How many IP's can Airport Express support in bridge mode?

I have an Airport Extreme (5th Generation) and I have an A/V system upstairs. I have 4 devices that need a 10/100 base T ethernet connection. If I setup my Airport Express in bridge mode and go into a 5 port gigabit switch, will it be able to manage more than 1 IP?

The AirPort Express can handle up to 10 simultaneous connections. Since the Express will be in Bridge Mode, the IP addressing will be handled by the "upstream" router....your AirPort Extreme.

Similar Messages

How many Voice connections can cisco 2821 support?

Good day.
I have a cisco 2821 with EVM slot, NME-X slot and two HWIC slots. I have 4 port FXOs on the two HWIC slots. The EM-HDA-8FXS module on the EVM slot can handle 8 FXS connections. Please i would like to know if there is an EVM module that can do FXO connections and also how many voice connections can this router handle in total. Can the EM-HDA-8FXS module handle both FXS and FXO connections?
Hope someone can help me out. My deadline has already passed.
Regards,
Obinna.

Hi, already replied to this in the appropriate forum.
Please do not open duplicate threads.

How many time take the airport express in the configuration ?

My airport express don't complete the configuration

Hi wsantanasuarez,
Welcome to the Support Communities!
The article below may be able to help you with this. You may need to reset your Airport Express:
Resetting an AirPort base station FAQ
https://support.apple.com/kb/HT3728
Cheers,
- Judy

How many HDD space can a Macbook support. (E.G. 1TB?)

I am gg to upgrade my HDD myself but i do not know can my macbook support if i install a 1TB hdd. Can anyone help?

It depends on which MacBook you have. The unibody MacBooks (Aluminum or late '09+ White) can handle a 1TB drive. If it's the White or Black pre-late '09 (non-unibody), then the largest right now is 750GB.

Airport Express disappears in bridge mode

I'm using my Airport Express as a Router. I'm living in a student dorm and want to have access to other computers in the dorm network, so I set up the router in bridge mode so it does not create its own network. Point is, now I can't access the airport anymore via the airport utility, as if it doesn't exist. I can't access it via IP and if I try via name, it loads the settings forever and eventually aborts. This is not a huge problem since everything works and I tend not to change a running system, but my WiFi-analysis-app recommends switching the channels and I would want to try if that improves the network - which I can't, since I can't access the airport.
Any ideas? I do not want to reset the airport to factory settings since that would probably change the IPs within my network, which means I would need to submit every single machine in it to the student dorm internet people again (every single IP needs to be approved by them before it can access the internet).
Oh, and I can't access the airport when connecting via LAN either.

The reason it does not work is the Express is on an IP that is different to the main IP of the computer..
Or indeed in bridge it is on exactly the same IP as the main system and is also therefore lost.
When you applied for IP addresses did you apply for one for the Express??
Are you allowed to use a router? Most dorm systems ban them due to the issues involved.
Oh, and I can't access the airport when connecting via LAN either.
When you changed the airport from dhcp and nat to bridge, the Express should have got an IP from the main router.. along with all the other clients..
If all your computers/devices are on the dorm network.. when you changed to bridge I am a bit lost how that happened.. as you should have had to re-register all the computers/devices.
Lets work from default.
When lost the system will go to default.. the IP of the Express by default is 10.0.1.1 (but in bridge without a register on the system I have no idea what it will go to).
Please set one computer to IP of 10.0.1.10 with standard subnet 255.255.255.0 (you do not need to fill in gateway or dns).
Try and access the Express now.. no luck.. unplug the ethernet from the Express WAN port.. reboot the Express.. now try again.
When there is no chance of getting an IP It should revert to default.
No luck sorry there is next to no way around but hard reset.
However tell me what IP you get on the computer now.. without changing anything and with the system working and internet running.
A screenshot could help..

Question about Airport Express in WDS bridge mode with wired clients

I am looking to buy an Airport Extreme N router, and then use the Express I already have to extend my network using WDS. I intend to setup the Express as a bridge in WDS mode and then connect a wired client to the Express. The question is can I connect a multi port switch or hub to the Express so that multiple wired clients can use the bridge or does Express only support one wired client. I looked at the FAQ at http://docs.info.apple.com/article.html?artnum=108038 but it doesn't address that.
Thanks

Hmmm, I haven't actually tried that myself, but it should work since, as a Remote Base Station in a WDS, the Ethernet port on the AX acts like a LAN port.

AirPort Express in a bridge mode

I'm connected to ISP with ADSL router which has it's own NAT and DHCP. I had an idea to create WiFi network with AirPort Express (N), but AX's LAN connection never works.
I found a very strange steps that solve the problem:
1. I set AX in a NAT mode. In this mode an option appears that allows to set Ethernet WAN-port speed = 10Mbit/full-duplex. The rest settings are meaningless. Then i save the configuration. After restart the AX is blinking amber with "Dual NAT" error (it's true!)
2. Then I set AX in a bridge mode and save. After restart it lights green and works ok with internet functioning and DHCP from ADSL router working for WiFi clients as well.
But if i power off AX - then after powering on and booting the light is finally changing this way: 1 sec green, 1 sec amber, 1 sec off. And so on. The indicator on the ADSL router is turning on and off synchronously. Repeating steps 1 and 2 does the repair. I've tested it many times.
I have found no other ways to set AX in a bridge mode. The speed 10FD is critical - no other speeds work. Other devices are connected at auto mode and show the speed 100MBit/full duplex. The ADSL modem is ZXDSL 531B (it has internal WiFi, which i do not switch on)

It's not the right behavior. I suspect that your DSL router is a little buggy, because why else are you turning off its radio for a different one? But you could also try exchanging the Apple unit. It makes no sense that the Apple unit only runs in 10 Mbit mode. Have you looked online for firmware updates for both your DSL modem and your AX? That would be the best place to start. Oh, and try a different Ethernet port and a different Ethernet cable.
Good luck!

How many operating systems can a MacBook support?

I wanted to know if a MacBook can support more than 2 operating systems as I wished to have a Windows OS for some applications in addition to OSX and Linux in which I have to primarily work.

Welcome to the Apple Support Communities
You can install as many operating systems as you want, but if you install Windows, you can't install another operating system because Boot Camp needs two volumes on the hard drive.
I recommend you to install Linux in a virtual machine instead of on a partition if you want to use Windows

Can airport express support WDS thru a linksys wag200g wireless router

just got the above router and have to extend the range of my network so it can reach my mac mini. am trying to use a/ex as a remote but not having any luck. i know alot of routers do not support WDS but was told this one did. can anyone help? am just about ready to throw it through a window!

Hi again kenkarno,
So the whole idea of WDS (Wireless Distribution System) is to enable you to use multiple devices (i.e. Wireless Routers) on the same network.
For example if you set up a wireless network called "kenkarno" but your original router wasn't powerful to cover the desired area, you could add further routers to the same "kenkarno" network as opposed to creating a multitude of networks for each router. The obvious advantage is that if you're out of range of one router you're in range of another without having to switch networks.
At the moment WDS is very proprietary (hence my first post) so it is common when trying to set up a WDS composed of different brand routers, you may not get them to talk to one another due to incompatibilities in their software.
In your case, it could be that your Actiontec router will not be able to form part of a WDS with your AE so your suggestion of using ethernet between the Actiontec and the AE could be the way to go here (although you'd have two separate networks). If you went for a second AE you could create a WDS between this and your existing one which may make life a little easier.
Hope it works out

How many PXI Chassis can be connected (Daisy Chain)on MIXI Express.

How many PXI Chassis can be connected (Daisy Chain)on MIXI Express?
Regards
Prabhakant Patil

Hi Prabhakant
Based on the MXI-Express datasheet and the MXI-4 Series User Manual "The PCI specification makes provisions for up to 255 bus segments to simultaneously exist in a PCI hierarchy and MXI-4 hardware provides everything needed to support those provisions."
I'll get back to you after speaking to a specialist.
Kind Regards
Chris | Applications Engineer NIUK

How many wireless devices can connect to an Express which is wired and extending an Extreme network?

How many wireless devices can connect to an Express which is wired and extending an Extreme network?

That is great news I have A1392s. One more question...
If I have an Airport Extreme setup as a router and feeding internet from a modem/ I wire an express (A1392) and "create a wireless network" the airport utility puts the express into bridge mode automatically.
How many wireless clients can I connect simultaneously to the express?
How many wireless clients can I connect simultaneously to the extreme assuming I am using all 50 at the express?
In other words, Could I have 50 wireless clients connected to each device simultaneously giving me a total of 100 wireless clients?
Thans

How many wireless devices can be connected at once to an airport extreme?

How many wireless devices can be connected to an airport extreem at one time? I have 4 iphones and 2 ipads, a goolge chrome and 4 wired devices.

Any AirPort Extreme produced since 2008 will support up to 50 wireless devices and 150+ wired devices simultaneously, so this should accommodate most users in most homes.

How many 7920 phones can be supported on one Cisco 1131AG access point?

hi all,
who knows that how many 7920 phones can be supported on one 1131ag AP? Thanks a lot...

Hi Alomar,
Hopefully this info will help;
Number of 802.11b Phones per AP
Before any discussion about network planning can take place, it helps to understand the basics of the overall network capacity.
The following network capacity guidelines apply to sizing the Wireless IP Telephony network:
No more than 7 concurrent G.711 calls per AP.
No more than 8 concurrent G.729 calls per AP.
Note These design recommendations assume that Voice Activity Detection (VAD) has been disabled on the Cisco 7920 Wireless IP Phones. Use of VAD on the Cisco 7920 phones can conserve bandwidth, but Cisco recommends that you disable VAD on all Cisco CallManager servers to provide better overall voice quality.
In addition to determining how much bandwidth is needed for an 802.11b VoIP call, you must also consider overall radio contention for a particular RF channel. The general rule is that you should not deploy any more than 20 to 25 802.11b endpoints per AP. The more endpoints you add to an AP, the more you reduce the amount of overall bandwidth and potentially increase transmission delays.
The maximum number of phones per AP depends on the calling patterns of individual users (based on Erlang ratios). Cisco recommends no more than 7 concurrent calls using G.711 or 8 concurrent calls using G.729. Beyond that number of calls, when excessive background data is present, the voice quality of all calls becomes unacceptable.
From this doc;
http://www.cisco.com/en/US/products/hw/phones/ps379/products_implementation_design_guide_chapter09186a00802a0a05.html
Hope this helps!
Rob
Please remember to rate helpful posts.....

How to set up an Airport Express on Windows 8 on laptop with no CD drive?

I recently purchased an Asus Ultrabook which has no CD drive. I have Airport Express set up on my old laptop, this was set up via an installation CD.
How do I move the Airport Express to my new laptop and install the software without the CD? I can't seem to find a software download for it.
I'm sure this is a basic question for those in the know, but I'm stumped!
Thanks :-)

Welcome to Apple Support Communities
If your PC hasn't got a disc drive, download AirPort Utility from the Apple website to set up the AirPort Express > http://support.apple.com/kb/DL1547?viewlocale=es_ES

How do I reconfigure my Airport Express in client mode?

My home uses an AT&T U-Verse wireless network to connect to the Internet. I also have an Airport Express hooked to a USB HP Printer to create wireless access to the printer. With a change in U-Verse service, AT&T replaced my network interface with a new box, connected that box to new port at the sub-station, a new wireless network name and a new wireless network password. Now everything works except my "wireless" printer. I suspect that the issue is that the Airport Express has the wrong network name and password, but cannot figure out how to change it. My Airport Utility is version 6.3.1 and it does not find my Airport Express. My Airport Express is an older one and I can find no model number on it anywhere. How do I reconfigure my Airport Express.
Previously when trying to install an Airport Extreme on my system, I proved with several long conversation with Apple support that it would not work with the U-Verse system. I had to take the Airport Extreme back and use two USB hard drives for Tim capsule backups, one for each computer.

AirPort Utility 6.3.1 will work with the AirPort Express A1264, so something else is amiss.
Power up the AirPort Express for a few minutes, then hold in the reset button on the Express for 10-12 seconds and release. Allow a full minute for the Express to restart.
Open AirPort Utility
Click on Other WiFi Devices
Click AirPort Express
That should allow you to reconfigure the Express

How many IP's can Airport Express support in bridge mode?

Similar Messages

Maybe you are looking for