How many times does the JDBC sender adapter retry ?

Hi All,
How many times does the JDBC sender adapter retry in the ' Retry Interval' specified .
I know that it retries after the time specified in the ' retry interval' , but if it again fails after the first retry will it retry again and again .And while doing it will it block the next Select query which should get executed.
Thanks & Regards,
Rahul

Hi,
The no of times to be retired on failure of message is default 3 times.
You can set this in Visual Administrator->Server->Services----> SAP XI Adapter
Thanks
Swarup
Edited by: Swarup Sawant on May 30, 2008 7:19 PM

Similar Messages

How many times does the VideoEvent.READY event get fired?

Hello,
I have 2 videos I am loading via VideoPlayer.load(url). I
have setup eventlisteners(VideoEvent.READY, onVideoLoaded) for each
video so when the videos are loaded my function is called. How many
times should my function onVideoLoaded be called? I assume once for
each video. This is not the case because my function is called
multiple times for the first video and not called at all for the
second video. Can someone to me why? Is this a bug with AS3? Any
help would be appreciated.
Regards,
Nilang

Hi,
The no of times to be retired on failure of message is default 3 times.
You can set this in Visual Administrator->Server->Services----> SAP XI Adapter
Thanks
Swarup
Edited by: Swarup Sawant on May 30, 2008 7:19 PM

How many times does the licence allow me to reinstall windows 7?

I have reinstalled once in the past and now I need to again. Something is slowing down the system, so I wish to eliminate possible bug infections. Is there a limit to re-installations? How many chances do I get to get it right? Thank you for
your help.
Non-technical history but willing to replace SSD and/or memory sticks if needed.

Please excuse me for not replying sooner, due to work commitments. For speed, BT only gave an upto figure, 10mbps. I replied my checking revealed only 0.75 to 1.3mbps attained. They asked more questions about the set-up, which they could not fault.
Then they claimed that connection had been lost, that it might be problems with the broadband. The PC then crashed and I had to force a shut-down and restart. Over an hour that all took.
I am wondering now if software such as 'malwarebytes.com' when scanning for bugs, do they scan only the C-drive SSD in order to clean the PC, or do they also scan the D-drive HDD. I use mine for storage of photos and also some downloaded GIF's.
Since I used 'malwarebytes.com' a virus API.Gravity.com has reappeared on screen.
Is it possible for a virus to get further into the machine, past the memory banks and not be cleaned by Norton or any of the cleaners?
If I format the SSD and clean everything off, will it be as clean as a new one. I am beginning to think it would cheaper just to buy a new SSD and start again.
Sorry this all taking so long, I cannot seem to shorten it. Very glad of your knowledgeable advice. Thanks yet again.
John.
Non-technical history but willing to replace SSD and/or memory sticks if needed.

How many times can the photoshop code be used? Like can I download it on one computer then later download it on a different computer?

Basically the title explains my question. How many times can the photos hop code be used? Like can I download it on one computer then later download it on a different computer?

You're allowed two installations/registrations. Anything above that requires deregistration on one of those computers.
Take note that if this is Photoshop CC, it's as easy as signing out on a system; there aren't any serial numbers involved as it's all tied to your Adobe ID.

In ST03 , how can i see the Query name, user id,how many times executed the

HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
EX:-if there is one report name X,I want to know how many users had executed X report today,weekly,monthly.
ex:-query userid total number of execution
sales order 0000555 5 times
custmer 05855 2 times
fast reply will be appreciated,

Hi,
Look here:
http://help.sap.com/saphelp_nw04/helpdata/en/3b/54df4204892a78e10000000a155106/frameset.htm
Also check these:
http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/b8be3befaefc75e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/ece73a39e74d27e10000000a114084/frameset.htm
Hope this helps..
Bye
Dinesh

How much time does the dowload of photoshop CC take ?

How much time does the dowload of photoshop CC take ?

Hi Saurabh,
I am facing the same problem. It is taking very long time in "Create Database Schema".
How the problem got resolved for u?
My Laptop capacity is 500 GB (USB), 2 GB Ram, Dual Core Processor.
Any idea how long it will take in this configuration?
Thanks in advance.
Vijay G

How many minutes does the iPad 2 record in the video mode of the camera?

How many minutes does the video mode on camera (ipad2) record?

It should only restart once, see this article:
iTunes: Restoring iOS software

How many sites does the 35.99 get you

Hello with business catalyst how many websites does the 35.99 get a client? I am a new partner and want to be sure I am giving correct information. Am i reading this right that it gives you 5 sites?

Hi there,
If you are a creative cloud account holder and paying the monthly for that you get 5 very basic versions of BC.
For that price you mention:
http://www.businesscatalyst.com/pricing/yearly
You get one webcommerce package (1 site)

I created an apple ID account to my Iphone, but the system doesn´t send the verification link to my email adress. I tried many times with the buton "send verification email" but doesn´t work.

I created an apple ID account to my Iphone, but the system doesn´t send the verification link to my email adress. I tried many times with the buton "send verification email" but doesn´t work. My mailbox doesn´t receive any mail.
My account work correctly.
please I need help.
Thank you.

It's a really bad idea to post your email addresess - it's an invitation to spam - and I've asked the Hosts to remove them.
This is a user-to-user forum and no-one on here can take any direct action. If your Yahoo address is not working that's something you would need to take up with Yahoo - have you checked it by sending yourself an email to it?
Otherwise you will need to contact Support: go to https://expresslane.apple.com/ and click on 'iTunes' in the center column and then 'iTunes Store' in the right-hand column and proceed from there.

How many songs does the 8GB Nano hold?

How many songs does the 8GB Nano hold? I wasn't sure which one to get. Does it hold 2,000 songs?

Thanks.

I have adobe CC. How many machines does the license allow? I am running Win 7 Pro.

I have adobe CC. How many machines does the license allow? I am running Win 7 Pro. Was wondering if Adobe CC allows for multiple machines and if so, do I download the original invoice number of Adobe CC that I have?

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each

How many times should the computer cycle on-off when doing a factory reset?

I have a Toshiba A665-S6065 which can not boot. Yesterday I tried the Auto Recovery by holding the 0
while booting, and following the default instructions. It seemed to complete without errors. But the computer
will still not boot. Today, when reading the instructions, it said to expect the computer to cycle on and off severa
times. So how many times? will there be any propmts or messages? How long should the entire process take?
How long should the computer be off before it turns on again each time? I think I might be screwing things up
by intervening and trying to start the computer myself because it isn't clear to me what should actually be happening.
Could someone please tell me what to expect before I start looking at possible hardwre problems?
BTW, I can access the Setup and Boot Menu.
Thanks,
kjdroid
NEW info:
Now when I boot while holding the 0 key, instead of going directly to the Recovery Wizard, it goes to the
Windows Boot Manager.
from there the options are Windows Setup [EMS enabled]
and Windows Memory Diagnostic, as well as the F8 option for advanced options.
If I select Windows Memory Diagnostic I get
File: \boot\memtest.exe
Status : 0xC000000f
Info : The selected entry could not be loaded because the application is missing or corrupt.
If I select Windows Setup or F8 followed by normal windows startup or startup in safe mode then
I get the following sequence of events.
Starting Windows with the Windows logo.
then the blue screen
Then to the Toshiba Recovery Wizard, where it partitions, and does the CRC and then prompts to press
finish to restart the computer.
Either the computer does not shut down, or it stops and starts very quickly because all the lights cycle
on and off but it does not appear that the start/stop light actually ever turns off.
Then I get the Starting Windows with Logo again.
Then the Recovery Wizard comes back but only with the screen about partitioning. It does not
do the recovery and CRC this time.
Nextis the Toshiba Logo reappears again with the options for F2 or F12 for the Setup and Boot Menus.
Finally, I get a blue screen and it appears nothing else is happening. I let it sit for 30 minutes before I retry, because I am not sure what is supposed to be happening now.
Also, one of my attempts, I got as far as the messages:
Setting up the Registry
Starting Services
Applying System Settings
Will continue after restarting your computer
Is preparing your computer for first use.
But then again, it just goes into the blue screen state until I finally decide to shut things down.
Am I being premature or should I let the blue screen sit there for a few hours while work is being
done in the background? I don't hear any sounds from the computer that would indicate any type of activity.
Thanks again
kjdroid

Actually, it's kind of hard to tell you what to replace. If you have a spare hard drive laying around, go for it. It also could be memory issues (I have the same model as you) & it was my sister-in-law's notebook before I get it. The notebook had several memory dumps that CCleaner found & deleted when I was working on it.
I told her that I would re-install it for her to make sure there no viruses or such. After backing up the computer, I proceeded to what was supposed to work, pressing "0" at startup to no avail, then booted into the area where the system restore, command line repairs & such were, & there was the option for a factory reset, the last option. I chose that one, & like you stated, it rebooted numerous times, until finally it was through. Longest factory re-install I've ever done.
What led me to believe there were memory issues was during the first round of updates, it BSOD'd, another memory dump was found by my portable CCleaner. It still had the original Samsung PC3-8500 memory, so I took the memory that shipped with my MSI (PC3-10600) & installed that, then not only was all fine, it was noticably faster. Once I got it fully updated & scanned with MBAM & the ESET Online Scanner (I always do this when installing or re-installing a computer), I removed my memory & placed hers back in, then returned it to her.
I ended up with it about 10 days later, she said it was still dumping. Needing a spare notebook, I offered $100 for it, ending up paying $150, but still came out way better than on eBay.
Once I got it, I placed the 6GB RAM back in there that I had, & also replaced the HDD with a extra Crucial M4 that was laying around. Right before swapping drives, I ran HD Tune (free) on the original, there were yellow attributes, meaning that it had issues pending. It's a 500GB Seagate HDD that runs at 7200 RPM. Just so happened, I lost a 500GB Seagate Barracuda desktop HDD (7200.11) less than a month ago. Booted the computer, the screen stated "No Operating System found".
So it could be either the HDD or memory (RAM). Or worse yet, the MB itself. Has it been dropped? Notebooks are fairly durable, but they don't take to being dropped very well. Does it run hot? If so, there may be severe dust buildup that's causing it to overheat, that will make it BSOD. My guess is that's it's one of the first three that I mentioned above & if it's the MB, forget it. Prices are too high, even for used ones & in a notebook, it's basically a total teardown to replace it. If it's a new MB, it may cost between $200 to $400, depending on popularity of the model. That's too much to pay to repair a computer built in 2010.
I'm trying to give some suggestions here, based totally on personal experience on my & other's computers that I work on. However, online it's a cat & mouse game. I don't want to tell you to purchase another HDD unless it's almost 100% certain that's the issue. Which is why I asked if you have a spare earlier. Also, try reversing the position of your memory sticks (a 5 minute job), it's behind that lid close to the battery underneath the notebook.
Post back if you need further assistance. Someone else may have other ideas, so follow the thread.
Best of Luck,
Cat

How many radios does the 2600 AP have?

Hi All,
My question relates to how many clients can be connected to a 2600 series AP. The documentation states 200 clients per radio and the AP has three radios. However when my AP gets to 200 it rejects further clients with the following log:
Thu May 9 15:40:22 2013 AP with MAC: 08:cc:68:0a:39:e0(AP-BrisHen-405081) radio 0: Associated Clients falls below max limit number:200. Failure Cause:Clear Maximum Client Limit Reached in this AP WLAN..
Line 72: 71 Thu May 9 15:40:10 2013 AP with MAC: 08:cc:68:0a:39:e0(AP-BrisHen-405081) radio 0: Associated Clients exceeds max limit number:1. Failure Cause:Maximum Client Limit Reached in this AP WLAN..
I see this exact message many times and each time the radio mac address is the same and the number of clients connected is 199. The same mac address is used for both 2.4ghz and 5ghz so does this AP have a single logical radio covering both 2.4 and 5ghz frequency ranges and is the limit for all connected clients 200?
When viewing the AP details under the Wireless tab it only lists one mac address for each AP for both 2.4ghz and 5ghz frequencies.
Please only reply if you know the answer
Thanks in advance

Thanks for all your responses.
Scott, you noted a max client limit of 1 which I'm guessing you've got from the log entry
Line 72: 71 Thu May 9 15:40:10 2013 AP with MAC: 08:cc:68:0a:39:e0(AP-BrisHen-405081) radio 0: Associated Clients exceeds max limit number:1. Failure Cause:Maximum Client Limit Reached in this AP WLAN..
The limit 1 refers to how many clients over the max limit failed. As a log is created for each failure every entry will be 1.
Our problem is we have 200 client devices in a charging rack near a single AP. Whilst they are charging and turned on they consume very little bandwidth. These devices are not PCs or laptops and consume very little bandwidth when they're in use and this is confirmed by the switch interface reporting throughputs of about 5Mbps for all devices on the wifi network which consists of 11 APs and a single WLC.
I will try and limit the number of clients per AP down to 100 for the AP at the charging rack and 60 for all other APs and see how we go.

How much time does the ESS import take?

Hi,
How much time does import of ESS into NWDI take?
I have selected following files for import yesterday:
SAP-JEE
SAP-BUILDT
SAP-ESS
SAP-JTECHS
SAPPCUI_GP
and looked at it today and it is still importing.
In CMS Transport Studio State column displays message: Import running.
Any ideas why it takes so long?
Regards,
Ladislav

Hi,
I have imported files one by one in this order:
SAP-JEE
SAP_BUILDT
SAP_JTECHS
SAPPCUI_GP
SAP_ESS
Is this order correct?
I didn't import EP_BUILDT - is it required?
I have checked the CBS logs and there is one broken DC in SAPPCUI_GP compartment
in the pcui_gp/isr development component.
The build log contains this error:
    [javac] Compiling 316 source files to /usr/sap/PDI/JC26/j2ee/cluster/server0/temp/CBS/3/.B/22/t/0C0A08ED5B9ACC3F0164FD6D8A0DB879/classes
     [javac] ERROR: /usr/sap/PDI/JC26/j2ee/cluster/server0/temp/CBS/3/.B/22/t/0C0A08ED5B9ACC3F0164FD6D8A0DB879/gen_wdp/packages/com/sap/pcui_gp/isr/isrprocessevent/FcISRProcessEvent.java:470: cannot resolve symbol
     [javac] ERROR: symbol : method getWebContextAdapter ()
     [javac] ERROR: location: interface com.sap.tc.webdynpro.services.task.ITask
     [javac] ERROR:                               .getCurrentTask()
     [javac] ERROR:                                                                ^
     [javac] WARNING: Note: Some input files use or override a deprecated API.
     [javac] WARNING: Note: Recompile with -deprecation for details.
     [javac] 1 error
Maybe because of this error the requests are queued?
How to fix this?
Regards,
Ladislav

How many discs does the imac come with?

How many discs should the imac come with when first bought and what are they?

Lovely collection of tags there. How does the question relate to iPhoto?
Regards
TD

How many times does the JDBC sender adapter retry ?

Similar Messages

Maybe you are looking for