How does one assign change bars to the contents of an anchored frame?

Assigning change bars to text in FrameMaker 10 appears to give inconsistent results. Sometimes I can select the contents of an anchored frame and assign a change bar to it. Other times, only the marker is assigned a change bar and not the contents of the anchored frame.
Also, sometimes I can select a table and assign a continuous change bar to it. Other times, a separate change bar is assigned to individual rows of the table.
Are there any workarounds for this inconsistency?

.

Similar Messages

  • I'm having problems with iPhoto and the facebook set-up.  Every time I attempt to do so it says an error has occured and try again later.  I have not seen a solution posted.  Therefore, how does one contact Apple to solve the problem?  I'm new to the worl

    I'm having problems with iPhoto and the facebook set-up.  Every time I attempt to do so it says an error has occured and try again later.  I have not seen a solution posted.  Therefore, how does one contact Apple to solve the problem?  I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

  • How does one disable a button in the web UI?

    How does one disable a button in the web UI? I am trying to disable the edit button in the web UI for Accounts. What are the steps to take in order to accomplish that?

    Hi Abdul,
    Locate the Toolbar group group for that application. It should be ACC_OIC01 in your case. You can deactivate a specific button (event) under the toolbar group.
    Regards,
    J.Prabananth

  • How does one remove duplicate versions of the same songs on an iPhone5?

    How does one remove duplicate versions of the same songs on an iPhone5?

    Yes, I use Live Bookmarks.
    This is the RSS http://www.ctech.com/forum/rss.php
    Each of those entries at the RSS site show up in my Firefox RSS folder twice. The content of each entry when I go to it is exactly the same. It's not that one is the reply to the original post or anything like that. For instance, see the attached image of the list of items that show up. The highlighted yellow on top is an example. Both of those links display exactly the same original post and replies. Why is that? Is is possible that somehow I'm subscribed twice? Does that make sense? How can I delete the duplicates, or for that matter, clear all those items that show on the list? I just want to see the new ones. Thanks.

  • How does one recover lost photographs on the computer?

    How does one recover lost photographs on the computer?

    My photographs were successfully uploaded to iPhoto when I was forced to restart my computer. When it turned back on again, the photographs were gone from my camera and my computer. I do not know how to restore them from my backup and cannot find the photographs anywhere else. Thank you for your help!

  • How does one delete VPN configurations in the settings list not used any more?

    How does one delete VPN configurations in the settings list not used any more?

    Sorted found profiles and delete from there

  • In the new Pages, how does one send an image to the background (and make it selectable)?

    How does one send an image to the background in the new Pages and how does one make it selectable?

    Also why don't TEXT to Speech short cuts established in system preferences work in the new Pages?
    I am confused (and not completely happy)

  • How does one resize a photo to the dimensions required by a contest?

    How does one resize a photo in aperture to the dimensions required by contest?

    Are you submitting a print or a file?
    You set the size of your print in the print dialog.
    You set the number of pixels (the unit of linear measurement of digital images is the pixel) for a file when you create that file by exporting an Image from your Library. You can specify a recommended number of Pixels per Inch by using the (mis-named) DPI field in the Image Export Preset you use when you export.
    The files you import have a height and width in pixels.  Height/width = the Aspect Ratio.  You can crop to any aspect ratio using Aperture's Crop tool.
    What are the specs required by the contest's sponsors?
    Message was edited by: Kirby Krieger -- added aspect ratio and cropping.

  • How does one clear duplicate posts of the same item that show at an RSS link?

    I subscribed to an RSS link and get duplicate, two identical in content posts for each entry. Is it possible to clear, delete all items or history of the entries/posts that show up at the RSS folder? Thanks.

    Yes, I use Live Bookmarks.
    This is the RSS http://www.ctech.com/forum/rss.php
    Each of those entries at the RSS site show up in my Firefox RSS folder twice. The content of each entry when I go to it is exactly the same. It's not that one is the reply to the original post or anything like that. For instance, see the attached image of the list of items that show up. The highlighted yellow on top is an example. Both of those links display exactly the same original post and replies. Why is that? Is is possible that somehow I'm subscribed twice? Does that make sense? How can I delete the duplicates, or for that matter, clear all those items that show on the list? I just want to see the new ones. Thanks.

  • How does one adjust equalizer settings in the iPhone?

    I've seen a post on this forum that it is possible, but not how I actually do it.

    To Adjust the EQ settings go to Settings then tap on iPod, you will see EQ in there and will be able to adjust.

  • How does one assign a user to several groups?

    I am a student learning Databases, Oracle to be exact, and am trying to install a developer's copy on my MAC G4 running OS X 10.4.11. To do this I need to assign user oracle to several user groups. Trouble is, although I know UNIX fairly well I don't know Sys Adim commands well at all. Can am one help with this one?

    Thank you for your posting, however I did try this before I posted here, can assign a user to one (1) group, but can not figure out how to assign a user to more than one (1+) group. That is the root cause of my problem. Do you know how to assign more than one group? Again thank you for your input.

  • Using a PCI-6534 card, how does one write and read from the board simultaneously after being triggered on the StartTrig input ?

    I've copied two NI-developed VI's into a single VI. The first VI is the LV 'Buffered Pattern Input-Trig VI' under examples/daq/digital/653x. Using an external data generator, I send it a pulse on StartTrig, a clock on REQ1 and data on DIOA0. The start pulse is negative going so I set the front panel input to trigger on "falling edge" with clock set to 'external'. This VI is configured as Port 0 and Group 0. Once this VI is triggered I need to then start another VI which is simply the Buffered Pattern Output VI that also ships with LV. This VI is configured on Port 2, Group 1. This VI is used to simply send out a previously d
    efined array of data on DIO C0, C1 and C2.
    So, I receive a Start Trig, then clock in data, and then immediatly want to send out data. My problem is that I can't figure out when my receiving VI gets triggered on the StartTrig input. If I know when the trigger occurs, then I can wire this condition to a case statement and activate the second, or write VI. Without having the Trigger condition be met to enable the output VI, the problem is that it always outputs without even be triggered. So, where or how do I tap to find out when the StartTrig happens ? In other words, how do I know when the receiving VI has received a StartTrig pulse. There's got to be a way to do this, and I need to run in continious mode, so I can keep receiving and sending out data over and over again. Any ideas ? If your answer is to look at the examples, please tell me exact and specific examples, because I have not been able to find any examples directly related to my goal. thanks.
    Kirk

    Nestor-
    I tried your first suggestion of connecting ACK1 to ACK2. But, I get Error 10010 at Digital Buffer Control when I run the VI. I've added an array of 32 ones and zeros to the output VI so that I have some data to write. What's really interesting is when I have a scope probe on ACK1 and ACK2 which are now common, the voltage level is less than 5 volts, around 4.7, but there is something wrong with the signal, a few spikes, I've seen this before, like 2 signals are trying to drive the same output or something. When I remove the connection between ACK1 and ACK2 the signal looks perfect since ACK1 is being driven by my data generator. This leads me to believe that you can't connect ACK1 to ACK2, or atleast you can't do it with the way I have the VI'
    s configured. Also, I have a scope probe monitoring DIOC0 (since I'm writing to Port 2,which is Port C) and I don't see any data coming out, which makes sense since I get the error mentioned above.
    In terms of my configuration, I have 2 VI's on the block diagram. I have Buffered Pattern Input-Trig.VI with the following settings:
    Group: 0
    Device: 1
    Port List: 0
    Buffer Size: 1000
    Clk Soruce: External
    Trigger Type: Start Trigger
    Trigger Condition: Trigger off Falling Edge
    # of pretrigger points: 0
    For the 'writing VI' I copied the Buffered Pattern output-Trig.VI with the following setup:
    Device: 1
    Group: 1
    Port List: 2
    #of updates: 1000
    Clock Source: Internal
    Trigger Condition: Trigger on falling edge
    So, do you have any ideas on what might be wrong ? Just realized that I can attach files, so my VI is attached.
    thanks.
    Kirk
    Attachments:
    input_output_at_the_same_time.vi ‏164 KB

  • How does one import images and maintain the sorting order?

    i'm trying to import 59 images (1024 x 768 png files) into keynote. i want them to create a series of image slides with 1 image/slide and keep them in the order i.e. sorted by image file name such as:
    image001.png
    image002.png
    image003.png
    and so on.
    i've tried dragging and dropping these images onto the navigator sidebar but the images get out of order randomly.
    has anyone encountered this? this seems like a bug.
    thanks,
    matt

    hi marcus.
    thanks for the suggestion.
    while i have not tried your solution yet, i'll bet that it'll work and you're correct, it would be faster than rearranging the slides later. it drives me crazy that what i'm trying to do does not work out of the box. if there's one thing apple promotes in its apps its got to be drag and drop. that this does not yet work is nutty.
    good luck,
    matt

  • How does one enable Stereo Mix on the Sound Blaster Arena Surround USB Gaming Headset

    I'm usually streaming games and I picked up this headset to replace my old gear.
    I've noticed in 32-bit XP Pro I do not have the option to enable stereo mix which was how i was able to stream game audio and commentary on.
    Does a work around exist to enable stereo mix or to otherwise transmit audio from both the input and playback sources?
    BTW I've also posted this on the Livestream forums to see if I can get a bite.

    [url="http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-Surround-USB-Gaming-Headset-broken/td-p/576577">moved to headphone & headset section[/url]

  • How does one manage function sounds on the MacBook Pro?

    I cannot stand the cute little "twinkle" sound made when I save a document, but don't want to mute the machine in order to avoid it -- I want to turn it off or at least substitute something else. How?

    You may want to try deleting the file com.apple.soundpref.plist, then resetting your sound preferences.
    The file is located here: Mac HD/Library/Preferences. There may also be one here: Mac HD/Users/youraccountname/Library/Preferences. Delete both, if both are present.

Maybe you are looking for