How much RAM can my 2.2GHz Intel Core 2 Duo Hold?

Hello everybody. My question, as written in the subject, is about the RAM in my 2.2GHz Intel Core 2 Duo Macbook Pro. I currently have 2GB and would like to move up to four. Can think particular model hold 4GB of RAM total? I believe the answer is yes but just want to make sure...
Thank you

rhythmproject:
Check out your RAM options here at OWC. If you choose to go for six GB you can pull one of the 1 GB modules and install a 4 GB module first for a total of 5 GB and later install the 2 GB module. Or just go the 6 GB at once, in which case you can get the matched pair. OWC offers a small trade in for the modules you pull.
Good luck.
cornelius

Similar Messages

  • How much RAM can my Macbook Pro (early 2011) actually hold?

    I currently only have 2x2 RAM in my Mac, but I've been reading I can put up to 16GB... Is this true?
    I want to upgrade to 16, but I'm unsure if my system will actually accept it or not, which is why I'm here...
    I've been reading on Apples site that it can only hold 2x4, and on other sites it can hold up to 2x8, which one is correct...?
    Thanks guys.
    (Bought in February 2011. 2.3GHz i5, 320GB SATA Disk.)

    16GB will be recognized.
    http://www.crucial.com/store/drammemory.aspx

  • How much Ram can I add to my MacBook Pro?

    Another non-techie here with a memory question
    How much RAM can I add to my MacBook
    Model Identifier: MacBookPro2,1
    MacBook Pro (late 2006)
    Processor 2.33GHz Intel Core 2 Duo
    Current memory: 2GB (two SO-DIMMs) 667 MHz DDRs SDRAM (PC2-5300)
    The actual installation sounds quite simple.  I just want to be sure I get the right chips.  Any sources you can recommend?
    TIA
    Jim

    http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2 .33-17-specs.html
    3 gb of ram as two modules of 2 gb each.
    Try http://www.macsales.com/

  • How much RAM can go into my Macbook Pro

    Hey, I wanted to ask how much RAM can go into my Mid 2012 Macbook Pro I looked at this guide http://support.apple.com/kb/HT1270?viewlocale=en_US#link1 and it said I can only but In 8 GB I want to put 16 GB but was wondering if this would ruin my computer. I am asking because I have heard about 16 GB going into many Macbooks   Thank you!
    Here are my specs 
    13-inch, Mid 2012
    Memory  4 GB 1600 MHz DDR3
    Processor  2.5 GHz Intel Core i5
    Graphics  Intel HD Graphics 4000 1024 MB
    Serial Number  C1MKLGFEDTY3
    Software  OS X 10.9.1 (13B42)
    Your Mac contains 2 memory slots, each of which accepts
    a 1600 MHz DDR3 memory module.
    If any more info is needed than plz tell me and I will ad it

    The site below is highly recommended by folks on the forum.
    http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade

  • How much ram can my iMac take?

    Hi all, just bought a iMac a few days ago and I'm just wondering how much ram can it take as I want to upgrade it. It didnt come with a manual, so I don't know.
    Here's the spec so far
    Early 2008 20"
    Processor  2.4 GHz Intel Core 2 Duo
    Memory  2 GB 667 MHz DDR2 SDRAM
    Graphics  ATI Radeon HD 2400 XT 128 MB
    Software  OS X 10.8.2 (12C60)
    Thanks for any help in advance

    There are two answers: the official Apple answer and the "you're on your own" answer.
    1 - For the official iMac max RAM, see iMac Memory specifications and upgrades
    2 - For the "your're on your own" answer, everymac.com has a list of the Actual Maximum RAM you can put in every model Mac.  In many cases this is more than the official maximum RAM.
    After deciding how much RAM you want to put in your iMac, I suggest going to Crucial.com and use the memory advisor or system scanner to see what RAM modules are compatible with your iMac.

  • How much ram can I install in macbook pro

    I have a 15" Macbook Pro with the 2.4GHZ processor.  Purchased in 2008.  How much RAM can I put in it?
    Thanks!  George

    Here is what I found.....
    Model Name: MacBook Pro
      Model Identifier: MacBookPro4,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.4 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 3 MB
      Memory: 2 GB
      Bus Speed: 800 MHz
      Boot ROM Version: MBP41.00C1.B00
      SMC Version (system): 1.27f3
      Serial Number (system): W881****YJZ
      Hardware UUID: 25EAF703-47DE-5074-AACB-10371AD4B7EE
      Sudden Motion Sensor:
      State: Enabled
    System Version: Mac OS X 10.5.8 (9L31a)
    <Edited by Host>

  • How much ram can i max out on imac 20 (2009 model)

    *Hi i have a APPLE MB417B/A iMac 20" MB417B/A*
    *what ram do i need? how much ram can i get? 4g? or 8g?*
    specs are as follows:
    With a 2.66GHz Intel Core 2 Duo processor, 2GB DDR3 RAM & NVIDIA graphics, iMac brings you more performance than ever. iMac packs performance inside a stunning all-in-one design. Includes Mac OS X.
    * 2.66GHz Intel Core 2 Duo Processor
    * Mac OS X v10.5 Leopard - Operating system
    * 2GB Memory - Run more applications
    * 320GB Hard Drive - Load up on photos,videos
    * 20'' Widescreen display - Vivid colours
    i'd be greatful for any help...

    Hello miss_papaya
    That model supports 2 4GB modules for a total of 8GB, only problem is that 4GB modules are currently at a premium price. Have a look at the spec's in the following article or in the User's Guide that came with your iMac.
    http://www.apple.com/imac/specs.html
    Also have a look at Crucial and OWC memory below:
    4GB kit > http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=60D83BBCA5CA7304
    8GB kit > http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=1D7DBABCA5CA7304
    OWC > http://eshop.macsales.com/shop/memory/iMac/DDR3_2009
    Dennis

  • How much ram can I put  In a 12" 867MHZ?

    Hi,
    I've just picked up a 12" 867mhz Powerbook for a very reasonable price! My question is how much ram can i put in it? It currently has 640mb. Also if i can put some more in it will it run Leopard?

    Bear in mind you can customise the install of Leopard to exclude some languages and particularly exclude printer drivers that aren't relevant to you, this will substantially lower the total required space. 12" Powerbooks are rather fiddly to work on - here's a really thorough guide on Hard drive replacement etc. for your Powerbook:
    http://www.ifixit.com/Guide/Mac/PowerBook-G4-Al-12-Inch/53

  • How much ram can I add to my late 2008 MacBook Pro? I run Mavericks and just got a new inexpensive hard drive. RAM is not very expensive so Thought I would bump it up from the current 2MB of 1067 Mhz DDr3

    How much ram can I add to my late 2008 MacBook Pro? I run Mavericks and just got a new inexpensive hard drive. RAM is not very expensive so Thought I would bump it up from the current 2MB of 1067 Mhz DDr3

    Maximum Memory
    8.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

  • How much RAM can be installed on a MacPro4.1?

    How much RAM can be installed on a MacPro4.1?

    physically 8 x 16GB, addressable in 10.8.3 is 96GB
    you still on snow leopard? you can also use that.
    6 x 8GB is probably more or as much as you need and try www.macsales.com/memory for kits

  • How much ram can be added to a 2007 SL Imac? has 1 gb now and I want to upgrade it; any suggestions?

    How much ram can be added to an 2007 Imac (SL, 10.6.8)? I'd like to upgrade it; any suggestions?

    Maximum Memory
    6.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM

  • Can a MacBook Pro1,1 - 2GHz Intel Core Duo be upgraded to Lion or even Leopard?

    Is it possible to upgrade the OS from Tiger to either Lion or Leopard on a MacBookPro1,1  2GHz Intel Core Duo (2006)?  Need to upgrade Adobe Creative Suite and Microsoft software...

    Here's something to consider. I see you have 1G RAM. That works well enough for Tiger 10.4. However, I think Leopard or Snow Leopard will be happier if you increase the RAM.
    Your MBP can handle up to 2G of RAM. It has two RAM slots'In your case, there would be one 512MB module in each slot. You could replace one 512MB module with a 1G module and have a total over 1.5G. That would be a big help. Or replace both. If you are in the US, RAM is not expensive (see: 2.0GB Upgrade Kit                 (1.0GB Modules x 2 Matched) for US$33), and the RAM is easily installed even by the most novice user.
    Here are the Apple Instructions for installing RAM in teh first Gen MacBook Pros:
    MacBook Pro (15-inch, Early 2008) and earlier

  • I have an iMac 2GHz Intel Core Duo, what is possible with Lion

    I have an iMac 2GHz Intel Core Duo,  is that possible to operate Lion with this iMac

    Here is the information about  downloading Lion when it is released in July.
    http://www.apple.com/macosx/how-to-buy/
    If you don't meet these requirements, as of now, you wouldn't be able to run Lion.  If anything changes, I am sure Apple will let us know.
    laverne's mom

  • I have a 5 year old MBP, 2GHz Intel Core Duo, 1GB MHz, DDR2 SDRAM, running Snow Leopard, 10.6.8.

    I have a 5 year old MBP, 2GHz Intel Core Duo, 1GB MHz, DDR2 SDRAM, running Snow Leopard, 10.6.8.
    I use wireless to connect to the Internet and everything works fine when I sign on.  After being on line for awhile and my remaining battery power at about 60%, I lose connectivity.  I turn off Airport, restart it, and I am asked for my secure password.  I enter the password but cannot reconnect.  So, I shut down the computer for 5 to 10 minutes, restart, and everything works great again.
    Has anyone experienced this behavior and do you have any suggestions as to what is causing the problem.
    Thanks for any help you can give me.
    Lowell

    I think I hit the wrong key ... so here it is again!
    Thank you ...  I keep seeing this i5 and i7 processor mentioned and it is also recommeded that I stream using it. Do you have any suggestions on which MacBook would serve me better? Or is there an upgrade of any kind that will help me?
    Thanks again.
    D

  • HT4854 When trying to download Mountain Lion, I get the following message:  "We could not complete your purchase.  OSX 10.8 Mountain Lion requires a Core 2 Duo, .... processor."  However, my Mac lists a 2GHz Intel Core Duo as its processor.  Help?

    When trying to download Mountain Lion, I get the following message:  "We could not complete your purchase.  OSX 10.8 Mountain Lion requires a Core 2 Duo, .... processor."  However, my iMac lists a 2GHz Intel Core Duo as its processor.  Help?

    Welcome to the Apple Support Communities
    Mountain Lion is a 64-bit operating system, and an Intel Core Duo processor is only 32-bit, so you can't use Mountain Lion on your Mac. You can keep using your actual OS X version or buy a new Mac if you want Mountain Lion

Maybe you are looking for

  • I just got a new iphone 5 yesterday. I can't get any of the apps to request access to my photos.

    I bought a new iphone 5c yesterday and am installing all of my apps on to it, and also updated to iOs 7.1.2.  None of the apps I have installed (such as instagram, facebook, twitter or messenger) have requested access to my photos so I can't use my p

  • Boot camp update affecting bluetooth?

    Hi, Last night I was using Windows Vista on my boot camp partition and I got the Apple Software update letting me know there was a new version of boot camp available. When I finished my work I set it to update and everything seemed to go smoothly. To

  • MacBook Pro Retina Crash Issue

    Hello I recent purchased a MacBook Pro with Retina Display on 08/02/12 it's been eight days and since original purchase date my MacBook has crashed four times. I'm on the verge of returning/exchanging it for a brand new MacBook assuming it's a hardwa

  • Flash Builder 4.6 - How can I keep unit test classes out of the finished swc?

         I have a library of code I'm building and I'm working on unit testing but I have a major issue. When my finished swc compiles no matter what I do it includes the unit test classes as part of the intellisense if you load the swc via flash. The cl

  • Problems in smartforms

    Hi Experts, In my smartforms, I want to print 3 decimal places instead of 2 decimal places for the values being printed. At occurrence of every new bank key in my internal table, I want to print on a new page. Please do help me. Points will be reward