How many chapter markers can iDVD handle ?

If I'm going to name each in order to be able to jump to that chapter will I run out of room or will iDVD continue adding "Next" buttons to handle them all ?
Thanks

... okayyyy.....
I understood the Q as "is there any tech-limit?" sorry, me alien, me no english...
you can modify any iDVD theme, choose from many button templates, select fonts and place buttons around the screen... this is no automatic process, your imagination sets the limits... if you buttons just a pixel "large" and nameds as "a", I'm pretty sure, you can place dozends of buttons on one screen...
useful? good looking? good interface?... that's your decision... the templates mainly offer 6 - 8 buttons per page... for good reasons....
you have read this one?
http://www.apple.com/ilife/tutorials

Similar Messages

How many concurrent connections can ACS handle at once?

Hi Experts,
Could you please let me know how many concurrent connections ACS can handle at once?
Is there any limitation on it?
Our ACS version is 4.0 (1) build 27.
Thanks in advance for your help and have a nice day!
Regards,
Gabor

It depends on many other factors but as far as I know ACS can handle upto 40 Auth request per second*
*Condition Apply
Regards,
~JG
Do rate helpful posts

Is there a limit to how many chapter markers Final Cut X exports?

I've videoing mutlple Dance recitals and I created chapter markers for each dance in one recital.
I share them ad dvd plus audio and the chapter markers imported fine into DVD Studio Pro......
Then next recital and at least 10 more markers and I've tried several ways of sharing them. I've sent them to compressor and they show up there, but when the files are saved and imported into DVD studio, there are no chapter markers...
At this writing I'm sending it to a straight movie to see if chapter markers are there.
If there's a limit. I don't like that.

For any who this happens too----
I went and deleted all the CHAPTER MARKERS that originally were brought in as markers on the event.
I put them back in manually and the exported OK.
The only thing different I noticed was that one MARKER had an "&" in the title. I switched it to AND, so I'm just guessing with no eperical testing (since my work goes on) that the "&" may have been the problem.

T430u: How many external displays can it handle?

I want to get a new computer, that can power three displays at once. Preferably three external monitors, maybe even four.
I was thinking of getting either an ultrabook, T430u or X1 Carbon. Or a think branded desktop.
Any guidance would be appreciated. Thanks
Solved!
Go to Solution.

ThinkPad T430u can handle one internal, one through hdmi, and one through miniDP. So in 3 in total (natively). If you need additional LCD support, maybe consider an ThinkPad USB 3.0 dock, which allows you to add another 2 screens support per dock (for a total of 2 docks or 4 additional screens).
X1 can can handle one miniDP external screen, not sure whether Displayport 1.2 passthrough works on them or not.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

How many wireless devices can WRT54G handle at the same time?

In my house I have WRT54G router and WRE54G range expander that work great with 2 Compaq desktop PCs connected via wireless USB cards, one noname, wired, PC and an Acer laptop that uses both wired and wireless access (one or the other, I use laptop at home sometimes).
The problem starts when I connect another laptop (Gateway). Immediately one or both of the wireless desktops is dropped and as long as the Gateway is connected, I can get the other two working by reseting the router and then only for a couple of minutes at the time.
It looks like I can only use 2 wireless and two wired connections at the same time, which I think is odd.
I've checked the router setup and tried experimenting with the allowed number of addresses that can be used, but that did not solve the problem.
I've installed the latest software updates and that did not work either.
I am using a secured access (WPA).
What else can I try and what am I missing?
Thanks!

Thanks for a quick response!
Under "Network adapters", here's what I found:
- Broadcom 802.11g Network Adapter
- 1394 Net Adapter
- Marvell Yukon 88E8036 PCI-E Fast Ethernet Controler
Two other wireless USB adapters are the same:
- BLANC Mini Wireless USB adapter

HOW TO ADD CHAPTER MARKERS FOR IDVD

how do you add chapter markers for iDVD import?

FCP does not have that capability. You can add chapter markers in Compressor, but that would be another recompression step, and you can dd them in GarageBand. Perhaps it might be best to add them in iDVD. Can you add them in iDVD?
It would be an excellent feature request to have them in FCP, though I'm not sure how they would implement it.

Possible To Add Chapter Markers To iDVD Slide Shows?

Is it possible to add chapter markers to iDVD slideshows, or is that only possible in movies?
I have a slideshow prepared with over 300 photos, and would really like to be able to create chapter markers [starting points] so a viewer doesn't have to click through so many photos to find a particular photo. This probably cannot be done, but I didn't want to proceed with my project, IF it is a possibility, and I am just missing some quick way to do this.

The only way to create chapters in a slideshow is to create the slideshow as a movie in iPhoto or iMovie. This way you can create Chapter markers that will show up in menus.
Each slide in an iDVD created slideshow is actually a different Chapter - that's why some set-top DVD players drop the audio on slide changes and why each slideshow can only have 99 slides.

How many internal HDs can I add to my G4 AGP tower?

Hi all,
How many internal HDs can I add into my G4 tower? I want to buy and use a SATA controller PCI card to break the 137 mb barrier and add 3 or more hds for my graphics art files, video and music files. Sort like a server right?
Thanks
web dude

Hi, Web dude -
What do you mean by this? They have power packs plugged to them and they're plugged in a strip?
Yes.
The firewire bus is designed to be able to provide power for use by an attached device, in addition to providing a data pathway. There is a limit as to how much power can be provided by that bus. Such power is used by the device to operate its mechanics - in the case of a firewire hard drive, to run the motor that spins the platter(s) in the drive.
Many, if not most, firewire devices can also be powered by using a separate power supply, often an external transformer although some may have that transformer built in. This necessitates a separate connection to line power, typically to an outlet on a power strip or surge suppressor strip.
When I ordered each of my firewire drives, I also ordered the optional power supply for it. This makes each drive non-dependent on the Mac for operating power.
How should I prevent over heating my G4?
As far as keeping a Mac from overheating, the primary defense is to keep it clean inside. Dust is both an insulator and a restrictor of airflow. Using canned air regularly to blow dust out of the inside of the Mac, and to clean its fans, goes a long way to keeping it from overheating. Using a vacuum cleaner is not recommended - it's too easy for the nozzle to bang into something, and the airflow going into a plastic nozzle can create static electricity, which you do not want around any printed circuit board.
Keep the machine itself adequately ventilated - it needs a reasonably unrestricted supply of fresh air. If you place the tower on the floor or under a desk, make sure there are several inches of free space between the case and any obstructions. Usually, keeping it on a desktop reduces the amout of dust it will ingest.
In addition, whenever possible use external power for a device - this applies to firewire and USB devices.
Hard drives generate a fair amount of heat. G4 desktop models are designed to accommodate up to four internal hard drives, though it is possible to install more than that. If you go beyond four internal drives in a G4, consider replacing the fans with ones with a larger capacity to handle the increased heat load.
If you replace the CPU, be sure you follow the instructions with the new one re making sure the heat sink on the new processor is installed correctly.

How many Voice connections can cisco 2821 support?

Good day.
I have a cisco 2821 with EVM slot, NME-X slot and two HWIC slots. I have 4 port FXOs on the two HWIC slots. The EM-HDA-8FXS module on the EVM slot can handle 8 FXS connections. Please i would like to know if there is an EVM module that can do FXO connections and also how many voice connections can this router handle in total. Can the EM-HDA-8FXS module handle both FXS and FXO connections?
Hope someone can help me out. My deadline has already passed.
Regards,
Obinna.

Hi, already replied to this in the appropriate forum.
Please do not open duplicate threads.

HT3291 how many apple tv can access shared computer

How many Apple tv Can Access one shared computer

Depends on your network connection. If you are going to do more than one you DEFINETLY need to use a wired, not wireless, connection. You can do a couple easily this way. There are some people that have posed on here that use 10 or more but that is pretty extreme and your computer would need a pretty heavy IO bus to handle that.

Exporting QT with Chapter markers for iDVD

When I export a QT with Chapter markers for iDVD I get one movie file then a number of "AV" files - what are these and what do I do with them?
workflow as follows:
1.Place chapter markers in timeline using mm the Add Chapter Markers
2. set in/out points in timeline
3. export quicktime movie
4. select include Chapter Markers and include audio/video
5. do NOT select recompress all frames
6. DO select make self contained movie.
7. Open exported movie file in Quicktime and chapter markers are present
8. import ONLY the movie file to iDVD (NOT the AV files?) and answer yes to read all chapter markers
9. burn seems to work fine but when I playback on DVD player there is digital stuttering in the picture
Any ideas on how to remedy the problem?
thanks in advance
patrick

The project is only 75 minutes. Do think it is the codec that iDVD is using that is causing the stutter. I assumed that it always encodes using MPG2.
Any idea what the AV files are?
When I export as an uncompressed DV stream the file is 15 GB.
When I export as uncompressed QT I get one file (movie) at 2.5 GB then
5 more "AV" files that are each 2.5 as well. So when I import the movie file without the AV files am I missing something?
Should I look into DVD Studio Pro? I have version 1.5 but I am fairly unfamiliar with it.

How many mails i can send at a time per day using APEX mail system?

HI,
I am working on application, when i have written a process to send mail, i have a project where i have to send mail at a time for all the email id's
given list there are upto 5000 email id's where text body also include certain set of data from a report. thinking at a time 3000 its difficult i divided
it region wise, but still each region have 2000 odd email id's. during testing when i run the process just 950 mails i could send then i got a error
saying "ORA-20001: You have exceeded the maximum number of email messages per workspace. Please contact your administrator." so please
can any one help me to know How many mails i can send at a time per day using APEX mail system?
Thanks in advance
Gowthami

Hi jfosteroracle,
You are getting the error may be the following reason,
Check the following,
Login as ADMIN and Goto -->Manage Instance-->Instance Settings--> Mail-->Maximum Emails per workspace
Actually this number denotes the Number of mails can be sent per 24 hour for the workspace,It may exceeded.
It may be the reason.
Thank you.
Regards,
Gurujothi
Edited by: Gurujothi on Jun 27, 2012 5:54 AM

How many key fields can we have in a DSO?

Hi,
how many key fields can we have in a DSO.is it 16 or any number of key fields can be used? If only 16 are allowed pls let me know how to add more key fileds (my requirement is 21 keyfields) .
Thanks in advance,
Praveen

Hi,
Thanks for the reply. Pls let me know the procedure to include 5 more key fields because i have 21 keyfields which i have to use.
Thanks&Regards
Praveen

How many key fields can we maintained in dso or ods

HI
pls let me know how many key fields can we maintained in DSO or ODS.
Thanks and Regards.
ASIM.

Hi,
Key fields can only be 16 you cannot exceed this. but if you have more key fields, you can combine fields using a routine for a key field
Max Data Fields - 749 data fields can be added in a DSO.
Regards,
Marasa.

How many lines we can print using Non-alv report list ?

Hi Experts,
How many lines we can print using Non-alv report list ?
regards
vishnu

Hi,
It depends on the page size according to the page size we can set the no. of lines as follows,
REPORT program_name NO STANDARD PAGE HEADING
LINE-SIZE 290
LINE-COUNT 65.
Hope it helps you,
Regards,
Abhijit G. Borkar

How many chapter markers can iDVD handle ?

Similar Messages

Maybe you are looking for