How does the value filled in Appointment Date field reflect in IE_SHIPMENTSTATUS table?

Hi Team,
Just wanted to know : How does the value filled in Appointment Date field reflect in IE_SHIPMENTSTATUS table in OTM.
Please help.
Regards,
John

Sorry, wrong forum: created in ABAP forum instead.

Similar Messages

How does the values in tcode F.27is retrieved?

Hello,
I would like to ask how the value in F.27 is retrieved when I have filtered it base on the ff:
Company code
Account
Indicator in master record
Key dates for acct statement (i.e. dec 1, 2009 to Dec 31, 2009)
When I filtered it base on the above, I noticed that there is a discrepancy on the opening balance. Upon my investigation, I saw that the discrepancy was due to the previous open balance which was dated April 2004, that was added to the opening balance
that fall on the date i put as key dates for acct statement. Do you know as to why it has added the previous open balance which is outside the specified scope? If so, can you let me know how to correct it?
Thanks and your advice would be greatly appreciated.
Kindest regards,
Lem

Hi Vishnu,
Please check the settings in user profile.
Regards,
Madhu.

How does the value for "Escalated incidents" in the KPI report work?

Hello,
I've been running the standard KPI report in SCSM for our support groups and noticed that the value of "Number of incidents" in some cases are lower than the value for "Escalated incidents". How could this happen? Isn't "Number of
incidents" the total and "Escalated incidents" just an indication of how many of the total that have been escalated? Do I need to add them together to get the total?
It could be noted that we tick the check-box in the incident form manually without any connection to SLO.
Am I missing something? Any suggestions would be appreciated. :)
Best regards,
Marcus

>If you can't deactivate ahead of time, you can contact Adobe Customer Care to help you. But like I said, you can install on up to 2 devices. I think if you try to install on a 3rd device, your other 2 get deactivated automatically. So even if you have to format C, you'll still be able to get up and running pretty quickly.
Great, thank you.
>Perpetual License means "yours to use for as long as your operating system can run it." CS6 is almost 3 years old and no longer being updated. It is what it is. Presently, 4 versions back from the currently available Creative Cloud version.
Too bad they went to a dumb subscription based model that doesn't allow you to purchase a full license outright. I don't want to pay $30 a month, I'd rather pay a lump sum and be done with it.

How does the netweaver refresh view's data?

hello,every body,I'm a freshman in sap,so I have a simple question:
from the tutorial in the netweaver help contents,I learn we can navigate views by using links,but if there is only one view to be shown,how can I refresh the view?
for example,in the SAP netWeaver Developer Studio's Help archive,the example,who's address is "SAP NetWeaver Developer Studio Documentation /Java Development Manual/Go and Create/Using the Car Rental Web Service with Web Dynpro",just uses one view,and fresh it's data,but I can not understand how it realize this action.

Hi..
Please have a look on below link
web services creation --- https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1781d6fa-0701-0010-0db1-c8ae13da5716
web dynpro --https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2d78d3fa-0701-0010-a6a4-f2fc572fe3d6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/b189f988-0701-0010-8a91-a04696b74998
If found suitable, let me know.
Cheers,
Amit lal

How does the GR processing time affect the scheduling of the process order & the latest start date in the operation.

Hi
Can anyone explain how does the GR processing time affect the scheduling of the process order & the latest start date in the operation overview.

Hi
GR processing time means number of workdays required after receiving the material in storage.
Check this link:GR Processing time
Regards,
Anupam Sharma

How does the attribute gets the data from R/3 field?

Hi Experts,
It could be silly Q. IO has attributes x, y, z....... When we map r/3 field to IO, and it is added to the cube and when we create a report, how does the attribute gets data? I've been working in BW and suddenly I got confused. Someone please provide me some info
Thanks,
Radha

X,Y,Z being attributes of an info object A.
When A gets loaded it will be loaded with X,Y,Z.
If A is a cube and if you wish you can bring X,Y,Z also in the cube in one or more dimensions.
If you keep X,Y,Z as vag attributes rather than in te cube as dimensions, then , the system will generate SIDs for them.
Ravi Thothadri

How does the ask-to-buy notification determine which organizer's device to send it to? I keep receiving notifications on my ipad but not my iphone. my ipad does not have a data plan so if i'm not on wireless, i don't receive any notifications.

How does the Family Share ask-to-buy notification determine which organizer's device to send it to? I keep receiving notifications on my iPad, but not on my iPhone. My iPad does not have a data plan so if I'm not on wireless, I don't receive any notifications.

Did you ever receive a solution for this issue?

How does the field CCSOFTLOCK in T000 Table get Updated ?

Hello Experts !
I would like to know how does the field CCSOFTLOCK in Table T000 Get updated ?
I tried all fields in SCC4 for a client but none of my change updates CCSOFTLOCK .
The Data Element Description says   Client control: Soft Lock Required (Planned for 4.0)
What does this Planned for 4.0 Indicate. We are in ECC5.0.System.
Regards,
Mithun Shetty

Hi Mithun,
Can you check if Note "1047952 - SCC4: Client settings with enhanced security options "is applied to your system.
as per it , you can put additional restrtictions for modifying SCC4 (table T000) fields ,a BadI will be checked additionally.
15. Parameter : CCCOPYLOCK_VAL_DEFAULT
       Type      : Exporting
       Pass Value : Check
       Optional : Space
       Associated type: TYPE
       Reference Type : CCSOFTLOCK
Regards,

How does the Concurrent Access License (CAL) work.

Description from Google: How does the Concurrent Access License (CAL) work? Xcelsius Engage Server CALs allow for concurrent live data updates inside Xcelsius dashboards. Every time an end-user triggers a Web service inside an Xcelsius dashboard to retrieve live data, a CAL is consumed for a period of 5 minutes. For that period, in a five CAL deployment for example, there will be only four CALs left for consumption. A five CAL deployment could support up to 25 users and additional CALs can be added to support a larger deployment.
My question is as follows:
How a five CAL deployment could support up to 25 users and what does it mean. In the first line it is saying that each CAL for a web service is consumed for a period of 5 minutes and how come it can support 25 users concurrently. Did it mean 25 web service connections inside a swf flash file or 25 different users to access a single web service through swf flash.

The "Set cost controls" concurrent program is used in R12 to mass update the cost control fields on item costs.
The cost control region is found by going to Cost management >Item costs > Item Costs
The concurrent program lets you specify which items /costs should be updated by using various parameters such as cost type, item range, category range etc.
And you can specify the source for the new cost control data and the new value for the fields.
Hope this answers your question,
Sandeep Gandhi

Transfer Rules: How does the mapping work?

Transfer Rules: How does the mapping work?
Is there a document out there that explains the following or can someone help clarify it for me. I have some confusion on what is really going on.
When I create an InfoSource (IS_Test) as a Flexible update and then Assign DataSource (DS_Test) and I respond Yes, to the message DataSource assignment DS_Test to InfoSource IS_Test Save
a) Under Transfer_Structure/Transfer_Rules in the InfoSource
1) the Transfer Rules tab, what are the fields found in the right column (Assigned InfObjct-field)? And where do the fields you enter in the left column (Communication Str/Transfer rules) eventually go?
2) the DataSource /Trans. Structure tab, can I always assume that all the fields in the right column (DataSource) came from DS_Test? The left column (Transfer Structure), in my test was exactly the same as on the right. Where do these fields eventually go?
b) Under Communication_Struct., in the InfoSource
3. the right column (ISource Fileds) where from those InfoObjects. if I am now creating my InfoSource. Where did they come from?
4. The left column is Communication Structure, which at this point has no InfoObjects, if I move a couple of InfoObjects from the right to the left, where do these Objects in the left eventually go?
5. what is the relationship between the Communication Structure in 4 and 1? Or any relationship between a) and b) as a whole?
Thanks.

Hi Caud,
As Ashish pointed out, communication structure contains fields (infoobjects) that suppose to go to data targets. Which IO in CS to which IO in the data target will go (and what transformation of data may occur) is determined in URs of the data target.
The transfer structure is the structure in which the data is transported from the source system into BW:
http://help.sap.com/saphelp_bw33/helpdata/en/3f/0e503c3c0d563de10000000a114084/frameset.htm
In Transfer_Structure/Transfer_Rules in the IS, DataSource /Trans. Structure tab, right part shows fields in the Datasource, the left part fields in the transfer structure. There is also a transfer structure in R/3 for a given DS. Transfer structure in BW is created identical to the TS in R/3 during TRs activation.
During data load data are transferred 1:1 from TS in R/3 to TS in BW.
TS in BW corresponds to the PSA table structure.
How data from PSA are transferred to the CS is determined in TRs.
The 3rd column (Field) (Transfer Rules tab, right part (Assigned InfObjct-field)), contains field names of the DS (TS); and the 1st column shows IO in the CS to which the DS field will go. So, its a mapping DS filed -> CS field.
The left part (Communication str./Transfer rules) is always identical to the CS content. But the 4th column (Tp) shows possible data transformation during transfer from PSA to CS. If this column contains a yellow triangle then there is no transformation (Value of DS field will go to value of CS field). If there is a red cross, it means that no data for this CS field is supplied from a DS. You can click on this yellow triangle and choose: 1). Another field from a DS; 2). Constant; 3). ABAP routine; 4). Formula. So, here you can determine the data transformation. Moreover, there is a possibility to create a start routine (blank sheet icon at the top).
And finally, here are the answers on your questions:
Q:
a) Under Transfer_Structure/Transfer_Rules in the InfoSource
1) the Transfer Rules tab, what are the fields found in the right column (Assigned InfObjct-field)? And where do the fields you enter in the left column (Communication Str/Transfer rules) eventually go?
A: Right part shows a mapping between DS and CS fields. Left part shows CS fields and data transformation (TRs) during data transfer from TS (PSA) to the CS. These are fields in the CS that will go to data target and which are fed from a TS (DS).
Q: 2) the DataSource /Trans. Structure tab, can I always assume that all the fields in the right column (DataSource) came from DS_Test?
A: Yes, you are right.
Q: The left column (Transfer Structure), in my test was exactly the same as on the right. Where do these fields eventually go?
A: As I described, left and right parts are identical. These fields will go to CS.
Q: b) Under Communication_Struct., in the InfoSource
3. the right column (ISource Fileds) where from those InfoObjects. if I am now creating my InfoSource. Where did they come from?
A: these are fields from an IS template, the name of this template you can see above this right part. Actually, during IS (CS) creation you can choose different templates and choose fields from them transferring them into the left part.
Q: 4. The left column is Communication Structure, which at this point has no InfoObjects, if I move a couple of InfoObjects from the right to the left, where do these Objects in the left eventually go?
A: these are fields of CS (left part) and as I said before they will go to data target.
Q: 5. what is the relationship between the Communication Structure in 4 and 1? Or any relationship between a) and b) as a whole?
A: CS in 4 just shows IOs that will be transferred to data target. CS in 1 also shows how values for CS IOs are to be fed and transformed.
Best regards,
Eugene
Message was edited by: Eugene Khusainov

KPI -How does the periodicity works in SM

Periodicity is @ Context level only? That means we have to define different contexts for weekly &monthly? That doesnu2019t fly good
How does the periodicity works in SM..data entry as well as frontend display?

Hi TR,
When looking at a scorecard, you should see the status for all objectives and KPIs during the same time period. If you look at Revenue KPIs for just one week and Cost KPIs for the whole month, how can you assess how you performed in that month?
This doesn't mean that the metrics in PAS cannot have different periodicities. They can! But when looking at data in the scorecard these periodicities will be converted to the scorecard periodicity. For example if you have monthly metrics and you are looking at scorecard data quarterly, the scorecard will show you the value for the 3 months of that quarter. Here, you should take care to define the proper time consolidation properties for the metric (it can be SUM, like in costs or revenue, AVERAGE, LAST, FIRST...).
Likewise, if you have quarterly metrics and you want to see scorecard data monthly, then PAS does a breakdown of the value per months.
Anyway, if you are looking to setup a weekly scorecard, that will likely include a different set of metrics that a monthly scorecard would. Weekly scorecards will problably include more operational metrics and will lack the strategic focus of scorecards with a broader time scope.
Regards!
Ricardo

Where does the Value of EECST gets stored

Hi,
Where does the value of EECST gets stored for the infotype p0167. How can it be retrieved from that specific infotype. - Urgent issue.
Thanks........
sk

hi,
what is EECST?
there is no such field in data dictionary.
plz specify properly or atleast u give the name of field in general that is used in pa0167 infotype so that we can help u.

How does the Delta functionality works while updating Infocube from PA

Hi Gurus
How does the Delta functionality works when you send forecast to the Info cube from the Planning Area.
As I have weekly based planning, every week we have to update the forecast into the Cube. If I update every week into the Cube , then the values are going to append in the Info cube.
Shall I create ODS in between the Planning area and the Info cube .
(or)
Any other method ?
Please Suggest.

Hi Preetham,
Data Extraction from planning area to infocube usually its supports for full update only, when u r going to load the data from planning area to cube ,it deletes the previous data and u vil get the fresh data, this is the best method performance wise,
if u want to use the delta functionality u can go for planning area to Dso, Dso to cube, it vil supports the delta functionality, but it vil degrades the system performance,
regards
ravi

X120e HDMI - 27" LED LCD @ 1920x1080 - how does the image look?

Hi All,
Since that my X120e is not compatible w/ my Dell 30" DVI-D dual link display, I'm about to invest in a 27" LED LCD w/ HDMI input. If you're using the X120e on a 27" @ 1920x1080 via HDMI too, may I ask how does the image look to you?
Can people even tell that all that images/video come from a lil' laptop?
I asked cos' as we all agree that X120e's built-in display is a lil' on the weak side, I wonder if this carries onto an external display too or not. Speaking of which, ever since I downloaded all latest drivers (as late as last night), my X120e's picture quality is now noticeably better, have you guys noticed this too? And I haven't even used Microsoft's picture calibration software yet cos' last time I used it, all grey areas looked pinkish.
Thanks.

Yeah, as ColonelONeill said, the picture qualities are independent.
Most likely, if you encounter any picture quality issue on the external, it's going to be due to picture options on that monitor itself (color temperature, brightness, contrast, sharpness, etc. etc.) that can be adjusted independent of any setting that the computer has. Any calibration tool software on the PC only adjusts how the data is sent out to the monitor in question. Hardware + Software calibration tools are considerably more reliable because they can take into account the settings on the monitor itself. Sadly one can't adjust the laptop's screen's settings itself.
If you're going to use the HDMI connection, don't forget to go into your Catalyst Control Center and adjust the overscan / underscan setting to get the image to fill up your monitor's screen. AMD sets the overscan / underscan option to default with a slight border around the desktop. This in turn can cause a sort of blurriness because the pixels on the monitor is not 1:1 to the pixels that the laptop is outputting (1920 x 1080 resolution being fit into a 1820 x 980 resolution with a 50 pixel black border, for example).
P.S. the Overscan / Underscan option only shows up in CCC if you have the device connected through HDMI.
For a compilation of most X120e issues:
Compilation of Lenovo X120e issues and solutions

How does the widgets HTML snippet work on iweb?

How does the widgets HTML nippet work on Iweb? and when should you use it?

Joe R wrote:
I'm creating Tool Tip definitions for the Operators in the Filter on the Interactive Reports. I was looking for a definition for the 'Contains' operator and from what I've found this operator is used to do a text search and it returns a relevance score for every row selected.The IR "Contains" filter is not the same as the Oracle Text <tt>contains</tt> operator.
The IR "Contains" filter performs a simple string comparison on all of the column values returned. It does not make use of any Oracle Text indexes on the underlying data.
Despite < a href="https://forums.oracle.com/forums/thread.jspa?messageID=2434666">vague promises of enhancement</a>, no Oracle Text support has yet been included in Interactive Reports.

How does the value filled in Appointment Date field reflect in IE_SHIPMENTSTATUS table?

Similar Messages

Maybe you are looking for