How many concurrent VPN client sessions available for cisco 2621XM?

I have cisco router 2621XM with IOS c2600-advipservicesk9-mz.124-11.T4.
I want to know, how many concurrent VPN client sessions can be available in this image.

  here is the configuration on PIX,
group-policy DfltGrpPolicy attributes
wins-server value 10.0.0.67 10.0.0.68
dns-server value 10.0.0.67 10.0.0.68
vpn-simultaneous-logins 20
vpn-idle-timeout 5
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpn-acl
default-domain value mydomain.com
address-pools value vpnpool group-policy DfltGrpPolicy attributes
wins-server value 10.0.0.67 10.0.0.68
dns-server value 10.0.0.67 10.0.0.68
vpn-simultaneous-logins 20
vpn-idle-timeout 5
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpn-acl
default-domain value want-want.com
address-pools value vpnpool

Similar Messages

  • How many iPhones will there be available for pre-order online Feb. 3?

    I was wanting to see if i'll have any chance at all of pre-ordering an iPhone, even if I try and get one online the minute you can order one?
    Thanks

    I don't remember the website crashing when the Druid X was launched so I don't think there will be a problem with the iPhone unless a bunch of **bleep** from AT&T are on there trying to order on the 3rd when they can't until the 10th. From my research it looks like the Druid X was more hyped up and in more of a demand than the iPhone, Most say I will wait for the iPhone 5 or that there happy with Android and not a Apple fan boy I hope this is true so there will be more iPhones for the rest of us!

  • How many concurrency request can handel in wcf

    hi
    i have a question :
    wcf support how many concurrency request a time ?
    for example i have a wcf service and a lot of (10000) client that call the wcf together 
    thanks

    I think all your clients will be able to use your WCF Service regardless of Concurrency.
    I believe that concurrency is related to the threading of the individual request. Not completely sure about that part though. But, all your clients should be able to access the service regardless of the concurrency. That would be more based on the stress on
    your server.
    Developing is part of being a developer.

  • How many concurrent admin sessions are supported on CiscoWorks LMS 3.2?

    How many concurrent admin sessions are supported on CiscoWorks LMS 3.2?

    We recommend having no more than 20 simultaneous users logged into LMS (for performance reasons).  All of these users can be administrators.  That said, there is no hard limit.

  • How many concurrent users are allowed for an Azure Virtual Machine?

    How many concurrent users are allowed for an Azure Virtual Machine?
    Please share the details with the Azure VM size. Currently I have Standard VM of size D13(4 cores, 28GB RAM)

    Hi SanPSK,
    Thanks for posting here.
    I suggest you to check this article for Azure VM size
    https://msdn.microsoft.com/en-us/library/azure/dn197896.aspx
    For the concurrent users on VM - A maximum of 2 concurrent connections are supported, unless the server is configured as a Remote Desktop Services session host.
    Girish Prajwal

  • How to make VPN client auto timeout when it still idle?

    How to make VPN client auto disconnect when it still idle?
    Hi,I found some user still connected the VPN evenif they dose not use the VPN resouse.
    I try to set a "idle timeout" for the VPN configuration.
    We use PIX515 8.0.3 and CISCO ACS 4.2 for the VPN's connection and authentication,and the user use cisco vpn client for the connection.
    I have tried many methods,but all failured.
    First,I configed "vpn-idel-timeout 5" on PIX.It can not worked.
    so,I add Radius(CISCO VPN 3000/ASA/PIX 7.0+) attribute "[026/3076/050] Authenticated-User-Idle-Timeout" on CISCO ACS,It still not worked.
    And I also add IETF RADIUS Attributes "[028] Idle-Timeout" on group setting on ACS,it always not worked.
    i found in vpn client's statistics,it always has some byte sended or received, i thought it maybe IPsec keepalive message or Radius message.
    This maybe the reason because the PIX or ACS think the vpn user is keep working.
    Can someone tell me how to make a "idle time out"?
    best regard.
    Roger

      here is the configuration on PIX,
    group-policy DfltGrpPolicy attributes
    wins-server value 10.0.0.67 10.0.0.68
    dns-server value 10.0.0.67 10.0.0.68
    vpn-simultaneous-logins 20
    vpn-idle-timeout 5
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value vpn-acl
    default-domain value mydomain.com
    address-pools value vpnpool group-policy DfltGrpPolicy attributes
    wins-server value 10.0.0.67 10.0.0.68
    dns-server value 10.0.0.67 10.0.0.68
    vpn-simultaneous-logins 20
    vpn-idle-timeout 5
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value vpn-acl
    default-domain value want-want.com
    address-pools value vpnpool

  • How many Concurrent Requests handled in XI?

    Hi,
    Can anybody let me know how many concurrent requests can be handled in XI and where to check this number for a syncronous scenario ?
    Thanks
    Sreenivas

    Hi sreenivas,
    it depends mainly on the number of work process available in your system and on the tuning of java vm.
    Have a look at <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad">SAP Exchange Infrastructure Tuning Guide XI 3.0</a>
    Hope it helps,
    best regards,
    Sergio

  • How to find out how many concurrent users using web application?

    Hi all,
    I have a web application deployed using 9iAS. I am trying to find out how to find out how many concurrent users are using this application at any one time. According to Oracle there is no way to see this information using the enterprise manager interface.
    Does anybody out there know how I can find out this information in real time? Failing that, are there any good analysis tools out there that display usage to the minute (all the tools I have found show usage by hour which is not sufficent for my needs).
    Any help would be much appreciated,
    Caroline

    I know I haven't heard of any software to do this, but this also sounds like a really hard problem to try and really analyze well.
    The trick is, you might "infer" how long a user is using an application based on when cookies are set and when they're set to expire. If that's a long time, though, that could count far more "concurrent" users than are actually there. A user could simply close the application at any time and stop using the application; you can't really detect that because the server isn't "told" when the user closes their browser or goes somewhere else.
    A good perl script might be able to read the Apache access log and tell you how many unique IPs asked for a given directory in which various applications are stored in any 5 minute span of time... that could be something like an indicator of "concurrent" users.
    If you don't know Perl, I'd suggest getting the O'Reilly & Associates book on Perl and learning it, because the more I think about this, the more this sounds like a textbook example for applying a Perl script.

  • How many server licenses do I need for SharePoint 2013?

    I am new to the concept of CAL. I am reading about it. I found this linkhttp://sharepoint.stackexchange.com/questions/101914/how-many-server-licenses-do-i-need-for-sharepoint-2013
    Suppose there are 2 users in the sharepoint farm. As per above link we requires 7/8 server license. So my question is do we requires 7/8 licences per user basis (2*7/8) or we requires 7/8 licences once only then we require 2 more licenses for 2 users (7/8 +2)?

    The second option.
    If you have 7 SharePoint servers then you need 7 SharePoint Server Licenses.
    If you have two people in your company who can use SharePoint then you need two Client Access Licenses (7 server, 2 CAL).
    If you had two hundred thousand users who could then you would need two hundred thousand CALs, but the number of server licenses would not change. (7 server, 200,000 CALs).

  • Recommended spec can take how many concurrent users

    With the following recommended spec from Adobe website, how many concurrent users ?
    Flash Media Streaming Server system requirements
    OS : Windows Server 2003 SP2 or Windows 2008
    H/W Requirements
    -          3.2GHz Intel Pentium 4 Processor (dual Intel Xeon or faster recommended)
    -          2GB RAM ( 4GB recommended)
    -          1Gb Ethernet card

    Hi,
    The number of concurrent users really depends on your setup.
    You might want to read the blogpost from the FMS PM on this at: http://blogs.adobe.com/ktowes/2008/08/breaking_1gbps_on_flash_media.html
    "I’ve received a lot of requests lately about how much media can be delivered through Flash Media Server (FMS). As you may or may not know, FMS is held to the same limitations as most other streaming or HTTP servers, that is the available bandwidth, disk speed, memory and CPU power on a single server. When we introduced Flash Media Server 3 we increased the performance significantly to allow you to take full advantage of hardware and ultimately help to reduce the total cost of ownership. ........... read on"
    Greetz,
    Klaasjan

  • How many concurrent connections can ACS handle at once?

    Hi Experts,
    Could you please let me know how many concurrent connections ACS can handle at once?
    Is there any limitation on it?
    Our ACS version is 4.0 (1) build 27.
    Thanks in advance for your help and have a nice day!
    Regards,
    Gabor

    It depends on many other factors but as far as I know ACS can handle upto 40 Auth request per second*
    *Condition Apply
    Regards,
    ~JG
    Do rate helpful posts

  • How many concurrent users on a FMS?

    We want to stream live Town Hall meetings with the majority
    of the users viewing it from our inTRAnet. 320x240, 30fps, Dual 2.8
    GHz, 4 GB widows server. Anybody with similiar setup using FIMS to
    service 200 or 500 concurrent users? We have two campuses and I
    need to know if I will need to spec a second server if we get above
    a certain number. How many concurrent users can I supprot with the
    above configuration? Thanks

    FMS should be able to handle your 500 clients with no problem
    using the configuration you mentioned (some of my apps routinely
    see many times more than that on a similar server). I use a
    slightly beefier processor in my boxes though... quad core
    Kentsfield Xeon / 4GB ram.
    That said, also make sure you have enough throughput at your
    NIC to handle the traffic. At 500 concurrent clients, a low
    bandwidth stream of 300kbps puts you at about 150Mbps, so you'll
    want to run the numbers before you commit to a single serves in
    case you can't get enough network juice to a single box.

  • How to design socket client-server app for 2-way communication

    Hi, I am writing a client-server application. I have a single server and many clients. Each client will need the ability to send information to the server at any time. The server will also need the ability to send information to a client at any time. Its this second part that I am not sure how to design. Would I need to create a SocketServer on each client to accept incoming messages, or is there a better way? Thanks

    scranchdaddy wrote:
    Don't my requirements sound a lot like an IM application, where a chat server might need to send a message to a chat client at any time?Not really. If that is what you are designing
    in my opinion one could easily be forgiven for thinking you were deliberately obfuscating your goal...
    How does the server know where the client is? Does it know the IP address of the client?I would imagine the server would contain a directory of IPs? I'm not sure.
    What happens if the client is not running?Then I guess the message would not get delivered.
    What happens if the client is behind a firewall that does not allow incoming connections?How do IM chat clients work? How have people solved this in the past?Typically the server would only care about clients currently connected to the server.
    Maybe you should re-think your design. I don't really have a design, just requirements, that's why I'm writing this post.Your subject says "+How to *design* socket client-server app for 2-way communication+".
    Are you saying you expect someone else to do the design for you?

  • How many concurrent connections that an ACS server version 4.2 latest patch can handle?

    I have about 50 routers and layer-3 switches that autheticate via tacacs+.  The AAA server used to be on a Linux machine running open-source tacacs+ built by me.  I have a perl script that will log into all 50 devices at the same time to collect statistics.  This script is multi-threaded.  Everything is working fine so far.
    I recently out-sourced the AAA function to a 3rd party company, not by my choice.  The 3rd party uses Cisco ACS version 4.2 with the latest patch running on Windows 2003 Enterprise Server with 16GB RAM and quad processors with quad-cores, IBM x3650-M2 hardware. The connectivity between the 3rd party and my company is through a DS-3 connection.  Maximum bandwidth over this DS-3 connection is less than 10Mbps at most.
    I noticed that for the past 3 months I have multiple failures with this perl script due to authentication failure with the ACS server.  If I just run the script again a few routers/switches, there are no issues; however, whenever I started the script to log into 50 devices all at the same time, it will fail.  If I made the configuration on all routers/switches to point back to the old open-source tacacs+ server, the issue goes away.  The minute I switched back to the
    new ACS server, the issue came back.  If I modified the script to hit one device at a time, it works fine.  I think it is the ACS server can not handle a lot
    of AAA requests at the same time.
    Does anyone know how many concurrent connections that an ACS 4.2, with latest patches on Windows 2003 Enterprise Server with lot of memory and CPU power, can handle?  I can't seem to find this anywhere on Cisco website.
    Thanks in advance.

    No, Im not saying ACS cannot cope.
    Concurrency and latency are very different things. ACS CSTacacs can handle many 100s of simple authentications/authorisations per second with users in the internal database. If 1000s of devices all send traffic in the same instant it would take some seconds to work through the backlog of traffic.
    Also, worth considering that a limited number of tasks within ACS (or threads) can actually handle a much greater number of "logins" because they are generally multi-message allowing ACS to keep lots of plates spinning.
    If users are in an external databases the latency (per authentication) can increase depending on where the users are (eg Windows AD) and if bad enough can have a serious effect on the overall authentication rate. At which point customers normally turn to load balancing.
    If your device timeouts are 20 seconds (totally reasonable) I suggest the issue is more likely to be something else... a bug, perhaps specific to v4.2?

  • How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart

    How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart. We need connect by  Adobe Encoder many people. what is differences between Adobe Media Server 5 Professional, Adobe Media Server 5 Standard and Adobe Media Server 5 Extended?

    For the detailed list of differences across editions refer this link
    http://www.adobe.com/in/products/adobe-media-server-family/buying-guide-comparison.html

Maybe you are looking for