How I do schedule Airport reboot in windows?

I manage a network with 2 Airport routers which both seem to crash every 2-3 days. No combination of settings prevents the crashes completely.
I would like to schedule reboots to see if that prevents the crashes from ocurring.
I know I could use applescript to do this in OSX but the boxes I have are running Windows and Ubuntu. How can I schedule the reboots in windows using Airport Utility?
Thanks,
J

darkhorsenmd wrote:
please guide me as to how to do 3 equal partitions of the hard disk in windows 8.1
i have 1tbb hdd & i want 3 partitions of 300gb each
please help!!!
I think your better off making separate folders. What are you trying to accomplish making 3 partitions for?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Similar Messages

How to setup the airport extreme for window xp

How to setup the airport extreme for window xp

Sorry, I forgot to mention a few points:
1) I don't have the Airport Extreme base station;
2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

How to connect the Airport Extreme to Windows 2003 network?

Hi there,
I recently bought an Airport Extreme. I plugged the wired cable to the Airport that previously was in my MacBookPro and gave me access to our Windows network.
What do you need to do in order to access the Windows 2003 network from the Airport Extreme?
Thank you very much in advance your help!
Wildeagle

Thanks Tesserax!
for your support..
I changed it the way you told me..
it is very simple... and sounds very logic..
But after I did changed it in the correct IP address of the server
and I changed the IP address of the Internet Router (this was a must concerning the AP utility)
1> the internet was slown down..
2> the server was not reconisable by the iMac.. he gives the server a PC status ?!?!
3> the connection was poor and was not found in the AP network
very strange so I changed it to the old version
is there really no option?
perhaps with the DHCP? or with the Internet router?
FYI
I have:
1: Internet/ connected with a HUAWEI router, recieved from my internet provider
2: connect the Huawei router with the AP Extreme Router
3: connect the AP Extreme router with the Server NAS
4: AP Extreme router is the basis.. and from there I do have an Apple Airport Network

How do I connect my airport extreme to windows 8.1

how do I connect my airport extreme to windows 8.1

Connect an Ethernet cable between the U-verse router's LAN port to the WAN (circle-of-dots) port on the AirPort Extreme Base Station (AEBS). Since you will have two routers in series, you will want to reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode))

How do I connect airport extreme to seagate hard drive using windows

How do I connect airport extreme to seagate hard drive using windows?

First the AirPort Extreme Base Station (AEBS) cannot share out an external HDD attached to its USB port unless it is formatted in either HFS+ or FAT16/32. It will not work if the HDD is formatted in either NTFS or ExFAT.
If the HDD is formatted properly, when you access the AEBS with the AirPort Utility, does the HDD show up properly on the Disks tab of the utility?
If it does, then you would access the HDD as any other network share, using the following format: //servername/sharename. In the case of the AirPort Disk (a HDD attached to the USB port of either an Extreme or Time Capsule), the "servername" would be the Extreme's Base Station Name, and the "sharename" would be the volumename of the HDD.

How can I open ports on my AirPort Extreme, from WINDOWS?

I have an Airport Extreme as my router, and I have a Windows-based computer. I need to open ports on the router (ironically, it is for my Apple TV).
However, even though I can use the Airport Utility for Windows (latest version 5.5.3), I cannot open ports from the application.
Everywhere I look, I am supposed to have a firewall tab in the Advanced section, but I do not have it. The only tabs that I have in Advanced are:
Logging and Statistics
MobileMe
IPv6
How can I open ports on my Airport Extreme router from Windows?

Is your AirPort Extreme the only router in your network configuration?

How do i install the airport on my windows pc

how do ik install the airport on my windows pc (windows 7)?

To set up and configure airport base stations, download airport utility for windows
http://support.apple.com/kb/DL1391

How do i install airport extreme on a windows pc and route it to another windows desktop?

How do I install airport extreme into a windows desktop pc and then successfully route it to another windows desktop?

The AirPort Extreme Base Station (AEBS) is an Internet router that supports both wired and wireless network clients. You can connect both of your desktop, using either media, to the AEBS for network connectivity.

TS4194 When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing. How do i fix this? Thank you in advance.

When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing. How do i fix this? Thank you in advance.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

No matter what OS im currently on, if I restart my computer and do not touch the Alt key, it will reboot in windows every time. How do I make it so it will reboot in Mac automatically?

So last night, I downloaded all my software updates and hit 'restart'. then I went to bed, thinking my updates would install themselves automatically. I woke up this morning only to find that my computer had restarted in Windows 7. How can i make it so that without holding down alt, my computer will restart in Mac, even if my starting point is in Windows?
--Also side note, why does my clock on my Mac OS keep getting messed up whenever I restart??
-Thanks a bunch!

PurpleLego wrote:
Doing this does give me an oportunity to chose which OS i will restart in. But I guess what I'm asking is, how can I make it so that Mac is my default OS that i will reboot in.
i.g. Im on Mac OS and i tap my power button, and select restart. When it's rebooting, and without holding down alt, I want my computer to reboot in Mac. As of now, if I do that, it will reboot in Windows.
Whichever you choose becomes the default!

How to add a second Airport Express under WIndows XP ?

Hi!
I have bought a second Airport Express but I don't know how to make the set-up under WIndows XP so that I can use this second AE ?
Can somebody help me ???
Tony
AMD 64 X2 4400+ Windows XP

have just used the Airport Setup assistant and managed it...;-)
All other modification with Airport Administration Tool..
...some work but it works now with WEP etc...;-)

How can I download airport extreme software on new windows 8 computer?

How can I download airport express software on new Win8 computer? keep getting error message saying that I need Win7 or newer.

AirPort Express needs AirPort Utility 5.6.1 for Windows.
AirPort Utility 5.6.1 for Windows - Support - Apple
If that won't run on Windows 8, then you best call Apple Support.....or borrow an iPhone or iPad for a few minutes to set up the Express.

How to find airport extreme in windows 8.1

My windows 8.1 64bit wont find my airport extreme model A1408

Are you using wireless or ethernet?
Ethernet is always to be preferred.. please plug the computer in by ethernet if possible even if you are using wireless.
Does the computer get a valid IP address from the AE?
Open the command window (which strangely has never been replaced to this point).. and type
ipconfig /all (find the IPv4 address for wireless and ethernet).
If they get 169.254.x.x address then it is self allocated and there is simply no connection.
If you get proper IP address then ping it, using the command
ping AEname or ping AEIPaddress (where you use the network name or network IPaddress of the AE).
Certainly if your AE is named
Fred Blog's Airport Extreme
That is not a valid windows name.. so you should fix the names on your AE.. use names that are short, no spaces and pure alphanumeric.
Please install the airport utility for windows.. there is none specifically for win8 but the win7 version should load.
That improves things with bonjour and some extra files.
Windows can firewall off the AE as unknown device. Ensure the computer is in home location, not work or public. Ensure that if you have correct IP address and ping fails then simply turn off your firewalls.
If wireless still doesn't work.. welcome to the world of voodoo.. you can have driver issues.
Post back exactly what the wireless card is in the computer.

Windows 8.0 Volume License machines reboot and windows 8.1 is installed??

We are a small private university with 484 computers running Windows 8.0 with MAK key.
This week we have had 2 Windows 8.0 computers spontaneously upgrade to Windows 8.1.
Since we do have a windows 8.1 MAK key all we had to do was enter the correct key and the computers were fine but everything I am reading about Volume Licensing says that this is not an upgrade path for Windows 8.1.
Is Microsoft pushing out Windows 8.1 slowly to volume licensed computers on Windows 8.0, or is this just some sort of anomaly that may happen occasionally.
One of our operators reported that the usual blue banner prompting upgrade appeared the day before but did not have an option on the banner to deny the upgrade. The next morning when she booted the computer, Windows 8.1 installed and we had to enter
the 8.1 MAK key and all appears to be well.
This is not really a complaint, just that we were VERY surprised when it happened, hoping it was not some sort of hack by a third party.
Jim Smith[REMOVED]
Lubbock Christian University
Technology Services
[removed]

Hi,
I don't know how useful this information will be for that many machines. This was also observed on 8.1 Pro, not Enterprise, but here is what I found while doing multiple different upgrades... just so I could figure out how to stop them...
Windows Update KB2973544 triggers Win 8.1 to automatically install.
http://support.microsoft.com/kb/2973544
In addition, KB3008273 appeared in Nov. 2014, which is also related to the automatic installation of Win 8.1... It actually replaces KB2973544.
http://support.microsoft.com/kb/3008273
Windows Update KB2871389 makes Win 8.1 available in the Store, and is a prerequisite for KB2973544 and\or KB3008273. You might uninstall it also.
https://support.microsoft.com/kb/2871389/en-us
I have found that the installation of KB2973544 and\or KB3008273 create Scheduled Tasks in Task Scheduler under *** Microsoft \ Windows \Setup***
They are...** 8.1 Auto Install Ping** and **8.1 Auto Install V2**. They are scheduled for 8pm Daily.
I clicked on both and selected "RUN", as I didn't want to wait several hours to see what happened... A download started immediately.
After downloading for about an hour, I restarted the machine to see what would happen... The download resumed quickly after the restart.
After the download started again, there were two more Scheduled Tasks added to the same location....   **Windows AutoUpdate Setup Resume Task**... which was running, and
**Windows AutoUpdate Setup Store Resume Task**... which is *Ready*, but has NEVER run.      There was a Service *Modern Setup Host* running in Taskmanager.
***I have found that the only way to stop the installation of Win 8.1 once the Scheculed Task ....   **Windows AutoUpdate Setup Resume Task** is indicating "At Logon" for it's Trigger,
is to end all the tasks showing, starting with that one, and then the ** 8.1 Auto Install Ping** and **8.1 Auto Install V2**.
After Ending the tasks Delete them...
After deleting the Tasks, I had to go to C:\ $Windows.~BT, which is a Hidden File, and delete anything that has a recent date... especially the .esd file (Install.esd) of 2.67GB..
I deleted anything that was newer than one week. You could probably delete everything inside the *Sources*, *Support*, and *Drivers* folders...
Also uninstall the mentioned KB's, starting with the newest, and doing the KB2871389 last, as it requires a reboot.
Any attempt to reboot the machine before doing this results in the installation of Win 8.1 starting...
If you were to End the tasks and disable or delete them while the **Windows AutoUpdate Setup Resume Task** is still showing a
Date and Time for it's trigger, deleting the $Windows.~BT files may not be necessary.
The biggest issue with this process is that you may be denied access to the $Windows.~BT folder. If that is the case, you will need to take Ownership of it.
If you disable and delete the Scheduled Tasks, and uninstall the previously mentioned KB's shortly after selecting *Remind Me Later*
THE FIRST TIME, the process will be stopped, and it won't be necessary to delete anything in the $Windows.~BT folder.
You should have about 24 hours to do this.
After uninstalling the KB's and deleting the scheduled tasks, a new scheduled task has appeared.
It is *Pre-Staged GDR Notification*, and is scheduled to run at *8PM of Every Thursday of Every Week*. My guess was that this is to remind you to install the Win 8.1 Update.
It actually causes another task to be created... *Windows Upgrade Notification Task*... It runs at the *Log On of Any User*
I couldn't get this task to show a notification. The task ran when I did it manually, but generated an error message in the log... *Specified Module Could Not Be Found (0x8007007E) Windows Upgrade Notification*
This is most likely because the KB's have been uninstalled.
I'm sure they can be disabled as well, if you want to stop\prevent the reminders.
I know that once Win 8.1 Update actually installs, those scheduled tasks no longer exist. In fact, the entire SETUP folder disappears.

Can't copy large files to AirPort Disk Using Windows 7

Hi Everyone,
I'm positng because I'm unable to copy large files to an AirPort Disk using Windows 7. I have the following setup.
AirPort Extreme:
- Firmware version: 7.6.1
- Airport disks secured by password
- No guest access allowed
- Airport Disk Preferences:
- Automatically discover airport disks is enabled
- Show Airport Disks in the system tray is enabled
External Drive:
- Western Digital 500 GB MyBook External Drive connected to Airport Extreme thru USB
- FAT32 Formated
Computers:
- 2 Toshiba Proteges, Both with 4GB RAM
- Both have Windows 7 Home Premium with Service Pack 1, 64-bit version
- (Sorry we have no MacBooks at home, just iPhones and iPods!)
Airport Utility:
- Version 5.6.1
Airport Disk Preferences Utility:
- Version 1.5.5.3
A week ago, I was able to copy over large files (videos <4GB in size) to the drive. Now, when I try to copy over these large files to the drive, the copy dialog box hangs. I receive a message stating that Windows is calculating the size, but then it doesn't copy over. Windows then gives me a message that it is unable to copy to the drive. When I test the drive connection by copying a small text file over, it copies over quickly and seamlessly. This problem occurs on both computers.
I am able to do the following with the drive connection:
- Read files
- Change file names
- Copy files from the drive to my computer
- See the contents of drive
I've tried all the combinations of the following with no success:
- Turning off Windows Search
- Downgrading the firmware
- Reconfiguring wireless adapter
- Rebooting computer
- Rebooting wireless router
- Rebooting external drive
The drive seems to be working fine except for when I want to copy <2GB files over to the drive. Does anyone have a solution that seems to work?
Thanks!

I'm happy to report that, after reformatting the drive to HFS+ (aka Mac OS Extended), there are no problems writing/copying large or small files to the AirDisk drive. I'm also happy to report that I am copying to the drive at a rate of roughly 4MB/s.
As I mentioned earlier, the only catch is that I am unable to plug the external drive directly into a Windows computer via the USB port as Windows is unable to read HFS+ formatted drives. (I can, however, plug the drive into a Mac computer as they can read HFS+ formatted drives. The only problem is that I don't own any Macs at this time! LOL!)
You're probably wondering how I formatted the external drive to HFS+ since I don't own any Macs. (Windows only allows you to format drives in exFAT, FAT, NTFS and the like.) That is a good question. Basically, I downloaded an open source formatting tool called, Gparted, which allows you to format any USB drive to any major file format system. Since Gparted is an open source tool, it is a little cumbersome to use. Once you figure out how to use it, it is a cinch to format the drive to HFS+. (Of course, an easier method would be to borrow a friend's mac, plug the drive into their mac, and format it to HFS+ using their mac.)
For a step-by-step guide on how to solve this problem, see the steps below:
1) Backup all data from external drive
    a) Fortunately, I have a 1TB ultraportable USB drive which has enough space to backup all data on the drive
2) Format the external drive to HFS+ using one of the methods below
    a) Plug it into a Mac and format it
     b) Use Gparted (free) to format it
3) Plug the drive back into the Airport Extreme
4) Start copying files over to your networked drive!
I hope this helps you! Cheers!

How I do schedule Airport reboot in windows?

Similar Messages

Maybe you are looking for