How many sets of wireless headphones can I connect to my iPad at one time?

Did you mean Bluetooth? One. Did you mean FM or infrared, driven from the 3.5mm output jack? Any number of them, assuming you use the same frequency to receive the stream.

Similar Messages

How many Bluetooth 4.0 devices can be connected to a iPad or a MacBook?

I want do develop an app that will show information from many Bluetooth 4.0 units.
Can this be done on an iPad, or do I need a Mac?
Maybe I even need to
Make a unit than collects all the data and transfers it to the iPad or Mac on WIFI?

I think it's still one device of it's kind at a time. For example, if you wanted to use a Bluetooth number pad and a keyboard at the same time, that wouldn't work. It's one or the other.

How many BW 7.3 systems can be connected to one HANA database?

Hello Gurus,
For Development,Test and sandbox environments customer likes to share one HANA database for multiple SAP BW systems.
So how many BW 7.3 systems can be connected one HANA database (ofcourse on single HANA appliance)?
Can i install multiple HANA Databases on single HANA hardware?
Can someone help me on these questions.
Thanks.
Srikar

Hello,
i would suggest reading this blog:
How BW-on-HANA Combines With Native HANA
sap_user_union_001 wrote:
Today, HANA 1.0 SP3 was released.
I was not able to find it in downloads - are you sure it is already released?
sap_user_union_001 wrote:
You can connect as many systems as you want with the HANA (also 3 BWs).....The problem is, that you only have 1 system, which is able to put the data real-time into the HANA via SLT...the other systems will load their data via ETL into HANA...
I am not aware about any such restriction. It should be possible to have as many SLT systems replicated as you like. Can you explain why only one SLT is possible?
Tomas

How many 3440 x 1440 monitors can you connect to the latest MacPro?

How many 3440 x 1440 monitors can you connect to the latest MacPro?

Apple is not clean in:
Mac Pro (Late 2013): Using multiple displays - Apple Support
It includes
Can I connect more than 2 DVI or HDMI displays?
Mac Pro supports a total of two DVI or HDMI displays when connected via the built-in HDMI port or using the Apple Mini DisplayPort to DVI adapter. To connect additional DVI displays, use an active DVI adaptersuch as the Apple Mini DisplayPort to Dual-Link DVI adapter. You can connect up to six active adapter DVI displays. This requires a powered USB hub since Mac Pro offers four USB ports and you will need six to connect them all.
However, that article says:
Six Apple Thunderbolt Displays (27-inch), Apple LED Cinema Displays (27-inch), or third-party Mini DisplayPort displays.
So it appears you can with active dual-link DVI adopter or monitors with a display/min displayport connection.

How many instance of remote desktop can i connect concurrently or can i connect the machine on remote and also work locally?

I am using windows server 2008 r2 edition. i want to know how many remote computers can connect to the server at a time and also can i use the machine locally when it is already connected to a remote desktop.
Amit Mukim

Hi
when you are locally logon on server 1 rdp connection can connect with Full remote desktop,But 2 active Remote session can connect on server 2008 r2 at the sametime without RDP service role.
If you deploy remote desktop service role on the Server 2008 r2 it depends your current RDP licence.
Detailed information RDP licence;
https://technet.microsoft.com/en-us/library/cc753650.aspx?f=255&MSPPError=-2147217396

How many wireless devices can be connected at once to an airport extreme?

How many wireless devices can be connected to an airport extreem at one time? I have 4 iphones and 2 ipads, a goolge chrome and 4 wired devices.

Any AirPort Extreme produced since 2008 will support up to 50 wireless devices and 150+ wired devices simultaneously, so this should accommodate most users in most homes.

How many RE1000, range expander's can i use ?

Hi,
How many RE1000, range expander's can i use ?
Our home is constructed of a Basement, first floor and second floor.
Each floor Area is120 Square foot = 385 Square meter
*Each floor is 115 foot in length a, 37 foot in width. And 10 foot in height.
Is it enough to buy the following product to cover the building?
One Cisco Linksys ER4200
Two Cisco Linksys RE1000 (Wireless-N RangeExtender/Bridge).
Looking forward for your support.
Beat regards,
Asad

rajansarc wrote:
Can anyone help me to setup the RE1000 as the BRIDGE using built-in Ethernet port?
I have the WiFi setup (DLink WiFi Router) in my Ground floor.
In the second floor I have setup RE1000 and can extend the WiFi signal from DLink WiFi Router in the ground floor.
If I connect my desktop computer through the built-in Ethernet port (With Wire) of RE1000 (second floor), I could connect only the Extender (RE1000), But I could not connect the computers available in the ground floor(connected in DLink WiFi Router) from the second floor.
How to setup Ethernet Bridge?
I also find the specification like this at http://www.youtube.com/watch?v=e45VyoqOI5k
"Includes a built-in Fast Ethernet (10/100 Mbps) port, which works as a wireless bridge to instantly connect any wired Ethernet device to your network."
Kindly help me.
To set it as bridged, you can just setup the wireless settings on it (the same w/ your router) and connect it to a device that you want to connect it with.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

Is there a limit to how many MS personalized domains you can have under one live account?

Microsoft personalized domain names for anywhere access
I have setup two separate essentials servers “anywhere Access” using my own Live ID account.
Server1.remotewebaccess.com and server2.remotewebaccess.com Both work perfectly.
Is there a limit to how many MS personalized domains you can have under one live account?
Staple Bench Computers

I think it is five
Grey

How many different binary search trees can store the keys {1,2,3}

I am having a hard time answering this question:
How many different binary search trees can store the keys {1,2,3} or how about {1,2,3,4} and how did u figure this out?
Any responses helpful
Thanks!

the.maltese.falcon wrote:
practissum, shame on you for doing this chap's homework for him. @ the OP, this is a Java forum, not a basic data structures forum.
Also, you forgot the cases
3
1
2and
1
3
2
the.maltese.falcon, I was just trying to help him get started with the base case. Notice that I didn't enumerate all of the possibilities, but was trying to help the OP get on the right track. You, however, have done this. So shame to you, sir!

How many types of reports we can see in BI..?

Hi
I am new to BI
How many types of reports we can see in BI..?
I got some here like
1) COPA reports
2) Costbased reports
3) Artist p& L
4) HMF test...export active sheet....export shole wb..
Upload
PABEL
NPS...
i wanted to know what is PABEL
NPS...etc..? how many are there...?
please help me guys..
thanks for any information,,
praveen.

Hello,
Not sure what all of those are so you likely need to post your question to one of the classic SAP Forums:
http://forums.sdn.sap.com/index.jspa?categoryID=1#16
Or
http://forums.sdn.sap.com/index.jspa?categoryID=1#44
Thank you
Don

How many partitions and operating systems can you line up in BootCamp?

A quick question, hopefully with a quick answer.
How many partitions and operating systems can you line up in BootCamp?
Are we limited to just 2, or can we have more?
Say, for example, Mac, Win XP, Win Vista and Linux maybe?
Thanks in advance.

VPC does not run on Intel Macs. If you wish to use virtualization on an Intel Mac see this:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not yet fully developed for the Mac - some features are not yet implemented - but it does work otherwise.
6. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.
Boot Camp is only available with Leopard. The Boot Camp Beta that was used with Tiger has expired and is no longer available for use. So contrary to the other poster's comment, Boot Camp isn't truly "free." You must purchase Leopard to get it.
You can upgrade XP to Vista without having to make any changes to the Boot Camp partition. Vista can either perform an upgrade install or erase the Windows volume before installing Vista. You don't need to do anything to change the partition via Boot Camp. However, if you need to enlarge the partition, then the only way that can be done is to first use Boot Camp to remove the partition. Then use Boot Camp to make a new, larger partition. All data from the Windows partition will be lost.

How many non-leading ledgera we can assign to the one leading leder?

hi,
how many non-leading ledgers we can assign for one leading ledger..?

Hi Vijaya,
1)The number of iViews that you add to a Page depends on the Page Layout that you use and your requirement. Adding too many iViews to a page will make the Page look too filled up.
You can arrange the iViews in a Page by selecting an appropriate Page Layout and then adding iViews to it.
2)Normally, we create iViews and assign them to a Page, page to a Workset, workset to a Role and that role to a User.
Yes, u can assign an iview directly to a workset but then a page can contain all related iviews together and then that page can be added to a workset. Adding each ivew to a workset is not recommended.
By adding iviews to a page you can determine the arrangement of the content by selecting a layout from among different predefined layouts. You dont have this option in workset though.
Please reward points if foung useful.
Regards,
Becky.

How many airport express can be supported by software remote at one time.

how many airport express can be supported by software remote at one time?
I mean remote software can control at one time

Well Apple makes an iOS application called 'Remote' it's used to control iTunes on a Mac, Or to control an Apple TV Multimedia features.
Apple also makes "AirPort Utility" for iOS. Airport Utility can be used to configure Aiport Extrem, Airport Express And Time Capsul using an iPad, iPhone or iPod Touch. You can use it to connect to one device at a time. While connected to the device you can configure it to work as part of a larger Airport network. If you want to configure muliple device, you would connect to one device, configure it, And then connect to the next device, and configure it, and so on and so fourth.
I haven't found a limit.
How big of a network are you trying to make?

How many parallel BPEL child processes can be invoked on single BPEL server

Hi,
Can anyone pls let me know
1. How many parallel BPEL child processes can be invoked on single BPEL server at same time?
2. How number of Invoker threads, Worker threads and DB connection pools are affecting the BPEL server's listener thread spawning capacity?
Thanks in advance.
-S

Hi James
Here is my problem. I need to do this for load balancing. I have two instances of SOA Suite running on single machine, i.e. two different BPEL servers. Now i need 2 BPEL instances on each server, i.e. two SOA Suite and four BPEL instances (Two BPEL servers on each SOA Suite)
I tried to create a new OC4J instance on my app server and named it as OC4J_new. By default OC4J instance would have these application installed:
ascontrol
ccore
coreman
datatags
default
esb-dt
esb-rt
gateway
hw_services
javasso
orabpel
orainfra
policymanager
ruleauthor
rulehelp
But when i create new OC4J instance, i can see only these applications:
ascontrol
datatags
default
javasso
How do i get rest of the applications in my new OC4J Instance??
I tried deploying .EAR files but it failed all the time. What are possible fixes?
Many thanks in advance

How many sets of wireless headphones can I connect to my iPad at one time?

Similar Messages

Maybe you are looking for