How many logic boards needed ?!!

Yes. How many logic boards does a Powerbook G4 17" (1Ghz) need to work properly? Do they really have to be changed every year?
I bought this beautiful machine secondhand. About 6 months later the screen seems to fail (stays black) i can us it only in Target mode as hard disk. The consulted Repair centre concludes: new logic board! Then they discover it already had been changed 26/07/2004 ; merely a year ago. But no more garanty. It isn't fair that such a expensive part and repair is only garanteed foor 3 months. Cost of this reparation: more than 700 euros !!!!! Apple customer care: "sorry, we can't do anything to help you" Who can then?
Time to switch I suppose? What else can I do ??

Sorry to hear that - not sure if you have any recourse based on the fact that it has already been replaced. If you have an up to date AppleCare contract then I would think it should be covered. In general I would say that your problem is somewhat rare. If main board failures every 6 months were common across the entire product line - or even just a subset such as the 17" - then there woudl have been a class action lawsuit resulting in a settlment that woudl provide extended warranty coverage.

Similar Messages

How many logical systems are required to connect between one XI and R3 sytm

Hi Experts,
I need to know how many Logical systems we need to create when connecting an SAP XI and SAP R3 system.
details wht I configured is as follows :
For XI : LOGSYSXI assigned to 100 client
For R3: LOGSYSR3 assigned to 800 client.
Do I need to create two log'cal systems on one side?
How many logical systems can a Client can support simultaneously? is it only one or more that one?
THANKS IN ADVANCE.
Sunil K Shetty

Hi,
>>>>I need to know how many Logical systems we need to create when connecting an SAP XI and SAP R3 system.
as you've noticed you only need 2 - one for r3 one for XI
this is enough
also shown in my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
>>>>How many logical systems can a Client can support simultaneously?
one per client
but you can create as much as you wish
wihtout connecting them to a client
but use one for XI
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Apple says "logic board needs replaced" because MBP won't turn on w/o SMC reset but I think I can fix it; can you help?

Hello,
Less than a year after purchasing a brand new, early-2011 Macbook Pro (still covered under Extended Apple Care) and, sadly, only a week or two after finally upgrading to 8GB RAM, I returned to my notebook after taking a shower and watched it suddenly shut itself down. It has not been responsive to the power button since then (although, see below.. I think I can fix it).
Genius Bar took one look at the visible moisture sensor you can see underneath where the RAM sits and declared it water-damaged. While I agree that either a short and/or corrosion is causing my MBP to malfunction, I don't believe it should void my warranty because the problem isn't that I spilled something on it.1
I hope someone can give me some insight into fixing this myself. Apple says "the Logic Board needs replaced" (a common CS response, I've noticed) the water damage voids my Extended Care + that it'll be at least $1200 and several weeks. Here's the situation:
MBP will not turn on just by pressing the power button. However, MBP consistently (every time) powers up when I do an SMC reset.
I have it in verbose mode and it begins booting. But, it will invariably turn off without warning anywhere between 30 seconds and 8-10 minutes after powering up.
MBP will not turn on just by pressing the power button. However, MBP consistently (every time) powers up when I do an SMC reset.
I have it in verbose mode and it begins booting. But, it will invariably turn off without warning anywhere between 30 seconds and 5 minutes of powering up.
Eighty percent of the time, it turns off during the pre-Xorg boot. However, I have also seen it fully boot, I log in, I'm able to peruse logfiles/etc. Safe Mode (holding shift) crashes early. Single-user mode makes no difference. PRAM/NVRAM/etc makes no difference. I can boot to the Recovery Partition but it turns off just the same (disk utility scan takes too long).
I haven't been able to really test the Internet Recovery because the hotel wireless takes too long. I did boot into Hardware Test and it passed the basic and extended tests (although it seemed to just be testing the RAM integrity.
I can boot from the optical drive with a FreeBSD 9 livecd and an Ubuntu 11.04 livecd. Of note is that the laptop shuts off consistently when FreeBSD begins the journaling services for the ZFS filesystem (every time).
Here is where this leads me to believe I'm at (I am not dogmatic here and would appreciate any corrections or insight):
It seems like there may be corrosive damage on the logic board but maybe it's isolated given the various consistencies in what's happening. It seems like whenever SATA is use, I lose power. When SATA isn't really used (the HW Test), the laptop has literally stayed on for days and days.
I want to get in there and clean up any corrosion with 91% isopropyl alcohol (9% distilled, non-conductive water).
I want to use a bootable OSX livecd with an "emergency console" so I can, basically, use boot options to step throught the boot process and see if I can isolate the problem.
Here is what I'm uncertain about and could use guidance:
Does any of this sound remotely reasonable to anyone who has been through this or am I delusional?
Any tips on identifying and cleaning any corrosion?
While I had made a bootable version of Lion via Disk Utility and a rescue disk with some third-party app, they are MIA and I don't have another Mac at the moment. Do I have any other options? Again, an install dvd is not exactly what I want -- more like a rescue dvd. I had read about some Apple Stores giving/copying bootable USB thumb drives like this to customers. But, I noticed that this is now on sale there for $80. I would use this like once and, ideally, could use my MBP to make more. $80 seems a bit much.
I should be able to step through the boot process in a way like what's possible with FreeBSD, no?
Anyone have any other specific troubleshooting tips?
I really, reallly need my MBP back as soon as possible. I'd really appreciate any wisdom and insight! Thank you,
-ryan
To be totally honest, about 3 weeks prior I spilled some milk from cereal on the desk and a little bit got onto the battery. However, the notebook worked fine for the following weeks. I believe that the problems have been caused by ambient humidity ... I've been staying in a hotel that steams up the entire room when I take a shower. The windows are covered in water droplets so why wouldnt the MBP be affected? As noted, these problems began after I lingered in a hot shower.

multiplryan wrote:
To be totally honest, about 3 weeks prior I spilled some milk from cereal on the desk and a little bit got onto the battery.
I don't think you have a case.
You can replace the logic board yourself if you are a DIY'er and save some money.

At max how many logical columns can be created in RPD

Hi All,
At max how many logical columns can be created in RPD. I have a requirement of creating 200 columns. Will there be any problem .
Is there any predefind number of columns for RPD creation??
Please help ..

Hi Annapurna,
There's no limit that I'm aware of or which is mentioned anywhere. Just as an example: I have a logical fact table with around 750 logical columns (>500 original measures & 250 derived measures). No issue whatsoever. Opening the presentation table through answers takes about 2-3 seconds (the NQSQL command has a lot to retrieve), but that's about it.
Cheers,
C.

How many certificate in needed for push notification please tell me all steps ?

how many certificate in needed for push notification please tell me all steps ?

Your System Details shows;
Installed Plug-ins
Garmin Communicator Plug-In 4.0.4.0
Garmin Communicator Plug-In 4.0.3.0
Having more than one version of a program may cause issues.

Taxonomy - how many training documents needed for automatic classification?

Greetings,
I have an example based taxonomy.
I have trained the taxonomy manually with about two documents and expected it to classify automatically after that which it has not done.
According to the URL below
http://www.scribd.com/doc/7234683/Retrieval-and-Classification-TREX-Features-and-Functions
it is mentioned that "You can also classify documents automatically. A prerequisite for this is that there are existing document classes with sufficiently correctly classified documents that meet the classification criteria"
Please advise if training the taxonomy with only two documents which I did was too little - exactly how many documents are needed? (the above URL does not give an indication of a number)
Regards,
Keith

Still trying to solve the problem, adding and tailoring documents as best as I can.

How can i decide how many dimensions are needed here.and which charactersti

Hi,
i am planning to create custom defined cube for sale order line item data. how can i decide how many dimensions are needed here.and which characterstics are suitable for that dimensions.
Thanks,
chandu.

Hi Chandra,
How many dimensions are needed and which characteristics to be used totally depends upon the data model you are using.
for instance take an example of school.
teachers , students are the imp terms in this example .
you can choose these two as dimensions .
teacher's name , address , subject , class , designation etc can be its characteristics . and for students also the important terms describing them can be its characteristics.
for more understanding of the Dimensional Modeling you can refer to following link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84
Hope It Helps .
Regards
Pratap

I bought the 5s in USA above one month ago. I want to change it to 6. How many money I need to add?

I bought the 5s in USA above one month ago. I want to change it to 6. How many money I need to add?

There are not trade ins.
You could sell you iPhone to someone and buy a new one.
You could see if your local carriers/stores offer something like this.

How many gb I need and is 16 bg enough.

how many gb I need and is 16 bg enough

kenneth almere wrote:
how many gb I need and is 16 bg enough
No one here could possibly know if 16GB is enough for your intended usage. Have you had an iPhone or smartphone before? What was it's capacity? Did you ever run out of space?
I have an old iPhone 4 8GB that worked wonderfully, but I made sure to be very selective about what apps I installed, I deleted apps that I no longer needed or wanted, and I imported my photos & videos to my computer on a regular basis and deletde the unneeded ones from my iPhone. When I got a larger capacity iPhone, my usage did change, mainly because I had more flexibility.
To be honest, if you can afford the difference in price, it's worth getting the largest capacity version of the iPhone that you want. For example, a $200 difference to go from 16GB to 128GB is a decent deal, but even on my current device, I'm rarely using more than 10 GB of storage.

How many repositories we need to perform 2way or 3way merge?

Hi,
how to perform merging? and How many repositories we need to perform 2way or 3way merge?

Hi,
2 way -
2way merge is used when both the repositories are completely different from each other,like sample sales and usage tracking.
Current repository is the one that we merging changes into it
Original repository is Dummy(empty) repository
Modified repository is Usage tracking repository (or) repository that you want to merge.
So here we use three repositories in which one repository is empty.
3 way -
3way merge is used when both the repositories are identical in many ways but with some differences,like BI Apps 7.9.5 and modified 7.9.3 (or) merging developement repository with production repository.
Current repository is Original BI Apps 7.9.5 repository
Original repository is Original BI Apps 7.9.3 repository
Modified repository is Modified 7.9.3 repository
Here we use three repositories.
Regards,
Srikanth

How many platforms we need to monitor in FUSEHQ

how many platforms we need to monitor in FUSEHQ

Hi,
2 way -
2way merge is used when both the repositories are completely different from each other,like sample sales and usage tracking.
Current repository is the one that we merging changes into it
Original repository is Dummy(empty) repository
Modified repository is Usage tracking repository (or) repository that you want to merge.
So here we use three repositories in which one repository is empty.
3 way -
3way merge is used when both the repositories are identical in many ways but with some differences,like BI Apps 7.9.5 and modified 7.9.3 (or) merging developement repository with production repository.
Current repository is Original BI Apps 7.9.5 repository
Original repository is Original BI Apps 7.9.3 repository
Modified repository is Modified 7.9.3 repository
Here we use three repositories.
Regards,
Srikanth

How many Licenses I need for a Web facing Sql Server

Hi
I have a intranet web site with 15 users connecting to it. The web site is facing a Sql Server 2012 Standard. I have following questions.
1. If I use a specific Windows account with impersonation how many CAL is needed.
2. If I use a Sql Authentication, how many CAL is needed.
Ravi

Hello Ravi,
I dont think 'SQL Server licensing is dependent on SQL and windows authentication.Its correct that it is CAL based and best answer will be provided by Licensing expert
For more detailed information regarding to the license issue, please call 1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist. For international customers, please use the Guide
to Worldwide Microsoft Licensing Sites to find contact information in your locations.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

How many LOGIC installs?

I am a music teacher at a small boarding school and am putting together a proposal for a Digital Music Production class......I already have Logic on two machines.....my personal laptop and the music room computer.....I'm wondering how many intsalls of LOGIC are possible? I'm hoping to add 4-6 more DAWs.
Thanks
Zack

For personal/private use you may install LPX on as many Macs as you own and control.... using your Apple ID you used to purchase LPX initally.
However for classroom use.. you will need to purchase a multi user license / EDU license..to be fully legal.
Contact Apple directly for further information.
http://www.apple.com/contact/

How many DNS record need to create in Internal & external DNS server for exchange?

Hi friends,
I recently installed Exchange Server 2010 in my organization for testing purpose and I've register a pubic ip too for exchange server on godaddy.com. How many
internal & External DNS records reqired to configure on external & Internal dns server so my all feature like Auto-discover, Activ -sync,& webmail start working perfectly.
It's my first time configuring exchange for a organization.
Thanks & Regards,
Pradeep Chaugule

Hi,
Just as what ManU Philip said, you need to create
Autodiscovery.domaincom and mail.domain.com for external dns server.
Generally, you configure your Exchange Servers as DNS clients of your internal DNS server.
Refer from:
http://technet.microsoft.com/en-us/library/aa996996(v=exchg.65).aspx
Best Regards.

Ethernet port dead- new logic board needed?

The ethernet port on my 2010 iMac 21.5" died after a storm last week, so I brought it to the Apple store to have it checked out. They said it needs a new logic board since the port is connected to it, which will cost around $700. I can't see spending that much money to fix it, anyone have an ideas on where I could sell it for parts? The guy I spoke to at the store said to give it a shot

Is your wireless still working? You could connect your Mac over Wi-Fi instead, if you still wanted to use the Mac, that is. Or use a USB Ethernet adapter. Apple sells one for $50 that was primarily for the Macbook Air, but will work with any recent mac. But if you already have Wi-Fi, then I'd try that. And if you don't have Wi-Fi, it still may be useful to try Wi-Fi first because even if the Mac's Wi-Fi doesn't work, you can still attach other computers or devices like iPads or iPhones, etc. Whereas it would be a waste to buy the USB ethernet adapter only to find out that the USB ports on your Mac were also affected by the storm.
Otherwise, as usual, you can always sell on eBay & Craigslist.

How many logic boards needed ?!!

Similar Messages

Maybe you are looking for