How to access Oracle Apps 11i forms from Virtual Machine(Vmware Player)?

Hi,
I have installed Oracle Apps 11i on native OS OEL5 Server and Windows XPP on Virtual Machine using Vmware Player on standalone same desktop.Now how to access Oracle Apps 11i from Virtual Machine(Windows XPP)?
Thank's
Regard's
Rerry

Hi,
Sorry my instance is PROD instead of TEST.
1)Renamed the sqlnet.ora and make the following change in the tnsnames.ora (SERVICE_NAME = PROD) to (SID = PROD) and tryed but same error.
2)Only one oracle homes on the cleint machine
3)The output of tnsping PROD
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>tnsping PROD 5
TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 23-FEB-20
10 00:38:40
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=tcp)(HOST=SHUBH.hnp.com)(PORT=1521))
TNS-12570: TNS:packet reader failure
Normal ping is ok from both host to guest and guest to host.
Thank's
Regard's
Rerry

Similar Messages

  • How to access Oracle Apps 11i forms using Vmware Player?

    Hi,
    I have installed Oracle Apps 11i on native OS OEL5 Server and guest OS Windows XPP using Vmware Player.Now how to access Oracle Apps 11i forms from Windows XPP using Vmware on my OEL5 Server Desktop?
    Thank's
    Regard's
    Rerry

    Hi,
    If you mean how to access eBusiness Suite from within the Virtual Machine, then you just navigate to the same URL you normally would. You may need to put the machine alias in your hosts file if you are referencing it via machine name rather than IP address.
    If you mean that you want to load the form in forms builder (for example) then you need to FTP the form from server to client (as you normally would) and then open it in your client (XP virtual machine).
    If you want to use Workflow Builder (as per your original requirement) then you need to ensure that the TNSNAMES.ora file in the Workflow Builder home has an entry for your instance on Linux, and then you should be able to connect to the database directly.
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://www.workflowfaq.com/blog ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • How to access Oracle Apps from Linux or Unix Client

    I want to access Oracle Apps 11i from a linux client or Unix client, but I don't have jinit for linux or Unix
    regards,
    Jonathan

    Hi,
    That is not a problem just you can get in to linux inet browser and put the hostname.domainname.com:portnumber/OA_HTML/US/ICSINDEX.HTM
    So that you can get the apps sign on screen will be launched up and available to access in to Oracle applications.
    The work could be done in solaris browser and linux browser is possible.
    Thanks and Regards
    Riyaas
    Oracle Applications DBA
    [email protected]
    Kuwait

  • How to install oracle apps 11i on xp

    Hi
    iam new about oracle apps 11i, plz guide me how to install oracle apps 11i.on xp
    plz give proper step
    thanks

    Check the following links:
    Oracle EBS 11.5.10.2 Installation Steps
    Oracle EBS 11.5.10.2 Installation Steps
    Oracle Applications Installation Guide: Using Rapid Install
    http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/r115102ins.pdf
    Note: 316806.1 - Oracle Applications Installation Update Notes, Release 11i (11.5.10.2)
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=316806.1
    Note: 294932.1 - Recommendations to Install Oracle Applications 11i
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=294932.1

  • Cant Open Oracle Apps 11i Forms after installing latest JRE

    We are currently on Oracle Apps 11.5.10.2. I had to install latest JRE 1.6 Update23 to be able to work on BI Publisher Templates and now I can't open any of the Oracle Forms under eBusiness Suite. IE just crashes, doesnt show any message on JInitiator Console either. Same issue with Mozilla Firefox browser.
    FYI..I have a colleague who is able to work on both...BI Publisher Template Mgr and Oracle Fin Forms with latest JRE installed..So dont think its a server issue, its just my client setup. Any help is appreciated.
    Thx

    What is the difference between your client and your colleague client (in terms of client OS, browser, installed applications, ..etc)?
    Do you meet the requirements in (Recommended Browsers for Oracle E-Business Suite 11i [ID 285218.1])?
    Can you reproduce the issue with Firefox?
    Please see if these docs help.
    Internet Explorer Crashes When Forms Is Launched [ID 430359.1]
    MS IE Browser Crashes With 'Abnormal Program Termination or 'Register Failk' When Accessing Discoverer 10g From E-Business Suite 11i (forms) or Oracle Forms [ID 396773.1]
    INTERNET EXPLORER CRASHES WITH ORACLE APPS 11I AND MICROSOFT SILVERLIGHT ADD ON INSTALLED [ID 1077496.1]
    Internet Explorer Crash With Unexpected Signal EXCEPTION_ACCESS_VIOLATION [ID 435562.1]
    Thanks,
    Hussein

  • Putting Oracle Apps 11i on 10g RAC using VMware

    Hello All,
    I am building a Oracle Applications 11i on 10g RAC, using VMware..Since there aren't any docs I could find on internet explaining how to do this, I have come up with my own. I have combined the MEtalink doc:362135.1 and the docs describing building a 10gRAC "database" using VMware..I want to know if the below process is good enough to get the required results:
    Steps:
    -Install VMware on HOST m/c
    -Configure 1st virtual m/c, say RAC1
    -Install RHEL on RAC1
    -Install 11i with 9i database on the local SCSI bus- SCSI 0:0
    -Install VMware client tools
    -Create a new ethernet adapter(for private interconnect) on RAC1
    -Create shared disks on RAC1
    -Partition the disks
    -Add the disks as RAW devices in /etc/rawdevices
    -Clone RAC1 to a new virtual m/c,say RAC2
    -Delete the 11i apps directories from its local SCSI bus..since these would be redundant on RAC2
    -Install Clusterware s/w on RAC1 using the same oraInventory that is used by the Applications 11i installation-
    -Install the 10g DB software and create ASM instances using dbca
    -Install Database componenets from 10g companion CD
    -Upgrade CRS abd DB s/w to 10.2.0.4
    -Upgrade the 9i database to 10g using dbua from the 10g ORACLE_HOME
    -Convert the newly upgraded 10g databse to RAC using the rconfig tool
    -Post migration steps for RAC
    -Enable AutoConfig on the Applications Database tier
    - Follow the "Establish Applications Environment for RAC" section from Doc:362135.1
    -Configure PArallel Concurrent Processing(PCP)
    Thanks,
    Sandeep

    (Considering that there are only 2 nodes the scenario the steps would be as follows:
    1. Install RAC using the steps provided at the link:
    http://oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
    2.On RAC1 create a single instance of Oracle 11i (Both DB and Apps are on the same node)
    3. Follow the steps outlined in the Note:362135.1
    One thing to note is that the steps are the same whether the nodes are real or virtual.

  • How to access Oracle 11.5.5 from another node

    Hi,
    I have installed Oracle 11.5.5 on Windows NT4.0. I could access it on the same machine through the internet explorer by typing http://computername.domain name:8002/OA_HTML/US/ICXINDEX.htm
    Now i want to access application from another machine. How to do it?. Can i find any help documents on this & where?
    Please help me on this.
    Thanks & Regards,
    Arun
    [email protected]

    Hi
    i installed 11.5.5 , but when I log in , it prompts me for again to Login,
    after that (ie, 2nd time), it allows to log in.
    when i click on any module option, the system exits totally from the APPS.
    PL. let me know if u have any solution
    also let me know about how to set up client as u r disscussing,
    my server configuration : NT SERVER , SP 6, 256 MB RAM, P4 40 GB
    TKS
    NR

  • How to Access DATA, Physical Flash Drive from Host machine

    Hello Everyone,
    First i am sorry for My English also if i post wrong place.
    In HyperV, I created 3 VM machines, and i want each machines can access to Data or Flash Drive from Host machine.
    THanks you so much!
    Regards
    VeasnaYim

    Hi,
    The Hyper-V forum is here:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
    But, your question is relatively simple.  You will need to use standard Windows networking to access data from the host machine.  Depending on your version of Hyper-V, connecting to it via RDP from the host machine can use the RDP client's ability
    to access the host drives also.

  • How to access Oracle Apps R12.1.1 from Linux

    Greetings!
    I have managed to install the R12.1.1 Vision instance on a Linux server and can access the Applications from windows Client, but when I try to run the Applications from the Linux Server console (where it is installed) I am able to Login and Open the Responsibilities page. But as soon as I click on any Oracle Forms function (Java Applet) it asks to install the J2SE Plug-in (like a Window Client). Therefore, I cannot open any Form :(
    Any guidance on how to run the Applications on the Linux Server Console ?
    TIA.

    I have managed to install the R12.1.1 Vision instance on a Linux server and can access the Applications from windows Client, but when I try to run the Applications from the Linux Server console (where it is installed) I am able to Login and Open the Responsibilities page. But as soon as I click on any Oracle Forms function (Java Applet) it asks to install the J2SE Plug-in (like a Window Client). Therefore, I cannot open any Form :(
    Any guidance on how to run the Applications on the Linux Server Console ?Linux is NOT certified as a client tier.
    Linux Client
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Linux+AND+Client&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]
    Thanks,
    Hussein

  • How to access root apps folder again in Time Machine after a restore?

    I just did a Time Machine full system restore which worked, but now it doesn't look like Time Machine is backing up my root level apps folder. All of my root apps were indeed restored, but if I try to go into Time Machine with my (root) Apps folder open, it switches the folder contents to my user apps instead so I don't have access to the root apps in TM. It doesn't appear to be backing them up at the root level anymore either (nothing in the exclusions that would cause this). Any ideas on what happened here? I have just one admin level account on this machine.

    cubytus wrote:
    Hi everyone,
    I just reformated the MacBook hard drive using Extended HFS+, journaled partition to get rid of the case-sensitiveness, which is incompatible with just ONE of my softwares. As such, TM partition is formatted as Extended HFS+, journaled and case-sensitive.
    This mis-match is likely to cause trouble in the future. If you have, for example, two files named "FileA" and "filea" in the same folder on the TM drive, and try to restore them to your case-ignorant HD, TM is going to have a problem. I've never tried it, so I can't tell you whether it will overlay the first one it restores with the second, or crash, or what, but it can't be done.
    And you may have some of these without realizing it -- if you ever changed a capital to lower-case, or vice-versa, after a file's initial backup, it's a possibility.
    Indeed, I checked directly in the Time Machine tree on the external hard drive with Apple+I keys, and 'cubytus' was not listed in the permissions.
    No, TM automatically denies everything to everybody, among other things, in it's backups, to keep us mere mortals from messing with them. The original file permissions are kept separately, and TM should restore them along with the files, as they were.
    What you're probably seeing is, the user that you're signed-on as won't have those permissions, once TM restores the files. I'd suggest trying the same procedure as your other, or original user -- see if you get the same message.

  • Oracle HTTP server, Oracle 9iAS server, Oracle APPS 11i

    Hi, expert:
    I was reading the Oracle Applicaitons Concepts (11i). There three tiers in Apps. In the middle tier there are: Web Server, Forms Server, Concurrent Processing Server, Reports Server and Admin Server.
    But when I look our company's EBS architecture below (middle tier only here), I am confused. Does 9iAS includs HTTP server? Or 9i is the middle tier? what is Apps 11i? We have Unix and 11.5.10.2.
    Oracle HTTP server
    Oracle 9iAS
    Oracle Apps 11i
    Forms server
    Concurrent Manger
    Really appreciate you to help me.
    Edited by: 870765 on Jul 13, 2011 9:41 AM

    Oracle HTTP server
    Oracle 9iASThis is the web service component -- $IAS_ORACLE_HOME
    If you stop those services you will not be able to access the main login page or any Self-Service page in the application.
    Oracle Apps 11iThis is the application release (which is a group of components/tiers) -- 11i means 11.5.x (where x is from 1 to 10) or 11.5.10.1 (CU1), 11.5.10.2 (CU2)
    Oracle Apps 11i comes with 3 ORACLE_HOMEs (Web: $IAS_ORACLE_HOME, Developer (Forms/Reports): 8.0.6 ORACLE_HOME, Database: $RDBMS_ORACLE_HOME).
    Oracle Apps 11i = Oracle Application Tier ($APPL_TOP, $COMMON_TOP, iAS ORACLE_HOME, 8.0.6 ORACLE_HOME) + Oracle Database Tier (RDBMS ORACLE_HOME).
    Forms serverThis is Oracle Developer 6i home -- 8.0.6 ORACLE_HOME
    If you stop the forms server you cannot open any form.
    Concurrent MangerThis component is not represented in a separate ORACLE_HOME and the executable files can be found under $APPL_TOP directory ($FND_TOP/bin).
    If you stop the CM, you cannot submit concurrent requests but you can still access the application and open the forms.
    If you stop the database, you cannot access any part of the application.
    Thanks,
    Hussein

  • How to access oracle appa tables

    Can someone pls tell me how to access oracle apps tables
    eg po_vendors of purchasing.

    You can get them in this way select * from tab; this will give you a list of all the tables but if you are looking for a specific module like say Order Management then you could do it this way; select * from tab where tname like 'OE%'.

  • How to access virtual folder in oracle apps 11i?

    Hi,
    how to access virtual folder in oracle apps 11i?
    Version=11.5.10.2
    please help
    Thanks,

    I'd use BI Publisher (XML Publisher) Bursting.
    Regards,
    Gareth
    http://garethroberts.blogspot.com
    http://www.virtuate.com

  • How to  access the ORACLE APPS table structures from SAP

    Hi Experts,
        How to  access the ORACLE APPS table structures from SAP? Is it possible from SAP?
    Thanks in advance
    Thomas

    Hi Silviya,
    you can access this database using a technique called DB Multiconnect - sometimes written as multi-connect.
    Search the SAP documentation and notes for this term and you will find how to do it.
    Essentially you configure the remote database connection via transaction DBCON.
    If your SAP system is not running on Oracle you will need to install the db-specific kernel files for Oracle along with the Oracel db client software - SQL*Net.
    Then you can access the Oracle database from ABAP using native-SQL. It works a treat!
    Cheers
    Graham Robbo

  • Oracle Apps 11i Access from external harddisk

    Hi..I recently got Oracle Apps11i installed in external harddisk.I am trying to access the sofware from my laptop..Which is by the way giving me hard time....My Laptop supports windows7 Os and my Apps support windows 2003....I am trying to access the Apps s/w using Virtual m/c.I am facing problem while creating Virtual MAchine.Can anyone help me out here...Thank you

    When I am trying to power on the virtual machine it is not responding...While creating virtual machine it is asking guest operating system and I specified the one the oracle apps s/w supports(windows 2003)...and is it like lapto and external hard disk should support same OS??Wat is the solution for this??thank you

Maybe you are looking for