How i can setup the airport express with pwoerline adapter from linksys

hi
i was using the linksys router but as my flat was big . i use powerline adapter from linksys also PLWK400 and it was working perfectly .
but when i change my router to apple ( airport express ) the power line adapter not work any more.
i have contacted the linksys Tech support and they inform me that pwoerline adaoter should work with any router.but unfortunately not work with apple router.
can some body help please...

i would like to calrify that i am using airport extreme not express.
thanks

Similar Messages

How to set up the airport express with a linksys wireless-g broadband router

I need to know if and how to set up an airport express to use to extend a home wi-fi network. I have AT&T service with a 2WIRE modem. I am using a Linksys wireless-G broadband router. I also have the new Macbook Air notebook. The airport express keeps giving me a blinking amber light even when the ethernet cable (from the modem) connected. Please let me know how to set up an extended wifi network using this system. Any help would be appreciated.

If that is all that is done, the Express would not provide more wireless coverage. Instead, it would duplicate the coverage provided by the Linksys and there would be two WiFi systems covering approximately the same area. As per my above comment, one Express connects via Ethernet to the Linksys. The second Express provides the extension.
You must have misunderstood what I was saying.
Linksys is providing a wireless network.
The Express is connected to one of the LAN ports on the Linksys router using a long Ethernet cable (or Ethernet powerline adapters)
The Express is located on the other side of the house, for example.
The Express is configured to create a wireless network using the same wireless network name, security and password as the Linksys router
The Express is configured in Bridge Mode
This has worked quite well for me for years. Computers "switch" from one wireless access point to another smoothly and automatically while they move around the house.
Although this is an "extended" network, it is technically known as a "roaming" network.
This is what I was suggesting as a possible alternative without having to buy more hardware.

Can I use the airport express with a desktop computer that is not wire less- I want to have wifi in the house for an iphone

Can i use the airport express with a desktop computer not wifi- I want wifi for my iphone

I can't seem to find any information anywhere. It seems like it should work since the AX is showing up on his wifi settings on both his iPhone and iPod. Not to mention the Apple "Genius" told him that it should work. However, they also told him that it came with an ethernet, USB and the stereo patch cables...

How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

Can I use Airport Express with iPhone in my hotel room?

Is there a way to set up an Airport Express in my hotel room when I travel, so that the provided High Speed internet cable in the room can be plugged into my Airport Express, giving me a wireless internet connection for the iPhone? I use Airport Express often this way with my MacBook, so I don't have to be tethered to the cable.

I did this about a month ago when I was in England. I just had the Airport Express with me, and had not done any configurations. I plugged it in and had the iPhone find it. It worked in some hotels, and didn't at others. When it worked it was great. I assume with some of the hotels where it didn't work, that I needed to configure it but since I didn't have my laptop I didn't have any way to configure it. Is there any kind of "universal" or "automatic" configuration you can set it up with?

Can't configure airport express with laptop after 10.5.6 update

I can't configure airport express with laptop after 10.5.6 update
the airport express is seen but can't access configuration screen, I get the spinning wheel forever.
Other computer gets to the configuration screen without problem.
And the airport utility describes the airport express like this: syAP.802.11format

I downloaded the airport utility and re-installed
and the problem was solved

How I can stop the combo box with list of values from fireing validations

Hi I'm using Jdeveloper 11.1.2.3.0
Using Hr Schema employees table
I Display employees data in af:table
and I make List Of values on Department_id filed to easy change the employee department
and another one on Job_id filed
and Imake them UI Hints as ( combo box with list of values ) in the employeesVO
the problem is when I Select a value from department or jobs ( combo box with list of values )
fires the entire filed validations for mandatory atributes
Note : the af:table Property ( contedelivery) is set to (immediate )
How I can stop the combo box with list of values from fireing validations

check it out.,
http://andrejusb.blogspot.in/2012/09/what-to-do-when-adf-editable-table.html

How can i setup my airport express with my retina display macbook, how can i setup my airport express with my retina display macbook

Hi i have a macbook pro with retina display and these mac doesnt have a lan port, so i cant connect the aiport express to my mac with a cable.
Thanks for the help

You would need the AirPort Utility app for your iPad in order to administer the AirPort Express. Note: The version of this AirPort Utility will not support older 802.11g AirPort base stations. The AirPort Utility is available from the Apple App Store.

How do I use an airport express with the Apple A1121 speaker?

I have the old Apple A1121 speaker, and have only just stumbled upon the fact I could play music from my MacBookPro or other apple device through the AirPort Express wirelessly. But I don't understand how to do it? Any help would be much appreciated.

No, actually a really good question. The adapter is basically a 3.5 mm audio plug on one end and a digital optical jack on the other. It is designed to be used with a digital optical cable. Some cable providers have these in one unit. That is, the adapter is permanently attached to one end of the cable.
The following link is just one example of these types of cables/adapters.

How do I connect the airport express base station to the DSL modem? Can it be done wirelessly?

Can the airport express base station be wirelessly connected to the DCL modem?

Alan1111 wrote:
Can the airport express base station be wirelessly connected to the DCL modem?
Alan,
Please provide more information. (Make/model of the modem and airport express, Mac OS version, etc.)
Most likely your modem is the source of your internet connect and you sound like you are trying to extend your network through the airport express (which is a router).
I don't know what a "DCL modem" is. Perhaps you meant "DSL".
Most internet modems are either a "Cable Modem" or a "DSL Modem".
Time Warner (TMC) and Comcast typically provide cable modems, which use a coaxial (round) cable.
"DSL Modems" are used with AT&T and they are connected to your telephone wires.
Both of these types of modems usually includes a router built-in, some include a wireless router, too.
Either way, I don't know of any way to connect an Airport base station to a router wirelessly.
That would be called a "bridge" in networking terms and while it may be possible, it is not common.
Most routers use a direct ethernet cable connection, because the data flows much faster than wirelessly.
Normally, one connects to their airport base station with an ethernet cable from the primary home/office computer.
It can be accessed wirelessly, but only if you enable that option in the Airport utility (not the default).
Again, connecting or bridging one router to another router is not a common method.

How do I include my Airport Express with my base Airport Extreme to extend my in house wireless network??

How do I set up wireless network extension/expansion adding Airport Express to existing Airport Extreme Network??

OK, thanks for the clear information, this really helps.
Locate the AirPort Express about half way between the AirPort Extreme and the general area that needs more wireless signal coverage. The more that you have line-of-sight between the AirPort Extreme and AirPort Express, the better the performance will be.
Power off the AirPort Express for a few minutes
Hold in the reset button firmly...and keep holding for an additional 10 seconds while you simultaneously plug the power cord back into the back of the AirPort Express
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light
This process is tricky.....you almost have to have 3 hands to do this.
If you have an iPad or iPhone, the setup is almost too easy to be true. In that case.....
Tap on Settings (gear icon) on the home screen
Tap on WiFi
Under the heading of Setup a New AirPort Base Station....
Tap on AirPort Express
The utility will analyze things for a minute, then suggest that the Express be configured to extend the AirPort Extreme network
Type in a device name that you want to use, then tap Next
The utility will set up everything for you automatically. When you see the message of Setup Complete, tap Done and you are good to go.
If you want to use the Mac running (10.6.8) for the setup.......
Make sure that the wireless is turned on at the Mac
Open Macintosh HD > Applications > Utilities > AirPort Utility
Select the AirPort Express and click Manual Setup
Click the Base Station tab under the row of icons
Enter a device name for the AirPort Express
Enter a device password for the AirPort Express
Verify the device password
Adjust the Time Zone setting
No other adjustments are needed here
Click the Wireless tab below the icons
Set the Wireless Mode to Extend a Wireless Network
Click on the Wireless Network Name box and your AirPort Extreme network name should appear as a choice. Click to select that....or manually enter the exact name of the AirPort Extreme wireless network
Make sure that Wireless Security is set to use WPA2 Personal
Enter the wireless network password for the AirPort Extreme
Verify the wireless network password for the AirPort Extreme
Click Update at the lower right of the window and wait a full minute for the Express to restart. A green light on the Express at this point will be a very good sign that things are up and running correctly.
Your Mac will automatically select the AirPort with the best signal quality. If you have an iPhone or iPad, you may need to manually turn off the WiFi when you move the device near another AirPort, and then turn WiFi back on to get the iOS device to connect to the best signal.
Good luck, please post on your results with the method that you choose.

How do you setup an Airport Express to only stream music???

+I have a Time Capsule setup as my base for the internet access, followed by an airport express for wireless usb devices and for my stereo. I have a second airport express to which I want to setup for streaming music only. When I leave my home and go to friends etc i which to stream music via this second airport express.+
When I setup this device I get "problem connecting to the internet" I have marked that I do not which to connect to the Internet and the following message comes "make sure your ethernet cable is connected" blah blah blah. All I need is a portable music streaming "Airport Express" device, no connecting to another network, no internet access ect. Please can someone help?????? Am I just chancing my tail???
Thanks in advance.

So you want to set the AirPort Express (AX) up at a location with no wireless network and no Ethernet network?
Just configure the AX to create a wireless network and ignore the messages about not being connected to the internet... because you aren't. Have your computer join the wireless network created by the AX. Start iTunes and stream music.

Cant load the airport express with 802.11n

today i just got my new airport express with draft n. but my router can't load the config anymore after i uploading my setting ( change to N with 5 GB ). i've tried all of methods that the manual included. I think i need to exchange the new one. i just bought it yesterday.
i wanna know that would apple store give me refurbished product to me ????

today i got a replacement of AE with 802.11n. the same problem come up. Cant load the configuration. how on earth can i change the setting of my AE? this is my second times, my serial number is 6F8111XXXXX. Please apple fix it.
***

Can't connect Airport Express with Extreme

So after 3 hours of working on this POS,I have gone to the boards in hopes that maybe someone can help me.
Situation:
Cable Modem---Airport Extreme---Airport Express---Stereo System
Computer: Windows XP
I can connect the airport extreme to the modem and get an internet connection. Airport Utility recognizes Airport extreme. No problem there.
Plug in airport express without it being tethered to a CAT 5 cable. Airport utility does not pick it up at all. The only way I can get the utility to recognize it is to tethered it to either the CAT 5 cable coming out of the modem or a cat5 cable coming out of the airport extreme. Both cases are not doable.
I want the airport extreme and the airport express to connect wirelessly. Try to setup WDS but the only way I could do that is to setup the extreme first, then disconnect the CAT 5 cable running to extreme and then reconnecting that cable to the express so that the Utility would pick it up. Set Up WDS but as soon as I reconnected the cable back to the Airport Extreme it stop working.
To add more problems, my computer will not connect wirelessly to the extreme without going to the blue screen(the one that says comp is unstable).
someone please help me.

Did you get a solution? I have a similar problem in that my i-Mac can successfully see and use the Extreme (with a Linksys modem as I am in UK where we need a modem in most instances) but the Express to which I wish to link nd play music is 'invisible'. Neither scanning through the task bar icon or using the Airport utility 'sees' the Express even though I can as I have now put it in the same room! It did see it briefly once but not since so have factory reset it and still it hides.
Any ideas?
Mervyn

Can I use the Airport Express to connect to a Linksys Wireless Network and then use the Ethernet port on the Airport for a wired connection to a device for internet access? Would I be able to then also use that Ethernet pt to a Ntwk Hub for more wired c

Thanks for the help. Looked but not clear on what I am trying to do as being possible. Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it?
I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located. Would prefer to replace Linksys with all Apple, but just not possible financially yet. Thanks for the help.

If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.

How i can setup the airport express with pwoerline adapter from linksys

Similar Messages

Maybe you are looking for