How does one replace carriage returns (enter key) in text areas

I have an address text area in one of my pages where end users are hitting enter after each part of the address. I want to replace the carriage return hex('0A') with spaces. How can I do that?

If you're manually saving your data, you can just change your insert/update code as below:
insert into myTable
(myCol)
values
(replace(:PXX_MY_TEXT_AREA, Chr(10), ' '))
where ...If you're building a page where you aren't directly saving your data, you can add an "on Submit/Before Computation" process that does something like:
:PXX_MY_TEXT_AREA := replace(:PXX_MY_TEXT_AREA, Chr(10), ' ');

Similar Messages

How does one replace a lost Time Capsule power cord? thanks

how does one replace a lost Time Capsule power cord? thanks

It is a standard figure8 power cable.. any electronic retailer will stock them.
You will find it hard to get white.. they are all black.. you can ask at apple store or repairer.. I don't think it is sold as an accessory.. but a repair shop might have a few.

In InDesign, how does one determine the pixel size of a text box? Specifically, we need to write text to specifications of 600 pixel width, and have no idea a) how to scale a text box to specific pixel width, b) how to

This may be a basic question... but in InDesign, how does one determine the pixel size of a text box? Specifically, we need to write text to specifications of 600 pixel width, and have no idea a) how to scale a text box to specific pixel width, b) how to determine what word count we can fit in, and c) how to do it in a table? Thanks!

Set your ruler increments to pixels Preferences>Units & Increments. You can fill the text box with placeholder text Type>Fill with Placeholder text and get a word count from the Info panel with Show Options turned on from the flyout.
From the Transform panel you can set a text box's width and height

In the new Keynote how does one find the Wrap Inspector to wrap text around a photo??? Thanks

In the new keynote, the help section refers to the Wrap Inspector. How does one find that or how does one wrap text around a photo?? Thanks

You can also use the shape tool to draw a shape roughly following the outline of the graphic you want to wrap text around, change the fill and stroke to "none", then paste your text within the shape. It's a few more steps, but it opens you up to many creative alternative layouts.

How does one change the folder to which scanned images are saved?

Using a CanoScan 9000F Mark II scanner
Using the ScanGear driver software that came with it
Right now every time I scan something, it is automatically saved in "My Documents", and I have to drag and drop the file where I really want it to go. How do I change it so that the file is saved where I want it to go in the first place. Also, it is automatically assigning a file name so that I have to go to the file and change that to what I would like it to be too. How do I make it so that I can name the file before it gets saved. Neither do I see where it gives me the option to choose the format in which the file is saved; it is saving the files automatically as JPG, but I would like to save them as TIFF or BMP.
These seem to be very standard options; so I don't know why I'm finding it so hard. I must be blind or something.
Thank you for your time and assistance.

Hello barbarossa,
Great question! You can change all these settings through the My Image Garden software. The exact procedure will vary depending on the version of Windows you are using.
If you are having any difficulty locating this software, feel free to visit the link below to let us know your operating system and we can follow-up with step-by-step directions. Thanks!
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How does one change a "rollover" value in a text field of a fillable PDF?

I have a fillable PDF, and the values displayed when rolling the pointer over a fillable text field are showing some strange values. I inherited this form from someone who is no longer with the company. I need to be able to change the values but can't figure out how. I'm new to LiveCycle so any help is greatly appreciated.

When you click on the field, right click to properties. If the tab isn't there then go to the top toolbar, click on Window and it should appear in the list there. Once you click on it in the Window menu it will appear as a tab on your properties box.

How does one create a form with prefilled editable text in Acrobat Pro, such as for fliers or business cards that can be edited and saved by the end user in Reader?

Working on a Mac. Have seen examples so know it's possible.

When I created a new template like you told me, I wasn't given the option to rename the fields. See screenshot below. I'm just given the option to add a new template. Changing it refers to changing the template to a different page.
If you can show me how to have the fields renamed automatically or use the rename parameter, I think that should fix it.
Under Tools>JavaScript>Document JavaScripts, I've added a Script named "PackagingArtwork".
// Here is the code
function PackagingArtwork()
{this.createTemplate({cName: "PackagingArtwork", nPage: 5});
// Here the code that spawns the template
var PackagingArtworkArray = this.templates;
          var PackagingArtwork = PackagingArtworkArray[0];
          PackagingArtwork.spawn(this.numPages, false, false);
This is what the JS debugger said.
Acrobat EScript Built-in Functions Version 10.0
Acrobat SOAP 10.0
var t1 = createTemplate("t1", 0);
var oXO = t1.spawn({nPage: numPages, bOverlay: false});
while (numPages < 50) {
    t1.spawn({nPage: numPages, bOverlay: false, oXObject: oXO});
undefined
[object CosObj=<<Stream>>]
TypeError: PackagingArtworkArray is null
2:Field:Mouse Up
TypeError: PackagingArtworkArray is null
2:Field:Mouse Up
TypeError: PackagingArtworkArray is null
2:Field:Mouse Up
TypeError: PackagingArtworkArray is null
2:AcroForm:Duplicate Packaging Artwork:Annot1:MouseUp:Action1
TypeError: PackagingArtworkArray is null
2:Field:Mouse Up
TypeError: PackagingArtworkArray is null
2:Field:Mouse Up
TypeError: PackagingArtworkArray is null
2:Field:Mouse Up
TypeError: PackagingArtworkArray is null
2:AcroForm:Duplicate Packaging Artwork:Annot1:MouseUp:Action1
TypeError: PackagingArtworkArray is null
2:AcroForm:Duplicate Packaging Artwork:Annot1:MouseUp:Action1
TypeError: PackagingArtworkArray is null
2:AcroForm:Duplicate Packaging Artwork:Annot1:MouseUp:Action1

How does one change ownership of event?

How does one change ownership of an event?
We are running OCS 9.0.4.2 on redhat enterprise linux 3.0
I have a calendar entry which I got from:
mySess.fetchEventsByRange(Api.CSDK_FLAG_STREAM_NOT_MIME | Api.CSDK_FLAG_FETCH_EXCLUDE_DAILYNOTES |
Api.CSDK_FLAG_FETCH_EXCLUDE_DAYEVENTS, hand, in_start, in_end, eventProp, result);
BEGIN:VEVENT
UID:20050620T151524Z-505dd-1-7af6ed32-Oracle
ORGANIZER;X-ORACLE-GUID=FEA199DDB9763627E030378E793341C1;CN=old owner:mailto:old.owner@email
DTSTART:20050801T120000Z
DTEND:20050801T220000Z
END:VEVENT
So now I'm trying to save the event under the new owner using this:
mySess.storeEvents(Api.CSDK_FLAG_STORE_MODIFY,event,result);
where event reads as follows:
BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//ORACLE//NONSGML CSDK 9.0.4.2//EN
BEGIN:VEVENT
UID:20050620T151524Z-505dd-1-7af6ed32-Oracle
ORGANIZER;CN=new owner:mailto:new.owner@email
DTSTART:20050805T120000Z
DTEND:20050805T220000Z
END:VEVENT
END:VCALENDAR
And i've run mySess.setIdentity to change to the old owner and new owner with no success?
Please how does one change the owner of an event?

The Calendar Sdk doesn't allow you to change the ownership of an event. (ORGANIZER value).
Regards,
Jean-Philippe

How does one turn the french keys on and off in the wireless keyboard?

how does one turn on and off the French keys on a wirleless keyboard?

Hello dustysmart,
I believe what is going on is that you have a secondary keyboard turned on within Windows. When you press alt + shift at the same time you are alternating between the two keyboards.
To check this (and possibly delete the French keyboard if you don't want it) you can go into Control Panel and check under Change Keyboard.
This article will provide you instructions depending on which version of Windows you are using.
How to Type French Accents
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

How does one show full message headers in Mail 8.1? The previous 'complete header' option has been replaced with a time consuming 'custom' choice.

How does one show full message headers in Mail 8.1?
he previous 'complete header' option has been replaced with a time consuming 'custom' choice.

Customize your toolbar in Mail and add the All Headers button:

Return/Enter key does not work in Safari/ Set up of new imac

Setting up addresses when I type an address in the url window, or like now to return to the next line, the return/ enter key is not functioning? Any help would be much appreciated. thanks John

Hi,
Try shutting down the iMac. Disconnect the keyboard. Wait about 5 minutes. Reconnect the keyboard and restart the iMac. See if the Return key works now.
If not, since it's so new, take the keyboard back for a replacement.
Carolyn

How to find a carriage return and Line feed?

I need to detect if a crriage retunr and line feed present on each row in my text file before allowing user to upload the text file
I know how to remove them from each line but what I need is to detect them no removing them from file.
Our concern is when the a row does not have carriage return and line feed.
Is there a way to find this using CF? Please help
thanks

That is exactly the problem Dave, if some rows do not have line feed, they're not being inserted into DB, it skips other steps and go right to finish. It looks
like the file is done processing.
So I need to do early rejection to this kind of file.
I used cfloop to catch anything else that do not follow the formatting rules.
Here is what I already done:
Right after the file got uploaded, I have these codes:
<cfloop index="x" file="#MyFile#" >
<CFSETMyLine = Replace(x,chr(9),"|", "ALL")>
I'm using a few functions, such as, Left(), Mid(), Right(), etc to make sure certain rules are followed.
Up till here, it's done and tested, everything is working.
The only problem is when 1 or more rows don't end up with line feed and or carriage return.
I plan to add some codes to check the end of each row for chr(10) since it is looping for every row anyway.
If detected, process file normally otherwise stop processing.
</cfloop>
So this can't be done in CF?

Receiving attachments with carriage return / enter after filename extension

Hello All,
For a while already I am seeing carriage return / enter / newline after the filename extension of (some of) my attachments.
Clicking the attachment fails to open it. The only remedy I have is to save the attachment, navigate to it, click the filename, and remove the extra newline after the filename.
It then asks me if i want to use the new extension, for example
Would you like to use
".pdf"
instead of
".pdf
(I had to cut up the sentence above to make the bogus CR visible)
After agreeing the file works fine and opens normally ( + Icon changes back to preview icon).
The file shows up as "symposium 2010.pdf??" in Terminal.
and
/Users/vincent/Desktop/symposium\ 2010.pdf
when pasted in vi - yes the third white line is included.
Did anyone see/solve this issue before? Wading through the forum here did not turn up a solution...
Regards, Vincent

Hi Thomas,
I am getting following error:
Only one top level element is allowed in an XML document. Error processing resource 'file:///C:/Users/guptavis/AppData/Loca...
<SupportCaseID>0055000018</SupportCaseID>
-^
for the below code
DATA: LV_NEWLINE TYPE ABAP_CR_LF.
LV_NEWLINE = CL_ABAP_CHAR_UTILITIES=>CR_LF.
CONCATENATE
V_XML '<TimeStamp>' wa_XML-TimeStamp '</TimeStamp>' INTO V_XML.
CONCATENATE
V_XML lv_newline INTO V_XML.
CONCATENATE
V_XML '<SupportCaseID>' wa_XML-SupportCaseID '</SupportCaseID>' INTO V_XML.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
    TEXT           = V_XML
MIMETYPE       = ' '
ENCODING       =
IMPORTING
   BUFFER         = V_XML1
EXCEPTIONS
   FAILED         = 1
   OTHERS         = 2.
CALL METHOD CL_WD_RUNTIME_SERVICES=>ATTACH_FILE_TO_RESPONSE
EXPORTING
    I_FILENAME      = 'C:/TEMP/TEST.XML'
    I_CONTENT       = V_XML1
    I_MIME_TYPE     = 'XML'.
Do you have anyu idea how can I rectify this error. As per my requirement I have conncatinate so many more lines.
Regards,
Vishal.

How does one go about getting the Kit Kat upgrade?

I've searched the Verizon site ad I can't find how to download it. Must one be selected?

Thanks for your reply. I went to Settings and About Phone, however, there was a "System updates" that showed a history and a "Check for new software update" key. I tried that and it returned with Your phone is up to date. I guess I'll have to wait for Verizon to send me an update.
       From: clydefrog4963 <[email protected]>
To: John Manning <[email protected]>
Sent: Sunday, December 7, 2014 5:20 PM
Subject: - How does one go about getting the Kit Kat upgrade?
#yiv6222900142 img
|
|
|
A message from the Verizon Wireless Community
|
|   |
How does one go about getting the Kit Kat upgrade?
created by clydefrog4963 in Samsung Galaxy Note 3 - View the full discussionVerizon has started pushing the 4.4.4 KitKat update on the Note 3, I got mine today. It poppped up when connected to my computer on Kies but you can do it on your phone by going to settings, all the way to "about phone" at the bottom, then click on "software update." Its best to do this while connected to wifi, and make sure your phone is at least half charged. Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community Start a new discussion in Samsung Galaxy Note 3 by email or at Verizon Wireless Community
|
|
© 2014 Verizon Wireless
Verizon Wireless
One Verizon Way
Mail Code: 180WVB
Basking Ridge, NJ 07920
Not interested in these emails anymore, or want to change how often they come? Update your email preferences by visiting https://community.verizonwireless.com/user-preferences!input.jspa.
|
We respect your privacy. Please review our privacy policy for more information
about click activity with Verizon Wireless and links included in this email.
|
|
|

How does one go about authenticating so that getRemoteUser() does not retur

Any Help Please
How does one go about authenticating so that getRemoteUser() does not return null?
am using oracle application server 10g R3 and i already modify wy web.xml but its not working also
thanks
thanks

Hello,
Easiest would be to get an External Hard Drive & clone eerything asap, you can even boot/run from the external, & Firewire would be far faster than USB.
Even if you replace the Internal, you'll need an externsal to clone to first.
http://eshop.macsales.com/search/firewire+drives
Many of those come with Backup SW, or...
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Here's the steps to replace the Internal Drive...
http://www.ifixit.com/Guide/Installing-iMac-Intel-24-Inch-EMC-2111-Hard-Drive-Re placement/5211/1

How does one replace carriage returns (enter key) in text areas

Similar Messages

Maybe you are looking for