How I export from HDV to SD (DVD)... What about HD versions suitable for Macs and Pcs?

Hi,
      I have just finished editing a short movie based on some high res stills combined with some 1080i HDV footage.
   After completing the edit in CS4 (in a HDV 1080i environment) I went through Adobe Media Encoder in order to downsize and converting into an m2v file ready for my Encore project.
   As you probably well know this is far from satisfactory in terms of the down sampling capabities shown by AME as well as the lack of proper colour conversion.
So, after giving up on the Dan Isaacs method, AVI synth didnt seem friendly to this user... as well as the inability of CS4 to frameserve..
My solution was to exported the Microsoft AVI using the HUFFYUV codec at 100% - With Progressive scan, when ever I interlaced my output it showed obvious interlacing in my player, odd or even fields first...
I then used VirtualDub to do the down sizing
Finally Procoder 3 to convert to m2v.
The results still have no proper colour conversion properties but look much sharper than the regular CS4 encode using AME
   OK, that took an eternity to discover and still leaves me with another problem.
I want to export straight from CS4 to media type that can be played on both PC and Macs in HD.
Before I go down another gruop of dead ends and trial and error discoveries, could anyone here suggest a recomended and successful workflow?
   Many thanks,
Phil.

let me see if I can help out a little here.
The problem with converting 1080i to SD in software is that FCP seems to do a not-very-good job of downsampling the image, particularly when you are going directly to DV. Details get blurry, and other compression artifacts become quite noticeable. I have also experienced trouble with the HDV fields not getting processed correctly if I go to SD mpeg directly from an HDV timeline or movie file.
Your best bet is one of the following workflows:
Export a 1080i HDV or AIC movie file and re-import to FCP. Place this clip into an anamorphic SD sequence. It doesn't matter if the sequence is DV or Uncompressed if you send the sequence directly to Compressor from FCP, because this will ignore any rendered material and use an uncompressed image buffer as it encodes the mpeg. Do not letterbox your widescreen video if you are going to DVD - widescreen DVD video should always be full-frame anamorphic.
Your other option is to attempt to use Compressor to down-res the sequence or a self-contained movie of your HDV, starting with one of the advnace format conversion presets in Compressor. However, you'll have to cutstomize the preset by turning on the frame controls, and testing the settings to make sure you are happy with the result. Turning on frame controls will increase the ratio of your encoding time anywhere from 4 to 20:1.
I have tried all of these methods, and none of them look as good as capturing the downconverted video from the deck after mastering to HDV tape.
Hope this helps -
Max Average

Similar Messages

Export from FCP directly into DVD studio pro?

Is it possible to export from FCP directly into DVD studio pro? If not, what is the preferred file format because my exported quicktime files come up as "incompatible format" when I try to add them into my DVD project. Any help is appreciated.

You need to encode audio as well from Compressor. You'll have 2 files - audio and video.
Here's a tutorial:
http://www.youtube.com/watch?v=wFgJpd7DEWw
Message was edited by: Eric Pautsch1

How to Export from Numbers 09 to Address Book or print mailing labels?

I need to know how to export contact information that is part of a Numbers sheet to Address Book and to be able to print mailing labels. I do not have to print from Address Book but do need to produce address labels. I've tried a number of things from the help menus in Numbers 09, Address Book, Word and Excel for MAC 2011. I probably just don't have a grasp fo what I'm supposed to do. Thanks much!

nushuz,
I can sympathize if you're having trouble following the directions. Address Book will reject what looks like a perfectly good CSV file if it doesn't like the data it finds inside.
Here's what I have found to be the best way to create a CSV from Numbers for Address Book import...
Drag an Address Book contact to a Blank Sheet in Numbers. That's a Sheet in which you have deleted the default table.
This will give you a properly formatted table for conversion to CSV, and you just have to add all your contact data to the table you just created. Before you begin though, it's a good idea to Unhide all Hidden Columns, and there are probably many. Hover over any Column Label and click the menu triangle, selecting "Unhide All Columns", or words to that effect.
After you have all your data situated in the table, Share > Export > CSV and then Import to Address Book.
Jerry

How to export from lightroom to premeire pro?

How to export from lightroom to premeire pro?

You cannot export directly from Lr to another program.
You have to export to your hard drive and then open them in Premiere.

How to export from Address Book to Microsoft Outlook

I am using a mail merge program that requires cvs or test files of address cards in order to operated. I can't figure out how to export from Address Book in any other format than Vcard. Does anybody know how to either export in text or covert Vcard files to text or CVS?

Try Address Book Exporter.

How to Export from table view to Excel (not BI query)?

There is a 'How to' document explaining how to export from an iView using a BI query:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/47fe4fef-0d01-0010-6f87-ed8ecb479123
However:
This 'How-To' document is using an example of a BEx query. I am not using a BEx query, therefore I do not have an "Info port". How can I download to Excel from a table view that is not an iView of a BI query? (It is just a internal table coming from a BAPI).

keenneth,
i am using the query from SQL server, i am having the same problem of not having info port. so did you find a work around for exporting to excel with filters for non sap queries ?
any body who had come across this situation , plz guide me.
thanks in advance
ravi

How to copy from an external hard drive collection to a folder on your mac?

I put 2000 images from my honeymoon on an external hard drive. I flag my favorites and work on 7 images i layter but in an collection. I am really proud of this 7 images and want to put them in my portfolio map on my laptop. BUT that seems to be impossible! I have the choice to move the files from the external hard drive or make a virtual copy! I want them in bout my external hard drive and laptop! This is turning out to be a mess. What to do now? And how to prevent this in the future?
What is the best way to manage and storage images?
If I only could copy an collection! SO FRUSTRATING.
Please help me

I am really proud of this 7 images and want to put them in my portfolio map on my laptop.
In Lightroom, select the 7 images, then use File->Export, and make sure the exported photos wind up in the desired location.
What is the best way to manage and storage images?
I would manage the photos inside of Lightroom using keywords, captions, flags, star ratings and any other Lightroom organizational tool that seems appropriate. I would then use Lightroom as the mechanism for searching for and locating and displaying whatever photos you are interested in finding. If you need copies of the photos for non-Lightroom use, as in your example of 7 images, then use File->Export.

How to partition my drive for Mac and XP use? from a novice

I would like to use my MacBook Pro for both Mac ad PC programs (Office and others) and hear that I can partition the drive. How is the best way to do that? Also I have an external Seagate FreeAgent GoFlex external drive to set up that supposedly can back up both Mac and PC without formatting each time. Do I have to partition the drive first? Do I use Time Machine?

Is it your intent to run Windows programs on your computer? If so then this is more than simply a partitioning exercise.
In order to use an external drive on both Macs and PCs there are two options. Option One is to partition and format the drive MBP and FAT32, respectively. OS X can read/write a FAT32 formatted drive. However, due to filesystem differences some features of the OS X filesystem are not supported by FAT32, so FAT32 is not the best choice for transferring OS X documents, but would be fine for transferring Windows documents.
Option Two is to partition the drive using GUID then creating two partitions. One partition is formatted Mac OS Extended, Journaled and the other partition is formatted FAT32. Each partition can be used for the data from the appropriate platform.
TM is not a file transfer program, cannot be used for Windows documents, and does not work on Windows.
If you wish to run Windows on your Mac then see the following:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows. You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Is it possible to export contacts from Outlook 2011 for Mac and importing this file back into Mac Address Book.? please reply me its urgent

Is it possible to export contacts from Outlook 2011 for Mac and importing this file back into Mac Address Book.? please reply me its urgent

Is it possible to export contacts from Outlook 2011 for Mac and importing this file back into Mac Address Book.? please reply me its urgent

How do I preserve the embedded hyperlinks when printing to .pdf?   I am using Acrobat Pro XI for Mac, and when I export to .pdf the existing hyperlinks lose functionality.   I assume it's just the flick of the right button – I just need help finding that

How do I preserve the embedded hyperlinks when printing to .pdf?
I am using Acrobat Pro XI for Mac, and when I export to .pdf the existing hyperlinks lose functionality.   I assume it’s just the flick of the right button – I just need help finding that button.
Can you help? Thanks!

How: MS Word to .pdf by Command P, hitting the PDF button, and then the button for "save as Adobe pdf"
I didn't have this problem at all on prior versions of Adobe on my PC.   This isn't a Mac attack, is it?

I asked this question before but I can't find it now. Anyway, I'm trying to import a DVD video that was made on a MAC and use it on a new iMovie project.

I asked this question before but I can't find it now. Anyway, I'm trying to import a DVD video that was made on a MAC and use it on a new iMovie project.
How do I do the importing.

If the video is already on a DVD:
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

Dvd Menu Adobe Premiere Elements 10 for Mac with bad resolution

Hi, I use a MacBookPro with Mac OS X 10.6.8 - Intel Core i5 2,4 GH - RAM 4 GB.
I just purchased PRE 10 version hoping to solve a problem I had with version 9 for Mac but not with a version 7 for Win.
I
My problem is that when I burn the dvd with the final work in PAL system, the menu of the DVD has the text very blurred at a very bad resolution.
I searched this forum and I didn't found a similar problem for Mac user.
I had the same problem with PRE 9.
Same problem if I insert a logo in the corner of the video. Very bad resolution image in the final dvd.
I tried to change the beginning resolution of the image from very low to very high and the result was the same.
Someone has similar problems? Someone did find a way to solve it?

Dear Bill, many thanks for your answer.
This is the Project Preset chosen.
As the source is a JVC Everio with hard disk, I chose PAL - Hard Disk - Widescreen 48 KHz
The source is as I said a JVC Everio in SD size. I saved the files in a backup Hard Disk. They are .mod files.
I don't know how to see if a Menu Sets is HD or SD. I tried almost all the available Menu Sets always with the same blurry results.
These images explain better than words.
Note that the firt image in the DVD Menu is perfect, not blurry. And this add a little bit of mystery :-)
this is the scene selection that has text blurry
And this is the logo I put in the right bottom side of the video. It is blurry. I put a high resolution image and it was blurry. Then I tried with an image .png with the same width of the video (720 pixels) and this is the same blurry effect:
The solution I use in these days to have goog results is very time expensive.
I make the editing work in my mac, without logo and menu. I make a dvd. Then I import the VIDEO_TS folder in my old pc, with my old version of Adobe Premiere 7.0. I insert the logo, I make the menu and then I make a dvd with my old PC and the resolution is the one I want.
Obviolusly I'd like to do all the work in my Mac...
The same problems and solution I used also with PRE 9.0
By the way, I'm using Adobe Premiere Elements in my Mac instead iMovie because I need to do videos longer than 2 hours. And iMovie has this limit.
Many thanks in advance for help. There is someone that is using Mac and PRE 10 with GOOD results?

Before I transfer files from my PC to the new imac should I load office for Mac and parallees? Will this mean I have to open the new account on my imac first and thus have two user accounts when I transfer the PC? I would prefer to only have one account.

IIt was in my mind to load office then transfer. After to load paralels and transfer my windows system. I have a new copy of office for Mac plus paralels PC to Mac transfer version 8. As this is my first mac (I have ipads and iphones) I am unsure of what to do. Also to confuse matters I use a windows laptop as my sync machine for the phones and ipads (i do have a cloud account with backup) can I transfer both machines to my new imac? I will have a 1tb fusion drive + 2tb time capsule although I only have less than 400GB of data on both machines. Hope this is not too confusing for everyone but I am looking forward to sorting this mess out by just using the one machine.

Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant. If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.

I installed mountain lion os on my mac book pro and now Word for Mac and my Fluenz Spanish programs do not work. How can I go back to my original OS? Thanks

I installed Mountain Lion OS on my Mac Book Pro and now WORD for Mac and Fluenz Spanish program do not work. How do I reinstall original OS and scrap ML?
Thanks

My previous answer still stands: Restore from your backup taken before you upgaded to Mountain Lion. For example, a Time Machine backup, a Carbon Copy Cloner clone, or a commercial backup service. Not the disk that came with your computer (which is how I read "OS back up disk").
If you reinstall the original OS from the disk that came with your computer, it will wipe out everything on your computer. (The installer won't install an older OS over a newer one, so you'll have to wipe the disk first.) Then you'll need to restore your data from your backup and reinstall applications like Word.

After updating to iOS 6 my iPod Touch 4th.Gen is virtually unusable ... does anyone know how to sue Apple since they gave no warning about iOS 6 being for iPad optimisation and a killer for iPods ?

After updating to iOS 6 my iPod Touch 4th.Gen is virtually unusable ... does anyone know how to sue Apple since they gave no warning about iOS 6 being for iPad optimisation and a killer for iPods ? Before I throw away my iPod Touch does anyone know if Apple intends to rectify their obnoxious disregard for iPod users by issuing another 'upgrade' which will allow iPods to work without the constant system crashes that iOS 6 has caused ?

Contact a lawyer if you want to sue.
Otherwise try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

How I export from HDV to SD (DVD)... What about HD versions suitable for Macs and Pcs?

Similar Messages

Maybe you are looking for