How influence the framework/plot area off a diagram?
Hello together.
I have the following problem. In a report a bar chart is to be represented beside a table. Unfortunately the individual lines of the diagram do not fit the table. A cause is a small framework around the plotting area. How do I become loose this frameworks? Or are there other possibilities? Basis is at present still a BW 3.1 system.
Thanks.
hi there
use the color - Tool, select transparent for background and foreground color and click on the control.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"
Similar Messages
-
I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic
What device?
What format?
How are you importing it?
Can you find the external audio with Finder?
Where is your destination file when you import it?
Andy -
Hi my daughter managed some how to delete the app store icon from my home screen and I cannot seem to be able to find it can anyone help
The App Store app cannot be deleted (it also can't be downloaded and isn't part of any backup, so ignore the other comment) so either she moved it to another home screen, dropped it into a folder, or turn off "Installing Apps" in the General/Restrictions settings.
If you check Restrictions and Installing Apps is turned on and you can't find the App Store app otherwise, you can go to the General/Reset area and reset the Home Screen Layout. That should get it back.
Regards. -
In LV6.1 the order in which plots are written to an XY graph is in reverse order from the order they appear in the array of plots that is feed to the XY graph control. Thus at places where �Plot 0� intersects �Plot 1�, the �Plot 0� data appears in front of the �Plot 1� data. I would like to reverse this without switching the order the plot array is built-up. Is this possible? I�ve attached a vi that demonstrates what I�m taking about. In my application I have many �highlights� that I do NOT want to list in the plot legend but that I wish to plot �over� the channel data that IS listed in the legend.
Thanks
Attachments:
plotOrder.vi 42 KBThanks for this idea. I misunderstood what you meant until Jeremy responded saying you were �right on the money�. I thought you meant that putting another plot in the array but making it transparent was going to help somehow, but now I understand that you mean plotting the �up front� data to a separate XY graph indicator which is transparent and overlaying the original XY graph. I may wind-up doing this. I�m just not excited about linking all the scaling info from one graph to the scaling of the transparent graph and creating the necessary event handling so that when the user scales one graph or changes the auto-scaling, the other graph�s scales gets updated, but perhaps it�s the only way. Thanks again for your input.
-
What is the best way to track a stolen ipod touch 4th generation if the locations services are off
What is the best way to tracker a stolen ipod touch 4th generation it the locations services are off
you will have to use the old fashioned way, like if you lost a wallet or purse.
-
The displays are all out of whack and when I open and use Apps, they slide around. Last night my 2 yr. old banged on the keyboard and obviously did something but I can't figure out how to restore the settings. The task bar and dock aren't able to be seen in the same screen anymore, I have to scroll down a bit to get toone of them.
This may be simple to fix.
Move your cursor all the way to the upper left, select > System Preferences > Personal > Universal Access > Seeing tab.
Turn "zoom" off. -
I'd used the previous bootcamp and win xp just fine. Just bought a new mac mini and a new copy of windows 7 (well, an upgrade where I did the clean install approach). I have this mac mini approached to an LCD tv using an HDMI connection.
No matter what I've tried, I can't force the desktop to not be off the edges (unless I go to a super small resolution where it looks crappy).
The Lion/mac operating system does just fine with the LCD/HDMI connection. In Windows, I've played around with the resolutions, ran an update for the graphics driver, and checked my TV settings for an "overscan" setting.
None of the above worked.
I tried looking in the windows settings for something with the graphics card but I think I'm looking in the wrong area. I've seen discussion boards talk about a "just scan' setting but I can't find that on my TV menus or in windows.
Any suggestions?
Thanks.No one?
I've been doing more research and it seems the issue may be in some setting with the graphics card but for the life of me I haven't been able to find it. I have the new mac mini. Anyone?
Thanks. -
How calculate the percentage of area...
Hi,
I have 4 tables:
Tab AREA_TI
LS_ID FL AREA
EMS00046 P01 2.995,09
EMS00046 P02 0,78
EMS00046 PTE 1.435,48
EMS00046 S01 1.684,80
EMS00046 S02 1.694,12
EMS00050 P01 1.111,60
EMS00050 P02 1.054,16
EMS00050 P03 1.117,05
EMS00050 P04 1.087,24
EMS00050 P05 1.117,85
EMS00050 P06 646,99
EMS00050 P07 249,48
EMS00050 PTE 593,35
EMS00050 S01 91,15
EMS00011 P02 446,90
EMS00021 PTE 0,71SUM AREA_TI is:
LS_ID SUM(AREA)
EMS00011 446,90
EMS00021 0,71
EMS00046 7.810
EMS00050 7.068Tab AREA_T0
LS_ID FL AREA
EMS00046 PTE 15,48
EMS00050 PTE 15,33
00001156 P01 3.379,82
00001156 P02 3.731,25
00001156 P03 2.686,88
00001156 PTE 2.279,49
00001156 S01 7.341,05SUM AREA_T0 is:
LS_ID SUM(AREA)
00001156 19.418
EMS00046 15,48
EMS00050 15,33Tab AREA_FI
LS_ID FL AREA
04600411 P01 785,64
04600411 P02 829,72
04600411 P03 832,36
04600411 PCO 11,88
04600411 PTE 473,91
04600411 S01 1.740,42SUM AREA_FI is:
LS_ID SUM(AREA)
04600411 4.673Tab AREA_EM
LS_ID FL AREA
00307374 P01 4.269,59
00307374 P02 8.362,79
00307374 P03 770,96
00307374 PTE 7.292,11
00307374 S01 1.425,90
00602037 P01 3.364,47
00602037 PTE 9.764,71
00602037 S01 75,17SUM AREA_EM is:
LS_ID SUM(AREA)
00307374 22.121
00602037 13.204I'd like to get these results:
LS_ID AREA_TI AREA_T0 AREA_FI AREA_EM AREA_TOT PERC_T0 PERC_FI PERC_TI PERC_EM
EMS00011 446,90 0 0 0 446,90 1
EMS00021 0,71 0 0 0 0,71 1
EMS00046 7810 15,48 0 0 7825,75 0,00197 0,99803
EMS00050 7068 15,33 0 0 7083,33 0,00216 0,99784
00001156 0 19418 0 0 19418 1
04600411 0 0 4673 0 4673 1
00307374 0 0 0 22121 22121 1
00602037 0 0 0 13204 13204 1PERC_T0=AREA_T0/AREA_TOT
PERC_FI=AREA_FI/AREA_TOT
PERC_TI=AREA_TI/AREA_TOT
PERC_EM=AREA_EM/AREA_TOT
I tried this:
CREATE OR REPLACE VIEW PERC_AREA ( LS_ID,
AREA_T0, AREA_FI, AREA_EM, AREA_TI,
AREA_TOT, PERC_T0, PERC_FI, PERC_TI,
PERC_EM ) AS
SELECT A.LS_ID,
SUM(nvl(A.AREA,0)),
SUM(nvl(B.AREA,0)),
SUM(nvl(C.AREA,0)),
SUM(nvl(D.AREA,0)),
SUM(NVL(A.AREA,0)+NVL(B.AREA,0)+NVL(C.AREA,0)+NVL(D.AREA,0)),
SUM(A.AREA)/SUM(NVL(A.AREA,0)+NVL(B.AREA,0)+NVL(C.AREA,0)+NVL(D.AREA,0)),
SUM(B.AREA)/SUM(NVL(A.AREA,0)+NVL(B.AREA,0)+NVL(C.AREA,0)+NVL(D.AREA,0)),
SUM(C.AREA)/SUM(NVL(A.AREA,0)+NVL(B.AREA,0)+NVL(C.AREA,0)+NVL(D.AREA,0)),
SUM(D.AREA)/SUM(NVL(A.AREA,0)+NVL(B.AREA,0)+NVL(C.AREA,0)+NVL(D.AREA,0))
FROM AREA_T0 A, AREA_FI B,AREA_TI C, AREA_EM D
WHERE A.LS_ID=B.LS_ID(+)
AND a.LS_ID=C.LS_ID(+)
AND a.LS_ID=D.LS_ID(+)
GROUP BY A.LS_ID
How can I create a oracle view to get percentage of area FOR ALL LS_ID present in the 4 tables??
Thanks!!!Hi Barbara
your query seem not correct
I tried this:
CREATE OR REPLACE VIEW X ( LS_ID,
AREA ) AS select ls_id, sum(area_locali) area
from area_ti
group by ls_id
union all
select ls_id, sum(area) area
from area_t0
group by ls_id
union all
select ls_id, sum(area) area
from area_fi
group by ls_id
union all
select ls_id, sum(area) area
from area_em
group by ls_id
create or replace view PERC_AREA
AS
select x.ls_id,
area_ti.sum area_ti,
area_t0.sum area_t0,
area_fi.sum area_fi,
area_em.sum area_em,
area_tot.sum area_tot,
area_t0.sum/area_tot.sum perc_t0,
area_fi.sum/area_tot.sum perc_fi,
area_ti.sum/area_tot.sum perc_ti,
area_em.sum/area_tot.sum perc_em,
round(area_tot.sum*100/area_gen.sum,2) perc_lsid
from (select distinct ls_id
from x) x,
(select ls_id, sum(area) sum
from area_ti
group by ls_id) area_ti,
(select ls_id, sum(area) sum
from area_t0
group by ls_id) area_t0,
(select ls_id, sum(area) sum
from area_fi
group by ls_id) area_fi,
(select ls_id, sum(area) sum
from area_em
group by ls_id) area_em,
(select ls_id, sum(area) sum
from x
group by ls_id) area_tot,
(select sum(area) sum
from x) area_gen
where x.ls_id = area_ti.ls_id(+)
and x.ls_id = area_t0.ls_id(+)
and x.ls_id = area_fi.ls_id(+)
and x.ls_id = area_em.ls_id(+)
and x.ls_id = area_tot.ls_id(+)
What do you think about solution?? -
How remove the values which are entered in filter attributes of VO
Hi,
On top of one VO we are performing search using bind variables.
To refine the search we have added filterable="true".
Now when we perform seach and then we have filtered using one column we got result and we proceeded.
When we come to this screen again when i perform search with the bindvariable and click on search then the previously applied filter is also getting applied
becuase the value in that filter is still there.
So How can i remove the value which is entered in filter attribute of the VO programatically.
Please help me.
Regards
Gayazwould this help you:
http://adfscopes.blogspot.com/2011/03/programatically-clearing-filter.html -
How do I change the number of plot areas in a Mixed Signal Graph
How do I *programatically* change the number of plot areas in a Mixed Signal Graph? I recognize that the developer can choose to add or remove a plot area during edit mode but I want to select between 2 or 3 visible plot areas and scale the plot areas appropriately. Is there a property that tells me how many plot areas (or yscales) there are? I also need a property that I can write to as to set the number of plot areas available.
Aside from manually making too many plot areas and then hiding the unneeded plot areas how can I do this?
JonathanHello,
I don't think that is possible - I searched the property and invoke nodes but didn't find something to do that. This would make a great product suggestion though, which you can submit (it goes directly to R&D) by clicking the word feedback in the bottom left corner of the Contact NI page linked below:
Contact NI:
http://sine.ni.com/apps/utf8/nicc.call_me
Best Regards,
JLS -
Charts: how do I determine when the mouse is in the plot area
I'm trying to implement logic that will do the following:
Panning plot within plot display area by clicking and dragging mouse
If the user clicks and drags in the chart plot area (the region where the chart plot actually displays, not including the axes, legends, titles, etc.), I want to be able to provide the effect of panning the plot (e.g. similar to grabbing and dragging a map in Google maps) within the plot display. This makes the most sense, of course, if the user has zoomed in to some level and the entire plot is no longer fully visible within the display.
Zooming on a plot
If the user places the mouse somewhere in the chart plot area and uses their mouse wheel, I want to be able to provide the effect of zooming in and out of the plot. The plot area itself must remain at its original size, just the representation of the plot needs to simulate the effect of being zoomed in or out on.
Thoughts, suggestions, ...
To make the zoom and pan effect, my thought was to adjust the axes bounds as appropriate to simulate these effects. The trick for some of what I'm planning on doing is finding out where the mouse is in the plot area (not the whole chart) so that I can find the x,y offsets from the plot origin (which appears to be in the upper left - at the chart level anyway). For panning, I don't think I care what the offset is, just that it's within the plot. For zooming, I may need to know where the mouse is in the plot so that the zooming could be centered on that location in the plot. This makes me think that it would also be helpful to find out how to translate the mouse x,y pixel position to a corresponding x,y value in the plot data domain.
I've been experimenting with attaching event handlers to detect various mouse actions and what information can be gleaned from these events. So far I have not found anything that allows me to determine the bounds of the plot region in the overall chart. I can get the mouse x,y position, but I don't know where it is in relation to the plot area bounds. I don't want to initiate a pan of a plot if the user happens to drag their mouse somewhere outside the plot area (i.e. over an axis, legend, etc.). Also, it would not make sense to start a zoom on the chart unless the mouse is over the plot.
Please let me know if this seems to be a reasonable approach, and if not, please suggest any ideas for alternatives. Any help, ideas and suggestions regarding how to solve these issues and/or determine this information would be welcome.I experimented a bit and it seems the plot-content is the Group containing, well, the content of the plot. So in a line chart it's the smallest rectangle containing all the lines and the graphic at the data point (little circles, by default). What you probably need instead is the chart-plot-background.
Here's a quick example of a panning chart. There are probably better ways to manage the mouse dragging (it behaves somewhat badly if you drag out of the plot area and then back in, for example) but it gives you the basic idea. My original idea of adding a mouse directly to the plot area failed as the event doesn't get propagated to the plot region if you click on part of the plot content (a line, for example).
import java.util.Random;
import javafx.application.Application;
import javafx.beans.property.DoubleProperty;
import javafx.beans.property.SimpleDoubleProperty;
import javafx.collections.FXCollections;
import javafx.collections.ObservableList;
import javafx.event.EventHandler;
import javafx.geometry.Point2D;
import javafx.scene.Scene;
import javafx.scene.chart.LineChart;
import javafx.scene.chart.NumberAxis;
import javafx.scene.chart.XYChart.Data;
import javafx.scene.chart.XYChart.Series;
import javafx.scene.input.MouseEvent;
import javafx.scene.layout.BorderPane;
import javafx.scene.layout.Region;
import javafx.stage.Stage;
public class PanningChart extends Application {
@Override
public void start(Stage primaryStage) {
final NumberAxis xaxis = new NumberAxis("x", 0, 10, 1);
final NumberAxis yaxis = new NumberAxis("y", 0, 100, 10);
final LineChart<Number, Number> chart = new LineChart<>(xaxis, yaxis);
chart.setAnimated(false);
chart.setData(createData());
final Region plotArea = (Region) chart.lookup(".chart-plot-background");
final DoubleProperty lastMouseX = new SimpleDoubleProperty();
final DoubleProperty lastMouseY = new SimpleDoubleProperty();
chart.setOnMousePressed(new EventHandler<MouseEvent>() {
@Override
public void handle(MouseEvent event) {
final double x = event.getX();
final double y = event.getY();
if (plotArea.getBoundsInParent().contains(new Point2D(x, y))) {
lastMouseX.set(x);
lastMouseY.set(y);
chart.setOnMouseDragged(new EventHandler<MouseEvent>() {
@Override
public void handle(MouseEvent event) {
final double x = event.getX();
final double y = event.getY();
if (plotArea.getBoundsInParent().contains(new Point2D(x, y))) {
moveAxis(xaxis, x, lastMouseX);
moveAxis(yaxis, y, lastMouseY);
final BorderPane root = new BorderPane();
root.setCenter(chart);
primaryStage.setScene(new Scene(root, 600, 400));
primaryStage.show();
private void moveAxis(NumberAxis axis, double mouseLocation,
DoubleProperty lastMouseLocation) {
double scale = axis.getScale();
double delta = (mouseLocation - lastMouseLocation.get()) / scale;
axis.setLowerBound(axis.getLowerBound() - delta);
axis.setUpperBound(axis.getUpperBound() - delta);
lastMouseLocation.set(mouseLocation);
private ObservableList<Series<Number, Number>> createData() {
final ObservableList<Data<Number, Number>> data = FXCollections
.observableArrayList();
final Random rng = new Random();
for (int x = 0; x <= 10; x++) {
data.add(new Data<Number, Number>(x, rng.nextDouble() * 100));
return FXCollections.singletonObservableList(new Series<Number, Number>(data));
public static void main(String[] args) {
launch(args);
998038 wrote:On a slightly different (but related) subject, where can I find an up-to-date source of information that describes the IDs and class names that JavaFX uses? I assume the ".plot-content" is pertaining to the ID of the chart plot area (or plot "child" of the chart?). Where can I find the names of the various objects that can be "looked up"?I generally try to avoid lookups as they feel a bit fragile. However occasionally there seems to be no other way, as in this case. The [url http://docs.oracle.com/javafx/2/api/javafx/scene/doc-files/cssref.html]CSS reference guide documents the css class substructure of each Node type. -
How can I plot the 3d plot of a vibrating bridge?
Dear all
My question is as follows:
I want to plot the mode shape of a bridge. Now the deck of the bridge is vibrating, which can be plot. But at the same time; I want to plot the column of the bridge
The question is: when some surface of the 3d plot are vibrating, which means animated plot.How can I plot the stationary multiple curves at the same time.
The attached file is one example, but always the mutiple curves disappear when the surface vibrating.
PS: My VI version is 8.0 How can I save the VI as version 7.x or 6.x, version 8.x seems too new.
Any reply will be appreciated! Many thanks!
Attachments:
format line plot.vi 32 KB
3D plot of mode shape.vi 33 KB
format 3D.vi 31 KBSorry,the attached VI should be as follows since there is not data in the array in the previous VI
Attachments:
format surface plot.vi 20 KB
3D plot of mode shape.vi 31 KB
format 3D.vi 27 KB -
I have a mixed signal graph that allows me to drag and drop my traces between the plot areas, then it stops allowing it.
If I start with a new graph it allows it but eventually stops allowing it.
I have 4 XY charts feeding the one mixed singal graph through a bundle function, then I run it once and drag my traces to the correct plot area
and hope that it keeps working.
Best Regards
Tim C.
1:30 Seconds ARRRGHHH!!!! I want my popcorn NOW! Isn't there anything faster than a microwave!Hi Tim,
That sounds like some interesting behavior. Can you reproduce what you were seeing, or have you continued to be able to drag the signals to other plots since you saved and reopened your program?
Jennifer R.
National Instruments
Applications Engineer -
Hi all,
I am new to the forum and so very desperate for help!
I have a T42P (2373-C61) machine. All of the sudden today, it blue-screened. I turned it off, then tried to turn it back on.
Now, it is not coming up at all. I can not even get to the BIOS or see anything in the screen!
All the lights/indicators are off except these two: the battery/power and the little z (the on indicator).
The NumLk and Caps Lock indicators flash every 15 seconds or so.
The hard drive, bluetooth, and wireless lights are off completely.
Tried getting to the BIOS by unplugging the battery and using the AC only but nothing happens when I press F1 or the IBM button.
Also, tried a suggestion from other users that requires unplugging Battery/AC, pressing Power button 10 times, then the 11th time for 30 sec. Still nothing happens.
No HW/SW was added to the machine recently...
Any suggestions is appreciated..It can also be the LCD itself...
BTW, if the graphic card has failed that equals motherboard replacement since it's soldered to the planar...
Let's hope not...
Good luck and keep us posted.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
How to get bar plot stacked in one graph?
Hi there,
I am having a problem trying to get a stacked bar plot in one graph. I attached two images to show you what it looks like now and how I would like it to look.
At the moment I am making two x,y clusters, bundle these into an array and give that as input to the XY graph. This gives me the image where the bar plots are shown next to each other. However, I want them to be shown on top of each other and I cannot find a way to do this.
I searched this forum and the help and looked at the available properties for the XY graph, but it seems impossible. So I was wondering if anyone here is able to help me solve this.
Thanks in advance,
Steph.
Attachments:
current.png 7 KB
wanted.png 10 KBThanks! Maybe I am not understanding the terminology and a "stack graph" may not be what I am looking for, but here is my small example.
DATE
DATA 1
DATA 2
1/2008
3
4
2/2008
4
8.5
3/2008
6.58
38.9
I would like to do a bar graph where DATA 1 AND DATA 2 overlap each other like Steph's example of a stack graph.
and the "DATE" will be on 'x-axis' while data 1 and data 2 will be values show on the y-axis. (Note: data 1 will always be data 2, it will show up with two colors where one color is always taller than the other).
Is this stack graph the right path? I am new at using the graphing icons in Labview, I do not even know how to I would go about loading these as inputs to the VI.
Please advise me on the right path. Thanks again!
Eileen
Maybe you are looking for
-
Help Locked out of iPod because we don't know password
My daughter accidentally entered her password incorrectly when she was creating it. (Not sure how she did it twice, but.....) So, now she doesn't know her password. She is locked out of the ipod and we've tried everything that Apple says to do. We
-
**i have a weird problem with my itunes witch just recently started. when i wake my macbook up and start itunes it will hang for about 45sec to a minute before opens. i can either wait or force quit and restart. ones i get it started it will open fin
-
How can I rename my document in Adobe Reader?
HHow can I rename my document in Adobe Reader? The app has changed a lot. HELP!
-
I'm trying to use FaceTime from my IMac OS Version 10.8.5 but when I try to log in, the system tries to verify and gives me a number to call Apple to complete registration. Is there anything I can do?
-
IPhone 6 dark top right corner - Apple store won't help.
It seems like the top corner of my new iPhone 6 is darker than the rest of the screen. I took it too the Apple store and compared mine with a few other store models and told me it doesn't seem like a defect. He recommended me to play a movie with lot