How is the rectangle box around my curser disengaged?

How is the rectangle box around my curser disengaged? I looked in Sys Prefs to no avail; otherwise, ML is so excellent in every way...
Thank you for your time, Lisa

Go to accesibility in sys prefes  then go to zoom and zoom style, change that to fullscreen.

Similar Messages

  • A way to temporarily hide the selection box around an object while nudging it.

    InDesign
    I would like to see a simple "Hide All" type command, similar to the "Hide Extras" feature in Photoshop - this would leave the page in a blank/ "preview" like view, but with selected objects still selected and therefore able to be moved around without seeing the Blue Selection Box.
    PROBLEM:
    I am looking for a way to temporarily hide the selection box around an object while nudging it.
    I want to visually nudge items around to find the ideal placement and I find the selection box distracting how it follows the object around as it is being nudged.
    (For anyone familiar with Photoshop, —I am looking for something that works exactly like "Hide" cmd+H  (VIEW > Extras) does in PS - where the selection goes away but the object is still adjustable.

    Thanks, but I don't see how that's helpful really.
    SHIFT+W goes into full on presentation mode already.
    Also, —this still doesn't solve the problem of being able to move an element around without a selection box getting in the way.
    I don't believe that a solution exists, I'm just checking with the community if one does.

  • Box around my curser, BT MM

    I have an annoying box around my curser. I have looked everywhere in the preferences and can't find a way to get rid of it. It even stays there when I am watching a DVD.

    Open the Universal Access pane of System Preferences and check whether all of the settings in the Seeing tab are correct.
    (19287)

  • I go to "clip adjustments" and change the length of a photo. It reverts back to original length. I also shorten it by moving the yellow "box" around a specific clip. It still reverts back to original length. Why?

    I go to "clip adjustments" and change the length of a clip. It reverts back to original length. I've also tried to shorten it by moving the yellow "box" around a specific clip to shorten. It still reverts back to original length. Why?

    Welcome to iMovie Discussions.
    See my 2nd reply to 'getzcreative', here.

  • I have Indesign CS6.  Question is about the rectangle box on the left side.

    The rectangle/box with the X through it, on the left in the second column, does not have the X through it anymore and now when I set up something to place in that section there is no X there either.  So I kept doing my thing as usual because it was still working, but when I printed it out the outline shows up where before the X was and there was no outline that showed up.  I do not know what I hit or did to change this.

    Screen shots, please.
    There are two, similar-looking, tools in the toolbox. The ones with the X are image frame tools and expect image content by default. These do not have stroke or fill applied when created, no matter what settings might be set as defaults.
    The ones without the X are the Shape tools, and by default they expect no content, but you can place anything into them if they are empty. They will have whatever stroke and fill are set by default when created.

  • Need to turn of the black boxes around signitures. How?

    I always get black boxes around signitures when printing to PDF. How can I fix that?

    How are you signing; with Adobe Reader?  Then you better ask in the Adobe Reader forum.

  • How can I make only the shape active for the mouse events, not the whole box around it?

    I want to create mouse over events for different parts of an image (say of a hard disk drive), so when the user places their mouse over the spindle, say, it will change colour.
    At the moment I have it working however the event is triggered when ever the mouse is in the bounding box of the spindle image. How can I get it to only be triggered when it is above the non transparent part of the image (or symbol)?

    Thanks joris182, but that wont work when there are other objects within the bounding box of the transparent symbol. For example, if I want the sclera to highlight, if I use an invisible shape over it, it will be active even if someone has their mouse over the vitreous body.

  • How to reference the rectangle box object in my code?

    I have to do some code migration from 16 bit Apps (Forms on
    Win3.1) to 32 bit apps(Forms on WinNT).For this migration i made
    a form for generation all the form in one shot . it's working
    fine. but it's giving me scroll bar in each form. we used
    rectangle box in most of the form and as u know i can not reffer
    rectangle box in programming.so i am not able to resize that. Is
    there any way so that i can refer that object programatically and
    can resize it.
    null

    shilpesh (guest) wrote:
    : I have to do some code migration from 16 bit Apps (Forms on
    : Win3.1) to 32 bit apps(Forms on WinNT).For this migration i
    made
    : a form for generation all the form in one shot . it's working
    : fine. but it's giving me scroll bar in each form. we used
    : rectangle box in most of the form and as u know i can not
    reffer
    : rectangle box in programming.so i am not able to resize that.
    Is
    : there any way so that i can refer that object programatically
    and
    : can resize it.
    Shilpesh,
    Please appreciate that this discussion forum is for Reports 6i
    Beta ONLY, as is also mentioned on the first page on the forum.
    Hence we will not be able to address this question .
    Regards
    The Oracle Reports Team
    null

  • Make the purple box around text and icon of a button go away?

    I have noticed that the first button of a group (or the last one pressed) displays a purple box around the text and/or the icon of a button. I don't want this. How do I get rid of it?

    Have you tried setting the colour that you want manually? Or perhaps setting the setOpaque() method with false?
    Not entirely sure what you mean...what look and feel are you using? Is it the Metal LAF or something else?

  • Lookup expression is not working when I am using with in the rectangle box in SSRS

    I have two datasets with common member is ProgramID.
    I have followed the below steps,
    1. Added one table  (2x2) and mapped this table to dataset1. After that I have removed top row.                                               
    That means I am maintaing only  data row.
    2. Added group to the table (ProgramID). Now the programid is sitting at cell#(1,1) and  cell#(1,2) is blank
    3. I have verified the report with preview and able to see the data for my all programs. I have 5 programs
    4. my plan is adding chart and matrix reports to cell# (1,2). If I am adding chart/matrix to the cell#(1,2) then we can't contol the  cell alignments in terms of height x width.
     To resolve that problem, I have added one rectangle control to the cell#(1,2) then I have added my chart and matrix report
    5. After completing the report, I have verified with preview and able to see the reports (chart/matrix) for all my 5 programs by page wise (note: I have provided page break before for my rectangle)
    6. Till this point, I have no issues
    7. Now, I have added one more row under the group. so, we have our main table (2x2). Becuase of programId group we can only see 3 cells in total table  (cell# (1,1) =ProgramId  cell#(1,2)=chart and matix reports under rectangle box; cell#(2,1)=already
    merged with ProgramID group; cell#(2,2)= planned to add one more rectanlge and add two reports (chart and matrix)
    8. Now, i have added rectangle to cell#(2,2) then added chart and matrix reports within the rectangle.
    9. cell#(2,2) reports are needs to extract the data from dataset-2. Here we have common member is ProgramID (ds-1,ds-2)
    10. First I have tested for matrix report by adding lookup expression
          Matrix report (2x2)
         row-1: Cell(1,1)= Gender report heading ; cell(1,2)=Month  (column group)
         Note: month is also common member in both the datasets. 
         row-2: cell(2,1)--  =Lookup(Programid.value, Programid.value,Gender.value,"Dataset2")  (Gender data is Male and Female)
                    Cell(2,2) -- empty for now
     11. I have tried to preview the report and able to see the report without any issues and below are observations
            main Table (2 x2)
             Cell# (1,1)  = ProgramID --Returning all 5 programs properly
             Cell# (1,2)  = Dataset1 related report (chart and matrix reports under rectangle) -- able to see without any issues
             Cell#(2,1)  = We already know this is merged cell. i.e menas ProgramID dispalying
              Cell#(2,2)= Only Male record is dispalying in the matrix report which is under rectanlge (here we have applied Lookup expression.
    Note: male is the first record from the database and Female is the second record
    Also, observed that Cell#(2,2) matrix report is unable to display the gender count information when I have provided count value expression in the cell(2,2) within the matrix and the expression I have uses is
      = sum(Lookup(ProgramId.value,ProgramId.value,GenderCOunt.value,"Dataset2"))
    Please ask me if I am unable to explain or lengthy explain.
    Point : Why the lookup expression is giving the first record only (in case of gender #(male, female) and why it is unable to give the gendercount.  Gendercount cell is totally blank.
    Please help me.
    Kishore.

    Hi Kishore,
    I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
    expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
    =lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
    As to the second issue, please try to use the following expression:
    =Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
    Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl  file with all the size properties to us by the following E-mail address?  It is benefit for us to do further analysis.
    E-mail: [email protected]
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How to refer rectangle box in my program?

    I have to do some code migration from 16 bit Apps (Forms on
    Win3.1) to 32 bit apps(Forms on WinNT).For this migration i made
    a form for generation all the form in one shot . it's working
    fine. but it's giving me scroll bar in each form. we used
    rectangle box in most of the form and as u know i can not reffer
    rectangle box in programming.so i am not able to resize that. Is
    there any way so that i can refer that object programatically and
    can resize it.
    null

    Hi,
    Sorry but i don' t understand what you've written, if
    my executable jar is named
    myexecutablejar.jar and the jar that i would
    like to put in in order to work is named
    jdic.jar what would be the command?
    Thanks for your precision.Is this clearer?
    jar cvf myexecutablejar your-classes path-of-jdic.jar

  • Why the big box around my "replied" text?

    I was replying to an email the other day and instead of just having my text appear as it usually does, this time I had a big box around it with an X in the upper left-hand corner, allowing me to delete it in its entirety. In addition to that, my reply wasn't in a different color text as I've set it up to be - it was in black.
    I'd never seen this before. Can you tell me what this was about?
    Thanks.
    Chip

    Yes, I saw this yesterday on my wife's macbook pro. I don't think she did anything out of the ordinary for it to appear - just typing in a reply to an email. My solution was to convert the message to plain text. But why did it appear in the first place?
    There have been other messages mentioning the "box with the X", but these have been black-filled boxes that occur when sending a document from another application to Mail, or Mailing an event from iCal etc. In my wife's case, and I think Chip's too, there was no attachment involved, just typing in text.
    Anyone?

  • The yellow box around the pages when using Word Processing

    I am somewhat new to the Mac, work with "Pages" to do newsletters. The first time I chose to use the Word Processing. Next I tried Pages layout.
    It was when clicked on "View thumbnails" in Word Processing newsletter that I noticed the yellow box all around the pages. If I tried to delete a page, they all went. Luckily there is an "undo delete" button. (o:
    I have since read the difference between layout and Word Processing from one of the posts. Is there any way to delete the yellow box?
    Compumom4

    There is one yellow box for each Section of the document. When you delete a Thumbnail, you delete the entire Section, however many pages are in that section. In Page Layout, each Page is a Section, so it may be deleted without affecting other pages.
    To delete one page out of a Section in a Word Processing document, the easiest way is to highlight all its content and hit the Delete key.
    Regards,
    Jerry

  • How do I keep boxes around the fields or insert lines so the information can be filled manually?

    I am adjusting a template for what I require, and I cannot figure out how to make a line so people can fill the form in manually. Any help out there?

    Hi Ian4,
    Looking at the web site again
    Other:
    * Unread message notification in the dock
    * Growl notifications for new messages and users changing status
    * Properly use ICQ accounts without sending text formatting in messages
    * Automatically set status to away when screensaver is activated
    * Option to auto-accept file transfers
    * Hide all iChat windows when iChat is inactive
    * Always on top option for user lists, text chats, and audio or video chats
    * Set a custom away auto-reply that is different from the away message
    * Change the delay of or disable auto-away
    * New message windows cascade properly instead of always appearing on top of each other
    * Built-in log viewer
    * Activity window shows history of user status changes
    * Warn before quitting while there are active chats
    * Option to disable pausing of AV chats while there are active file transfers
    * Disable picture-in-picture in video chats
    * Automatically reconnect when disconnected
    * Disable alert sounds when away, idle, or available
    Seems it should.
    Edit: Found how.
    Start the Video chat.
    Use the Always opn Top option.
    9:30 PM Thursday; April 5, 2007

  • Using photoshop elements 13 for a brochure Drew the rectangle shape for the first column but when i go to use the move tool it doesnt highlite the rectangle box why?

    Using photoshop elements 13 for creating a brochure -drew the rectanle shape for the first column but when i go to the move tool it doesnt allow me to highlite this shape why?

    The faulting module is photoshop. Report below.
    Source
    Adobe Photoshop CC 2014
    Summary
    Stopped working
    Date
    2/2/2015 4:54 PM
    Status
    Report sent
    Description
    Faulting Application Path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: Photoshop.exe
    Application Version: 15.2.2.310
    Application Timestamp: 5480338c
    Fault Module Name: Photoshop.exe
    Fault Module Version: 15.2.2.310
    Fault Module Timestamp: 5480338c
    Exception Code: c000001d
    Exception Offset: 00000000049de322
    OS Version: 6.3.9600.2.0.0.768.101
    Locale ID: 1033
    Additional Information 1: 8db4
    Additional Information 2: 8db473619c10c0c8b85ce99afe676ed8
    Additional Information 3: f06d
    Additional Information 4: f06da704bdd5338df2a8d09bde2244bb
    Extra information about the problem
    Bucket ID: 1fe6d1d4e5765bd348843b981b8ec4d2 (85990875000)

Maybe you are looking for

  • Is Flash Builder 4.7 being maintained anymore?

    I posted this question in the Adobe Air Development forum. (Is Flash Builder 4.7 being maintained anymore?) One user responded that he heard Chris Campbell of Adobe report that he believed that they will fix major bugs but we should not expect actual

  • MackBook Pro (13inch, Late 2011) Battery is not charging

    I went through all the suggested troubleshooting techniques for this particular issue but with no luck. I put it to sleep, restart, shutdown, Reset the SMC...nothing. I also tried the Diagnostic test and it turned out all good (hardware). Here is the

  • Reader will not open PDF'S

    When trying to open a downloaded PDF it now asks me if I want to open in protect mode then it will not open the PDF and asks if I want to open in protect mode? This never has happened before. I tried downloading Reader again but it does not correct t

  • Fill mkpf-bktxt field.

    Hi. I'm looking for user-exit or BAdi for TCode migo, witch can fill mkpf-bktxt before document save. Regards Bartek

  • Poor Font Rendering - Not very smooth!

    My fonts are rendering poorly in Indesign even when viewing at 100% viewed as High Quality Display. Am working on an iMac - Indesign CC. Trying to put a Resume together. Macs own program "Pages" actually seems to be rendering smoother fonts. Would ap


HashFlare