How dunning area derived from sales area

Dear Guru,
When you press F1 on dunning area, you will get the following:
Dependencies
The dunning area must be noted in the line items. As long as documents are copied from preliminary work areas (billing documents), the dunning area can be derived from details such as division or sales area, if necessary.
Here i want to know any IMG setting to set dunnign area derived from sales area?
The reason is that I noticed that in BSEG table, those Sale billing document with dunning area = blank. could anybody tell me the following
1) any duning area derivation in IMG need to set, eg, dunning are derived from division/sales area
2) which table, the dunning are is noted for billing document from sales side.
Thanks,
Kick

Hiya,
One assigns the Dunning Area to the Sales Area in table TVTA.
In IMG, follow the path:
Sales & Distribution --> Basic Functions --> Account Assignment/Costing --> Assign Dunning Areas
This is again based on requirement. You normally assign Dunning Areas to the Company Code.
Hope this helps.
Cheers.

Similar Messages

No functional area derived from GL account and cost center ccombination sel

Hi,
When doing a goods issue for a delivery, am getting this error. Hope somebody could advice.
"No functional area derived from GL account and cost center combination selected."

Hi,
Go to FS00 and specify the functional area for the gl account. Go cost center change mode specify the functional area. Define the f area in Tcode OKBD, FSP2,KA02,KS12,
Hope this is clear, if yes assign points
Regards,
Sankar

Org determination from Sales area

Guys,
Here's the scenario..we have downloaded all Org structure from R/3. I need the sales org, sales office & group to be determined from the sales area maintained in the BP master data. Currently all BP's have only one Sales Area assigned.
The structure looks like this ..
XY10 - Sales Org Unit
   XA01 - Sales Office
        XG01 - Sales Group
        XG02 - Sales Group
I have checked all of them as Object Permitted in determination. (well if I don't ..then they are not available for selection while maintaining sales area data for BP). I am using the standard Rule '10000144' (Sales area Inc Master Data'). the problem is automatic Determination is failing because its proposing all the Sales offices & sales group as well for Sales Org.
How do I make it to select the one Sales Org only? the same determination should also work when I create and replicate a Sales order from R/3.
Another issue. When I did a consistency check(For Obj permitted in determination) for the Sales office(XA01), I get a error "Attribute IS_SA_ORG can only be assigned once within the assignment hierarchy".
Any suggestions on how to overcome the above issues?
(Note: I am already aware of the buffer update report 'HRBCI_ATTRIBUTES_BUFFER_UPDATE' and I run it every time I make any change.)
Thanks,
Reddy

Guys,
I have created my own rule and it works sucsessully. i still have the consistency check for one of the Sales Office.
Here's my new problem. When I download the sales order from R/3, it determines the Sales Org but is unable to determine Org unit. (If you look in Org tab of sales order, the Sales Org & Org Unit are two different fields). I looked at the log and found that for some reason its finding more than one Org unit!
I tried to create a new Order in CRM with the same BP and the rule works perfectly and only one org unit is found. So for some reason the rule evaluation fails for downloaded orders
Is there any note or setting that I am missing?
Would appreciate any help in this regard.

Create PR00 from existing Sales area to new Sales Area

Hi.
I have an existing sales area S001 SA.
I wanted to copy my condition type PR00 from S001 SA to a new DC S001 SB.
Is there a tools to mass copy the condition records?
can someone explain how VK14 helps in this case?
Thanks

Hi
The ABAPer for making a copy of reports RV45* is if you need to copy a field in the second step no covered by the standard fields. What is the tables in the determination of PR00. Please, see in V/06 the sequence access and check the tables in V/07. And do the proper customizing if you have changed the customizing.
See the reports availables.
If you need to copy a different field (in tables A+++), then create your own ZRV15CC* using one of the former reports as a template.
I hope this helps you
Regards
eduardo

Profit center derived from business area

Hello,
We are having a problem with one of our business areas. We are posting F-53 disbursements from a custom program (using a BDC). When we fill in the initial screen, we currently fill the business area field (GSBER). The profit center (PRCTR) is then derived from the business area. This is working for all of our business areas except one. For this one particular business area, an invalid profit center (one that doesn't exist) is somehow being derived. Where is the derivation determined? I've seen transactions 3KEH, 3KEI, and 1KE4 all mentioned in reference to derivation rules; unfortunately I can't access any of these (no authorization), so I can't even look to see whether we have any entries there or if those transactions are relevant to this problem. If someone can tell me which transaction or table would control the business area to profit center derivation, I can at least have someone with the correct authorizations take a look. I was able to look in FMDERIVE, and I don't see any relevant strategies there.
Thanks,
April Erickson
Solved: Entries were in 3KEI. The entries there had been moved to test and production, but the corresponding profit center entry in CEPC had not.
Edited by: April Erickson on Feb 11, 2009 5:07 PM

Hi sachin
Documnet type RE is given business transaction varaint 'vendor invoice'.
In this input tax account item category is assigned in the splitting rule.
In fact, system inherits BA and PC from opposite line item.
But when we substitute other PC in input tax account then the system stops inheriting for BA also.
So, my question is whether inheritance will apply to all characteristics only or it can be applied for one characteristic ( BA) and other charactriestic PC can be derived in another way using substitution.
Regards
S.Radhakrishnan

Displaying different currency(different from sales area data) in Web shop

Hi
I have a B2B scenario where only one sales area is maintained for the sold to party. And the currency is maintained for the sold to party is USD.
the requirement is to show a different display currency(EUR) for contact persons of the sold to party ordering through webshop.
I have tried changing the Product catalog variant currency, also added the currency 2 field in the product catalog variant.
But the currency is still being picked from the Sold to party sales area master data. I am not able to figure out any usage of currency 2.
Is there any other workaround available to display a different currency? (I am ruling out the option of Creation of new sale area as thats not possible in this scenario)
regards
Subhasis

Subhasis,
I think you have to maintain the different currencies in customer master data.
If it is not possible you can do the following method.
Create a custom field to show different currencies after selecting the currencies convert that into the currency which is maintained in the customer master data.
Thanks and Regards
shanto aloor

How to update the pricing, sales area details in Campaign

Hi All,
I need to create a campaign in CRM through program. For the same I have created it using the below:
1. create a Profle set using "'BAPI_PROFILESET_CREATE' with the appropriate "segmenttype".
2. create a target group using " BAPI_TARGETGROUP_CREATE" based on the Profileset guid.
3. assign Target group to Market element calling the FM"MKTPL_TGGR_ASSIGN_CREATE".
I need to assign the pricing amount , sales area data and the product to the campaign. Could you let me know the name of a Bapi/FM to update the same.
Thanks,

Hi,
Can you check if these FM's are useful:
CRM_MKTPL_GET_BP_SALES_AREAS
CRM_MKTPL_AL_FILL_PRODUCT
Hope this helps.
Regards,
Anup

Get sales office from sales area

Hi gurus
I'm looking for a FM or METHOD for get all the sales office linked at one sales area....
somebody can help me??
regards
Marco

Hi RAJ.
thanks for your reply.
I no need the mapping trought the two system.
I need only of the mapping trought sales area and sales office in CRM....
thanks
Marco
Edited by: Menegazzo Marco on Jul 5, 2010 3:46 PM
Edited by: Menegazzo Marco on Jul 6, 2010 9:36 AM

How to retrun goods from sales order (OPM 11.5.2)

Dear all
Have anybody know how to return stock from the OPM order fulfillment module? Please guide me the step and procedure.
I have read the OPM user guide no return stock but I applied by using the quantity form and reason code to identify the sale order return mapping account to subledger.
Thanks in advance
CC.

Dear all
Have anybody know how to return stock from the OPM order fulfillment module? Please guide me the step and procedure.
I have read the OPM user guide no return stock but I applied by using the quantity form and reason code to identify the sale order return mapping account to subledger.
Thanks in advance
CC.

HT5557 Why is British Columbia sales tax being charged on iBooks when BC's own documentation says that electronic books are exempt from sales tax?

I recently bought a book on iBooks and on the invoice realized that provincial sales tax (pst) was charge. As I knew books were pst exempt, I went to look at the government's website to see if they mention electronic books. I found the aptly named "What's taxable and what's not" (http://www2.gov.bc.ca/assets/gov/topic/BED47DA4EBDBA60A5F28622B8B2E1451/uploads/ whats_taxable_whats_not.pdf) and started looking. On the first page, it distinctly says electronic books are exempt.
So, my question is - why are we getting charged tax when our government says that electronic books are tax exempt?

no, that's not a reason you would use a class file.
anyway, your document class variables are defined on the main timeline so to reference them from any timeline you can use:
MovieClip(root).w36; // for example (but it's really undesirable to have coding in more than one timeline)

Function Area derive from cost center

Hi, here is a question.
The function area was input in the cost center master data. Cost center A ( Function area 1000), Cost center B (Function area 2000)
Then creat a PO with Account Assignment Category(K), Item Category (B), input the cost center A in the PO.
When I do MIRO, I change the cost center (A TO B), but the function is still 1000, not change to 2000. But if I delete the Function area in MIRO first, then change the cost center, the function area update to 2000.
There is no default function area in GL account and cost element, also no substitution.
Is it standard in SAP? I want the Function area can be updated with the cost center. Any method?

Here is what SAP help says about this.
Functional area field for postings - ready for input?
You can enter the functional area directly when entering G/L account postings, provided the "Functional area" field is shown in the field status group of the G/L account.
SAP recommends that you do not show the "Functional area" field in the field status group of the G/L account, but rather that you have the system determine the functional area of the account assignment. This eliminates the risk of the user entering incorrect functional areas.
You said you have functional area in cost center master data. When you post documents, do you get func. area from the cost center automatically or not?

PLD. How to transfer value from Repetetive area to Start of Report

Hi.
Is it possible to get data fromfield in Repetetive Area to field Start of Report. I need to get value of some user field in Start of Report. I can get it in Repeptetive area but I can't in Start of Report.
With regards,
Maxim Grunis

Hi Maxim Grunis,
The answer is: there are no way to transfer them. PLD works from top down to the end of report. It is building printing file on the fly. The Start of Report know nothing about the other areas.
Thanks,
Gordon

FA segment derivation from business area substitution not working for AFABN

Hello Gurus,
I have a FA substitution of Field 'segment' is substituted by Field BSEG-GSBER.
But its not picking the Business area as Segment for the 'AFABN' postings.
Thanks for your early reply.
Thanks and regards.
Gopa

Hi, AFABF it's depriciation?
Try do it with tcode obbh.
And if you have some problems with substitution simulate it for inspection

How Variant Configuraton data from Sales Order stored in the database

Hi,
I understand that the "variant configuration" data (chosen values for each characteristics assigned to material) from a sales order is stored separately with reference of an object in SAP.
Please let me know how SAP stores such data -source in the database tables.
This is required to draw a report of these charateristics values for various sales orders (Transactional data).
I also understand that there are function modules to retrieve this data, but the function modules are unable to retrieve data as accurately as the VA03 program.
Thank you for your advice.
Regards,
Hemant

Hi ,
I do not know what a reference charactersitcs is,but there are all independant characeristics in terms of their values.
A guess it is because the VC data is changed after the sales order is created, the updated VC data is displayed properly only in VA02 or VA03 but other function modules fail to display the updated VC data.
I understand there is a relationship of instance -between sales order object and VC data object-which we need to update and then see the latest data.
Please let me know if anyone has debgged VA03 to know how the standard SAP program retrieves VC data in a sales order.
Thank you,
Hemant

How to get PO from sales order item in CRM

Hi,
I am building a BI extractor which needs PO for a given complaint. I am able to get the sales order/item for a complaint using crm_order_read FM. Is there anyway to get the PO based on this SO-item. Are their tables that link these two.
Thanks!

Table CRMD_ORDERADM_I -> Give Item GUID in filed GUID and get the document header guid in field HEADER. Then use function module CRM_ORDER_READ and table ET_SALES to get the Sales Data for the right item. The PO you are interested in can be any of the fields related to PO in this set. Usually it is PO_NUMBER_UC.
Alternately, if you want to use only the table reads use this.
1. Table CRMD_LINK --> get the record with GUID = Item GUID and OBJTYPE_SET = 11 (for Sales Set)
2. Table CRMD_SALES --> get the record with GUID = CRMD_LINK-GUID_SET
Get your PO information from this Sales set record for your item. But since, PO is usually associated with the header, you can do the same as above but with the GUID = Header GUID in the CRMD_LINK table.

How dunning area derived from sales area

Similar Messages

Maybe you are looking for