How does the system know...how to read customore pricing procedure

Hie Guys, Can you please let me know how the system knows How to ready customer pricing procedure.
system always reads customer pricing procedure from Sold to  party. can you please let me know if there is any setting for the system to know how to ready the customer pricing procedure. what should be done if we want the system to read it from ship to party?
thaks!
Marry.

Dear,
Seems like you can get the help of abaper and see at what point system check the different combination for pricing procedure determination.
If there is any EXIT / Enhancement available at this point, you can write a logic to fetch the customer pricing procedure from the SHIP TO PARTY Master data.
Thanks & Regards,
Hegal K Charles

Similar Messages

  • How does the system knows age or seniority is crossed for so and so... EE

    Hi Experts,
    In my project we have configured some Health plans based on ages and seniority,
    Employee can enroll in to the plan when they reach the age or seniority,
    my question is how does the system knows  age or seniority is crossed for so and so... EE, where exactly we do this setups
    Pleae let me know your valuable answers
    Regards
    Sreeni

    hr_entry_date and you can use various
    fm to calculate this, It reads 0019, 0041 or Hdate feature
    3QP8                           Time related calculation function mod.
    HR_AUPBS_SENIORITY             Calculate the whole length of service of employee
    3RP3A                          Leave schem proration modules
    SGPS_LS_SENIORITY_CALCULATION  Function for seniority calculation for Singapore Leave Scheme
    HRDO
    HR_DE_PBS_SENIORITY_PERIODS
    HRFPBS4AV0
    HR_PSF_AV_ANC_INPUT_SENIORITY
    HRF_METADATA_IT
    HRF_READ_SENIORITY_IT

  • How does the system knows hire action first

    Hi all,
    Iam new to this community, recently i have joined as an SAP HR trainee ,and i am undergoing SAPHR training Programme.
    why can't the system allow us to do promotion action before Hire action?where do we configure this to make it happen, how does the system knows to do the Hire action first, where are the settings for this..
    Swathi

    hai
    there are a number of programmes running in the back groung when u do any application.
    the validations will be written in them
    when u try to do something through the programe running at the back ground does these validations  like the example u have taken when u do the promotion action it checks whether actions exists or not if not then it throws the error written in the program.
    regards
    nalla

  • Can anyone let me know how does the system calculate forecast strategy?

    Hi all,
    I am new in Demand planning,,  I can see a couple of Forecast strategy used in  the production. I would like to know how does the system does the calculation for the forecasting strategies like
    36     Median method
    13     Moving average
    94     Linear regression
    etc.
    Can anyone pls guide me how does the system do the calculation and how to validate those calculations!!
    Thanks
    Pooja

    Hi Pooja,
    The below link will contain the detailed list of all forecast strategies alongwith how
    it will be calculated alongwith the formulas
    http://help.sap.com/saphelp_scm70/helpdata/EN/ac/216b6e337b11d398290000e8a49608/frameset.htm
    Please confirm whether this helps you to resolve your query
    Regards
    R. Senthil Mareeswaran.

  • How does the system calculate nondeductible taxes?

    Dear Gurus,
    How does the system calculate nondeductible taxes?
    Thanks..

    The sytem calculates the Taxes based on the Tax rates maintained in a tx code, the Caluctaion is based on the taxing procedure assigned to the Country.
    Non deductible tax is identified based on the Account key assigned to the Condition type in the Taxing procedure.
    The Non deductible tax Account keys are
    NAV - Non-deduct.input tax ( This will distribute the tax into a new line item)
    NVV - Non-d.input tax dist ( this will Distribute to relevant expense/revenue items )

  • How does the system identifies whether we use Psotive or Negative Time Mngt

    Dear All,
    How does the system identifies whether we use Psotive or Negative Time Management.
    Appreciate your early response.
    Regards
    Rajesh

    Hi
    1. In positive time management we record the actual time of the employee working in organization and following are the infotypes we need to maintain in master data,
              1. Organztion Assignement [0001]
              2. Personal Data [0002]
              3. Absence Quota [2006]
              4. Planed working time [0007] with the time management status " if you are using PDC then "2" " Or "1. Time evaluation actual time".
              5. Time Recording Info [0050]
    2. In Negative time management we are only recording the time deviation like "Absence, Illness, Leave" and following are the Infotype we need to maintain in master data,
             0001, 0002,0007 with time management status "0" i.e No time evaluation and 2006.
    Best of Luck
    Swapnil

  • How does the system calculate taxes?

    Dear All,
    How does the system calculate taxes?
    Can anybody explain in detail how the values will flow from PB00 / PBXX to BASB ?
    Is this flow will remains same in both deductible & non deductible taxes ..??
    Pls explain
    With Regds

    Hi
    Just remove the base type 362 in the taxing procedure & check if your tax is calculating or not.
    The Tax determination still works.
    FORM FRM_KOND_BASIS_362.
    *Application country specific
    *This alternate base value is to be attached to BASB. This routine
    *fetches KZWI6 captured in the pricing procedure.
    Thanks & Regards
    Kishore

  • How does the system decide where to put a file on the desktop?

    So you've just created some sort of file, and you choose to save it to the desktop.   A second later--presto!--the file icon appears on the screen.
    How does the computer decide where on the desktop to put that icon?

    I'm not 100% on this, but I think the system will save files to the last destination you nominated unless you designate another destination at the point of saving. I guess you previously saved something to the Desktop.
    Just tested it on my two Macs and that's how it behaves here.

  • How does the system Validyne pressure transducer -- Validyne CD280-Dual-- SCB-68-- PCI-6024E-- LABVIEW work and how can we calibrate the pressure transducer?

    Hello there,
    I am completely new to the LABVIEW software.
    I am learning an existing LABVIEW code of my pressure acquisition system (attached) which has the data path as following: Validyne pressure transducer --> Validyne CD280-Dual--> SCB-68--> PCI-6024E--> LABVIEW and I have some question:
    1. How does the complete system from transducer to the LABVIEW work? ie if we apply the pressure at the transducer, it will change the resistance of the transducer then ....?
    2. How can I find the equation which express the relationship between the pressure and the voltage at the oupt of the Validyne CD280-Dual in the LABVIEW?
    3. If I want to do the calibration for the transducer, what are steps?
    Thanks,
    Solved!
    Go to Solution.
    Attachments:
    Experiment.vi ‏143 KB
    Plogger.vi ‏21 KB

    Hello there,
    I do not understand what subVIs you are refering to but I have tried to run the LABVIEW program using the files I attached and it worked fine (pls see the attached pressure plot).
    As I mentined before, I am new to LABVIEW so maybe I do not know.
    Thanks,
    Attachments:
    Pressure plot.jpg ‏111 KB

  • How does the system calculate the Taxes?

    Dear all friends,
    How does the SAP system calculate the Taxes?
    pls. explain with the example will be highly appreciable.
    thanx in advance to all
    best regards,
    Rajesh

    Hello
    The SAP system calculates tax based on the tax calculation procedure assigned to your country in OBBG.
    The tax calculation procedure is similar to the pricing procedure in materials management.
    As you have different pricing elements like gross price,discounts,freight charges, etc in pricing procedure, you will have different tax elements like Excise duty,Special excise duty,Cess,Edu cess,VAT,CST, etc in tax calculation procedure.
    At the time of PO creation, the tax base amount is communicated to the tax calculation procedure from the pricing procedure.
    And the tax values are calculated based on that and how you have configured your tax calculation procedure.
    In CIN, we have two tax calculation procedures
    TAXINJ which can be formula based or condition based and TAXINN which is condition based.
    In TAXINN, the tax percentages are picked from the condition records maintained.
    But in TAXINJ, it can be either from the condition records or the tax % given in the tax codes in FTXP. It depends on how you configure your system.
    Hope this helps
    Regards
    Gregory Mathews

  • How does the System.in.read() works?

    Hi!I'm trying to read some chars from the console.So here is my code of reading the two chars:
           char ch1='\u0000';
           char ch2='\u0000';
           System.out.print("Enter the first char:");
           ch1=(char)System.in.read();
           System.in.read();
           System.out.print("Enter the second char:");
           ch2=(char)System.in.read();
           System.out.println("You have typed the following letters:"+ch1+" , "+ch2);My problem is that if I don't add the System.in.read(); line after reading the first char i wont be able to read the second.But I saw on a code on the net that they put it.So I've put it too but don't understand what it does.I mean the System.in.read(); function reads until it gets -1.But in my case it's gonna get '\n'.So how does this function works?Thank you!
    Edited by: jcoder86 on Oct 9, 2009 5:36 AM

    jcoder86 wrote:
    Hi!I'm trying to read some chars from the console.So here is my code of reading the two chars:
    char ch1='\u0000';
    char ch2='\u0000';
    System.out.print("Enter the first char:");
    ch1=(char)System.in.read();
    System.in.read();
    System.out.print("Enter the second char:");
    ch2=(char)System.in.read();
    System.out.println("You have typed the following letters:"+ch1+" , "+ch2);My problem is that if I don't add the System.in.read(); line after reading the first char i wont be able to read the second.But I saw on a code on the net that they put it.So I've put it too but don't understand what it does.I mean the System.in.read(); function reads until it gets -1.But in my case it's gonna get '\n'.So how does this function works?Thank you!
    Edited by: jcoder86 on Oct 9, 2009 5:36 AMThat's wrong. System.in.read() reads a byte from the stream. -1 is returned if the end of stream has been reached (that usually doesn't happen if you read from stdin)
    The second System.in.read() is there to throw away the line terminator.

  • How does XI system know the related CMS hostname?

    Hi mates,
    We ran into an issue using CMS. We are in the process of upgrade to PI 7.0.
    We had the CMS on our DEV system and the CMS Tracks page has the following details.
    <b>CMS on Dev</b>
    <i>DEV URL: DEV
    QA URL: QA
    PRD URL: PRD</i>
    In this process of upgrade, we copied our DEV system along with CMS on to EVAL. Before we upgrade DEV box, we tested the CMS that is copied on to EVAL. So we set the following on EVAL CMS
    <b>CMS on EVAL</b>
    <i>DEV URL: EVAL
    QA URL: DEV
    PRD URL: <NONE></i>
    We made sure that CMS service user & pwd are correct and exported a namespace from EVAL. Expectedly, it landed in DEV system. It worked fine.
    Now, we had an emergency transport to be sent to PRD, so we have to do it using DEV CMS as PRD is specified there only. Before we did this, we removed the settings from EVAL CMS.(QA URL: DEV)
    But, when we export the namespace from DEV, the transport goes in to status 'Waiting for Export' and doesnt appear in the consolidation tab of DEV CMS.
    We tried to click on the button 'Update CMS', but it did not work. We are wondering if DEV system still assuming that it is linked to EVAL CMS. Do we explicitly specify the CMS hostname for an XI environment (in exchange profile or somewhere else)? Or, does the XI system determine it at runtime?
    Please help me in understanding this flow logic between CMS & XI. I highly appreciate your inputs.
    Hope I'm clear, let me know if you have questions.
    The last thing we want to do is restore the DEV box using the back-up copy.
    thx in adv
    praveen

    Rama Krishna,
    > it doesn't make any meaning if we install XI and ask
    > to USE CMS of different HOSTNAME.(like specifying CMS
    > DEV as "QUALITY").
    As I said earlier, not all the XI systems in the landscape have a "separate" CMS. They all are connected to one CMS...it can either be on the same box as XI DEV or XI QA or PRD or Soln. Mngr. Hope you understand this.
    Now, my question is...for an XI box should I "explicitly" specify the host name of the CMS?
    eg. in my case, I've the CMS on the same box as XI DEV. Now, do I need to explicitly specify the CMS hostname (i.e. hostname of XI DEV) in exchange profile of XI QA & XI PRD?
    Coming to the DEV URL, QA URL & PRD URL, I'm talking about setting these values in the 'Tracks' tab. Please refer to pg 31 of <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306">How To Transport XI Content Using CMS</a>
    > XI implictly takes local HostName for CMS.
    if this is the case, that means XI DEV, XI QA & XI PRD will have separate CMS...sicne each one uses the CMS on the localbox as you say.
    Somehow each XI box is told the CMS hostname.
    Am I clear?
    praveen

  • How does the scrollbar know which field it lands on?

    Hi all
    I'm looking at components at the moment. Not how to use them
    but how to create them yourself to increase your workflow.
    When dragging a scroll component on to a dynamic textfield it
    automatically determines which field it land on, and populate the
    targetInstanceName variable in the property inspector.
    How does it do that? I guess it's a jsfl file being run, but
    I can't figure out how to run a jsfl file the moment the user let
    go on the component.
    Thanks in advance,
    Jakob

    Hi Antony,
    There is no need of Sender Agreement and hence sender communication channel. Sender Agreement identifies three things,
    Namespace, Software component version and Outbound Interface. In Idoc communcation there is no need of Sender agreement as we can identify above things without Sender Agreement itself like namespace - Idocs have standard namespace and can be accessed across the sofwatware component versionsn and the idoc type it self specifies the interface name.
    You cannot define a sender IDOC channel in Integration Directory due to fact dat IDOC adapter does not run in J2EE AF but is an 'built in" adapter.
    Thanks,
    Vijay Kumar T.

  • How does the system get the page format in reports

    Hi to all experts,
    where does the report gets the page format while print how do default the page format to the report while printing...
    please help

    Hi Mohamad,
    For printing reports by default it ill take the page format assigned to the printing device like (locl), in print preview,
    u can check the same in Transaction : SPAD.
    there click on output devices ->click on devices which u r using-->
    click on last tab->field(TRAY1)--->there u can find the page format for tht printer.
    U can change that as per ur requirement.
    i hope it ill sovle ur prob.
    Regards,
    Niranjan.G

  • HOW DOES THE SYSTEM CALCULATES THE TAXES

    Hello Experts,
    Tell me the method of calculating taxes  pricing procedure in purchase order.
    Thanks and Regards
    Nilu S.

    hi
    calculation process is as follows
    PB00 Gross Price (info record, contract, scheduled Agreement)
    PBXX Gross Price (PO)
    FRA1 Freight
    RA00 Discount on net
    RA01 Discount on Gross
    ZA00 Surcharge on net
    SKT0 Surcharge / discount
    ZPB0 Rebates
    MWVS Input Tax
    MWAS Output Tax
    BASB Base Amount
    RM0000 Calculation Schema or Pricing Procedure
    (PB00 & PBXX)
    RM0002 Calculation Schema or Pricing Procedure
    (PB00)
    PB00 --> AB00
    Copy the Standard one and create new one (ours)
    RM0000 contains all the condition types
    Regards
    ronny

Maybe you are looking for

  • Adobe Muse page is shifting to the left

    Hello, I love Adobe Muse and have been using it for some time now. I HAVE had this problem before but it was due to elements being placed outside of the page area, so of course I investigated that first. Unfortunately, I'm still having that problem a

  • Multiple Line Graph

    First off, thanks to kglad for the line graph function I started with, it has been a huge help. Now the step I'm trying to take is 2 fold. First, I'd like to graph more than one line segment on the graph. Right now I am graphing functions f1 and f2,

  • An unexpected error occurred I -200 in Muse.

    I have reset password as well as followed all instructions here http://helpx.adobe.com/muse/kb/unexpected-error-occurred-i-200.html now I cannot even use Muse

  • How to decrease photo frame width in photoshop?

    hi guys i have a small question to ask to the experts....i want to decrease the width of a wooden frame psd file to suit my design "the frame is so thick" simply scaling it down wont do the trick beacuase i will have only small version of it and i wa

  • Music in iTunes Speeds Up When Certain Programs Run

    Like the title says, sometimes, when I run certain programs and iTunes simultaneously, the music in iTunes starts to automatically play as if in fast-forward, but as soon as I close the program, the music starts playing fine again. Is there a solutio