How many voice messages can be stored on Skype?

Hi,
1. I wonder how many voice messages can be kept on Skype account?
2. How long can be one voice message?
Thanks

You have to consider the comression though Ron, when you say that a nano will fit a thousand three min songs this is at a bitrate of 128kbs, with audiobooks you buy from say audible for example, they have four quality settings the highest being format 4 which encodes is 32kbps, this is fine for simple speech but would be terrible for music.
So with this in mind such a low bitrate would use on average four times less space, so 50 would go way upto 200. But some of the books I listen to are upto 40 hours long!, anything as small as 3 hours would likely be a crappy abridged version which is no use to anyone.
Also remember that you won't really need to keep more than 1 or 2 books on there at once, I mean why would you want to keep a whole library on there when they can just sit on your PC incase you ever want to listen to them more than once.
Personally I use the highest bitrate possible for my audiobooks, such as 80 or 128, just depends what bitrate the file I have are in, I never need the space because I have few songs and only put one book on at a time.

Similar Messages

  • How many voice messages can iPhone hold

    How many voice messages can an iPhone hold? Keep losing callers because they are told message box
    is full?

    I believe it depends on the carrier.  But a general ballpark is between 20-30.

  • How many maximum records can be stored in One IDoc

    Hi experts!!
                       Please let me know what is the maximum capacity of an IDoc. i.e.,
    How many maximum records can be stored in an IDoc?
    ex: abc,9807,bangalore
          xyz,8976,mysore....... here two records are thr...if u have one lack records like this can we store all the records in one IDoc,....
    Thanks in advance,
    Sunil K Shetty

    Hi Sunil,
    Idoc structure is
    1. Control record,
    2. Data rord,
    3. Status record.
    1.Control record: contain only who is sender,who is receaver, /which type of data,Idoc number.
       IT store the all control records in one table: EDIDC
    2.Data Record: it contains the data records.(multiple records)
      It stores the data records sre stored in one table: EDIDD
    3.Status records: It show the stutus of the record. (It is multiple)
       The status records are stored in one table: EDIDS
    Rewords some points.
    Rgds,
    P.Naganjana Reddy

  • How many Voice connections can cisco 2821 support?

    Good day.
    I have a cisco 2821 with EVM slot, NME-X slot and two HWIC slots. I have 4 port FXOs on the two HWIC slots. The EM-HDA-8FXS module on the EVM slot can handle 8 FXS connections. Please i would like to know if there is an EVM module that can do FXO connections and also how many voice connections can this router handle in total. Can the EM-HDA-8FXS module handle both FXS and FXO connections?
    Hope someone can help me out. My deadline has already passed.
    Regards,
    Obinna.

    Hi, already replied to this in the appropriate forum.
    Please do not open duplicate threads.

  • How many text messages can the iPhone 3gs hold ??

    *upto how many text message can hold 3gs ??*

    About 75,000, depending on available memory. If you get anywhere near that limit you might want to seek help.

  • HT1657 How many rented movies can be stored on an IPad?

    How many rented movies can be stored on an IPad? I've rented 3 but can only sync 2.

    I have an iPad 2 64GB - the three movies would total approx 7.8GB's. I made sure I have plenty of free space 26.8GB's. After the iPad sync's and backs up - I move the movie from rented to "iPad" then click on apply. The third movie never moves over, just back to rented.
    Is there a limit?

  • How many deleted voice messages can be stored in deleted messages

    There are 256 messages stored in my "deleted Messages" on my phone...  How many will it hold?

    It will hold as many as you have memory for. It's a good idea to clear them occasionally. They can eat up quite a bit of storage space over time.

  • How many text messages can be sent?

    Hello,
    I'm in charge of sending bulk text message updates to member's of a club. I own an iPhone 3G with an unlimited texting package. We have 100 members.
    How many people can I add to a text message? For example, could I send a message and add 100 people in the recipient area? Is there a limit? Or could I send, maybe, 4 messages with 25 people in each? Does anyone know the limits of iPhone texting?
    Thanks!
    David

    I don't believe the iPhone has a recipient limit for SMS. A recipient limit would be imposed by the cellular provider.
    The problem with bulk texting with the iPhone is that it doesn't support addressing an SMS or email to a Group. You must add multiple recipients one by one. Hopefully this will be addressed with firmware update 3.0 to be released this summer.
    This will take some time adding each recipient one by one, but give 100 or more recipients a try.

  • How many finger prints can be stored for use on the iPhone 6 plus and iPad air 2?

    my wife and I share the iPhone 6 plus can we both enter a finger print for access and payments On one device?

    Flexter wrote:
    my wife and I share the iPhone 6 plus can we both enter a finger print for access and payments On one device?
    On an iPhone, you can have 5.

  • How many mails i can send at a time per day using APEX mail system?

    HI,
    I am working on application, when i have written a process to send mail, i have a project where i have to send mail at a time for all the email id's
    given list there are upto 5000 email id's where text body also include certain set of data from a report. thinking at a time 3000 its difficult i divided
    it region wise, but still each region have 2000 odd email id's. during testing when i run the process just 950 mails i could send then i got a error
    saying "ORA-20001: You have exceeded the maximum number of email messages per workspace. Please contact your administrator." so please
    can any one help me to know How many mails i can send at a time per day using APEX mail system?
    Thanks in advance
    Gowthami

    Hi jfosteroracle,
    You are getting the error may be the following reason,
    Check the following,
    Login as ADMIN and Goto -->Manage Instance-->Instance Settings--> Mail-->Maximum Emails per workspace
    Actually this number denotes the Number of mails can be sent per 24 hour for the workspace,It may exceeded.
    It may be the reason.
    Thank you.     
    Regards,
    Gurujothi
    Edited by: Gurujothi on Jun 27, 2012 5:54 AM

  • How many ADFS farms can you have in a single forest/single domain?

    Hi
    I may have some terminology incorrect...please let me know if I do. :)
    My question is, how many ADFS farms can you have in a single forest/single domain? If you want to know why I am asking...please read on.
    We have 1 ADFS Farm and we are looking adding services to it. However not every cloud vendor provides a "Identity Broker" with there services.
    We have a consultant that is advising that we need to enable a SAML-based IdP-initiated single sign-on (SSO) ie using "IdpInitiatedSignOnPage"
    However to do this we need to modify the ADFS website to have "drop down" list so the user can select the "Relying Party" and then authentication with them.
    This means we are exposing a list of every company/party we have federated with. The exposure of this information, is deemed a security concern by our company....which I agree with.
    So the consultant advises that we need a separate ADFS farm. I have searched online, but haven't found any information that confirms multiple ADFS farms can be implemented in a single forest/single domain.
    Thanks for reading and if you have any other suggestions...I'd appreciate it.
    Nyobi

    This is not exactly FIM related question - there is ADFS forum available on Technet. However - technically there is no limit of ADFS farms in a forest \ domain. It is just a service which uses AD and is not altering it in any way or storing some forest-wide
    information like Exchange. So you can setup two ADFS services in single forest - no problem. 
    If it is a best solution to your problem? I can't say with that limited information but maybe just customization of pages on ADFS side would be enough? 
    Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl

  • How many NPS server can be registered as radius server in AD

    Hi
    We are using 2x Microsoft (2008 R2 Ent) NPS radius servers for our Wifi authentication for two different SSID on Aerohive WLAN network. 
    Trying to setup radius authentication for our Cisco Network devices and trying to use one of the radius server which we are using for our wifi auth. Followed all the steps but auth keep failing and now I am getting to the point where I am ready to deploy
    new NPS server for this.
    Before I go ahead and complete the install and register the new radius server in our AD, I would like to know if there is a limit for how many radius servers can be registered in Microsoft Active Directory.
    Thanks Heaps
    Sid

    I believe from the older versions, that the limit was 256? But of course, we wouldn't want to go that far.
    If you are trying to configure a Cisco device and you have a Cisco 24/7 Gold Support contract, they will help you and step you through it on both the Cisco side and the Windows side. I've used them before for a Cisco AP 1231 a few years back, and their support
    was phenomenal and well worth the price of the contract.
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • Any way to check how many text messages remaining?

    Hey guys,
    Wasnt really sure where to post this, but is there any number or website I can go to check how many text messages I have left in the month for my plan? Thanks

    You have to go the the ATT website (https://www.wireless.att.com) and create your account, you can view your minutes and and text messages also but be careful because it does not update in real time, it does not add your text messages right away as you send them

  • How many dunning levels can be defined ?

    < MODERATOR:  Message locked.  Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. Suspected points abuse. >Hello friends
    Could u tell me,how many dunning levels can be defined ?
    regards
    AA

    hi anu
    Insap provides max 9 levels but all companies use 4 levels only.If u want use 9 levels also.
    At the time of FBMP configuration u cen give Dunning levels field 9.and then save.U cen run 9 levels inDUNNING RUN F150.
    Deifference is one level to another level DUNNING TEXT.
    Dunning text determines URGENCY OF DUNNING NOTICE.
    U cen give 9 levels dunning text also at the time of fbmp configaration
    Edited by: prasad k on Jul 11, 2008 3:14 PM

  • How many 7920 phones can be supported on one Cisco 1131AG access point?

    hi all,
    who knows that how many 7920 phones can be supported on one 1131ag AP? Thanks a lot...

    Hi Alomar,
    Hopefully this info will help;
    Number of 802.11b Phones per AP
    Before any discussion about network planning can take place, it helps to understand the basics of the overall network capacity.
    The following network capacity guidelines apply to sizing the Wireless IP Telephony network:
    No more than 7 concurrent G.711 calls per AP.
    No more than 8 concurrent G.729 calls per AP.
    Note These design recommendations assume that Voice Activity Detection (VAD) has been disabled on the Cisco 7920 Wireless IP Phones. Use of VAD on the Cisco 7920 phones can conserve bandwidth, but Cisco recommends that you disable VAD on all Cisco CallManager servers to provide better overall voice quality.
    In addition to determining how much bandwidth is needed for an 802.11b VoIP call, you must also consider overall radio contention for a particular RF channel. The general rule is that you should not deploy any more than 20 to 25 802.11b endpoints per AP. The more endpoints you add to an AP, the more you reduce the amount of overall bandwidth and potentially increase transmission delays.
    The maximum number of phones per AP depends on the calling patterns of individual users (based on Erlang ratios). Cisco recommends no more than 7 concurrent calls using G.711 or 8 concurrent calls using G.729. Beyond that number of calls, when excessive background data is present, the voice quality of all calls becomes unacceptable.
    From this doc;
    http://www.cisco.com/en/US/products/hw/phones/ps379/products_implementation_design_guide_chapter09186a00802a0a05.html
    Hope this helps!
    Rob
    Please remember to rate helpful posts.....

Maybe you are looking for

  • Unable to find any active legal regulations for determination proc. "TEST1"

    Hi Guys This is in regards to a Customs document for a Payment doc We have just finished the configuration of the Finance integration which will stop blocked partners during the Payment run Now when we create a Proposal in the Payment run in ECC, the

  • Insert a JSP in a portal application project

    Hi, I have created a portal application project but I am unable to create a JSP file in it. When I right click on my project then new and JSP file, a window appears asking me to fill the name of the jsp file I want to create and the folder in which I

  • ITunes not recognizing music...

    alright now, i got an external hard drive and moved all my music to it and now my iTunes wont recognize them. would anyone know what the problem is?

  • Cost Centres inherited from the Org.

    Hello Experts, Please help. I Have to pull a report asap that lists all org units with their cost centres and cost distributions and I have to indicate where the cost centre / cost distribution was inherited from another org.  I also have to show whi

  • SAP internal error

    Hi All, The user is getting the error while using the planning book. internal error --  /SAPAPO/OM_TS_CHANGE_TG Error reading data - Planning book cannot be processed further. What shall I do ? Please help. Thanks in advance, Prabhat.