How is ATG-Data utilized with weblogic compared to Jboss?

Greetings,
I have expertise with ATG on Jboss and am new to WebLogic. So far so good but I have a few questions that I have not been able to answer on my own.
How does WebLogic handle ATG-Data? I have set the server start options within config.xml for each instance - the java options for module list, server name, atg data directory location and memory requirements as I normally do with the run.conf for jboss. However, nothing gets populated in the ATG-Data directory when starting up the servers. On set runassembler with standalone and liveconfig on as well. (understanding that i can use pack and standalone together with weblogic).
Any ideas what I could be missing?
Thanks!
-Kip

OK I got ATG-Data directory working as I was expecting. Seems CIM was my hindrance. I scrapped the managed servers that CIM created for me and recreated them from admin console and then redeployed the -standalone ears using nostage deployment plan.
With this I now get ATG-Data directory where I wanted it: /opt/Oracle/ATG-Data/servers/store-a/localconfig (last entry for config layer in the store-a.out log)
This ATG-Data directory is configured in the domains config.xml for server-start arguments under the managed server group.
-Xms1280m -Xmx1280m -Xmn256m -XX:PermSize=512m -Datg.dynamo.data-dir=/opt/Oracle/ATG-Data -Datg.dynamo.server.name=store-a
This is progress!
However, the module list shows all modules that were applied during runassembler for that atg server in the log - I am unable to override the module startup list with -Datg.dynamo.modules= within server start arguments.
The reason I want to override the list is because I prefer to use the same ATGProduction ear for lock manager and procedit servers without requirement them to load all the modules that were assembled in the ear.
I appreciate any tips or suggestions for best practices!
Thanks!
-Kip

Similar Messages

How to keep data integrity with the two business service in OSB 10.3.1.0

How to keep data integrity with the two business service in OSB 10.3.1.0
In our customer system, customer want to keep data integerity between two businness service. I thinks this is XA transaction issue.
Basing customer requirment, I created a testcase but I can't keep data integerity, For detail information, please refer the attached docs.

Can you please explain what you meant my data integrity in your use case?
Manoj

Urgent help: how to create data source for Weblogic RMI driver

Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

DataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

Urgent help: how to create data source for Weblogic T3 driver

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

How to configure IIS webserver with weblogic so that I can invoke servlets without the .wlforward extension

How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter and .wlforward
has also been
included as a special file type. However this requires me to key-in ".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

I am able to invoke the servlet without the wlforward extension now.
However, now I am required to add /weblogic before the servlet
name otherwise it does not execute the pathtrim property.
I have tried with the pathprepend thing also.
Can we get rid of the /weblogic part also. I just want to execute
my servlet as http://iis/myServlet.
Your help in this regard is greatly appreciated...
Thanks..
"Rishi" <[email protected]> wrote:
>
Thanks for the reply Kumar.
I did follow the instructions as given in the Weblogic documentation
The documentation said to add iisforward.dll as a filter service
and register .wlforward as a special
file type to be handled by iisproxy.dll. For this,
while configuring the IIS server in the Home Directory tab
I added an extension ".wlforward" and the executable as
iisproxy.dll. Is this the way it should have been done...
I also modified the iisproxy.ini file as per the documentation.
I have added the WLForwardPath property and set it to /weblogic.
My server works fine when I give the url as
http://iis/myServlet.wlforward
but it does not work for
http://iis/myServlet and this is the way i'd want it to work.
Please tell me if I am missing something on the configuration part
and if there is something special that needs to be done. I shall
be grateful to you.
Kumar Allamraju <[email protected]> wrote:
http://e-docs.bea.com/wls/docs61/adminguide/isapi.html#101184
Rishi wrote:
How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter
and
.wlforward
has also been
included as a special file type. However this requires me to key-in".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

How to debug web app with weblogic?

I wrote a web app that includes jsp files and some javabeans, then I put the jsp files to directory
mydomain\applications\DefaultWebApp
then I complied javabeans and put those classes to
mydomain\applications\DefaultWebApp\WEB-INF\classes
Then I start the weblogic,it runs very well.
I modified some javabean, complie them and put classes override the old classes,
but the web app can not find the new classes.
Any one know How to debug web app(with javabeans) in weblogic?
thanks!

how to config the hot deploy?
thxSorry, for this delay in responding. I had set notify me with email option in Watch This topic; but I never did get any email notification.
I use wls6.1; I think the process may be very similar to this in wls8.x. In wls6.1 (sp5), this is done via the -
Dweblogic.ProductionModeEnabled=False or
Dweblogic.ProductionModeEnabled=True
in the startup cmd/sh script. Out of the box, wls6.1 is set to Dweblogic.ProductionModeEnabled=False which automatically enables hot deploys.

Using weblogic.Admin utility with Weblogic 10.0

I am trying to write a script which perform PING server to ensure weblogic servers are up before moving on to start another server (the script starts all managed and admin servers), i used to be able to PING server on weblogic 8.1 using weblogic.Admin utility but on weblogic 10.3 i am getting the following exception:
java.lang.NoClassDefFoundError: weblogic/transaction/internal/TransactionHelperImpl
at weblogic.jndi.spi.EnvironmentManager$DefaultFactoryMaker.<clinit>(EnvironmentManager.java:26)
at weblogic.jndi.spi.EnvironmentManager.getInstance(EnvironmentManager.java:48)
at weblogic.jndi.Environment.getContext(Environment.java:307)
at weblogic.jndi.Environment.getContext(Environment.java:277)
at weblogic.jndi.Environment.createInitialContext(Environment.java:200)
at weblogic.jndi.Environment.getInitialContext(Environment.java:184)
at weblogic.jndi.Environment.getInitialContext(Environment.java:162)
at weblogic.management.commandline.tools.AdminToolHelper.getMBeanHome(AdminToolHelper.java:559)
at weblogic.management.commandline.tools.ServerInfoCommandLineInvoker.doCommandline(ServerInfoCommandLineInvoker.java:920)
at weblogic.management.commandline.tools.ServerInfoCommandLineInvoker.<init>(ServerInfoCommandLineInvoker.java:116)
at weblogic.management.commandline.AdminMain.main(AdminMain.java:132)
at weblogic.Admin.useAdminMain(Admin.java:43)
at weblogic.Admin.main(Admin.java:22)
java.lang.NoClassDefFoundError: weblogic/transaction/internal/TransactionHelperImpl
at weblogic.jndi.spi.EnvironmentManager$DefaultFactoryMaker.<clinit>(EnvironmentManager.java:26)
at weblogic.jndi.spi.EnvironmentManager.getInstance(EnvironmentManager.java:48)
at weblogic.jndi.Environment.getContext(Environment.java:307)
at weblogic.jndi.Environment.getContext(Environment.java:277)
at weblogic.jndi.Environment.createInitialContext(Environment.java:200)
at weblogic.jndi.Environment.getInitialContext(Environment.java:184)
at weblogic.jndi.Environment.getInitialContext(Environment.java:162)
at weblogic.management.commandline.tools.AdminToolHelper.getMBeanHome(AdminToolHelper.java:559)
at weblogic.management.commandline.tools.ServerInfoCommandLineInvoker.doCommandline(ServerInfoCommandLineInvoker.java:920)
at weblogic.management.commandline.tools.ServerInfoCommandLineInvoker.<init>(ServerInfoCommandLineInvoker.java:116)
at weblogic.management.commandline.AdminMain.main(AdminMain.java:132)
at weblogic.Admin.useAdminMain(Admin.java:43)
at weblogic.Admin.main(Admin.java:22)
The Classpath i am using:
/ascddata3/olcppads-dev01/weblogic10/server/lib/weblogic.jar:/ascddata3/olcppads-dev01/weblogic10/user_projects/autosc_pss/lib:/ascddata3/olcppads-dev01/weblogic10/server/lib/xmlx.jar:/ascddata3/olcppads-dev01/weblogic10/server/lib/wls-api.jar:/ascddata3/olcppads-dev01/weblogic10/server/lib/wlclient.jar:/ascddata3/olcppads-dev01/weblogic10/server/lib/wljmsclient.jar
The command i am using is:
java weblogic.Admin -url ins2d.med.ge.com:9010 -username USERNAME -password PASSWORD PING -verbose
In weblogic 8.1 the class weblogic/transaction/internal/TransactionHelperImpl used to be present in wljtaclient.jar but i can't locate the class anywhere in weblogic 10.3/server/lib. Kindly let me know how to use weblogic.Admin utility on weblogic 10.3

Hi,
First I ran the setDomainEnv.cmd script to set the environment and then executed the weblogic.Admin command and it worked for me.
D:\wls103\user_projects\domains\816532Local>java weblogic.Admin -adminurl t3://localhost:7010 -username weblogic -password weblogic PING
Sending 1 ping of 100 bytes.
RTT = ~16 milliseconds, or ~16 milliseconds/packet
D:\wls103\user_projects\domains\816532Local>
Regards.

How to run FVC utility for Weblogic server?

Hi all,
I want to use FVC(Form Version Controller) utility to update the database for some users.
I have provided the required parameters in the "fvc.properties".
When i run the utility from command prompt it is just printing the parameters given in the fvc properties file and the execution stops.
When i check the database nothing is updated.
I'm using BEA-Weblogic Version 8.1 as application server.
But in another environment where I'm using OC4J as application server I'm able to run the FVC utility and it is also updating the database.
Is there any other steps that we have to follow ,if we want to use this utility for Weblogic?
Thanks.

Hi,
The following is script found in fvcutil.cmd
@echo off
setlocal
if "%1" == "" goto usage
if "%2" == "" goto usage
call classpath
set CLASSPATH=%CLASSPATH%;.\lib\xlFvcUtil.jar;.\ext\jbossall-client.jar;.\ext\weblogic.jar;.\ext\oscache.jar;.\ext\javagroups-all.jar;.\ext\commons-logging.jar
D:\oracle_dev_design/xlclient/java\bin\java -DXL.FvcProps=fvc.properties -DXL.HomeDir=. -Djava.security.auth.login.config=.\config\authwl.conf com.thortech.xl.util.fvcutil.FVCUtil %1 %2
goto end
:usage
echo.
echo "USAGE : fvcutil.cmd <USERNAME> <PASSWORD>"
echo.
:end
endlocal
authwl is set properly. But when we run this command we get only parameters given in the fvc property file.
But when we run the same in another environment using (OC4J Application server) we are able to update the database using fvc.
Please guide us out on this regard to execute the same in weblogic server enabled environment.
Thanks

How to delete data-records with BI-planning in BEx?

Hi folks, masters and gurus,
we just upgraded some of our functions from BPS to BI-Planning.
Only one thing I could not resolve up to now:
In BPS (web based) it was easily possible to delete data-records by choosing a radio-button beside the data-entry-field and click the "delete"-button (a red "-") on the top.
When I tried to find a delete-function in RSPLAN now I only found one that deletes the data, but not the record itself.
Does anyone know how to build a function that I can use to delete data-records?
Thx in advance for your help,
Thomas

Oh yes ... it´s not necessary as it is easily possible to supress lines with only 0 in it with
query-properties / rows/coloumns / supressing Zero / activ ...
Edited by: Thomas Kejik on Jan 19, 2009 9:46 AM

How to Monitor ALBPM APPS with Weblogic Portals

Hi All,
I am new to BPM,
I have created a sample application with roles and participants ,My Requirement is i need to monitor the ALBPM Application through weblogic 9.2 Portals ,
Please let me know if any one is working on this kind of scenario
Thanks
LRK

Monitoring examples can be found here: http://middlewaremagic.com/weblogic/?p=7340
The WebLogic monitoring dashboard can be reached at: http://hostname:7001/console/dashboard.
For example, to view how the memory of the individual JVMs are doing you can start the JVM Runtime Heap view.
(Some examples can be found here: http://middlewaremagic.com/weblogic/?p=7716 - in the 'testing' section.)

How to create date variable with interval in VC

Hi Everyone,
I have 2 questions:
My scenario:
I am using a BI 7.0 Query which is having some variables. I want the same variables to be displayed in the VC output.
Question 1:
I know that how to bring these variables in variable screen, but when we use these queries, dont the variables in the variable screen automatically ask for the input?
I tried it but it is not happening automatically.
There are 2 inputs for queries with variables, i tried using both, but it is not working properly. Can any one tell me is it possible.
Question 2:
In this variable screen, I have to select date with interval format. but i dont know how to use variable with interval. ( Date with interval format).
I hope some one might have come across the same scenario .. If so please share with the solution me ..
Regards,
Chan

Ok .. Let me be very clear .. I think I confused you.
As you mentioned I have done every thing in query level.
I have created a query with a variable which is an interval based variable(date).
When I execute the query it asks for the dates to display the inbetween data.
I gave the inputs and the data is displayed properly.( So far what I have mentioned is all in Query designer).
In VC, I have used this query and it is having two ports named INPUT and VARIABLE. I know that I need to give input in variables. I selected the calander month variable from the list to display. After this I deployed the model. In the output screen the table is displayed and 1 text box is also available for the date input. I know that here I have to give date with same format as in Query designer output. I tried so many ways to give input by even selecting some other options like date picker but it is giving the following error - Variable expects interval values; enter an interval.
The date format which I m using in Query is "MM.YYYY" and I m using the same format in VC too.
Now I hope that u can understand better.
I want to know is there any other way through which this can enter interval value or what mistake I m doing in the above explained scenario?
Regards,
Chan

How to save data aquired with NI mydaq and save it in a data base using Labview?

i have developped with labview an interface that can control automatic irrigation station using two sensors ( humidity sesonr and temperature sensor) so i want to save data aquired during a year in a data base so i can compare these results in the next year please help me to do that in my interface labview and thanks
Attachments:
PFE.vi ‏223 KB

There is a database toolkit for LabVIEW. I don't think it is a free download however. With the Data Manipulation toolkit, you can integrate with most databases that use the ODBC protocol.
If you don;t need anything fancy, you can write the values out to file using the write/read spreadsheet VIs. If the file is [COMMA] or [TAB] delimited, you can import it into your database with ease.
Another approach is to format you output to a text file as SQL, and import the records that way.
INSERT INTO TEMP_HUM_TBL (Temperature, Humidity, Txn_Date)
VALUES (30, 95, 'Dec-24-2013');
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions

How to attach date time with dumpfile name taken with expdp in solaris

I have to write script for daily table backup which would run from crontab in solaris platform on daily basis. I am using expdp for the first time, the following command used to work with EXP
file=/anadbora13/Oracle_Backup/UIBS/dump/inter_UIBS_FM_`date +%d%m%y_%T`.dmp
But,
when I am using the following
dumpfile=inter_UIBS_FM_`date +%d%m%y_%T`.dmp
i am getting error :
ORA-39001: invalid argument value
ORA-39000: bad dump file specification
ORA-39124: dump file name "+%d%m%y_%T.dmp" contains an invalid substitution variable
Pls help....Thanks in advance

Hi,
You need to build the parfile commands first (using
server sysdate), and then pass the parfile to
Oracle:
touch /tmp/parfile.txt
Why bother with the 'touch'?
file=/anadbora13/Oracle_Backup/UIBS/dump/inter_UIBS_FM
_`date +%d%m%y_%T`.dmp >> /tmp/parfile.txt
Shouldn't that be 'echo file=.... > /tmp ....'
Why do you show the redirection to append into the temporary command file?
Now, execute the utility. . . .
expdp parfile=/tmp/parfile.txt
To see working details, try Jon Emmon's book "Oracle
Shell Scripting":
http://www.rampant-books.com/book_2007_1_shell_scripti
ng.htm
Hope this helps. . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference":
http://www.dba-oracle.com/bp/s_oracle_tuning_book.htm

How to start developing forms with weblogic server???

I am a beginner. I saw someone working on developer 6i and I love the ease so I come to oracle. BUT now I find this weblogic server for desktop applications (forms) too.
1. Please recommend me a book for developing desktop applications in weblogic server.
2. Is it possible to use Mysql as database while developing forms in weblogic server?
Many thanks

I am a beginner. I saw someone working on developer 6i and I love the ease so I come to oracle. BUT now I find this weblogic server for desktop applications (forms) too.You have to keep in mind that Oracle Developer Suite 6i (Forms/Reports) is over 10 years old and was primarily a Client/Server development environment. Yes, a Forms 6i application could be deployed to the web, but infrastruction has changed many times in the 10+ years since Forms 6i was introduced.
1. Please recommend me a book for developing desktop applications in weblogic server.Are you talking about an Oracle Forms application deployed through the WebLogic application server? If so, take a look at Developing Oracle Forms Applications or Oracle9i Developer: Developing Web Applications with Forms Builder. These are older books, but they will give you the basics of Oracle Forms development. Once you have the basics of Forms Development, then you can refer to the product documentation for specifics on the particular version of Forms you are using:
Oracle Forms 10g Online Book - Contents or <a href="http://download.oracle.com/docs/cd/E12839_01/index.htm>Oracle Fusion Middleware Documenation LIbrary</a> and select the Portal, Forms, Reports and Discoverer option.
{quote2. Is it possible to use Mysql as database while developing forms in weblogic server?{quote
You can use MySQL with your web app only if you are not using Oracle Forms! Oracle Forms will only communicate with an Oracle Database. There are methods available to access data from non-Oracle database, but they involved linking your Oracle Database to the non-Oracle database and accessing the data through the Oracle Database.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How to use data sets with smart objects?

Hi,
I have a psd of some mock-up boxes, and I want to apply different text to multiple versions. The solution here: http://helpx.adobe.com/photoshop/using/creating-data-driven-graphics.html is good, but doesn't seem to work with smart objects?
The file that I have has the box label as a smart object (which opens as a psb). How could I apply a data set to that, and have it pump out multiple jpegs?
If I apply the data set to the psb layers, then go back to the main image, I cannot export the whole complete picture anymore.
Thanks!

What database and connection type are you using? Are you connecting the report directly to the database, or trying to assign the datasource to object data?
It sounds like you might be trying to use a linked list, collection or other C# construct to pass your data in. This currently isn't supported by the Crystal Reports SDK. You can use a DataSet or a DataTable, and possibly also an IDataReader depending on which version of Crystal Reports you're referencing in your project. Of course you can also connect directly to the database, even if the database isn't on the same machine as the application.
The way to show master records with detail information is through the use of subreports and linked subreport parameters. Linked subreports take their parameter value from a record in the main report, so that only the data appropriate to that master record is displayed. The guys over in the [report design|SAP Crystal Reports; forum can help you out with this if you have questions on the specifics.

How is ATG-Data utilized with weblogic compared to Jboss?

Similar Messages

Maybe you are looking for