How i turn off the cinema display?

How i turn off the cinema display?

Unfortunately there is no on off switch.
The best you can do is sleep the display or
unplug it.
I don’t know what unplugging it will do/cause.
You can try it.
Thanks ... Ken

Similar Messages

  • Canon Vixia HF R20 - How do I turn off the date display?

    How do I turn off the date display on my Canon Vixia HF R20? I do not want the date on my videos. I searched the manual and googled it and can't find an answer.

    Hello DaisyKary,
    When shooting with the VIXIA HF R20 you would be able to turn off most of the displays by pressing the [DISP. Batt. Info] button through a cycle.  It will change what is displayed on the camcorder's LCD panel.
    If this is an urgent technical support matter I would urge you to contact Canon technical support directly for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HT4314 Does anyone know how to turn off the pics of your Game Center friends showing on the right side of the screen while playing a game?

    Does anybody know how to turn off the pics of your Game Center friends that show while you're playing a game?

    Swamava,
    Thank you for the link you provided and I am glad I am not the only one with this problem, however beforeI install Adblock is it a free program or is there a fee you
    must pay to download the program? I am some what hesitant to be oblighted to
    a monthly or yearly bill.
    i

  • MiniDisplay to HDMI : How to turn off the Dual Monitor output when..

    miniDisplay to HDMI : How to turn off the Dual Monitor output when the adapter is attached and the TV is off ? And will keeping the adapter connected even if it is not in use, cause damage to the adapter ?

    I have my external monitor/tv setup of the left. If I leave the adapter attached with the TV off, I am still able to cross the border/boundry of my MBP screen ! As instead of detecting a TV, the MBP is detecting the adapter as a screen. I do not want to damage my thunderbolt/miniDisplay port by plugging and unpluggin the unit each and every time.

  • Turn off the iMac display

    Can i turn off the iMac display if i want use only external monitor?

    Sorry, OS X doesn't allow for that.

  • TS3988 how to turn off the passcode after phone is located

    how to turn off the pass code after you have found your phone with i cloud

    Enter the passcode on it to unlock it, then you can turn off the passcode lock in Settings>General>Passcode Lock.

  • Please help me to find out how to turn off the shuffle feature on my touch i-pod, Please help me to find out how to turn off the shuffle feature on my touch i-pod

    Please help me to find out how to turn off the shuffle feature on my I-pod nano ... THANK YOU!!!!!! :)

    Just figured it out :) Thanks though!!!

  • HT5372 how i turn off the icloud symbol so that i can share with my sons laptop

    how i turn off the icloud symbol so that i can share with my sons laptop

    Which icloud symbol?  The one in System Preferences on a mac or in Settings on an iDevice?

  • Aladdin eToken using the Web browsing with Firefox. Firefox often asked to enter a password eToken. How to turn off the continuous requests?

    Aladdin eToken using the Web browsing with Firefox. Firefox often asked to enter a password eToken. How to turn off the continuous requests

    I have found a solution.
    For all they wont use a etoken to surf.
    Go to extras, options then extendet and go to cryptographic module and unload the etoken. To unload the etoken you must selekt etoken not the name of the token.
    i have translate the menu names from german to english.

  • Could you please tell me how to turn off the email sign-in and password function when I open Itunes on my computer - I don not wish to sign in every time

    could someone please tell me how to turn off the email sign-in and password function when I open Itunes on my computer - I don not wish to sign in every time

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Someone PLEASE tell me how to turn off the community emails being sent to my email. there are hundreds of them

    SOMEONE PLEASE TELL ME HOW TO TURN OFF THE COMMUNITY EMAIL BEING SENT TO ME. THERE ARE THOUSANDS IN MY EMAIL. I HAVE TO SPEND HOURS DELETING THEM. SOMEONE PLEASE TELL ME HOW TO TURN IT OFF!! PLEASE HELP ME! THANK-YOU
    <Email Edited by Host>

    Follow these instructions
    https://discussions.apple.com/static/apple/tutorial/email.html

  • My  BEATS speakers are connected to my Mac but I have no audio and do not understand how to turn off the speaker. I press the power button and not shut off. And the white light behind me indicating that this synchronized, does not turn off ever.

    My  BEATS speakers are connected to my Mac but I have no audio and do not understand how to turn off the speaker. I press the power button and not shut off. And the white light behind me indicating that this synchronized, does not turn off ever.

    Hello Sabroso007
    Check out the article below to troubleshoot the sound output to your Bluetooth speaker. Check in System Preferences > Sound to see what the output is set to.
    OS X Mavericks: Set up Bluetooth audio devices
    http://support.apple.com/kb/PH14217
    Regards,
    -Norm G.

  • S1 Yoga - How to turn off the built-in display/mo​nitor?

    Hi,
    Trying to find a way/hotkey to turn off the built-in display whilst I'm connected to another external monitor with the Thinkpad S1 Yoga model. Do you guys know how to do it?
    I could even remap any of the default hotkeys if someone knows how to do that as well, as the defaults are not too useful for me...
    Thank you!!
    Solved!
    Go to Solution.

    Hi Mickael28,
    Thank you for the reply!
    You can set the under power settings, to perform please go to control panel -- power option, in that click on ‘Change plan settings’ and click on ‘Change advanced power settings’, you will get new window with ‘Advanced Settings’ go to Display option and under ‘Turn off display after’ change the setting as per your requirement.
    Turn off Display after
    Hope this helps!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How to Turn Off the Smart measurements box off in CS4 MAC

    We just switched to CS4 at the office and I found a new anoying feature to me. When I resize or move a box in the page, a black box with measurement appears near my cursor. I truned off the "smart guide" in view and I un-checked all the smart guide option. Please tell me how to took that off please!

    I agree with Sandee that the transformation values are a great feature, and I wouldn't think of turning it off. It's not accessible from the contextual menu, only from preferences.
    Robert, holding down the Control key on the Mac (after you start moving an object), disables the display of smart guides, but not of transformation values. The only way to turn off transformation values is to turn off the preferences Sandee mentions in post #1.

  • How to turn off the Monitor???

    Hey friends!
    Is it possible to turn the Monitor (Display Device) ON and OFF from a java application???
    Thanks a lot!
    Ricardo

    Hi! This is completely Windows-specific, and I found it on a website, so I don't take credit for it. Hopefully you do know how to use JNI, so here's the C code you could try out (no I haven't tried it yet).
    JNIEXPORT void JNICALL Java_JNative_turnOffMonitor (JNIEnv *env, jclass cls)
        SendMessage (HWND_BROADCAST, WM_SYSCOMMAND, SC_MONITORPOWER, 2);
    }2 turns off the monitor, HWND_BROADCAST sends the message to all top-level windows, 1 sets the monitor to low power and -1 switches the monitor back on. Please use at own risk, and you'll probably want to have some more error handling in your code if you do plan to use it. You will need to include windows.h and user32.lib (unless you are dynamically linking) for the code to compile.
    Hope it helps.
    Cheers
    P.S. Here's the website I found it in (note, the code's in Delphi, so I just took the API calls, and modified the first parameter to HWND_BROADCAST). http://chiragdalal.tripod.com/howto/monitor_on_off.html

Maybe you are looking for

  • Reg: Container elements

    Hi, I'm doing a bpm scenario where i recieve a file using receive step then use a switch to check if a condition satisifies based on that I'm sending to File using send step and in other block using Mail. Im getting error as container elements not in

  • Is it a Bug of JDK?

    JSlider m_Slider = new JSlider(); m_Slider.setMajorTickSpacing( 10 ); m_Slider.setSnapToTicks( true ); when the system use windows lookandfeel,it works properly,but if the system use MetalLookAndFeel, the last sentense doesn't work,I use jdk1.4.1 is

  • Info records vs contracts

    Hi All, We are in the process of defining master data required for procurement.. For direct materials we always have contrcats .. so if we use only contracts without creating any info records what would be the implications?? As contract and info reco

  • Need help with a part of my Applet.

    When I run this applet, it is supposed to set the text of JLabel "questions" to the next question in the ArrayList "YourQuestions" and clear the textfield. But every time I click the "Next" JButton, all it does is clear the textfield. Why is this and

  • Can I enable 802.11b/g on individual radios instead of globally?

    I am deploying 400 new APs. There is an existing wireless network. I need to turn up some of the radios before I turn up the rest. Right now I have 802.11b/g network turned off globally across all controllers. What I want to know is can I enable 802.