How much RAM can my 17" iMac take?

There's alot of conflicting views on this question. Does anybody know the answer? I have read that it can take 3G, others say it is made for 2G.
If I were to have 3G (currently I have 2G) would it actually make a big difference? Are there any empirical studies to support that it does significantly decrease processing time?
All replies are appreciated,
Thanks
Vincenso

It depends on exactly which model of 17" iMac you have, look closely at the difference in the spec's below:
Early 2006 Core Duo: http://support.apple.com/kb/SP35?locale=it_IT
Late 2006 Core 2 Duo: http://support.apple.com/kb/SP28
Note that:
All the 2006 Early Core Duo's and the Late 2006 1.83GHz models only support 2GB of ram.
Only the Late 2006 17" 2.0GHz Core 2 Duo model supports 3GB or ram.
Dennis

Similar Messages

  • So... how much RAM can my Macbook actually take? How to upgrade?

    Hi all. I have a Macbook I purchased around May of 2011. It's the last of its kind to be released before the Macbook was discontinued in July of 2011. I have Snow Leopard and I'm considering upgrading to Mountain Lion because I heard that World of Warcraft no longer supports Leopard, and Snow Leopard is next in line to be dropped. Problem is I only have 2GB of RAM, and while it's treated me well so far, I'd like to upgrade. I've read that my Macbook can take only 4GB through Apple, but I've heard it can take 8GB from other sources. Can I take the safe route and only install 4GB and be okay? I only use my Macbook for web surfing, iTunes, Microsoft Word, and occasionally WoW or games on Steam. So far I can play WoW and Flash games without any issues with 2GB of RAM, but I don't know if that will change when I upgrade to Mountain Lion.
    I know where to buy the proper RAM, but I don't feel comfortable installing it myself. I know Apple won't install third party RAM, so that's out unless I buy Apple (and I wouldn't mind, but I don't know how much it costs.) Where can I take it? Will Geek Squad at Best Buy do it? Or should I just buy from Apple and have them install it? Should I take the "safe" route and get 4GB of RAM or try 6GB? Will 6GB hurt my computer?

    The last MacBooks produced can use 8 GB RAM and you can upgrade them to the latest version of OS X. Purchase memory from OWC / MacSales or Crucial.
    Installing memory is a do it yourself project but if you are not comfortable with that then have an Apple Authorized Service Provider do it for you. Next best choice is to have a competent computer repair shop perform the installation.
    I wouldn't have Best Buy wash my car.

  • How much ram can my iMac take?

    Hi all, just bought a iMac a few days ago and I'm just wondering how much ram can it take as I want to upgrade it. It didnt come with a manual, so I don't know.
    Here's the spec so far
    Early 2008 20"
    Processor  2.4 GHz Intel Core 2 Duo
    Memory  2 GB 667 MHz DDR2 SDRAM
    Graphics  ATI Radeon HD 2400 XT 128 MB
    Software  OS X 10.8.2 (12C60)
    Thanks for any help in advance

    There are two answers: the official Apple answer and the "you're on your own" answer.
    1 - For the official iMac max RAM, see iMac Memory specifications and upgrades
    2 - For the "your're on your own" answer, everymac.com has a list of the Actual Maximum RAM you can put in every model Mac.  In many cases this is more than the official maximum RAM.
    After deciding how much RAM you want to put in your iMac, I suggest going to Crucial.com and use the memory advisor or system scanner to see what RAM modules are compatible with your iMac.

  • How much ram can i max out on imac 20 (2009 model)

    *Hi i have a APPLE MB417B/A iMac 20" MB417B/A*
    *what ram do i need? how much ram can i get? 4g? or 8g?*
    specs are as follows:
    With a 2.66GHz Intel Core 2 Duo processor, 2GB DDR3 RAM & NVIDIA graphics, iMac brings you more performance than ever. iMac packs performance inside a stunning all-in-one design. Includes Mac OS X.
    * 2.66GHz Intel Core 2 Duo Processor
    * Mac OS X v10.5 Leopard - Operating system
    * 2GB Memory - Run more applications
    * 320GB Hard Drive - Load up on photos,videos
    * 20'' Widescreen display - Vivid colours
    i'd be greatful for any help...

    Hello miss_papaya
    That model supports 2 4GB modules for a total of 8GB, only problem is that 4GB modules are currently at a premium price. Have a look at the spec's in the following article or in the User's Guide that came with your iMac.
    http://www.apple.com/imac/specs.html
    Also have a look at Crucial and OWC memory below:
    4GB kit > http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=60D83BBCA5CA7304
    8GB kit > http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=1D7DBABCA5CA7304
    OWC > http://eshop.macsales.com/shop/memory/iMac/DDR3_2009
    Dennis

  • How much ram can be added to a 2007 SL Imac? has 1 gb now and I want to upgrade it; any suggestions?

    How much ram can be added to an 2007 Imac (SL, 10.6.8)? I'd like to upgrade it; any suggestions?

    Maximum Memory
    6.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM

  • How much ram can my Macbook Pro5,4 take? Mid 2009 2.53 gh z, it's already got 4gb and I want up upgrade to 8gb, will it take it?

    How much memory can my Mac Book take?
    Below is the spec:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,4
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.53 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
    Thanks - Seb

    on a similar note, I have 4GB in my 4.1.  I take it that is it's max?
    Model Name:    MacBook Pro
      Model Identifier:    MacBookPro4,1
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    2.4 GHz
      Number Of Processors:    1
      Total Number Of Cores:    2
      L2 Cache:    3 MB
      Memory:    4 GB
      Bus Speed:    800 MHz
      Boot ROM Version:    MBP41.00C1.B03
      SMC Version (system):    1.27f3

  • How much Ram can I add to my MacBook Pro?

    Another non-techie here with a memory question
    How much RAM can I add to my MacBook
    Model Identifier: MacBookPro2,1
    MacBook Pro (late 2006)
    Processor 2.33GHz Intel Core 2 Duo
    Current memory: 2GB (two SO-DIMMs) 667 MHz DDRs SDRAM (PC2-5300)
    The actual installation sounds quite simple.  I just want to be sure I get the right chips.  Any sources you can recommend?
    TIA
    Jim

    http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2 .33-17-specs.html
    3 gb of ram as two modules of 2 gb each.
    Try http://www.macsales.com/

  • How much RAM can go into my Macbook Pro

    Hey, I wanted to ask how much RAM can go into my Mid 2012 Macbook Pro I looked at this guide http://support.apple.com/kb/HT1270?viewlocale=en_US#link1 and it said I can only but In 8 GB I want to put 16 GB but was wondering if this would ruin my computer. I am asking because I have heard about 16 GB going into many Macbooks   Thank you!
    Here are my specs 
    13-inch, Mid 2012
    Memory  4 GB 1600 MHz DDR3
    Processor  2.5 GHz Intel Core i5
    Graphics  Intel HD Graphics 4000 1024 MB
    Serial Number  C1MKLGFEDTY3
    Software  OS X 10.9.1 (13B42)
    Your Mac contains 2 memory slots, each of which accepts
    a 1600 MHz DDR3 memory module.
    If any more info is needed than plz tell me and I will ad it

    The site below is highly recommended by folks on the forum.
    http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade

  • How much ram can I put  In a 12" 867MHZ?

    Hi,
    I've just picked up a 12" 867mhz Powerbook for a very reasonable price! My question is how much ram can i put in it? It currently has 640mb. Also if i can put some more in it will it run Leopard?

    Bear in mind you can customise the install of Leopard to exclude some languages and particularly exclude printer drivers that aren't relevant to you, this will substantially lower the total required space. 12" Powerbooks are rather fiddly to work on - here's a really thorough guide on Hard drive replacement etc. for your Powerbook:
    http://www.ifixit.com/Guide/Mac/PowerBook-G4-Al-12-Inch/53

  • How much ram can I add to my late 2008 MacBook Pro? I run Mavericks and just got a new inexpensive hard drive. RAM is not very expensive so Thought I would bump it up from the current 2MB of 1067 Mhz DDr3

    How much ram can I add to my late 2008 MacBook Pro? I run Mavericks and just got a new inexpensive hard drive. RAM is not very expensive so Thought I would bump it up from the current 2MB of 1067 Mhz DDr3

    Maximum Memory
    8.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

  • How much ram can I install in macbook pro

    I have a 15" Macbook Pro with the 2.4GHZ processor.  Purchased in 2008.  How much RAM can I put in it?
    Thanks!  George

    Here is what I found.....
    Model Name: MacBook Pro
      Model Identifier: MacBookPro4,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.4 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 3 MB
      Memory: 2 GB
      Bus Speed: 800 MHz
      Boot ROM Version: MBP41.00C1.B00
      SMC Version (system): 1.27f3
      Serial Number (system): W881****YJZ
      Hardware UUID: 25EAF703-47DE-5074-AACB-10371AD4B7EE
      Sudden Motion Sensor:
      State: Enabled
    System Version: Mac OS X 10.5.8 (9L31a)
    <Edited by Host>

  • How much RAM can be installed on a MacPro4.1?

    How much RAM can be installed on a MacPro4.1?

    physically 8 x 16GB, addressable in 10.8.3 is 96GB
    you still on snow leopard? you can also use that.
    6 x 8GB is probably more or as much as you need and try www.macsales.com/memory for kits

  • How much ram can my MBP support?

    First of all, there are two slots for RAM in a MBP, right?
    Is there a limit to how much each can support, and a total limit for both?
    I just discovered an article on DIGG about 8 GB sticks of RAM, and it got me thinking.

    The actual amount of RAM depends on the specific model, since you don't mention that, it's impossible to tell.
    However, I can tell you that currently the most any MacBook Pro supports is 4GB of RAM - two 2GB DIMMs.
    I don't know the Digg article you're referring to, but it's highly unlikely that it's referring to laptop memory. It's likely to be full-sized DIMMs where space and power consumption are less important factors (all laptops use low-profile DIMMs which consume less power and take up less space than DIMMs used in desktop computers).

  • How much RAM can PS CS4e use in Mac OS 10.5.x?

    I've tried to track this down from a number of places, but can't get an answer. I'm assuming the same as CS3e, which is a little over 3 GB.
    I'm getting ready to build a new MacPro and I need to decide how much RAM to add initially. I'm a Mac tech, so pretty good at building kick-but systems, but I don't have CS4e yet, so can't figure this one out for myself. I usually max out my systems, but I don't think I can really utilize a full 32 GB of RAM with CS4 suite, but perhaps CS5. No sense in getting more RAM at this point in time, when I could use those dollars for good glass to take more pictures with! ;-)
    And FYI, real PS performance comes from using 10K rpm drives for startup/apps and a second one for Scratch.

    Jerry,
    That's a very important Tech Note. Thank you for pointing it out.
    EXCERPT:
    Allocating Memory with 64-bit Processors
    Photoshop can directly access 3.5 GB of RAM when run on Mac OS (10.4.11 or later). If you have additional RAM on your computer, the RAM above 4 GB is used by the operating system as a cache for the Photoshop scratch disk data. Data that previously was written directly to the hard disk by Photoshop is now cached in this high RAM before being written to the hard disk by the operating system. If you are working with files large enough to take advantage of these extra 2 GB of RAM, the RAM cache can increase performance of Photoshop.
    When you run Photoshop CS4 on a 64-bit operating system Photoshop can access up to 8 GB of RAM. You can see the actual amount of RAM Photoshop can use in the Let Photoshop Use number when you set the Let Photoshop Use slider in the Performance preference to 100%. The RAM above the 100% used by Photoshop, which is from approximately 3 GB to 3.7 GB, can be used directly by Photoshop plug-ins (some plug-ins need large chunks of contiguous RAM), filters, and actions. If you have more than 4 GB (to 8 GB), the RAM above 4 GB is used by the operating system as a cache for the Photoshop scratch disk data. Data that previously was written directly to the hard disk by Photoshop is now cached in this high RAM before being written to the hard disk by the operating system. If you are working with files large enough to take advantage of that extra RAM, the RAM cache can increase performance of Photoshop.

  • How much RAM can I put into my Macbook Pro?

    Here's my info:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro4,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          2 GB
      Bus Speed:          800 MHz
    I want to upgrade my RAM, as the computer is showing a bit of age at 3 years old now.  I looked at this support page:
    http://support.apple.com/kb/HT1270#link8
    And judged the installation to be easy enough for me to do, but I'm confused as to how much RAM I can buy.  The conflict I see is that "Additional notes" says I can use up to 8GB of RAM, but the table says only 4GB.  What's throwing me off is basic math -- is that 4GB only referring to my slots (thus 4+4=8) or is it saying that anything over 4GB will not be recognized by my computer?
    I spoke with someone at Apple, but he seemed a bit confused by my question, and eventually gave me a "yes" that was timid enough that I felt the need to post here.  So, I'd appreciate the support!  Thanks a lot, everyone.  I'm just looking to not spend more than I need (in terms of buying excess RAM), and make sure I don't ruin my Mac in the process.

    The MacBook Pro 4,1 can acces a maximum RAM of 6GB
    However RAM comes in 4GB modules and you have two slots, so you install 8GB (two 4GB modules) and can only access 6GB of it according to MacTracker.
    Use the free Crucial.com site to make sure your getting the extact specified RAM specs, you can buy it anywhere if you like.
    http://www.crucial.com/
    (no comp)

Maybe you are looking for

  • CardLayout does not work

    I'm building a dynamic UI which has "x" number of labels and "x" no of fields. I'm able build the UI. When I make a selection in the ComboBox the UI(labels and fields change). For this I'm using a cardlayout. It does not seem to work. AttributesPanel

  • How to fix completely submerged iPad mini

    my iPad mini managed to get thrown in the washer with some laundry this morning. It wasn't in there very long, but long enough to be a problem. I took it out of its case and put it in a sealed container with rice. any other suggestions on how to fix

  • Client:Forms10g - RedHatLinux 9.x - Mozilla - Sun Java Plugin 1.4.2_03

    Hello, There seems to be a display problem starting Webforms 10g on a Linux Redhat Client. The display (font size) is very small. The Size and diplay of the forms bottom status bar is ok. Is there a problem with Arial fonts? We tried to change the Fo

  • Oracle Forms in R11i apps Q how to requery when called form is closed

    Scenario: I have formA. I am calling another formB from FormA. When I do update on Form B and close the control needs to come back to formA and requery (so I can see changes to the updates done in formB). Issue: I'm successfully launching formB (usin

  • HTML Editor size limitation?

    Hi,<br> I'm using Apex 3.1 on Oracle 10g...<br> Is there a size limitation on the number of characters in the HTML Editor? <br> We have a Report/Form combo for a column. clicking on the "Edit" Link from the Report takes you to the Form where you can