that, I get lots of icons, but NOT the READER button.
    Thanks

  • HT5557 I've always been able to see the clock at the top of the screen in iPad iBooks, but the clock has now disappeared unless I tap at the stop of the screen.  How can I get the clock to stay at the top of the screen?

    I've always been able to see the clock at the top of the screen in iPad iBooks, but the clock has now disappeared unless I tap at the stop of the screen.  How can I get the clock to stay at the top of the screen?

    cktan124:   I searched around and found the iPad does not have a PRAM.
    Anyone else want to guess?
    I found many folks here trying to hide of the clock, but I need the clock.  I use a PDF on my iPad for my notes when I am speaking in front of an audience.  I need the clock so I can kep track of time.

Maybe you are looking for