How easy is CAD Integration out-of box

Hi All
I am new to cad integration and we have downloaded Integrators from Service-sap for nx.
1) How easy will it be, the integration to NX system to SAP(out of Box-CD)?
2) Running the Integartion CD..will this automaticly do all the necessary configuration between NX and SAP?
3) How much config Do in GENERAL we have to do? I am only a DMS Business Analyst.
Thank you in advance.
Jim.P

Hello Peter,
Its not just executing the file. There are many other things which have to be done for the NX integrati tork.
You have to import the Table entries and BADIs provided with the installation.
Also you may have to use the templates, configure for title block integration to work.
Plan content server architecture etc...
Most important is you may have to migrate data. Apply many pathces for which you have to contact DSC.
Regards
Prasad K

Similar Messages

How to Strikethrough and Grey Out Check Box

Hello,
This is my first day using LiveCycle. I am trying to make a check box form (upon checking) strikethrough the entire field and grey out. I have the following FormCalc which I know is incomplete. Please help!! Currently the value is just causing my checkmark to turn the color value I've indicated.
(I have these settings Show: Click, Language: FormCalc, Run At: Client)
form1.#subform[0].Subform1.#field[1]
using action:
if ($ == "1") then // checked
form1.#subform[0].Subform1.#field[1].font.lineThrough= "1";
form1.#subform[0].Subform1.#field[1].font.fill.color.value= "91,173,160";
elseform1.#subform[0].Subform1.#field[1].font.lineThrough= "0";
form1.#subform[0].Subform1.#field[1].font.fill.color.value= "0,0,0";
endif

Hi Varma,
That didn't work. Thanks for your help though. I got an error message that says:
Error:accessor
'form1.#subform[0].Subform1.#field[1].ui.textEdit.border.fill.color.value' is unknown

How can I sort and break out a boxed set download

I recently downloaded one of iTunes' full compilations - various artists, 75 songs in total.
There was also an option to buy smaller sets of these at about 20+ songs per individual set, but I went for it all.
Maybe this is too anal, but I was hoping to burn the 75 onto audio CDs in their order/mix of the smaller sets that iTunes had offered. I don't see how I can do that since all I have is 75 songs added to my library on a certain date with no other useful identifier to help segregate them. The track listings and disk # listings apparently only refer to each song's original artist's album (not the iTunes compiled albums).
This box set isn't offered anymore - at least I can't find it (Valentine's Day - Complete Box Set) so I can't tell how the songs were broken out into their smaller sets.
Am I asking for too much, or is there a way to sort these in their intended order that iTunes had set up?
15 FP iMac 800mhz Mac OS X (10.3.9) 1gb RAM; 60gb intl/250gb extl HD
15 FP iMac 800mhz Mac OS X (10.3.9) 1gb RAM; 60gb intl/250gb extl HD
15 FP iMac 800mhz Mac OS X (10.3.9) 1gb RAM; 60gb intl/250gb extl HD

I was mainly looking for an easier way of setting up separate playlists to burn the CDs and not have to select & drag individual songs myself manually. The way they're listed now in my iTunes library is alphabetically by song name, even if I sort by "Date Added".
As for their original order, I've seen iTunes sell compilations like these in subsets such as: "Starter Set", "From Deep in the Vault", "Rarities" or similar categories. If the Music Store had a sales reason to segregate them into specific albums, I assumed (incorrectly) that they would stay in their own 'Albums' once I downloaded them all at once.
Guess I'll just start dragging songs A thru Z over to new playlists and call it good. I appreciate the reply.
15 FP iMac 800mhz Mac OS X (10.3.9) 1gb RAM; 60gb intl/250gb extl HD

How to change font size in a call-out tool box?

Hi, the other day i inserted a call-out tool box in a PDF document, however i cannot find anything that can change the font size of the letters i input in that box. could anyone help? Thanks.
Sherman

This is a question for the Acrobat support forums – please post there.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 23 Nov 2011 10:55:07 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: how to change font size in a call-out tool box?
Re: how to change font size in a call-out tool box?
created by danmarch<http://forums.adobe.com/people/danmarch> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/4043425#4043425

Just took my iPod classic 160GB out of box turned it on and accidently hit clickwheel or button and eveything is in language other than english. How do I get it back to english without being able to read symbols.

just took my iPod classic 160GB out of box, turned it on and accidentially hit a button changing the language from english to something else (chinese or japanese). All I see now is symbols. How do I turn it back to english without knowing what any of these symbols mean. I started clicking buttons and click wheel and can't seem to get to any section with various language options. Please some help me get it back to english.

There are two options. The first is to learn whatever language you have it set to, the second is to find someone else with an iPod Classic and read the English menu and follow it in your iPod. I also believe you may be able to set language perfunces from within iTunes while the iPod is docked, providing they are in English.

How to hide views in a SharePoint2010 list by using out of box solutions only

Hi,
I work on a Time Reporting tool which is used by the users to submit their time sheet twice a month.
The submission of time sheet is done through a MS INFOPATH 2010 form. The data then gets submited to a List named "Time Sheet List".
This list has several important views already existing. These views had been created by the designer (not me) .
Currently if an user submits his/her time report once,then they cannot edit/delete it. Only the admins [Me one of them] can do any kind of modifications.
I am working on giving the users access to edit/delete their own time report for the current month only.
I have created a view "Edit Time Sheet" which will show the user only their own time report for the current month only.
Now the issue is how do i provide permission to the list "Time Sheet List" so that only the "Edit Time Sheet"
view is visible to the users and the other views are hidden from all users except the admins .
If i provide edit permission to the whole list then all of the views will become editable which is not wanted.So, i just want the users to see "Edit Time Sheet" view so that they can only modify their own time sheet for
the curent month.
Please let me know how i can achieve this through out of box solution as i donot have any dev environment installed in my system. I have only MS INFOPATH2010 and SharePoint Designer 2010 in my system.
Regards,
Anena Das

Hi Anena
There is no OOTB approach to achieve the same , one simple work around would be
Edit the view (Site Actions->Edit page) you will see your List view webpart there . Edit the Webpart Properties and Set the "Target Audience". Mention the SharePoint groups in there or users who should view the list view.
So when a user who is not a part of the target audience navigates to this page , they will not see the list View. You can show some custom message to them "You are not authorized to view this".
As I mentioned it will be just a work around if u dont want to use Javascript/jQuery and custom components/
Thanks and Regards,
Nandini

How do you change the font color in CALL-OUT text boxes in PRO XI?

How do you change the font color in CALL-OUT text boxes in PRO XI?

It's not so simple to find it if you don't know what you're looking for... But it can be found via View - Show/Hide - Toolbar Items - Properties Bar.

How to recover my notebook at factory - out of box settings with recovery DVD's.

Due to hard disk crash i formatted my hard disk, also deleted all partitions including HP Tools and HP Recovery partitions. But I have my recovery DVD of my notebook that i have created at the time of notebook purchase.
When i Inserted First Disc of my RECOVERY DVD's ..WIndows installation started and recovery manager shown the error : "The System recovery media does not support this computer. you are not able to restore this system with media."
Please assist me to how to recover my notebook at factory - out of box settings with recovery DVD's.
I have hp pavillon dm4-1222Tx Entertainment notebook, Genuine Windows 7 64-bit. Thanks

Hello Anshul-Gautam,
Please take a look at this document, and let me know if the troubleshooting steps help resolve your recovery issues.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

My phone and ITunes is now in a Productivity box, how can I get it out?

My iPhone has developed a Productivity Box and has my phone and iTune's in it, how can I get it out of that box?

I don't have a clue what you mean.

Solution manager can be used as repository DB with out-of-box integration?

Solution manager can be used as repository DB with out-of-box integration?
Hi ,
In Our Global SAP Environment, We are looking to use solution manager as a CMDB ( Config management DB) , which is kind of repository DB where it needs to keep track of infrastructure components .
A CMDB about Host consists of elements like
No. of CPUs,
RAM size,
...etc
For example in solman SMSY , you get some information about the SAP Host .
we have multiple CMDB systems , each one for our supplier .
For example Host hardware () CMDB is managed by Vendor1,
Storage CMDB by vendor 2 , and we need to join the both information , in order to get the Full elements of the Host .
A host information spread across the Multiple Vendor CMDBs.
Now we want to use solman as single CMDB, where Solman keeps track of some data , and needs to get some additional data from vendor1 by connecting into
their DB using the username/password ..etc
Does the solman has this Out-of-box functionality?
Thanks
Vasu .

Hi - smilar question
If we setup the system monitoring using solution manager , can we able see the TCodes & their screens from solman .
For example Can I able to control my ECC screens (SCC4, RZ10,SMLG,SALE,SPAD,SM59,.... ) from Solution manager ?
waiting for the reply .
Thanks
Vasu

How can I replace the out of the box photos with my own when music is playing?

How can I replace the out of the box photos with my own when music is playing?

Welcome to the Apple Community.
Select any photos you want to share with the Apple TV using the iTunes advanced menu (using iPhoto is the better option but a folder will work). Once all the photos you want are shared, go to settings > screensaver on the Apple TV and choose which of those shared photos you want to use with your screensaver.

How to add an out-of-box JMS modules?

Hi,
I am using WebLogic Server 10.3. For my project, I need to add some out-of-box JMS modules so that there is no need to ask the administrators to create and configure them. I wonder how I can achieve this. Is it good enough just to make changes on the config/config.xml and add a corresponding *-jms.xml?
Thank you,
Yang

Here's a more sophisticated version of the script Kats supplied. It is a bit more flexible, and works around issues that can arise if too many changes are attempted within the same edit session.
# Sample WLST code for creating a simple WebLogic JMS
# configuration using WLST.
# This script sets up two JMS servers on the same
# WebLogic server, each with a queue and a topic.
import sys
from java.lang import System
# A method for finding an mbean.
# It uses "cd()" rather than getMBean() as "cd()" works in more cases.
def findMBean(path):
    savePWD=pwd()
    try:
        cd(path)
        value=cmo
        cd(savePWD)
        return value
    except:
        print ' --- Please ignore the previous *No stack trace available.* message.'
        cd(savePWD)
        return None
# A method for creating a JMS server.
def findOrCreateJMSServer(serverMBean, jmsServerName):
    jmsServerMBean = findMBean('JMSServers/'+jmsServerName)
    if jmsServerMBean is not None:
        print ' --- JMS Server '+jmsServerName+' already exists.'
        return jmsServerMBean
    startEdit()
    jmsServerMBean = create(jmsServerName,'JMSServer')
    jmsServerMBean.addTarget(serverMBean)
    save()
    activate(block="true")
    print ' --- JMS Server '+jmsServerName+' created.'
    return jmsServerMBean
# A method for creating a JMS module for hosting JMS config,
# also creates a subdeployment named 'TheOne' for the JMS server.
# The module target is set to be the same target that's used
# for the passed in JMS server.
def findOrCreateJMSModule(jmsServerMBean, moduleName):
    jmsResource = findMBean('JMSSystemResources/'+moduleName)
    if jmsResource is not None:
        print ' --- Module '+moduleName+' already exists.'
        return jmsResource
    startEdit()
    jmsResource = create(moduleName,'JMSSystemResource')
    jmsResource.addTarget(jmsServerMBean.getTarget())
    subD = jmsResource.createSubDeployment('TheOne')
    subD.addTarget(jmsServerMBean)
    save()
    activate(block="true")
    print ' --- Module '+moduleName+' created.'
    return jmsResource
# A method for creating a JMS destination.   Pass 'Queue' or 'Topic'
# for destType. This method assumes subdeployment named 'TheOne'.
def findOrCreateJMSDest(destType, jmsModule, destName, destJNDIName):
    # see if dest already exists
    moduleName=jmsModule.getName()
    longname='JMSSystemResources/'+moduleName+'/JMSResource/'+moduleName
    if (destType == 'Queue'):
      longname+='/Queues/'+destName
    elif (destType == 'Topic'):
      longname+='/Topics/'+destName
    else:
      raise Exception('Unknown dest type '+destType)
    jmsDest = findMBean(longname)
    if jmsDest is not None:
      print ' --- Destination '+destName+' already exists.'
      return jmsDest
    # dest does not exist, create it
    startEdit()
    if (destType == 'Queue'):
      jmsDest = jmsModule.getJMSResource().createQueue(destName)
    else:
      jmsDest = jmsModule.getJMSResource().createTopic(destName)
    jmsDest.setJNDIName(destJNDIName)
    jmsDest.setSubDeploymentName('TheOne')
    save()
    activate(block="true")
    print ' --- Destination '+destName+' created.'
    return jmsDest
# Connect to a WebLogic Admin Server. When username, password
# and URL are not passed as arguments, connect will prompt
# for these values.
#connect('system','mypassword','t3://mymachine:7001')
connect()
edit() # Navigate to the root of the config MBean tree.
print ' --- Enter the name of the WLS server that will host the JMS servers.'
print ' --- Choices: ---'
ls('Servers')
print ' ----------------'
print ' --- --> ',
wlServerName=sys.stdin.readline().strip()
svMBean=findMBean("Servers/"+wlServerName)
if svMBean is None:
    print ' --- WebLogic server '+wlServerName+' not found.'
    stopExecution(' --- Cannot find the WebLogic myserver '+wlServerName)
try:
      jmsServerMBean = findOrCreateJMSServer(svMBean, 'MyJMSServer')
      jmsModule = findOrCreateJMSModule(jmsServerMBean, 'MyJMSModule')
      findOrCreateJMSDest('Queue', jmsModule, 'MyQueue', 'MyQueue')
      findOrCreateJMSDest('Topic', jmsModule, 'MyTopic', 'MyTopic')
    print ' --- Configuration complete.'
except:
    dumpStack()
    print ' --- Error, admin server log may contain details!!!'
    stopEdit('y')

Just went from ipad1 to 3, transferred all data. How do I scrub iPad1 back to out of box settings?

How do I take my iPad1 back to out of box settings. Just bought an iPad3. I thought synching and hit Restore would take back to ground zero.

This is most elementary. Have you considered reading even the opening pages of the instructions? They will stand you good stead! Here's the link - http://support.apple.com/manuals/#ipad

Once ipad 1 restored to out of box state how do you update ioS

Got new iPad Air and wanted to give original iPad to my mom, so restored the iPad to its out of box state. However, now when she goes to set up the iPad as hers and update the software, it says the software is up-to-date (at ioS 5). How does she update?

Because Apps get updated all the time. If you had already downloaded a prior version of the App then that's what you were using and not the updated version.
Your mom should still be able to get a version of the App for the older iOS version though.
App Store: Install the latest compatible version of an app
http://support.apple.com/kb/ht5919
You may need to download the newest version to a compatible device or a computer running itunes so it gets registered to the Apple ID she is using now and can be downloaded then form the Purchased tab in the App Store App.

I have lost my disks for my imac computer and now its on a grey screen cause i have no time machine backup. How can i restore my imac to the original out of box state please

Is there anyone that can give me the steps to erase everything and have out of box state again. i lost my disks. i ordered a os from apple
not the lion that my machine had but another one. is there anyway i can just erase everything and start over. please help

You need to contact Apple Customer Service about purchasing replacement discs for the computer. You have posted in the PPC forum, so I assume you do not have an Intel Mac, but since you haven't stated what you have we simply don't know enough to assist you.
Customer Service: Contacting Apple for support and service - this includes international calling numbers.

How easy is CAD Integration out-of box

Similar Messages

Maybe you are looking for