How i can give page reminder to firefox?

how i can give reminder to firefox for a page.

I mean by page reminder, that if i have to work at 9:00pm on my specific page, then at 9.am how can i give firefox a reminder of that particular page? in case if forget about that page to work, then firefox automatically open the page at 9.pm.

Similar Messages

How We Can Change Page Size During Report Run Time

Hello !
How We Can Change Page Size During Report Run Time .
How can we stop to change the column name when we amend a sql in report data model.
Thanks !
null

hello sohail
1. question - i'm afraid this cannot be done ... bit in report 6 and newer you have posibility to divide your report in 3 parts (former header, body, trailor) and each part can have diferent page siz, orientation , ...
2. question - best is give each column in your statements in one report diferent alias. when you have to chnge something, alias will remain same ...
try this: select 1 as fist_column, 1 as second_column from dual
hope this helsp

Hi guru's i want to dovelope or modify bapi how we can give name for bapi

hi guru's i want to dovelope or modify bapi how we can give name for bapi plz help me...

Hi,
If u want to assign the form to Standard sales order, The, this form in the NACE.
and the, Run from va02/03.
Reward Points,
Vamsi.

How we can give the confirmation of the sales order to the customer.?

how we can give the confirmation of the sales order to the customer.?
after the we generate thge sales order how we will give the confirmation to the customer automatically or in any way in SAP SD

A confirmation can be given to the Sold to party for the sales order by means of an output type, which is the most used functionality.
You can create an output which can be a word or PDF document, or an email , fax etc. Based on the kind of confirmation you want to give (Document, email, fax) do corresponding settings in the output for printers, email settings, fax settings etc. and enable this output to be triggered during sales order creation by assigning the output to output procedure for sales documents. This part of configuring an output is done by Functional team while the email, fax settings are done by basis team in combination with tech team.
The output should have a smartform and corresponding report program to populate the smartform. This part should be taken care of by the technical team.
Once all these things are done, if a sales order is created, the output will be triggered which will send a confirmation document, email , fax as per the configuration to the sold to party. If you want the confirmation to be send to more partner functions, that is also configurable in the output configuration.
Pls reward points if it helps.

How i can help to translate Mozilla FireFox (Web browser) in Uzbek language?

How i can help to translate Mozilla FireFox (Web browser) in Uzbek language?

Also [https://wiki.mozilla.org/L10n:Teams:uz]

How i can give to the answers,

Hi team,<o:p></o:p>
How I can give to answers for posted of sql server questions.<o:p></o:p>
Can please give the procedure step by step for answering the posted questions.<o:p></o:p>

That is ok,<o:p></o:p>
I am asking the people posting the questions, those questions where it is showing and how to give the answer.<o:p></o:p>
I don't have very good English to understand the question. Let me try...
if you go to http://social.msdn.microsoft.com/Forums/sqlserver/ you would see all questions posted. You can filter them by your choice using sub-forum you want.
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

How i can give date in each input for applying the exchange rate in Query.

Hi Gurus,
We have a requirement to create some currency conversion queries. In the selection screen user should be able to give four inputs. Like given below
Input 1.          a) key figures
                        b) Fiscal Year
                        c) Fiscal Period
                        d) Exchange Rate Type
                        e) Date (Exchange rate will be applied which is applicable on the given date)
Input 2.         a) key figures
                        b) Fiscal Year
                        c) Fiscal Period
                        d) Exchange Rate Type
                        e) Date (Exchange rate will be applied which is applicable on the given date)
Input 3.          a) key figures
                        b) Fiscal Year
                        c) Fiscal Period
                        d) Exchange Rate Type
                        e) Date (Exchange rate will be applied which is applicable on the given date)
Input 4.          a) key figures
                        b) Fiscal Year
                        c) Fiscal Period
                        d) Exchange Rate Type
                        e) Date (Exchange rate will be applied which is applicable on the given date)
So we will have 4 key figures in the query results with the exchange rate applied on the given date.
I will make four restricted key figures and make the query. I do not know how i can give date in each input for applying the exchange rate.
Please give your suggestions to resolve my problem.
Many thaks in advance.

You can not bring the key figures in the selection screen for the currency translation. Instead you can apply a currency translation type to respective key figures in the query definition.
The currency translation type can be defined in RSCUR transaction, where you can maintain the parameters like Exchange Rate Type, Exchange Rate Date etc.
You can refer one of my article on this at
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/600157ec-44e5-2b10-abb0-dc9d06ba6c2f
Hope this helps.
Regards,
Yogesh

Conditional Layout (How I can determine page filling level? )

The document consist with two parts:
Part1: lines
Part2: 1 line+signature+stamp = should be inseparably
Situation1:
When part1 have n lines which up to 80% page then document allocated on single page. No problem.
Situation2.
When part1 have n+k lines which filled page over 80% then part2 must be on next page.
How I can determine end-of-page marker?
or
How I can determine page filling level ?

Part2 should be allocated on single page with part1 ( if possible).

How i can fix crashing of my firefox?

this morning i was opened my laptop

We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and paste them into your response here.
[[Image:SubmittedCrashReports-Win7|width=520]]
<br><br>
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...'''
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Recentley printing most documents in firefox print on 1/4 of the page and not the complte document. When I print the same thing in safari it prints fine. Please advise how I can get proper printing in firefox

When using Firefox to print most documents ( boarding passes, mastercard statements,genealogy documents) the printing only shows on 1/4 of the page, is in the lower left quarter and does not print part of the right side of the information. When I go into Safari and print the same documents within 2 minutes they always print fine. We like Firefox and would prefer to continue to use but if we can't print we will have to use Safari more often

I have the same problem with cutting of the page since installing the new version. If you manually zoom out the print it only shows 1/4 of the page on a whole page of paper. Something is wrong here.
I have done all these steps and it still does NOT print correctly!
I am a IT professional and something is not right with the new firefox browser. Please supply with fix or we will have to permanently switch back to Internet Explorer, which works perfectly.

How do I delete pages from Scrapbook Firefox 3.6.3 on Windows7?

I cam't delete webpages captured on the Scrapbook. I'm using Firefox 3.6.3 on Windows7.
== This happened ==
Not sure how often
== I tried to delete one page on the Scrapbook

ya lo tengo :
ALT+K y luego borrar lo que te venga en gana
who is the best
DRSLUMP WAS HERE!!!

How I can add polishkeyboard in to Firefox OS?

My ZTE open c does not support the Polish language. This is not a problem for me.
I have a problem with writing in Polish. Is there any way to change the keyboard layout in Firefox OS 1.3?

You can add Polski(Polish) keyboard from settings app, See:
* https://support.mozilla.org/kb/keyboard-settings-and-tips-firefox-os

Mouse scrolling on Firefox?, i have the question of how i can get mouse scrolling on Firefox?

i try to put mouse scrolling functions on firefox, but i can't
this is my code:
<pre><nowiki><!DOCTYPE html>
<html>
<head>
<title>Canvas</title>
<meta charset="UTF-8">
<meta name="author" content="http://programmingheroes.blogspot.com.es">
<style>@font-face {
font-family: "PlaneCrash";
src: url('Calligraffiti.eot?') format('eot'),
url('Calligraffiti.woff') format('woff'),
url('Calligraffiti.ttf') format('truetype'),
url('Calligraffiti.svg#Calligraffiti') format('svg');
body {
background-color: #000;
overflow: hidden;
margin: 0;
div {
-moz-user-select: none;
-moz-user-select: none;
canvas {
background-color: #000;
position: absolute;
#title {
-moz-transform: rotateZ(-5deg);
-moz-transition: -moz-transform 2s;
-moz-box-reflect: below -40px
-moz-gradient(linear, left top, left bottom,
from(transparent), to(rgba(255, 255, 255, 0.6)));
-moz-transform-origin: 0% 100%;
font-family: "PlaneCrash";
position: relative;
text-align: center;
top: 30px;
font-size: 6em;
color: red;
text-shadow: 0px 0px 20px white;
#title:hover {
-moz-transform: rotateZ(5deg);
</style>
<script>
window.addEventListener("resize", resizeCanvas, false);
window.addEventListener("DOMContentLoaded", onLoad, false);
window.requestAnimationFrame =
window.requestAnimationFrame ||
window.mozRequestAnimationFrame ||
window.mozRequestAnimationFrame ||
window.oRequestAnimationFrame ||
window.msRequestAnimationFrame ||
function (callback) {
window.setTimeout(callback, 1000/60);
var canvas, ctx, w, h, particles = [], probability = 0.09,
xPoint, yPoint;
var img = new Image();
img.src = "img/fire.png";
function onLoad() {
canvas = document.getElementById("canvas");
canvas.addEventListener("mousedown", mouseDown, false);
canvas.addEventListener("DOMMouseScroll", DOMMouseScroll, false);
ctx = canvas.getContext("2d");
resizeCanvas();
window.requestAnimationFrame(updateWorld);
} // fin de onLoad();
function mouseDown() {
createFirework();
} // fin de moveDown(e);
function DOMMouseScroll(e) {
e = e || window.event;
if (e.DOMMouseScroll > 0) {
probability += 0.01;
else
(e.DOMMouseScroll < 0)
probability -= 0.01;
probability = probability<0? 0: probability;
} // fin dw mouseWheel();
function resizeCanvas() {
if (!!canvas) {
w = canvas.width = window.innerWidth;
h = canvas.height = window.innerHeight;
} // fin de resizeCanvas();
function updateWorld() {
update();
paint();
window.requestAnimationFrame(updateWorld);
} // fin de update();
function update() {
if (particles.length < 500 && Math.random() < probability) {
createFirework();
var alive = [];
for (var i=0; i<particles.length; i++) {
if (particles[i].move()) {
alive.push(particles[i]);
particles = alive;
} // fin de update();
function paint() {
ctx.globalCompositeOperation = 'source-over';
ctx.fillStyle = "rgba(0,0,0,0.2)";
ctx.fillRect(0, 0, w, h);
ctx.globalCompositeOperation = 'lighter';
for (var i=0; i<particles.length; i++) {
particles[i].draw(ctx);
} // fin de paint();
function createFirework() {
xPoint = Math.random()*(w-200)+100;
yPoint = Math.random()*(h-200)+100;
var nFire = Math.random()*50+100;
var c = "rgb("+(~~(Math.random()*200+55))+","
+(~~(Math.random()*200+55))+","+(~~(Math.random()*200+55))+")";
for (var i=0; i<nFire; i++) {
var particle = new Particle();
particle.color = c;
var vy = Math.sqrt(25-particle.vx*particle.vx);
if (Math.abs(particle.vy) > vy) {
particle.vy = particle.vy>0 ? vy: -vy;
particles.push(particle);
} // fin de createParticles();
function Particle() {
this.w = this.h = Math.random()*6+1;
// Position
this.x = xPoint-this.w/2;
this.y = yPoint-this.h/2;
// Velocidades x e y entre -5 y +5
this.vx = (Math.random()-0.5)*10;
this.vy = (Math.random()-0.5)*10;
// Tiempo de vida
this.alpha = Math.random()*.5+.5;
// color
this.color;
} // fin de Particle();
Particle.prototype = {
gravity: 0.05,
move: function () {
this.x += this.vx;
this.vy += this.gravity;
this.y += this.vy;
this.alpha -= 0.01;
if (this.x <= -this.w || this.x >= screen.width ||
this.y >= screen.height ||
this.alpha <= 0) {
return false;
return true;
draw: function (c) {
c.save();
c.beginPath();
c.translate(this.x+this.w/2, this.y+this.h/2);
c.arc(0, 0, this.w, 0, Math.PI*2);
c.fillStyle = this.color;
c.globalAlpha = this.alpha;
c.closePath();
c.fill();
c.restore();
} // fin de Particle.prototype;
</script>
</head>
<body>
<noscript>
No tiene habilitado JavaScript. Debería habilitarlo para poder
disfrutar al completo de los contenidos de esta página.
</noscript>
<div>
<canvas id="canvas">
Tu navegador no soporta el elemento <code>canvas</code> de HTML5.
</canvas>
</div>
<div id="title">
fireworks!
</div>
</body>
</html></nowiki></pre>

Note that some CSS properties now longer need or can be prefixed with a -moz- prefix.
*https://developer.mozilla.org/en-US/docs/Web/CSS/transform
A good place to ask advice about web development is at the mozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the mozillaZine forum site in order to post at that forum.

How i can istal google toolbar to firefox 3.6.21 ?

Icant use google toolbar in firefox ?

Install it from this page. <br />
http://www.google.com/toolbar/ff/index.html
Be aware that Google has decided not to update the Google Toolbar for Firefox 5.0 and later versions, so Firefox 4.0 is the last version it will work with.

HT202879 How I can get pages, numbers, keynote for free?

I purchase my mbp 13 (mid 2012) on june 4, 2013. I update to mavericks, but it never let me download pages, number and keynote. Any suggestions?

buy a new device. Old devices must purchase at retail prices.
Jason

How i can give page reminder to firefox?

Similar Messages

Maybe you are looking for