How exact is the N9 distance with Sports Tracker o...

Hello guys,
I use Sports Tracker and sometimes eCoach for recording and managing sport activities but it seems , that the distance is not very exact. The N9 shows sometimes 4,5  up to 5,1 km for the same track.
Another example: if I start Sports Tracker without moving the N9, it shows a distance of 800m in 20 minutes. On the same place, gpsmeefo shows that 8 satelittes are in use.
thanks mart
Solved!
Go to Solution.

I've just done a brief 11 minute test with N95, N8 and N9 on the roof terrace: - N95: 30 m - N8: 20 m - N9: 10 m When I then took the devices into a room with poorer satellite availability, the distance counter shoots rapidly higher and higher (applies to all devices). If you do your exercises in a densely built area with a lot of buildings arround or in the forest or park with lot of trees, then it's likely to be a greater deviation in the measurement. But you may ask directly Sports Tracker developer about that...

Similar Messages

  • How to program a midi foot controller on Mainstage? Does anyone knows how to program the foot controller with exclusive solo channel in order not to dance "tip tap" while from clean guitar I go to crunch or solo? How to do this programming on Mainstage?

    How to program a midi foot controller on Mainstage? Does anyone knows how to program the foot controller with exclusive solo channel in order not to dance "tip tap" while from clean guitar I go to crunch or solo? How to do this programming on Mainstage?
    I basically managed to learn how to invert parameters which allows me to be as default in the clean guitar channel and if I switch the first button on the midi foot controller I switch to crunch, but at this point I tryied so hard to programm the second and third button to switch, only through a button in one step, to a third channel for distorsion or a 4th channel for solo guitar but I couldn't figured out how this work can be done!
    I would appreciate if anyone could help or share this experience with others who are experiencing the same problem.
    Cheers.
    F.

    I cannot seem to get mainstage to recognize my FCB either. I am using IFCB. Anyone figure this out?
    Thanks,
    Eric

  • How can I view the complete score with all tracks? I seem to only be able to view one track at a time. Thanks

    How can I view the complete score with all tracks? I seem to only be able to view one track at a time. Thanks

    JoBrooke wrote:
    I seem to only be able to view one track at a time.
    unfortunately, that is how GB works, it only offers a score for a single track at a time

  • How to fix the .pdf file with error "invalid annotation object"

    how to fix the .pdf file with error "invalid annotation object"

    As long as the PDF opens, then just try saving it to a new file name. There may be a preflight script that would help troubleshoot the issue.

  • How to set the screen size with nested Iview screen

    Can someone show me how to set the screen size with nested IView  screen.
    at the moment i only try it with trial and error untill it looks somewhat close. Is there a property in VC to set the size for Height and width.
    The same question is for the form. the form elements inside the form is easy but the actual form is still a challenge.

    Hi,
    Yes you are correct ,Still the Form and iview are not able to change thier Layout Structure using a Propery.
    it is available with VC7.1
    Govindu

  • How to get the contents associated with a component.

    How to get the contents associated with a component.
    Like i have 2 buttons and i want to get the contents associated with these button without clicking them i.e without firing the event.
    By Contents i mean, whatever things we get after firing the event,we get some other window and some thing is added to the current page and so on.

    grab all the code inside the actionPerformed(ActionEvent e) method

  • How to display the message along with a value using BBP_CHECK_BADI

    Hi Gurus,
    I need to display a message dynamically when the user create's a shopping cart. I am using Check_badi for this. i.e., I need to display the buyer number and amount left for him dynamically. I am storing both of them in variables and don't know how to display the messages laong with some message " the amount left for <XXXXXX> is <$$$$$$$$>". Can you help me out.
    Thanks,
    Neelima

    Hi,
    you can use the function module 'BBP_PD_MSG_ADD'. This is the function module normally used for the displaying the error messages in SRM.
    See wether you can use already available error messages , use the transaction SE91 , and the message class being BBP_PD

  • How to map the bulk users with the required  roles in portal at one time

    Hi,
    Would anyone tell me how to map the bulk users with the required roles in portal at one time?

    Thanks for all the reply.
    <b>I need to assign 1 or 2 group to n((eg) 1000)number of users</b>
    I tried the first option like
    [group]
    gid=
    gdesc=
    user=
    Thr problem with this is I could n't put more no of users in the notepad.
    I would be able to put only 150 users in the single line of notepad. If it goes to next line it is not working.
    I tried creating seperate notepad but in Import it says "exists"
    I'm not sure about LDAP. Would anyone explain me the best approach to do this.

  • How to read the 'Input help with fixed values' of domain .

    How to read the 'Input help with fixed values' of domain .
    The domain has a Value range i want to read those values .
    Are these values stored in any table ?
    Plz help me i need it ver badly...
    Thanks in Advance...

    Hi Chandra Shekhar,
    To read the 'Input help with fixed values' of domain , you can use the function module : HR_P_GET_FIXED_VALUE_TEXT.
    iIf you enter the domain name, you will find the fixed values entered in the domain.
    These values are stored in a table DD07L(DD zero 7 L). Here the values are stored based on domain name.
    See if it works for you.
    Award points if its helpful.
    Regards,
    Bhanu

  • How to update the posted documents with Business Area wise

    Dear experts
    Please suggest me how to update the posted documents with Business Area wise
    Ajeesh.s
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    Edited by: Thomas Zloch on Nov 2, 2011 2:26 PM

    Hi,
    Select all your folders in Disco Administrator,ALT+ENTER to go to properties, then change the database from the default database to the remote database.
    Hope that helps,
    Rod West

  • How to display the selection screen with icons as well as with text element

    How to display the selection screen with icons as well as with texts (written in text elements) for PlantDate, OrderType,WareHouse..

    Report zex33.
    type-pools: icon.
    selection-screen begin of line.
    selection-screen comment 1(20) text_001.
    parameters: p_werks type marc-werks.
    selection-screen end of line.
    selection-screen begin of line.
    selection-screen comment 1(20) text_002.
    parameters: p_whouse(10).
    selection-screen end of line.
    selection-screen begin of line.
    selection-screen comment 1(20) text_003.
    parameters: p_auart like vbak-auart.
    selection-screen end of line.
    initialization.
      write ICON_PLANT  as icon to text_001.
    concatenate text_001 text-001 into text_001 separated by space.
      write ICON_WAREHOUSE  as icon to text_002.
    concatenate text_002 text-002 into text_002 separated by space.
      write ICON_ORDER  as icon to text_003.
    concatenate text_003 text-003 into text_003 separated by space.

  • How i map the caf data with data of UWL in web dynpro

    Hi Experts,
    i created a bpm project with nwce 7.1.1 and it have a independent caf to keep it's data and status.
    now i have to create a view(use web dynpro) such like UWL,
    my question is
    how i map the caf data with UWL, and let the view can open the task(popup a window, just like UWL do) for user to finish their job?
    thanks.

    Hi Vic
    Your requirement is exect functionality of UWL based on WEBDYNPRO, CAF and BPM for automation? ,and question is How to use CAF with WD or CAF with UWL API's ?. please clarify it.
    Please fo through from given doc misght give u some idea
    1. [How to develop Web Dynpro UI for your CAF project |http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417300)ID0722080650DB02400261803144436507End?blog=/pub/wlg/5414]
    Best Regards
    Satish Kumar

  • How to configure the wifi access with specific time slot for kids?

    how to configure the wifi access with specific time slot for kids?

    Which model of AirPort base station do you have? Which version of OS X is your MacBook Pro running?
    Wi-Fi access can be limited using the Timed Access feature of the AirPort routers. You would do so using the AirPort Utility.

  • How to notify the waiting queue with first-in-first-out?

    Could anyone know
    how to notify the waiting queue with first-in-first-out?
    I dont want to notify the waiting queue randomly!
    thanks~

    i assume you are referring to wait "queue" of threads waiting to be notified. while you can do this with some effort on your own part (it's not trivial), depending on what type of guarantees you want, you could use a ReentrantLock with the "fair" policy. it tries to be FIFO but doesn't guarantee it. if you need stronger guarantees, then you will have to code it yourself.
    note, that many of the reasons for using wait/notify explicitly are now handled with some of the concurrent utilities like BlockingQueue, so you may not need to code your own wait/notify logic.

  • How to use the class CL_CTMENU with the method DISABLE_FUNCTIONS

    Hi Friends,
    How to de-activate some functions in the Menu bar?
    Eg: - Sales document
                 Create
                 Change
                 Display
    I want to de-activate "Change"
    In other words: - How to use the class CL_CTMENU with the method DISABLE_FUNCTIONS in my program.
    Regards,
    Hari
    Edited by: Bhatlapenumarthy Hari Krishna on Jun 9, 2008 5:22 PM

    Krishna,
    It is not possible to deactivate the CHANGE option in themenu bar using the method disable_functions of cass CL_CTMENU. This method allows you to deactivate only the function codes of the CONTEXT MENU, which is available only when u press the left mouse button.
    U can use the SET PF-STATUS 'XXX' EXCLUDING fcodes option to disable the CHANGE.
    *****Reward points if useful
    Regards,
    Kiran Bobbala

Maybe you are looking for

  • Field Selection Based on Material Type

    Hello!! Can any one tell me how to make a single field mandatory in material master based on material type? I know we can use OMS9 to make it mandatory... the field i was looking is in a field selection group....when i make it mandatory i am actually

  • U310 - Does it have an SSD? Should it appear in BIOS?

    Hi! Can anyone verify whether the Lenovo u310 has an mSATA SSD? This is to help settle an argument between myself and the retailer I purchased it from who are claiming that they misadvertised the laptop when they said it contained an SSD.  The cause

  • Item Class question

    I've created a custom folder with the following code to get a LOV for days of week.While creating the item class I didnt ask it to sort the values but still it gives me the value in alphabetical order. When i tried to run the same query in sql it was

  • Microsoft Word 2007 Text Form Fields: Cannot limit characters

    Hi there, Thank you very much for taking the time to check this post out. I know that someone had already put a similar question up (a few years ago) and it got resolved, but there was no information as to how the fix was applied or what went wrong w

  • Downloading Windows Media for Mac

    I have recently bought a new apple and I am trying to download the Windows Media Player from the download site. When the set up program downloads and I try to open it to set up the player a window pops up saying unable to find application to open pro