How does lion operate with time machine?

Before downloading Lion, I have an external hardrive which updates automatically via Time Capsule. On Lion does Versions do the same thing and/or is there any problem between operating Time Capsule and Versions at the same time?

No "versions"does not do the same thing as TM. There should be no issue running versions and your TM backup in Lion.

Similar Messages

How does airplay interact with Time Machine?

I just purchased a MacBook Pro, but the 256GB of flash storage is not going to be enough for my projects and media. My iTunes library has become pretty extensive, so I'm wondering if I'll be able to stream to my TV the content in my iTunes using Time Machine in combination with Apple TV? Anyone have this set up?

Time Machine is software that backs up the contents of your Mac. You will not be able to use those backups for everyday use to stream media over your network.
Suggest that you add another external hard drive and move your iTunes library to that drive.
Then Time Machine will backup both your Mac and the contents of the external drive. So, you have "originals" on one drive and "backups" on another. If one drive fails, then you at least have a copy on the other drive.

TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

sonjadg,
you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

Recently my MacBookPro locked up on startup. Could not get past a certain point of progress bar. I had upgraded to Yosemite few weeks back, with no issues. I ended up doing a Recovery with Time Machine and I got all my apps, photos, documents, etc. back o

Recently my MacBookPro locked up on startup. Could not get past a certain point of progress bar. I had upgraded to Yosemite few weeks back, with no issues. I ended up doing a Recovery with Time Machine and I got all my apps, photos, documents, etc. back okay --- except I got error messages that my "registration for Photoshop (I use CS4 Extended) and Photo Mechanic are no longer working". I worked on Photoshop first, and tried (several times) to fix it with their online help suggestions. Nothing worked.
Is there a simpler way to "get my licenses/registrations back"??? I am also going to contact Camera Bits about the Photo Mechanic issues. Thanks

Same problem and for months now. I haven't been able to find a solution, but I suspect that's because I don't know exactly what's wrong.

How does lion work with logic 9.1.4?

how does lion work with logic 9.1.4?

Greetings,
So far, everything seems as stable as before. Which doesn't actually mean its rock solid, but otherwise workable. I'm running a Focusrite Saffire Pro 24DSP with beta audio drivers. So far, everything is running well. I decided to jump into the 64bit work environment with Logic. I have yet to encounter huge problems with the 32bit audio bridge. Just making sure I bounce everything that is 32bit.
As for everything else within Logic, I can't say I hate Lion. Matter of fact, Lion seems buggier than Logic at the moment. Logic handles well in Lion, but Lion on its own overall is a different can of worms. I am mixed about a 10.7.1 update. Usually, it fixes something on the OS, but breaks something else in Logic.
I have faith that Lion will turn out to be as solid as Snow Leopard. SL was my favorite OSX so far. Lion still leaves allot to be desired in terms of stability.
Again, answer to your question: for me, Logic and Lion play nice.............for now.
LGK

My Ical events disappeared how do I restore with time machine/mountain lion?

I recently installed mountain lion. Today my ICal events disappeared and I can't restore them with time machine. What happened? How do I fix it?

Did you try rebuilding the library's database file as follows: make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

How does one SUCCESSFULLY transfer Time-Machine backup to a new (larger) hard disk drive using OSX 10.5.8

I have read a number of articles about how to transfer a complete Time-Machine backup to a new (larger) hard disk-drive. Some of these articles are specifically for OSX10.6 users, which are not applicable to me since I am operating with OSX 10.5.8.
However, I have tried several times to use the Disk Utility 'Restore' function, dragging my old time-machine volume into the 'Source:' box and my new volume into the 'Destination:' box. This works, of sorts, BUT the newly created volume on the new larger hard disk-drive remains the same size as the original volume on the old Time-Machine HDD, with no apparent way of increasing the new volume's size. So I am not really any better off:
E.g. the total capacity of my new HDD is stated by 'Disk Utility' to be 465.8 GB, of which I'm told 228.2 GB is used for the Backups.backdb folder, but only 4.6 GB of free space is actually available. Yet under the 'Partition' tab of 'Disk Utility' it tells me that there is still 236.4 GB of available space.
Does anyone know how to resolve this issue without upgrading to OSX 10.6?

First, how did you prepare your new drive? See:
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you plan to partition this new drive then be sure you create a larger partition for TM than your old volume.
Next, clone your old TM volume:
Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

Problems after doing full restore with Time Machine

If I reinstall Leopard and and do a complete restore with time Machine, I have to erase my Time Machine backup drive and do a complete TM backup from scratch because TM will not pick up where it left off doing incremental backups. It wants to start over like it's never done any backups at all. It's a pain because it take me 4 or 5 hours to back up 270 GB. I've had to do this twice so far because once I had a problem with my startup drive and just today I made an external hard drive with leopard and restored all my files via TM.
Is there anyway to get out of starting over from scratch when I do a full restore with TM ?

The following procedure works for me if your restore happens to be from the last backup that Time Machine completed. (I'm not sure if it would work just as well if you restore from an older point in the Time Machine history -- but it certainly should!):
After you complete the full restore (which will force a Restart when it completes), log in and then immediately go to System Preferences / Time Machine and Turn Off Time Machine to prevent any premature additional backups.
Now go to System Preferences / Spotlight / Privacy and drag the icons for all your hard drives (including your main hard drive and the Time Machine hard drive) from the Desktop into the Privacy list. This will stop Spotlight indexing of all these drives to speed things up for what follows. You will do the indexing later (see below).
If you have any sort of automatic virus protection active, disable it at this point to speed up what follows.
Then Restart again (to get things into a fresh state), and then immediately do a Repair Permissions for your main hard drive (using Applications / Utilities / Disk Utility). Be patient. This will take 30 minutes or more and the progress bar may not advance until the very end. Do not be alarmed when several hundred notifications come up, as most of them are minor tidying up items, but some are significant. For example, you will see the ownership get adjusted for every help file in every language for every Lexar printer the system knows about (minor). You will also see the permissions adjusted for the root directory of your main hard drive (significant).
And all of these permission and ownership repairs will happen EVEN THOUGH the files you backed up into your Time Machine may have had no such problems. They are, apparently, a result of the method that Time Machine uses to rebuild your file system during the restore.
When the permission repair eventually completes, Quit Disk Utility and Shut Down the computer.
Now reset the Parameter memory (PRAM). PRAM holds copies of certain system settings for rapid access. To do this, hold down the 4 keys Apple-Option-P-R continuously and press and release the power button. When you hear the SECOND startup chime, release those 4 keys. The system will continue to boot up normally. This makes sure the system's Parameter memory is in sync with the System Preferences resulting from the restore you just completed. It probably would have been anyway, but this makes sure. Among other things, this makes sure the system takes proper note of your "computer name" (System Preferences / Sharing) which is crucial to Time Machine's ability to recognize and use your previous backup database on the Time Machine hard drive.
Now log in and fire up Mail to let it automatically finish the restore of its mailboxes by importing the necessary mail lists. Quit Mail when it finishes.
If you have any other, application specific tasks to perform to complete the restore for any other applications, now is the time to do them.
Finally, go back into System Preferences / Spotlight / Privacy, select the line showing your main hard drive in the list, and click the "-" on the bottom to remove it from the list. Repeat this for every other hard drive EXCEPT for your Time Machine hard drive. Exit System Preferences. Spotlight will now begin to re-index those hard drives from scratch. Watch this by clicking on the Spotlight icon in the menu bar. Wait for indexing to finish.
Your restore is now at the point where you can let Time Machine do a new backup.
I suggest you Restart again to get things into a fresh state (not truly necessary, but it is what I do). Then go into System Preferences / Time Machine and, at long last, Turn On Time Machine again. Then do a Back Up Now (right click on the Time Machine icon in the dock and select Back Up Now from the pop up menu).
Because of the restore, Time Machine will now do a Deep Traversal of your entire file system looking for EVERYTHING that has changed compared to the last backup on its hard drive (rather than depending on the file system transaction logs as it normally does to make incremental backups happen much faster). The "Preparing" stage for this will take a long time -- about as long as a Repair Permissions pass in Disk Utility. Eventually Time Machine will start transferring files. This will be a backup of significant size because all the permissions repairs you did above, etc., count as changes as far as Time Machine is concerned, not to mention that certain portions of the file system are rebuilt during the restore. But it should be WELL SHORT of actually doing a complete backup of everything on your system. I.e., it is just a particularly large, but nevertheless incremental, backup added on to the previous stuff on your Time Machine disk.
Crucial to this is that Time Machine recognizes the prior database on its hard drive as applying to your computer. Thus the permissions repair and PRAM resetting steps above.
When that backup eventually completes, go into System Preferences / Spotlight and remove your Time Machine drive from the Privacy list. Exit System Preferences and wait for Spotlight to finish re-indexing your Time Machine drive.
Restart once again, just to get things into a fresh state, and then re-enable any antivirus "live protection" stuff you disabled above.
You are done.
From this point on, Time Machine should do "normal" incremental backups, and the previous history of Time Machine backups should be accessible and used by Time Machine just as before.
--Bob
Message was edited by: BobP1776

Mountain Lion: problem with Time Machine directories and spotlight indexing

I'm using a fresh install of 10.8 Mountain Lion on a 2011 MBP. It's a work laptop with many ASCII files containing numerical data (floating point numbers), with varying file extensions. Some of the files are multi-gig, some are only a few hundred K, and there are tens of thousands of them. Roughly 500G of numerical data.
I can disable spotlight from indexing certain subdirectories of my home directory on the local drive. However, when using Time Machine to backup, I seem to be entirely unable to prevent spotlight from attemping to fully index the external drive (Time Machine volume). I actually let spotlight run for over 36 hours this weekend in a futile attempt for it to finish indexing the TM volume. The /.Spotlight-V100 index on the external drive is roughly 100G and continuously written and overwritten. /var/log/system.log had various "Merging failed" messages for temp spotlight files. I deleted the index, let spotlight run again overnight, but it did not finish indexing. "sudo fs_usage -f filesys mds mdworker mdimport mdworker32 | grep open" showed spotlight slowly chugging through the thousands of numerical files.
I believe the problem is related to this old report from someone who noticed a leopard -> snow leopard change:
http://hintsforums.macworld.com/showthread.php?t=106703
http://forums.cnet.com/7723-6126_102-366184/snow-leopard-10-6-spotlight-indexing -and-disk-usage/
However, I don't see an easy solution. In ML, if you drag the TM volume to the spotlight privacy list it gives you a message about how you can't disable indexing of TM volumes because it's essential for TM. I have not yet tried to manually put in some kind of .metadata_never_index file in the relevant TM volume directories (I am not sure if that will do anything, or perhaps break TM backups), but that's one possible next step.
Anyone have ideas on how I can have my TM backups work but the spotlight indexing of all these data files (their subdirectories) disabled? I'm not specifically TRYING to back up those data files with TM (they're duplicated elsewhere), they're just on the same machine as a bunch of other stuff I need backed up via TM. Apple has a disaster on their hands for anyone trying to backup a machine which also has large data sets.

I'm not aware of any avenue to tell spotlight to not index all or part of a backup.
However, the indexing should work, even if takes a long time.
I don't think this is a new issue and has been part of TM from the start.
Realistically, it may be time to consider whether TM is the best choice for these data files?
Are they very volatile do they change frequently both as to content of individual files and total set of files?
If not, then a clone or syncing type of backup might be better suited for these files.
I do not back up all my files via time machine. I keep photographs and music outside of Time Machine. to be sure they are backed up but via clones.
To show why this might the best take photographs. My photographs are basically immutable once they enter the system, but I may come back with 5000 images from a trip and whittle that down to a few hundred eventually. This would cause a lot of files to be saved in TM that are no longer wanted, - but are not easy to remove formthe backup. while the ones I want haven't changed. TM is not geared to make handling that easily.
As a further aside, ideally one should back everything of value up twice via 2 different means.
I've had backup drives fail.I've had TM logically fail (disk is fine -TM internal data structures bad).

How to restore ical with time machine

I have (some how) lost all of my appointments in my "Work Calendar" within iCal except for one entry (which is strangs).
I have been trying to restore from Time Machine, but, the user interface for iCal through Time Machine is "not easy" to figure out or to use.
I am unable to open the iCal folder as I can do with other ones to restore the data.
How can I do this - I have never been able to do this restore in iCal & Contacts.
Please can any one help me?

Frank Lowney1 wrote:
Another factor that may be relevant is that I seen iCal appear and disappear from the MobileMe list of things to synch. It's out of view 99% of the time.
If you are talking about something you see in System Preferences>MobileMe then it's not relevant - iCal does not in fact sync, it reads the calendars directly from the server (though there is by default a cached local copy) and as I said the settings in that prefs pane are nothing to do with iCal any more.
iCal is controlled in System Preferences>Mail, Contacts& Calendars and you should check that your MobileMe login details are correctly entered there - please see http://support.apple.com/kb/HT4758
As to the process I detailed, in the first set of numbered instructions, please make sure that when you have exported your MobileMe calendars you import them back into a calendar listed under 'On My Mac' - these cannot be deleted by MobileMe and from your description it sounds as if you may not have done this. Given your problems, I would suggest choosing new name sfor the calendars, at least temporarily.
Then when you reconnect to the internet it should not be possible for MobileMe to delete the calendars and you can proceed with the next steps.

Flashing folder icon -- how to retrieve data with time machine?

Hello all --
I was away from home for three months. When I returned and turned on my trusty 20" iMac running OSX 10.7.5, I got the flashing folder icon. I have tried all the recommended methods of restoring the system and nothing has worked. The processor obviously will no longer recognize the hard drive, which to me means the hard drive has either crashed or the cable connecting the two has failed. I am not as concerned with saving the unit itself, but with saving my data. I have a 128 GB flash drive configured as a Time Machine backup that the processor can "see", but I don't know how to transfer that data to another machine or an external hard drive that could be used in one of my other Macs. Any suggestions?
Thanks in advance,
Dave

You restore the TM backup to the other Mac. Connect the TM drive to the "new" Mac and open Migration Assistant (Applications - Utilities - Migration Assistant) and migrate from the TM drive. Remember this will create a new user account.

USB HD attached to Time Capsule - how to backup it with Time Machine

Hi.
I have a time capsule, and a small USB HD connected to it.
This drive I use it as a NAS, a file server for all my home network.
It's so convenient.
But I would love its content to be backed-up by Time Machine,
how could I do that ?
I could mount it and back it up to my laptop, which in turn would be backed-up by Time Machine for example (I don't know how to do it).
Any ideas/solutions ?
TIA, alex

Welcome to Apple Discussions, alexfromfrance in Shanghai .
As long as the USB HDD is formatted in HFS+, Time Machine will recognize it and ask if you want to use it as a back up for TM if you plug the drive into a USB port on your Mac. If asked, you should click NO. Under TM Preferences, you should click Options and see if this drive is EXCLUDED. If so, uncheck it.
If you need to re-format it (and lose all your content), it would need to be plugged into your Mac directly via USB (not through Time Capsule) using Disk Utility.
If you are asking if a HFS+ USB drive can be plugged into TC directly and backed up by TM, I'll be attempting this in the next few days (when I have time to move the data off the HDD onto another drive).
Good luck!

How to restore mail with Time Machine?

Hi,
I recently (accidentally) deleted an old mail account, which also seems to delete all of the messages on that account from your mail client.
Using time machine I selected the application (from a backup about a week ago), and clicked 'Restore'.
I selected 'Keep Both' so as to maintain my newer mail (just seeing what would happen).
Now I have two mail applications, one called 'Mail' and one called 'Mail (original)'
However, neither of them have my 2nd account with my associated emails. Can anyone advise?
Just to be clear, both mail apps seem to be exactly the same.
Many Thanks,
Drew
Message was edited by: xroox

Of course they are both the same. The application is not what you want to restore; it's the mailboxes that you want. Throw one of the redundant applications away. Now open Mail, then enter Time Machine while Mail is the current application. Step back in time until you find the mailboxes you need.

Retina Macbook Pro with Mountain Lion freezes with Time Machine

I have a new MBP Retina, it crashes more than any other mac I've owned in the past 18 years! If it turn Time Machine off, it becomes much more stable, but I now dont have a back up (I kept getting the 'sparse bundle in use already" error so I wiped my time machine a,d reset everything).
Ive done a clean reinstall, zapped PRAM, reset all system settings, and it still wont run unless time machine is turned off. Is this a common issue and can we expect a fix soon?

screen freezes, no keys or mouse work, have to hard restart .
happens during a host of different activities with different software open, during back ups, installing other programmes etc. screen wouldnt work when it had gone to sleep. I only turned time machine off because i couldnt get the mac running for long enough to do a back up, then hey presto, it hasnt crashed since!

How to start over with Time Machine (because drive is running out of space)

I have a 500 gig drive attached to my iMac. Time Machine's been running for ages. TM has finally depleted the drive of most space. Should I throw out some of the older folders in the backup folder for TM, or chuck the entire folder and restart TM fresh. (Nothing terribly crucial to save recently.)
Thanks.

Unfotunately my time machine backup gets to near the end and says "there is not enough space to do this backup" Neither excluding files nor waiting for it to kick out old files seems to solve the problem. I am stuck it would seem unless I erase the whole backup and start over. I didn't think I would have to do this.

How does lion operate with time machine?

Similar Messages

Maybe you are looking for