How make wireless connection with airport express to  Yamaha Clavinova CVP-403 ?

I would like to wirelessly connect my Yamaha Clavinova CVP-403. I would like to use a D-link DWA 125 and my airport express. Does anyone has any experience on how to do that?

Hi Henry - you seem to be a very helpful and knowledgeable person and I am wanting to dive in to the depths of wireless working at home and could probably do with your advice. I certainly don’t have as much knowledge as Jaybee and if he’s had problems I am feeling a little apprehensive.
I know that the first thing I need to do is get an ethernet modem to use with Airport Express as I currently only have a USB modem. I was wondering if you have any recommendations or if I should go straight for the Netgear DSL modem/router (DG834B) that Jaybee ended up with. Although the bit about ‘disabling the Airport Express resp. Extreme routers’ scares me rigid
I have looked at ‘About this Mac’ and got the following for you – hope it’s helpful.
OSX 10.3.9
1.33 HGz PowerPC G4 processor
Airport Extreme: Worldwide
Firmware: 400.17(3.90.34.0.p11)
Airport admin utility: 4.2 (v420.31)
My ISP is also Tiscali (UK) - they have said they can only provide modem support on the USB modem they provide so once I switch to an ethernet modem I’ll be on my own. I have checked the Tiscali website and found the following modems, so I would assume (probably unwisely) that they would be compatible with my account...
Zoom X6 5590 DSL Modem (55907200) 
D-Link DSL-300T 
Zoom Hayes ADSL Ethernet (H0-15805) (081580572) 
Any help is very gratefully received.
Regards,
... LIZ ...

Similar Messages

  • Can I create a home network withous dsl connection with airport express

    can I create a home network without dsl connection with airport express?
    So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid connection, which is directly connected to my Mac. Does that make an internal network possible?

    You have to set up the Air Port with an internet connection to set up a network. Do you have a modem? If yes you can set up the network. 

  • Extend wireless network with AirPort Express

    How to extend the wireless network with AirPort Express and Belkin PlayMax as the primary router ?

    How it work if I have an AirPor Station and 4 Airport Express, I actually also have an old TimeCapsule and an old AirPort Express. Can I cover all my house (around 300 m2). And will the old Airport slow down or convict with the new ones?

  • IMac losing wiffi connection with airport express when sleeping. I can't wake the iMac with the remote app on the iPhone. What is wrong?

    iMac losing wiffi connection with airport express when sleeping. I can't wake the iMac with the remote app on the iPhone. when i open airportconfiguration on the iphone is see that the imac isn't connected anymore. Normaly the airport express wake up the iMac but it doens't. What is wrong?

    anyone knows a reason for the item above?

  • My two iMacs frequently go offline when I have our iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices no problem. Any thoughts on this?

    My two iMacs frequently go offline when I have my iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices the offline problem stops. Any thoughts on this?

    .....doesn't that seems to suggest the modem?
    That is what I have suggested....twice now. From posts above:
    My opinion would be that it is likely not the ISP, unless you have complete loss of Internet service for all devices at the same time......it is the Comtrend device....
    and
    I believe that the problem lies with the modem, and not the ISP signal.
    Your ISP will likely have a different opinion, though. Please keep us posted on your progress.

  • Extend wireless range with Airport Express?

    Hi,
    I am using a Time Warner internet wifi router and need to extend the range in my home.  Can anyone help me with how to extend the range using an Airport Express?
    Thanks
    Chris

    Chris, are you planning to connect the AirPort Express to the Time Warner router using a wired Ethernet connection?
    The reason we ask is that Apple's "extend a wireless network" feature to provide more wireless coverage....using wireless only.....works only with other Apple routers as far as we know.
    It is almost certainly not compatible with devices from other manufacturers.

  • Trekstor pocketair wifi storage connecting with airport express

    Hey there!
    Is is possible connecting a Trekstor wifi Storage with airport express? I wanna use Itunes and this storage for streaming music with mit mac pro book (OS X 10.9.3)
    Or is it nessaray to use a apple wifi storage like airport extreme?
    Thanks!
    Best regards
    Michael

    Is is possible connecting a Trekstor wifi Storage with airport express?
    In theory, the Trekstor should be able to connect to an existing network either via a wired (Ethernet) or wireless (Wi-Fi) connection. The AirPort Express, depending on the model, can supply both.
    On the other hand, the Express DOES NOT support hard drives connected to its USB port; whereas, the Extreme and Time Capsule base stations do.

  • IPad and iPhone 4 and new 5s drop connection with airport express. This just started recently after working fine for a year. PC does not drop. Wifi signal fine. Help?

    Streaming music with airport express and Apple TV to 2 different systems. No problem with Apple TV. iPad and iPhone 4 and new 5s keep dropping their connection to airport express. Airport express connection to wifi appears to be fine. No dropping by windows PC. This just started recently after working fine for a year. Help?

    What does any of this have to do with the Apple TV?

  • Wireless printing with Airport Express not working

    I set up my Airport Express. I have an HP photojet printer and I can print from my Mac Air but the other 3 windows-based laptops that are connecting to Airport Express can't. Anyone know why that is or how to fix it?

    You did install and run Bonjour for Windows on each PC, correct?
    Does Bonjour "see" the printer...and it won't install....or.....does Bonjour not "see" the printer at all?
    Just in case.....
    Bonjour Print Services for Windows v2.0.2 - Support - Apple

  • Keep loseing my connection with airport express since Leopard

    Hi All.
    Before i upgraded to leopard from tiger i was connecting to the internet via my airport express with no bother at all. In fact my two laptops connect with airport still with no probs. But like i say now ive upgraded as i cant connect alot of the time. I know absoultely nothing about computers. Please someone please help.
    Many thanks

    Hi Nodyland,
    Try this:
    Power Cycle your Airport Express. Just unplug the Airport Express from the power source wait 2 minutes and plug it back in.
    This might be helpful
    Airport Software
    You might have to reset your Airport Express
    Airport Reset
    hope this was helpful

  • Ipad connects with Airport Express, but not wireless router

    I have a airport express that exends my network and is connected by an ethernet cable to the wireless router.  they are on opposite sides of the house from each other.  every other device i own has full bars wifi anywhere in the house.  but the ipad only seems to find the signal from the AE. 
    If i go in the bedroom with the wireless router, the signal drops to 1 bar.  if i unplug the AE along with all the other electronics for the TV/Receiver at night, the ipad loses the signal and cannot get a signal from the router, standing right next to it.  i have tried reset, hard reset, renew lease forgetting network, and all fails.  any ideas?
    I have a Verizon Ultraline series 3 model A90-9100EM15-10 and the firmware is up to date.

    Disclaimer - For me the Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture very different from that found in most 1st world nations, such as that in the two dominant North American countries. Written language has no tone. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    You likely have your reason for extending your network in this manner, but it seems that the AE is not really extending your router's network, but creating its own separate network that then extends your internet connection. This can be confusing to devices if you are expecting that they will switch between the two of them automatically.
    The iPad can only support one connect at a time. It sounds like you want it to be able to jump from the AE connection to a router connection on a whim when signal strength drops. I am not sure that the iPad's radio is that sophisticated. At best when the iPad looses a signal it could ask if you want to join any other network that it detects, especially if it has connected to that network in the past.
    AFA the router, some routers don't like iOS devices and just won't connect. When you go to Settings/Wi-Fi does the iPad see the router's network? If the iPad sees the router network, try configuring a connection by hand.
    Tap Other... and write the name of the router's network. Tap Security and select the type of security the router's network employs. Return to the previous pane and enter the password. Tap Join. If you can make the conection the iPad should remember this network in the future. Turn on Ask to Join Networks and hopefully when the iPad looses the AE signal in the future it will then ask you if you want to join the router's network.

  • How do I connect the airport express base station to the DSL modem? Can it be done wirelessly?

    Can the airport express base station be wirelessly connected to the DCL modem?

    Alan1111 wrote:
    Can the airport express base station be wirelessly connected to the DCL modem?
    Alan,
         Please provide more information.  (Make/model of the modem and airport express, Mac OS version, etc.)
    Most likely your modem is the source of your internet connect and you sound like you are trying to extend your network through the airport express (which is a router).
    I don't know what a "DCL modem" is.   Perhaps you meant "DSL".
    Most internet modems are either a "Cable Modem" or a "DSL Modem".
    Time Warner (TMC) and Comcast typically provide cable modems, which use a coaxial (round) cable.
    "DSL Modems" are used with AT&T and they are connected to your telephone wires.
    Both of these types of modems usually includes a router built-in, some include a wireless router, too.
    Either way, I don't know of any way to connect an Airport base station to a router wirelessly.
    That would be called a "bridge" in networking terms and while it may be possible, it is not common.
    Most routers use a direct ethernet cable connection, because the data flows much faster than wirelessly.
    Normally, one connects to their airport base station with an ethernet cable from the primary home/office computer.
    It can be accessed wirelessly, but only if you enable that option in the Airport utility (not the default).
    Again, connecting or bridging one router to another router is not a common method.

  • How do I connect to Airport express with my iMac?

    I am trying to connect my iMac to my Airport Express.

    Sorry, the AirPort Extreme and Time Capsule would be in the same boat as far as their USB ports. However, if a multifunction printer is network-ready, meaning that it can connect to an existing network by Ethernet or by wireless, then it could connect to the AirPorts by one of those means and have all of its functionality.
    For example, I have an HP Officejet 6500. This multifunction printer has both Ethernet and wireless capability. I have it connected by wireless to one of my AirPort Extreme Base Stations and I am able to both scan and fax with it from my Macs or PCs in this configuration.

  • How to setup wireless printing with AirPort Express?

    Hey, I just bought a AirPort Express today and I can't figure out how to setup the usb wireless printing. Could someone explain in detail on how to do this? Thanks-Michael
    I have a Windows 7 64-bit PC and a Hp Deskjet F380 USB printer.

    Download the install Bonjour Print Services for Windows v2.0.2
    Run the program. Hopefully, your printer will be recognized.
    If it is, "install" the printer and try to print.
    Keep in mind that if you have an All-in-One type of device, that only the print function will be supported.
    Advanced features like copy, scan, maintenance, etc are not supported. You will need to connect the All-in-One directly to your PC if you need those services.

  • How to extend wireless range with airport express

    I am using 10.6.8....I have a wireless connection and would like to use an airport express to extend my range....the unit model is A1084. I can't find out how to do this in assistant. Does anyone know?

    An Airport can extend only another Airport WiFi.  It can not extend non-Apple WiFi systems.
    I don't know the model numbers and I don't know when the extend capability was added.

Maybe you are looking for

  • Can I use two different itune accounts on one computer?

    Can I use two different itune accounts on one computer?

  • How do I make my Airport Extreme Base Station stop asking to update?

    For awhile my Airport base station has been periodically asking to update its firmware.  But since everything is working fine and I've seen reports of windows computers having trouble connecting after stepping up to that version I'd rather leave it b

  • Offsetting entry and account determination

    Hi friends, The question I'm putting across might sound silly. I have tried a lot to understand these on my own but I still don't feel confident on my own understanding. Hence I'm seeking your help. Can you please explain me the meaning of Offsetting

  • Selection based on list

    i have a master detail form , on the header i want to add pop list for each of the fields in detail block ,  In the detail block i have three fields emp_code,emp_name,job_title, i want to add pop list on each of these three fields based on the select

  • Help menu in finder not working

    I select Mac Help in the help menu in finder and it tries to open and fails. Does anyone else see this problem? Any fixes?