How the Queue will be created to process the  Multiple IDOC's into  1 Queue

Hi Sap All.
when i went into the Transaction code we14 and when the press F4 for search help in the field  Queue Name it displays me the several queues with the Port referring to B0018(refers to PI Box) ,which means that the IDOC's will be sending to PI.
here my Question is how the Queues get created ,what is the Transaction code for creating the Queues in SAP-R/3 and how we we setup the SAP-R/3 Box in order to send multiple IDOC's into one queue.overall my question is how we wrok on Queues ?
could any body help me in driving me to the best way.
regards.
Seetharam.

If you have the drivers CD or the LV 6 installation CD, then you could try installing just the traditional DAQ drivers.  I will do a search if I can find them...Good news, I found the drivers that you may need.  Here is the link to download.
After you install it, look in the vi.lib folder for the DAQ folder and see if you have a dozen
.llb files. That is where you will find your missing vi's. You may also check into the LV2009 folder to check to
see if the driver got installed there. I think the driver only gets
installed for a single version and it might default to the latest at that time (I did not check which one it was).
In any case, look for the missing VIs in the \National Instruments\LabVIEW 2009\vi.lib\Daq\ folder.  The VIs are contained in the .llb files so you
can't just search for them through Windows.  Look in the AI.llb file using LabVIEW.
Here are issues that you may encounter.  The link is to the DAQmx driver (I thought it was for traditional DAQ )
http://forums.ni.com/t5/LabVIEW/Error-10461-10008-​DIO-Port-Config-Legacy-lvdaq-dll/m-p/947104
Someone with a similar problem.  It won't help you, but kinda explains what you are going through..
http://forums.ni.com/t5/LabVIEW/Since-upgrading-la​bview-many-sub-vi-s-such-as-DIO-Port-Config-vi/m-p​...
Although the recommendation in this thread is to use the same LV version and driver as the previous machine, we know it is not your case.  Newer LV version... and maybe the latest Traditional DAQ drivers...  May be worth reading:
http://forums.ni.com/t5/LabVIEW/An-error-occurred-​loading-VI-AI-Group-Config-vi/m-p/734547
Traditional DAQ 7.4.4
http://digital.ni.com/softlib.nsf/websearch/E42B7A​3564AB2F1A862572A7006D1564?OpenDocument

Similar Messages

  • How much time do I need to process the data

    Re. my previous question.
    I will be scanning 26 analogue channels at 7 khz into the PCI 6024E using a SCXI 1000 with an 1100 temperature module and the voltage signals going into the 1180 direct feedthrough.
    I would like to acquire up to 3 seconds of data at 7 khz on all 26 channels. I then would 'decimate' the 20 thermocouple channels down to a sample rate of about 700 hz from 7 khz and then display the temperature profiles on a chart and then write the data to disk for all 20 channels writing only the reduced number of samples for each channel.
    Two of the 7 khz inputs I would do an RMS calculation on and then display the results and also write the results of the RMS to a different file.
    The program then needs to
    be ready to sample new data again for three seconds.
    The computer is a P3 500 MHz with 327 MB ram.
    Another part of the question would be suggestions about how to write the program so that we could be sampling new data while the program is processing the old data and writing to disk.

    Hello mhtl,
    If your question is how long will it take to process the tasks you mentioned, there's really no way to tell. This not only depends on the machine, but how you implement it. Certainly, tasks such as this are possible. In fact, we have a good example program that shows you a good structure using threads and queues.
    Running Multiple Tasks in LabVIEW
    (Make sure you select the "advanced" VI inside the llb file.) This example puts the three tasks, acquire, analyze, and present into three separate threads so that they are all acting simultaneously. (Which I believe was your question.) In your "analyze" V
    I, you could be processing your data while the "show data" VI is simultaneously writing previous data to file. There is a good tutorial linked to the page I mentioned above as well. This topic is also covered in our LabVIEW Advanced training course if you're interested.
    I hope this helps!
    Russell
    Applications Engineer
    National Instruments
    http://www.ni.com/support

  • How many objects will be created due to constructor chaining

    Consider this case
    ChildClass obj = new ParentClass();
    I would like to know how many objects will be created in this process.

    Consider this case
    ChildClass obj = new ParentClass();
    I would like to know how many objects will be created
    in this processThe simple answer is one.
    The complex answer is many.
    In terms only of the classes that your code represents conceptually there will be one.
    The reality is that the the object itself might create objects. And loading the classes, if it has not already occurred will also create objects.

  • How accounting document will be created

    Hi,
    How accounting document will be created as soon as u save invoice? is there any configuration for this or is it SAP standard behaviour..
    Please explain....
    Regards
    Sankar

    Hi sankar
    In FBN1 we maintain number ranges for the accounting documents
    In billing document type details VOFA we have a field document type , which is for the accounting document type, if you keep that field blank system will take by take RV accounting  document type and if you enter any other accounting  document type  in that field then system will take that accounting  document type only . But it is better to leave that field blank .
    In OBA7 we have all accounting  document types details
    Regards
    Srinath

  • Report execute time nd how many records will be returned before hitting the "run" option?

    Post Author: Prasad15
    CA Forum: WebIntelligence Reporting
    Is there any way to know how long the report executes and how many records will be returned before hitting the "run" option?
    Regards
    Prasad

    To know if the report is going to return more than 10,000 records, you first have to run the query with a 'select count(1) from ... where ...' (with the same from and where clauses as you normal query). Since this takes about the same time as runnng your report, I wonder if you really gain anything (although formatting may take some time too).
    You may simplify the select count(1) query by omitting all the lookup tables that are only needed for formatting. That way your query may run a lot faster. You can put this in your after parameter form trigger.

  • How a submit will call a servelet in the form component

    how a submit will call a servelet in the form component

    Sunil, you want to look at the "Customizing the LiveCycle® Workspace ES User Interface" document at http://help.adobe.com/en_US/livecycle/9.0/customizeworkspaceui.pdf.  The workspace is a Flash component.  For ES4 there's an option to run the workspace in HTML5 which might be more productive long-term.

  • How can I delete apps off of my iPhone 4? I know the apps will begin to shake, but the "X" doesn't appear like it's suppose to. Help, please!!!!

    How can I delete apps off of my iPhone 4? I know the apps will begin to shake, but the "X" doesn't appear like it's suppose to. Help, please!!!!

    What apps are you trying to delete? Apps that come on the phones cannot be deleted in this fashion. Only apps you purchase from the app store can be deleted.

  • What is the best way to create shared variable for multiple PXI(Real-Time) to GUI PC?

    What is the best way to create shared variable for multiple Real time (PXI) to GUI PC? I have 16 Nos of PXI system in network and 1 nos of GUI PC. I want to send command to all the PXI system with using single variable from GUI PC(Like Start Data acquisition, Stop data Acquisition) and I also want data from each PXI system to GUI PC display purpose. Can anybody suggest me best performance system configuration. Where to create variable?(Host PC or at  individual PXI system).

    Dear Ravens,
    I want to control real-time application from host(Command from GUI PC to PXI).Host PC should have access to all 16 sets PXI's variable. During communication failure with PXI, Host will stop data display for particular station.
    Ravens Fan wrote:
    Either.  For the best performance, you need to determine what that means.  Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables?  If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
    You want to located the shared variable library on whatever machine is more critical.  That is probably each PXI machine, but only you know your application.
    Ravens Fan wrote:
    Either.  For the best performance, you need to determine what that means.  Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables?  If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
    You want to located the shared variable library on whatever machine is more critical.  That is probably each PXI machine, but only you know your application.

  • Command authorization failed - 'AAA API' detected the 'fatal' condition 'No method could process the authorisation request' % Incomplete command.

    we are using CISCO ASR 9006 . and we configured aaa authentication and commit changes after that i am able to login ASR with local user but
    no any command execute and get error.
    Command authorization failed - 'AAA API' detected the 'fatal' condition 'No method could process the authorisation request'
    % Incomplete command.
    please help.

    Hi Anop
    How did you get over this problem? I am having the same issue.
    Regards
    Rohan

  • My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

    My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

    Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
    Resolve specific iTunes update and restore errors

  • My Macbook Pro (OSX 10.6.7 2.26 GHz Intel Core 2 Duo) has started misbehaving on me. When I'm working, the cursor will start spontaneously moving to the left in a straight line, and randomly right clicking on things.  If I close the computer and open it b

    my Macbook Pro (OSX 10.6.7 2.26 GHz Intel Core 2 Duo) has started misbehaving on me. When I'm working, the cursor will start spontaneously moving to the in a straight line, and randomly right clicking on things.
    If I close the computer and open it back up, it sometimes stops for a little while, then will spontaneously start again. Any help would be truly appreciated. Thanks!

    See this knowledge base article. Also, you might want to update to 10.6.8 (don't know that that will fix your problem, but it's the latest version of Snow Leopard).
    Clinton

  • I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I h

    I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I have posted several times on the forum with no responses to address this, and have seen others with the same issue. I have even gone as far as to do a complete re-install of LR5, with no success. I'm at a loss, and I depend on it for so much editing. Please help.

    Reset your preferences file: Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums
    Report back if that doesn't work.

  • TS4006 My Apple iPod Touch 4th Generation was stolen if the thief signed out of my iCloud account on the device will it go away on the web map on my computer and keep me from locking it remotely?

    My Apple iPod Touch 4th Generation was stolen if the thief signed out of my iCloud account on the device will it go away on the web map on my computer and keep me from locking it remotely? I was asking my grandmother who works in apple tech support at at&t but she didnt know. so im hoping somebody will come by and say yes to my question because my iPod touch is still appearing in my iCloud.com account.

    Yes. If it was signed out from iCloud, it will disappear from the Devices list in Find my iPhone.

  • Dashboard has stopped working. The application will open, but none of the widgets will function. I've deleted widgets

    Dashboard has stopped working. The App will open, but none of the widgets will function. I've deleted widgets & added new ones, but they also will not work.

    I get the "License has stopped working" mesages too.
    We have a MacbookPro at home. There are two user-acounts on this mac, one for my wife and one for myself. This way we keep our personal stuff (e-mail, files, settings, dropbox, desktop clutter etc) separated. "Fast user switching" is enabled to easily switch to your personal account.
    Now when I open Photoshop I might get the dreaded "License has stopped working" message. This will happen if Photoshop is left open in her account. So I'll have to log into her account, close Photoshop, go back into my own acount and open Photoshop again.
    I should not get this message since Photoshop is not part of a particular user account, it is installed in the "Applications" folder which is accesible to all users.
    What makes it even more annoying is that I get the "License has stopped working" message on trying to open Photoshop even when Photoshop is closed in in the other acount, but Illustrator is opened.
    This makes no sense since we bought Photoshop and Illustrator CS3 as separate programs, not as a part of the Creative Suite.
    I did not report this to Adobe yet but it wil do that now.

  • The apps will not let me do the updates

    the apps will not let me do the updates

    controleur1 wrote:
    I have a similar problem. The only thing that is mentionned is unexpected reasons
    Are you receiving some type of error/message that tells you this?
    When are you seeing this?
    The software that I am trying to install are updates to system 10.7.4 to obtain 10.7.5.
    So you are not trying to update iTunes (this forum)?
    I recommend you post over here -> https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion
    with a bit more info.
    Which computer?
    When specifically do you get this message?
    Is this a message that pops up?
    Are any other porgrams running?
    Have you ran software update, etc.?

Maybe you are looking for

  • How is it that CloudFlare has become an obsticle to web browsing?

    I recently received this message when using safari. What gives? How is this bypassed? Error 1010 Ray ID: 11b9bc96253e0707 Access denied What happened? The owner of this website (woodlandscenics.woodlandscenics.com) has banned your access based on you

  • Forgot password and couldn't login to register ema...

    First , I am sorry about my English . I am having big problem with my skype account , I changed password 4 month ago and I can't remember it now,I use function "Reset password" in skype website but I couldn't login to my register email because this e

  • How to name a cell

    omg the most basic thing and I cant find it anywhere...how to name a cell? Instead opf refering to a cell as "a9", I would like to refer to it as "total"

  • Apache does not find index.php if not explicitly stated in URL

    I have googled for long over this (mod_dir ?) problem without success: My Apache is configured such that it fails to open this link (without trailing slash): http://bioinfo.tg.fh-giessen.de/cancer However, it manages to open if the trailing slash or

  • +/- Sign Change (Transact FSE2 or OB58)_Change Financial Statement Version

    Hi, In transaction FSE2 there is a buttom +/- "Sign Change", but if I mark or not, nothing differente happens. I need to display total of Assets with value negative (for example) Someone can help me? Tks. Soraia