How long does it take for your iPad to restart? Mine takes 7.5 mins...

Hello, new to the forum. Hoping I can get some good advice here.
The first thing I thought I'd find out is if everyone else's iPads take as long to restart as mine. Mine shows the small silver Apple logo for 7 and a half minutes before I can use it. Is this normal?
Mine is the 64GB wifi + 3G model.
Looking forward to your replies!

Hiya, thanks for your reply. I did the reset all as you suggested and that took only 20 seconds or so. Took me a while to get all my apps back on the pages I had had them, but no problem... The kind of reset I am talking about is when you hold down both the exterior buttons until the little silver apple logo appears. That apple logo sits there for over 7 mins before I can use the iPad. Its the same with turning it off, when you swipe the thingy when prompted. My iPad has always done this, even since before the recent software update. I will try doing the reset through iTunes that you mention though. I like my iPad so much that I rarely even bother to turn on my main computer. I've got so many cool games and music making apps on the iPad, the computer rarely gets used now!

Similar Messages

  • HT4060 how long does it take to charge the battery for a mini Ipad from 1% to 100% ?

    how long does it take to charge a mini Ipad battery completely from 1% to 100%?

    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • How long does it take for your iCloud storage to incase once you have purchased additional space?

    Hi I have just purchased additional iCloud space, how long does it take before I can access this additional storage space?

    Wiki activity has not been showing up on the Activities tab of our Profiles for some time now. This is a known issue that they are working on. I don't know if our staticstics is being updated. You new article looks fine, so it must have published. Your
    profile still shows 16 articles. I will try to check if our statistics are being updated, but it could be the same issue we already know about (no Wiki activities in profiles).
    Richard Mueller - MVP Directory Services

  • How long does it take for a Macbook Pro to be shipped to your home?

    How long does it take for a Macbook Pro to be shipped to your home?

    Depends on the method of shipping. Normal FedEx takes 5-7 days. You would have to pay extra for 2-day or overnight.

  • HT4060 How long does it take to charge your ipad once the battery is all gone?

    How long does it take to charge your ipad 4th generation with retina display  once the battery is all gone?

    About 5 hours using the 12W charger that came with it.

  • How long does it take for apply to activate your iPhone number for imessage?

    I restored my iphone and now it won't let me iMessage anyone and it says it's waiting for activation.  How long does it take for apple to activate my phone number for imessage?

    Should happen almost immediately. Read here:
    http://support.apple.com/kb/ts4268

  • How long does it take for them to review your proof of purchase?

    I need a replacement for my iPod mini, and even though my Apple account information clearly states that it is still covered under the one-year warranty, they requested that I fax them a proof of purchase. I finally managed to get a credit card printout from Best Buy and I just faxed it to them earlier today, but my online repair status still says "pending review of proof of purchase." How long does it take for Apple to review the proof of purchase? Time is running out and my warranty expires on July 6th.

    Was this resolved for you? I have a similar issue.

  • HT1222 how long does it take for an ipad to restore?

    how long does it take an ipad to restore

    Welcome to the Apple Support Communities
    The restore of the iPad (erase the device and reinstall iOS) takes about 5 minutes or less, but the problem is that iTunes has to download iOS from the Internet, increasing the restoring time

  • Should your ipad be off when charging and how long does it take

    Should ipad be on or off when charging and how long does it take?

    scgirl195 wrote:
    Should ipad be on or off?
    You can turn it off and charge it or turn it on  and charge it. No need to turn it off actually.
    scgirl195 wrote:
    how long does it take?
    It depends on the charge level before start charging.

  • How long does it take to connect to Wi-Fi the first time I use my Ipad? It's been over 30 minutes. I see that it wants to connect but it keeps on turning.

    How long does it take to connect to Wi-Fi the first time I use my Ipad? It's been over 30 minutes. I see that it wants to connect but it keeps on turning.

    It should not take very long. Up to thirty seconds tops depending on your Wi-Fi network.
    Try rebooting your Wi-Fi router. Turn off the router for 30 seconds then turn it back on. After the router completes its startup routine and indicates a good connection to the internet start you iPad again and see if it will connect.
    If you still have problems you might try connecting to a different Wi-Fi network. Maybe one at your local coffee shop or library.

  • "How long does it take to do a dist-upgrade on your distro?"

    Yesterday there was a question in the USALUG.org "How long does it take to do a dist-upgrade on your distro?"
    This question was a good question, so I decide to make the ultimate test. I have a lot of computers standing here around, and remembered that on one of them was have already Archlinux installation. I was right, when I booted, the system check said me, that the system was 253 days not checked anymore. I got so excited that I forgot to check was it one of my 0.7.2 Gimmick or 0.8 Voodoo installations.
    The Computer
    Dell OptiPlex GX110
    [jada@arch-02 ~]$ cat /proc/cpuinfo
    processor : 0
    vendor_id : GenuineIntel
    cpu family : 6
    model : 8
    model name : Pentium III (Coppermine)
    stepping : 6
    cpu MHz : 797.452
    cache size : 256 KB
    fdiv_bug : no
    hlt_bug : no
    f00f_bug : no
    coma_bug : no
    fpu : yes
    fpu_exception : yes
    cpuid level : 2
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat p se36 mmx fxsr sse up
    bogomips : 1596.45
    clflush size : 32
    [jada@arch-02 ~]$
    I used the following command for the update
    $ time pacman -Syu
    The Test
    first update pacman
    [root@arch-02 jada]# pacman -Syu
    warning: current locale is invalid; using default "C" locale
    :: Synchronizing package databases...
    core 23.8K 80.0K/s 00:00:00 [#####################] 100%
    extra 310.5K 292.3K/s 00:00:01 [#####################] 100%
    community 341.0K 295.8K/s 00:00:01 [#####################] 100%
    :: Starting full system upgrade...
    :: Replace mktemp with core/coreutils? [Y/n] y
    :: Replace mpg321 with extra/mpg123? [Y/n] y
    warning: bind: forcing upgrade to version 9.4.2-1
    warning: cpufrequtils: forcing upgrade to version 002-3
    warning: dnsutils: forcing upgrade to version 9.4.2-1
    warning: flex: forcing upgrade to version 2.5.33-4
    warning: opera: forcing upgrade to version 9.25-2
    :: pacman has detected a newer version of the "pacman" package.
    :: It is recommended that you allow pacman to upgrade itself
    :: first, then you can re-run the operation with the newer version.
    :: Upgrade pacman first? [Y/n] y
    resolving dependencies... done.
    looking for inter-conflicts... done.
    Targets: libarchive-2.4.11-1 libdownload-1.3-1 pacman-3.1.1-1
    Total Package Size: 1.19 MB
    Proceed with installation? [Y/n] y
    :: Retrieving packages from core...
    libarchive 314.8K 253.4K/s 00:00:01 [#####################] 100%
    libdownload 49.4K 97.9K/s 00:00:01 [#####################] 100%
    pacman 855.2K 460.4K/s 00:00:02 [#####################] 100%
    checking package integrity... done.
    cleaning up... done.
    (3/3) checking for file conflicts [#####################] 100%
    (1/3) upgrading libarchive [#####################] 100%
    (2/3) upgrading libdownload [#####################] 100%
    (3/3) upgrading pacman [#####################] 100%
    >>> The makepkg.conf syntax has changed, please note the new format
    >>> when merging the pacnew file with your old configuration.
    >>>
    >>> The pacman.conf default file has changed. Please update your
    >>> config to use the single mirrorlist, and any additional files
    >>> in /etc/pacman.d/ (core, extra, etc.) can be deleted.
    >>>
    >>> The location of sync DBs has moved from /var/lib/pacman/ to
    >>> /var/lib/pacman/sync/ for several reasons. To delete older
    >>> DBs, please run pacman -Sc and follow the instructions.
    >>> You will also have to run pacman -Sy to refresh the sync DBs.
    >>>
    >>> abs is no longer included; please install the 'abs' package
    >>> to use abs. You may need to edit abs.conf to re-enable repos.
    [root@arch-02 jada]#
    restart pacman 3.1.1 and update the packages
    [root@arch-02 jada]# time pacman -Syu
    :: Synchronizing package databases...
    core 23.8K 80.3K/s 00:00:00 [#####################] 100%
    extra 310.5K 261.1K/s 00:00:01 [#####################] 100%
    community 341.0K 302.5K/s 00:00:01 [#####################] 100%
    :: Starting full system upgrade...
    :: Replace mktemp with core/coreutils? [Y/n] y
    :: Replace mpg321 with extra/mpg123? [Y/n] y
    warning: bind: forcing upgrade to version 9.4.2-1
    warning: cpufrequtils: forcing upgrade to version 002-3
    warning: dnsutils: forcing upgrade to version 9.4.2-1
    warning: flex: forcing upgrade to version 2.5.33-4
    warning: opera: forcing upgrade to version 9.25-2
    resolving dependencies...
    warning: dependency cycle detected:
    warning: bash will be installed before its glibc dependency
    warning: dependency cycle detected:
    warning: readline will be installed before its glibc dependency
    warning: dependency cycle detected:
    warning: ncurses will be installed before its glibc dependency
    warning: dependency cycle detected:
    warning: db will be installed before its coreutils dependency
    looking for inter-conflicts...
    Remove: mktemp mpg321
    Total Removed Size: 0.08 MB
    Targets: ncurses-5.6-6 readline-5.2-7 bash-3.2.033-2
    kernel-headers-2.6.23.1-2 tzdata-2007k-1 glibc-2.7-7 attr-2.4.39-2
    acl-2.2.45-2 cracklib-2.8.10-5 gcc-libs-4.2.3-3 db-4.6.21-2
    pam-0.99.9.0-2 shadow-4.0.18.2-2 coreutils-6.10-2 libtool-1.5.26-1
    mpg123-1.2.0-1 fontconfig-2.5.0-1 zlib-1.2.3-4 libpng-1.2.24-1
    cairo-1.4.14-1 libtasn1-1.3-1 lzo2-2.02-3 libgpg-error-1.6-1
    libgcrypt-1.4.0-1.1 opencdk-0.6.6-1 gnutls-2.0.4-1 libcups-1.3.5-1
    pcre-7.6-2 glib2-2.14.5-1 pango-1.18.4-1 gtk2-2.12.7-1
    binutils-2.18-5 gmp-4.2.2-2 mpfr-2.3.1-1 gcc-4.2.3-1
    glproto-1.4.9-1 libgl-7.0.3rc1-1 mesa-7.0.3rc1-1 acroread-8.1.2-1
    dialog-1.1_20071028-1 pciutils-2.2.8-3 alsa-utils-1.0.15-2
    e2fsprogs-1.40.4-1 apr-1.2.12-1 gdbm-1.8.3-5 apr-util-1.2.12-1
    openssl-0.9.8g-2 apache-2.2.8-1 jack-audio-connection-kit-0.109.0-1
    kde-common-3.5.8-3 libxmu-1.0.4-1 qt3-3.3.8-6.1 arts-1.5.8-2
    diffutils-2.8.1-5 gawk-3.1.6-2 m4-1.4.10-3 autoconf-2.61-3
    perl-5.8.8-9 automake-1.10.1-2 filesystem-2007.11-6 avahi-0.6.20-3
    bftpd-2.1-1 bin86-0.16.17-3 dnsutils-9.4.2-1 bind-9.4.2-1
    bison-2.3-4 bluez-libs-3.24-1 libusb-0.1.12-3 bluez-utils-3.24-2
    bridge-utils-1.2-2 bzip2-1.0.4-3 cairomm-1.4.6-1 cmake-2.4.8-1
    cpio-2.9-3 sysfsutils-2.1.0-4 cpufrequtils-002-3
    device-mapper-1.02.24-1 popt-1.10.6-3 cryptsetup-1.0.5-5
    csup-20060318-5 cups-1.3.5-1 curl-7.18.0-1 dbus-qt3-0.62-3
    dcron-3.2-3 dhcpcd-3.2.0-1 dmapi-2.2.8-3 libxml2-2.6.31-1
    docbook-xsl-1.73.2-1 dosfstools-2.11-2 dvd+rw-tools-7.0-4 ed-0.8-3
    enlightenment-0.16.8.11-1 gnome-desktop-2.20.3-1 eog-2.20.4-1
    libidl2-0.8.10-1 mozilla-common-1.1-2 xulrunner-1.8.1.11-1
    epiphany-2.20.3-1 eventlog-0.2.5-2 ghostscript-8.61-1
    gnome-keyring-2.20.3-1 libsasl-2.1.22-5 libldap-2.3.39-2
    smbclient-3.0.28A-1 gnome-vfs-2.20.1-1 libdjvu-3.5.20-1
    poppler-0.6.3-1 poppler-glib-0.6.3-1 evince-2.20.2-1 evms-2.5.5-5
    libsoup-2.2.104-1 evolution-data-server-1.12.3-1 exiv2-0.15-1
    faad2-2.6-1 grep-2.5.3-3 sed-4.1.5-3 fakeroot-1.9.2-1 fbset-2.1-2
    file-4.23-1 file-roller-2.20.3-1 findutils-4.2.32-1
    firefox-2.0.0.12-1 flashplugin-9.0.115.0-2 flex-2.5.33-4
    font-bitstream-speedo-1.0.0-4 font-misc-ethiopic-1.0.0-4
    font-misc-meltho-1.0.0-4 freeglut-2.4.0-3 freetype1-1.3.1-4
    glib-1.2.10-7 gtk-1.2.10-8 imlib-1.9.15-4 libstroke-0.5.1-2
    fvwm-2.4.20-2 gail-1.20.2-1 gc-7.0-2 gdb-6.7.1-1
    gtksourceview2-2.0.2-1 libgnomecups-0.2.3-1 libgnomeprint-2.18.3-1
    libgnomeprintui-2.18.2-1 python-2.5.1-5 pygobject-2.14.1-1
    pygtk-2.12.1-1 gedit-2.20.4-1 gen-init-cpio-2.6.17-3
    gettext-0.17-1 librsvg-2.20.0-1 gimp-2.4.4-1 gkrellm-2.3.1-2
    glibmm-2.14.2-1 gmime-2.2.16-1 gnokii-0.6.22-3
    gnome-menus-2.20.3-1 libwnck-2.20.3-1 gnome-panel-2.20.3-1
    gstreamer0.10-0.10.15-1 gstreamer0.10-base-0.10.15-1
    gstreamer0.10-alsa-0.10.15-1 gucharmap-1.10.2-1 libgtop-2.20.1-1
    gnome-applets-2.20.1-1 metacity-2.20.2-1 libbeagle-0.3.0-3
    nautilus-2.20.0-4 gnome-control-center-2.20.3-1
    gnome-python-2.20.1-1 gnome-python-desktop-2.20.0-3 guile-1.8.3-1
    gnome-games-2.20.3-1 gnome-power-manager-2.20.2-1
    tcp_wrappers-7.6-8 gnome-session-2.20.3-1 gtkmm-2.12.3-1
    gnome-system-monitor-2.20.2-1 vte-0.16.12-1 gnome-terminal-2.18.4-1
    gnome-utils-2.20.0.1-2 gnupg-1.4.8-1 libassuan-1.0.4-1
    gnupg2-2.0.8-1 gpgme-1.1.6-1 gpm-1.20.1-7 groff-1.19.2-4
    grub-0.97-9 gstreamer0.10-cdparanoia-0.10.15-1
    gstreamer0.10-gnomevfs-0.10.15-1 gstreamer0.10-ogg-0.10.15-1
    gstreamer0.10-vorbis-0.10.15-1 gtkhtml-3.16.3-1 gutenprint-5.0.2-1
    vi-7.1.228-1 vim-7.1.228-1 gvim-7.1.228-1 gzip-1.3.12-4
    hal-info-0.20071212-1 hdparm-7.7-3 usbutils-0.73-5 wget-1.11-1
    hwd-5.3.2-1 hwdetect-0.9-1 icewm-1.2.35-1 ifenslave-1.1.0-3
    imagemagick-6.3.8.0-1 intltool-0.37.0-1 iproute-070710-3
    iptables-1.3.8-2 iputils-20070202-4 isdn4k-utils-3.2p1-3
    jfsutils-1.1.12-2 jre-6u3-2 kbd-1.12.20070827-2 kdelibs-3.5.8-4
    lm_sensors-3.0.1-1 xorg-xauth-1.0.2-1 kdebase-3.5.8-3
    qscintilla-qt3-1.7.1-2 kdebindings-3.5.8-2 libgphoto2-2.4.0-4
    poppler-qt3-0.6.3-1 kdegraphics-3.5.8-3 sqlite3-3.5.6-1
    libopensync-0.34-1 kdepim-3.5.8-2 klibc-1.5-3 klibc-extras-2.3-1
    klibc-udev-116-2 klibc-module-init-tools-3.2.2-1
    mkinitcpio-0.5.17-2 module-init-tools-3.2.2-5 kernel26-2.6.24.1-2
    less-418-1 lftp-3.6.3-1 libao-0.8.8-2 orbit2-2.14.12-1
    libbonobo-2.20.3-1 libcdio-0.79-1 libelf-0.8.10-3 libevent-1.3d-2
    libgdiplus-1.2.6-1 libmikmod-3.1.12-1 libmysqlclient-5.0.51-2
    libpcap-0.9.8-2 libsamplerate-0.1.2-4 libtar-1.2.11-3
    libxfont-1.3.1-2 licenses-2.3-1 lilo-22.8-2 links-2.1pre33-1
    logrotate-3.7.5-1 lua-5.1.3-1 lvm2-2.02.33-1 mailx-8.1.1-5
    make-3.81-3 man-1.6f-2 man-pages-2.77-1 mdadm-2.6.4-1
    mono-1.2.6-1 mutt-1.5.17-4 mysql-clients-5.0.51-3 mysql-5.0.51-3
    nano-2.0.7-1 net-tools-1.60-13 netkit-ftp-0.17-4
    netkit-telnet-0.17-7 nfsidmap-0.20-2 portmap-6.0-2
    nfs-utils-1.1.0-3 ngrep-1.45-4 nmap-4.53-1 ntp-4.2.4p4-4
    openssh-4.7p1-6 openvpn-2.0.9-3 opera-9.25-2 orca-2.20.3-1
    patch-2.5.4-4 pcmciautils-014-3 php-5.2.5-3 pilot-link-0.12.3-1
    pine-4.64-4 pkgconfig-0.22-3 procps-3.2.7-4 libx86-0.99-1
    vbetool-1.0-2 pm-utils-0.99.4-1 qt-4.3.3-4 poppler-qt-0.6.3-1
    postgresql-libs-8.2.6-1 postgresql-8.2.6-1 ppp-2.4.4-6
    procinfo-19-2 psmisc-22.6-1 qca-2.0.0.svn744387-1.1 qca-qt3-1.0-1
    qca-tls-1.0-5 qscintilla-2.1-3 reiserfsprogs-3.6.20-3
    rp-pppoe-3.8-2 rsync-2.6.9-4 samba-3.0.28A-1 screen-4.0.3-5
    seahorse-2.20.3-1 shared-mime-info-0.23-1 sudo-1.6.9p12-1
    sysklogd-1.5-1 syslog-ng-2.0.6-1 util-linux-ng-2.13.0.1-2
    sysvinit-2.86-4 taglib-1.4.0.svn744384-1 tar-1.19-2 tcl-8.5.1-1
    tcpdump-3.9.8-1 tcsh-6.15.01-1 thunderbird-2.0.0.9-2 tk-8.5.1-1
    totem-plparser-2.21.91-1 totem-2.20.1-3 ttf-dejavu-2.23-1
    udev-116-3 unichrome-dri-7.0.3rc1-1 unzip-5.52-3
    vorbis-tools-1.1.1-7 which-2.19-2 whois-4.7.24-1
    wireless_tools-29-2 wireshark-0.99.7-1 wpa_supplicant-0.5.9-1
    xaw3d-1.5-4 xchat-2.8.4-2 xf86-input-evdev-1.2.0-1
    xf86-input-joystick-1.3.1-1 xf86-video-ati-6.7.197-2
    xf86-video-mga-1.9.100-2 xf86-video-nv-2.1.7-1
    xf86-video-s3virge-1.9.1-9 xf86-video-savage-2.1.3-2
    xf86-video-sis-0.9.4-2 xfsprogs-2.9.4-2 xfsdump-2.2.46-3
    wavpack-4.41.0-3 xine-lib-1.1.10-1 xinetd-2.3.14-3
    xkeyboard-config-1.1-1 xmms-1.2.11-1 xorg-server-1.4.0.90-6
    xorg-xinit-1.0.7-3 xscreensaver-5.04-2 yelp-2.20.0-3
    zenity-2.20.1-1
    Total Download Size: 743.90 MB
    Total Installed Size: 748.87 MB
    Proceed with installation? [Y/n]
    Proceed with installation? [Y/n] y
    :: Retrieving packages from core...
    ncurses-5.6-6-i686 1738.2K 518.0K/s 00:00:03 [#####################] 100%
    readline-5.2-7-i686 271.5K 228.3K/s 00:00:01 [#####################] 100%
    bash-3.2.033-2-i686 407.1K 299.1K/s 00:00:01 [#####################] 100%
    kernel-headers-2.6.2... 621.6K 376.8K/s 00:00:02 [#####################] 100%
    tzdata-2007k-1-i686 610.7K 329.0K/s 00:00:02 [#####################] 100%
    xorg-server-1.4.0.90... 7.4M 659.0K/s 00:00:11 [#####################] 100%
    xorg-xinit-1.0.7-3-i686 14.4K 56.9K/s 00:00:00 [#####################] 100%
    xscreensaver-5.04-2-... 8.0M 655.2K/s 00:00:13 [#####################] 100%
    yelp-2.20.0-3-i686 603.4K 356.7K/s 00:00:02 [#####################] 100%
    zenity-2.20.1-1-i686 1896.3K 546.6K/s 00:00:03 [#####################] 100%
    :: Retrieving packages from community...
    freetype1-1.3.1-4 119.9K 129.5K/s 00:00:01 [#####################] 100%
    gkrellm-2.3.1-2 724.3K 411.1K/s 00:00:02 [#####################] 100%
    xmms-1.2.11-1 1945.1K 557.0K/s 00:00:03 [#####################] 100%
    checking package integrity...
    (349/349) checking for file conflicts [#####################] 100%
    ( 1/349) upgrading ncurses [#####################] 100%
    ( 2/349) upgrading readline [#####################] 100%
    ( 3/349) upgrading bash [#####################] 100%
    ( 4/349) upgrading kernel-headers [#####################] 100%
    ( 5/349) upgrading tzdata [#####################] 100%
    ( 6/349) upgrading glibc [#####################] 100%
    (340/349) installing wavpack [#####################] 100%
    (341/349) upgrading xine-lib [#####################] 100%
    (342/349) upgrading xinetd [#####################] 100%
    (343/349) upgrading xkeyboard-config [#####################] 100%
    (344/349) upgrading xmms [#####################] 100%
    (345/349) upgrading xorg-server [#####################] 100%
    :: Could not detect nvidia-utils on system
    :: Will attempt to use built-in libwfb
    (346/349) upgrading xorg-xinit [#####################] 100%
    (347/349) upgrading xscreensaver [#####################] 100%
    (348/349) upgrading yelp [#####################] 100%
    (349/349) upgrading zenity [#####################] 100%
    real 56m46.062s
    user 4m25.013s
    sys 1m46.520s
    [root@arch-02 jada]#
    And for your tread question.
    How long does it take to do a dist-upgrade on your distro?
    one hour
    real    56m46.062s
    user    4m25.013s
    sys     1m46.520s
    After reboot the system loads all new applications with out any problem. Later I replaced the intel-video driver "xf86-video-i810 1.7.4-6" with the driver xf86-video-intel 2.2.0-2. No problems at all.
    Archlinux rocks

    JaDa wrote:Archlinux rocks
    definitely. By contrast, here's a regular upgrade on my debian box -- out of the blue it's having some problem with one of the packages, and it's turning into a regular recursive nightmare.
    root@moe:~ # apt-get upgrade
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    You might want to run 'apt-get -f install' to correct these.
    The following packages have unmet dependencies.
    E: Unmet dependencies. Try using -f.
    root@moe:~ # apt-get -f install
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    Correcting dependencies...Done
    The following extra packages will be installed:
    exim4-base exim4-daemon-light
    Suggested packages:
    exim4-doc-html exim4-doc-info eximon4 libmail-spf-query-perl
    The following packages will be upgraded:
    exim4-base exim4-daemon-light
    2 upgraded, 0 newly installed, 0 to remove and 64 not upgraded.
    1 not fully installed or removed.
    Need to get 0B/1391kB of archives.
    After unpacking 8192B of additional disk space will be used.
    Do you want to continue [Y/n]?
    Preconfiguring packages ...
    dpkg: exim4-daemon-light: dependency problems, but removing anyway as you request:
    exim4 depends on exim4-daemon-light | exim4-daemon-heavy | exim4-daemon-custom; however:
    Package exim4-daemon-light is to be removed.
    Package exim4-daemon-heavy is not installed.
    Package exim4-daemon-custom is not installed.
    dpkg: error processing exim4-daemon-light (--remove):
    Package is in a very bad inconsistent state - you should
    reinstall it before attempting a removal.
    Errors were encountered while processing:
    exim4-daemon-light
    [ Rootkit Hunter version 1.3.0 ]
    File updated: searched for 152 files, found 131
    E: Sub-process /usr/bin/dpkg returned an error code (1)
    root@moe:~ # apt-get install exim4-daemon-light
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    You might want to run 'apt-get -f install' to correct these:
    The following packages have unmet dependencies.
    exim4-daemon-light: Depends: exim4-base (>= 4.69) but 4.68-2 is to be installed
    E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
    root@moe:~ #
    It's so "delicate" and temperamental compared to the no-nonsense, straightforward approach of Arch. If one little thing is off, the entire system has a hissy-fit and won't do anything until you hunt the internet high and low searching for a solution, encountering all the debian hawks along the way who are ready to rip your head off at the first suggestion that debian isn't directly from god and could have a problem. Imo, Arch is the best linx distro hands down. Nothing else even comes close.

  • How long does it take for iCloud to sync to my devices?

    I just discovered that I could drag Word documents onto the iCloud web site from my computer. Pretty handy trick.  Drag and drop should be how this works.  So to test it I dragged a document from my My Documents Folder onto the iCloud web site in my browser (I wish my company would update to Windows 7 so it would be easier to align windows on screen).  It appeared to upload just fine.  So I went to my iPhone and opened Pages to see how badly the file translated from Word 2007 to Pages for iPhone.  And no document.
    I have waited about 20 minutes so far. Am I being to impatient?  Just how long does it take for iCloud to promulgate my documents to my iDevices?  I am hopefully getting an iPad for Xmas so I need to get this worked out before I actually need this for work.

    It actually goes pretty fast once you are on a WiFi connection.  I found an open WiFi connection at Starbucks and when i got back to my desk the files were all there on the web site.  I fond the Use Cellular connection to sync in settings and decided that I didn't need to sync my docs all the time so I will just wait to connect when I can get to a WiFi.
    Now I just need to figure out how to sync my contacts.  iCloud doesn't seem to play nice with Google contacts when they are on an Exchange connection.

  • How long does it take for the credit on the iphone 5 itunes to start declining after a purchase

    how long does it take for the credit on the iphone 5 itunes to start declining after a purchase? I used a $15 gift card, it was redeemed, and it showed up in my itunes account on my phone but after buying songs, the credit did not decline from 15, even after I restarted itunes on my phone.

    Nt sure on O2, but that seems to be a long time, you need to call your carrier and make sure they dont need to activate it. I believe they do.

  • How long does it takes for iTunes to restore software on a 5s?

    How long does it takes for iTunes to restore software in a iPhone?

    There are three major portions involved in a restore:
    1.  Downloading the latest copy of iOS to your Mac for installation on the iPhone.
    2.  Installing the software from your Mac onto the iPhone.
    3.  Restoring all the contents of your iPhone (except iOS, which was done in the above step).
    Step 1 will depend on your Mac's download speed.  We are talking about downloading more than 1GB.
    Step 2 should take about 10 minutes or less.
    Step 3 will depend on how much personal stuff (e.g., apps, photos, music) you had on your iPhone.  It might take minutes, or an hour or more.

  • How Long does it take for a NEW PODCAST to appear in iTunes?

    I was curious if maybe you know the answer to this question- How long does it take for a brand new podcast, once submitted to iTunes, to appear in the podcast section of iTunes? Does it really take 5 days? And, will I receive an email once it's on there? Thanks!
    -hdtvguru

    Hi,
    I found the answer to this question after doing two podcasts.
    It takes about week and half to be fully listed. When you first submit you receive an automated email. Emailed to the email address of your podcast feed. Then your podcast page is created for itune store and you receive another email that it's approved. You should receive this email sometimes two days after you received the first but it still won't be browse able until another few weeks(ie. listed in category). In the mean time don't remove your podcast feed file from your hosting account and don't make changes which will change the link to the feed you submitted.
    The only other part I couldn't figure out was why podcasts episodes don't come up when keywords from episode sections of podcast feed are typed in itune search box.
    -keep on keepin' on

  • How long does it take for the new ios to load?

    how long does it take for the new ios to load?

    you mean to install it or to run after instalation?
    downloading takes from a half hour, up to 2 hours if your connection is poor.
    installing takes about 5 minutes.
    and running it is like a minute.

Maybe you are looking for

  • Software Updater doesn't work, can't shut down my mac

    Hi, I am using the Mac OS 10.5 and have a problem with my Software Updater. If I open the "Software Updater" from the Apple-Menu nothing happens, if i press on the button "Software Updater" in the "About this Mac" window, again no reaction. If I open

  • Address book crashes whenever I try to open it.

    Whenever I try to open Address Book, I receive the messge, "Address Book quit unexpectedly."  Problem Details and System Configuration are then shown, with the option to click "OK" or "Reopen."  Most of the time, when I click "Reopen," I receive the

  • Urgent help needed in Checkbox in JTable

    I am trying to put a checkbox in the JTable. The value from the database is a string . The column name is checked. I want if hte value in the database is "yes" the column should be checked and if it is "no" it should not be checked or vice versa( if

  • "The GNOME keyring manager hijacked the GnuPG agent"

    I've run gpg from the command line and suddenly a dialog box appeared asking for my password: it even asked if I wanted to remember it. Meanwhile, in my bash terminal gpg had this to say: gpg: WARNING: The GNOME keyring manager hijacked the GnuPG age

  • CHANGING BACKGROUND COLORS ON MAIL VIEW WINDOW?

    The light blue area on the left of the mail view window seems to not have enough contrast to clearly read the number of emails sitting in a particular mailbox. Is there any way to customize the background color to make this more readable? Thanks, Bru